Allogeneic bone marrow transplantation for chronic granulomatous disease.

J. Rappeport,P. Newburger,R. Goldblum,A. Goldman,D. Nathan,R. Parkman

DOI: https://doi.org/10.1016/S0022-3476(82)80017-6

IF: 2.99

1982-12-01

Jornal de Pediatria

Abstract:

What problem does this paper attempt to address?

DNA-Templated Click Ligation Chain Reaction Catalyzed by Heterogeneous Cu 2 O for Enzyme-Free Amplification and Ultrasensitive Detection of Nucleic Acids

Fan Wang,Chenglong Bao,Susu Cui,Jinlong Fan,Zijie Zhang,Weiwei Yang,Yongsheng Yu,Yingfu Li

DOI: https://doi.org/10.1021/acs.analchem.4c01663

IF: 7.4

2024-06-11

Analytical Chemistry

Abstract:Nucleic acids play a pivotal role in the diagnosis of diseases. However, rapid, cost-efficient, and ultrasensitive identification of nucleic acid targets still represents a significant challenge. Herein, we describe an enzyme-free DNA amplification method capable of achieving accurate and ultrasensitive nucleic acid detection via DNA-templated click ligation chain reaction (DT-CLCR) catalyzed by a heterogeneous nanocatalyst made of Cu(2)O (hnCu(2)O). This hnCu(2)O-DT-CLCR method is built on two...

chemistry, analytical
Hydroxylamine-Amplified Gold Nanoparticles For The Homogeneous Detection Of Sequence-Specific Dna

Aiping Fan,Sheng Cai,Zhijuan Cao,Choiwan Lau,Jianzhong Lu

DOI: https://doi.org/10.1039/c0an00007h

2010-01-01

The Analyst

Abstract:Herein, we report the development of a simple, sensitive, inexpensive, and homogeneous detection method for the analysis of DNA hybridization based on the optical properties of hydroxylamine-amplified gold nanoparticles (Au NPs) in solution phase. The assay relies on a sandwich-type DNA hybridization in which DNA targets are first hybridized with capture DNA probes immobilized on the surface of magnetic beads and then sandwiched with Au NPs modified with biotinylated reporter DNA. Au NPs, after being anchored on the magnetic beads, are then dispersed in solution by the dehybridization and enlarged by using a mixture of HAuCl4 and NH2OH. The Au NP growth signal which is used for the quantitative analysis of sequence-specific DNA can be easily monitored by the naked eye directly or an UV-vis spectrophotometer. Surface plasmonic signature of the enlarged Au NPs and the kinetics of the Au NP growth in the homogenous phase containing of HAuCl4 and NH2OH have also been studied. As a result, such a homogeneous assay allows the detection of 30-base DNA targets down to the 100 amol level, which offers great promise for facilitating sensitive detection of other biorecognition events.
Dual-Mode Ultrasensitive Detection of Nucleic Acids Via an Aqueous "seesaw" Strategy by Combining Aggregation-Induced Emission and Plasmonic Colorimetry

Jianlei Shen,Yiru Zhang,Rong Hu,Ryan T. K. Kwok,Zhiming Wang,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acsanm.8b01773

IF: 6.14

2019-01-01

ACS Applied Nano Materials

Abstract:Development of simple, robust, and reliable nucleic acid detection strategy holds tremendous promise for cancer or pathogen diagnostics. However, in traditional fluorescent assays, tedious chemical labeling and enzyme-based signal amplification are usually required. Developing label-free, enzyme-free nucleic acid detection strategies is of great significance. In this paper, through combining the hybridization chain reaction (HCR) technique with aggregation-induced emission (AIE)-based fluorometric assay and a gold-nanoparticle-based colorimetric assay, we developed a "seesaw" strategy for label-free, enzyme-free visual detection of nucleic acids. Two sets of signals (solution tonality and fluorescence intensity changes) were generated for one test. The limit of detection of single-strand DNA can be as low as 37.2 fM. The proposed seesaw strategy that integrates fluorometric and colorimetric assay holds great potential for the point-of-care testing of nucleic acids.
Penrose hypothesis and ethical implications.

D. Diniz,Roberto Tykanori Kinoshita

DOI: https://doi.org/10.1111/dewb.12097

2015-12-01

Developing World Bioethics

Abstract:
Highly Sensitive and Selective Chemiluminescent Imaging for DNA Detection by Ligation-Mediated Rolling Circle Amplified Synthesis of DNAzyme

Haifeng Dong,Chen Wang,Yi Xiong,Huiting Lu,Huangxian Ju,Xueji Zhang

DOI: https://doi.org/10.1016/j.bios.2012.08.050

2013-01-01

Abstract:A highly sensitive DNA biosensing method down to sub-femtomolar level with excellent selectivity was proposed by designing an amplified synthesis of horseradish peroxidase mimicking DNAzyme and introducing the amplified DNAzyme to chemiluminescent (CL) imaging. The amplified synthesis was achieved by combining a target DNA related ligase reaction with rolling circle amplification (RCA), which produced thousands of repeated sequences to bind hemin and form a mass of horseradish peroxidase-mimicing DNAzyme units. The amplification strategy greatly enhanced the CL emission of the luminol–H2O2 system. The genotyping method displayed highly specific biochemistry in allele discrimination. The novel CL imaging strategy based on ligation-mediated RCA synthesis of DNAzyme showed high fidelity in discriminating single-base mismatch and efficiently facilitated signal amplification for sensitive target DNA detection. It could detect DNA ranging from 1×10−15M to 1×10−11M with a detection limit of 0.26fM. The proposed approach provided a robust, cost-efficient, highly sensitive and specific platform for genetic target analysis in bioanalysis and clinic biomedical application.
Fluorescent detection of copper(II) based on DNA-templated click chemistry and graphene oxide

Lifen Zhou,Qinpeng Shen,Peng Zhao,Bingbing Xiang,Zhou Nie,Yan Huang,Shouzhuo Yao

DOI: https://doi.org/10.1016/j.ymeth.2013.09.001

IF: 4.647

2013-12-15

Methods

Abstract:A novel DNA-templated click chemistry strategy for homogenous fluorescent detection of Cu(2+) has been developed based on click ligation-dependent DNA structure switch and the selective quenching ability of graphene oxide (GO) nanosheet. The clickable duplex probe consists of two DNA strands with alkyne and azide group, respectively, and Cu(+)-catalyzed alkyne-azide cycloaddition (CuAAC) reaction can chemically ligate these two strands. Toehold sequence displacement was consequently exploited to achieve DNA structure transformation bearing fluorescent tag FAM. Cu(2+)-induced chemical ligation caused the probe transfer to hybrid structure with single stranded DNA (ssDNA) tail, while only duplex structure was obtained without Cu(2+). This structural difference can be probed by GO-based fluorescence detection due to the preferential binding of GO to ssDNA. Under the optimum conditions, this sensor can sensitively and specifically detect Cu(2+) with a low detection limit of 58 nM and a linear range of 0.1-10 μM. This new strategy is highly sensitive and selective for Cu(2+) detection because of the great specificity of click chemistry and super-quenching ability of GO. Moreover, with the aid of high efficient DNA templated synthesis, the detection process requires only about half an hour which is much quicker than previous click-chemistry-based Cu(2+) sensors.
A Cascade Signal Amplification Strategy for the Ultrasensitive Fluorescence Detection of Cu2+ via λ-Exonuclease-Assisted Target Recycling with Mismatched Catalytic Hairpin Assembly

Zhen Liu,Chen Liu,Liqiong He,Jinquan Liu,Le Li,Shengyuan Yang,Yan Tan,Xing Liu,Xilin Xiao

DOI: https://doi.org/10.3390/bios13100918

2023-10-09

Biosensors

Abstract:Herein, an ultrasensitive DNAzyme-based fluorescence biosensor for detecting Cu2+ was designed using the cascade signal amplification strategy, coupling λ-exonuclease-assisted target recycling and mismatched catalytic hairpin assembly (MCHA). In the designed detection system, the target, Cu2+, can activate the Cu2+-dependent DNAzyme to cause a cleavage reaction, releasing ssDNA (tDNA). Then, tDNA binds to hairpin DNA (H0) with an overhanging 5′-phosphorylated terminus to form dsDNA with a blunt 5′-phosphorylated terminus, which activates the dsDNA to be digested by λ-Exo and releases tDNA along with another ssDNA (iDNA). Subsequently, the iDNA initiates MCHA, which can restore the fluorescence of carboxyfluorescein (FAM) previously quenched by tetramethylrhodamine (TAMRA), resulting in a strong fluorescent signal. Furthermore, MCHA efficiently improves the signal-to-noise ratio of the detection system. More importantly, tDNA recycling can be achieved with the λ-Exo digestion reaction to release more iDNA, efficiently amplifying the fluorescent signal and further improving the sensitivity to Cu2+ with a detection limit of 60 fM. The practical application of the developed biosensor was also demonstrated by detecting Cu2+ in real samples, proving it to be an excellent analytical strategy for the ultrasensitive quantification of heavy metal ions in environmental water sources.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
A Surface-Confined DNA Assembly Amplification Strategy on DNA Nanostructural Scaffold for Electrochemiluminescence Biosensing.

Qiu-Mei Feng,Yue-Hua Guo,Jing-Juan Xu,Hong-Yuan Chen

DOI: https://doi.org/10.1016/j.bios.2017.09.037

IF: 12.545

2018-01-01

Biosensors and Bioelectronics

Abstract:A critical challenge in surface-based DNA assembly amplification is the reduced accessibility of DNA strands arranged on a heterogeneous surface compared to that in homogeneous solution. Here, a novel in situ surface-confined DNA assembly amplification electrochemiluminescence (ECL) biosensor based on DNA nanostructural scaffold was presented. In this design, a stem-loop structural DNA segment (Hairpin 1) was constructed on the vertex of DNA nanostructural scaffold as recognition probe. In the present of target DNA, the hairpin structure changed to rod-like through complementary hybridization with target DNA, resulting in the formation of Hairpin 1:target DNA. When the obtained Hairpin 1:target DNA met Hairpin 2 labeled with glucose oxidase (GOD), the DNA cyclic amplification was activated, releasing target DNA into homogeneous solution for the next recycling. Thus, the ECL signal of Ru(bpy)32+-TPrA system was quenched by H2O2, the product of GOD catalyzing glucose. As a result, this proposed method achieved a linear range response from 50 aM to 10 pM with lower detection limit of 20 aM.
Simple colorimetric DNA detection based on hairpin assembly reaction and target-catalytic circuits for signal amplification.

Cuiping Ma,Wenshuo Wang,Zhaoxin Li,Lijie Cao,Qingyin Wang

DOI: https://doi.org/10.1016/j.ab.2012.07.009

IF: 2.9

2012-01-01

Analytical Biochemistry

Abstract:A simple strategy of colorimetric DNA detection is presented based on a hairpin assembly reaction and target-catalytic DNA circuits to achieve enzyme-free signal amplification. The method employed two hairpin species (H1 and H2), which were stable and unable to hybridize in the absence of target. In the presence of target, the target hybridized with hairpin H1 and the opened hairpin H1 hybridized with hairpin H2, allowing the target to be displaced. H1 and H2 were respectively attached to gold nanoparticles, allowing the duplex formed from H1 and H2 to be visualized with the naked eye. The displaced target again triggered the next round of strand exchange reaction to achieve signal amplification. The method may have a wide range of sensor applications because it is enzyme-free and simple to perform.
A novel fluorescence probe of dsDNA-templated copper nanoclusters for quantitative detection of microRNAs

Xin-Ping Wang,Bin-Cheng Yin,Bang-Ce Ye

DOI: https://doi.org/10.1039/c3ra23296d

IF: 4.036

2013-01-01

RSC Advances

Abstract:We have developed a facile and label-free method for sequence-specific microRNA detection using fluorescent dsDNA-templated copper nanoclusters as signal indicators. It is designed such that, the miRNA targets are transferred to the oligonucleotide reporters and act as the scaffold for the synthesis of fluorescent copper nanoclusters via an isothermal exponential amplification reaction, in which the unimolecular DNA designed for miRNA targets is employed as the amplification template with polymerases and nicking enzymes as mechanical activators. Under the selected conditions, the proposed assay allowed sensitive and selective detection of miRNAs with a linear range from 1 pM to 10 nM.

chemistry, multidisciplinary
A sensitive fluorescence assay based on aggregation-induced emission by copper-free click reaction for rapid ctDNA detection

Min Wang,Yujuan Zhao,Xuewen He,Ben Zhong Tang,Hong Liu,Yu Zhang,Lin Han

DOI: https://doi.org/10.1016/j.talanta.2023.124562

IF: 6.1

2023-04-19

Talanta

Abstract:A fluorescence assay was developed based on aggregation-induced emission for circulating tumor (ctDNA) rapid detection. AIE-based probe (TPE-DNA) was constructed via strain-promoted azide-alkyne cycloaddition reaction between the azide-functionalized TPE-N 3 and the dibenzocyclooctyne functionalized DNA. AIE-based assay displayed significant fluorescence signal enhancement for the ctDNA targets. The experimental results were verified and explained based on density functional theory simulations. As a proof-of-concept, the ctDNA as the target was detected to determine the feasibility of the assay. The detection could be done within 10 min with the limit of detection of 39 pM and good selectivity without the assistance of enzyme or nano-materials. Compared with traditional click reaction, the assay has advantages of high efficiency and good biocompatibility. It is promising in rapid diagnostic of cancer marker nucleic acid with further efforts to develop intelligent miniaturized equipment.

chemistry, analytical
Label-Free and Universal Fluorescence “Signal On” Strategy Based on Functional Nucleic Acids Via Energy Transfer between Dna-Templated Silver Nanoclusters and Gold Nanorods

Junyang Wang,Qian Zhang,Ying Li,Chuanyu Yang,Ting Lv,Xinyue Ma,Chunyan Sun

DOI: https://doi.org/10.2139/ssrn.3996075

2021-01-01

SSRN Electronic Journal

Abstract:A simple, low-cost and universal fluorescence “signal on” sensing strategy has been developed based on functional nucleic acids via energy transfer between DNA-templated silver nanoclusters (DNA-AgNCs) and gold nanorods (GNRs). Functional nucleic acids were used as highly selective recognition probes, in which an aptamer was used to detect small molecules represented by tetracycline and DNAzyme was used to detect heavy metal ions represented by Pb2+. The fluorescent DNA-AgNCs were synthesized by the designed oligonucleotide sequences, which consisted of three parts, including the AgNCs synthesis template C6G5C6, spacer T5 and complementary sequences of the aptamer or enzyme strand. The difference in electrostatic interactions between ss/dsDNA and positively charged GNRs leads to energy transfer with different efficiencies between ss/dsDNA-AgNCs and GNRs. The analytes represented by tetracycline and Pb2+ can destroy the dsDNA structure and reduce the energy transfer efficiency between DNA-AgNCs and GNRs, thus achieving fluorescence recovery and a "signal-on" analytical strategy. This strategy has excellent specificity and sensitivity with LODs of 106.3 pM for tetracycline and 58.9 pM for Pb2+ and has been successfully applied to detect tetracycline in milk and Pb2+ in river water. Using DNA-AgNCs formed in situ as signal probes, this strategy does not require labels or modifications and can be completed in 40 min without complex analytical instruments. Moreover, this strategy can be extended to detect other targets by replacing functional nucleic acid sequences. Therefore, it has promising prospects in the sensitive, simple and rapid detection of contaminants in food and environment samples.
A ligation-triggered DNAzyme cascade for amplified fluorescence detection of biological small molecules with zero-background signal.

Li-Min Lu,Xiao-Bing Zhang,Rong-Mei Kong,Bin Yang,Weihong Tan

DOI: https://doi.org/10.1021/ja203693b

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:Many types of fluorescent sensing systems have been reported for biological small molecules. Particularly, several methods have been developed for the recognition of ATP or NAD(+), but they only show moderate sensitivity, and they cannot discriminate either ATP or NAD(+) from their respective analogues. We have addressed these limitations and report here a dual strategy which combines split DNAzyme-based background reduction with catalytic and molecular beacon (CAMB)-based amplified detection to develop a ligation-triggered DNAzyme cascade, resulting in ultrahigh sensitivity. First, the 8-17 DNAzyme is split into two separate oligonucleotide fragments as the building blocks for the DNA ligation reaction, thereby providing a zero-background signal to improve overall sensitivity. Next, a CAMB strategy is further employed for amplified signal detection achieved through cycling and regenerating the DNAzyme to realize the true enzymatic multiple turnover (one enzyme catalyzes the cleavage of several substrates) of catalytic beacons. This combination of zero-background signal and signal amplification significantly improves the sensitivity of the sensing systems, resulting in detection limits of 100 and 50 pM for ATP and NAD(+), respectively, much lower than those of previously reported biosensors. Moreover, by taking advantage of the highly specific biomolecule-dependence of the DNA ligation reaction, the developed DNAzyme cascades show significantly high selectivity toward the target cofactor (ATP or NAD(+)), and the target biological small molecule can be distinguished from its analogues. Therefore, as a new and universal platform for the design of DNA ligation reaction-based sensing systems, this novel ligation-triggered DNAzyme cascade method may find a broad spectrum of applications in both environmental and biomedical fields.
Bioinspired Artificial “Clickase” for the Catalytic Click Immunoassay of Foodborne Pathogens

Xianlong Zhang,Yongning Wu,Juhong Chen,Yan Yang,Guoliang Li

DOI: https://doi.org/10.1021/acs.analchem.0c04732

IF: 7.4

2021-02-01

Analytical Chemistry

Abstract:The copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click reaction has drawn increasing attention in the field of analytical science. However, the poor stability of Cu(I) usually hinders not only the simplicity of the click reaction but also its applications in precise analyses. Therefore, the development of a nanocatalyst containing stable Cu(I) is of great significance for broadening the application of CuAAC-based assays. Herein, inspired by the active center structure of natural multicopper oxidases (MCOs), we successfully prepared a novel nanocatalyst containing abundant stable Cu(I) as an artificial "clickase" (namely, CCN) by using glutathione to stabilize Cu(I). The stability and enzyme-like catalytic activity in the CuAAC reaction of the prepared CCN clickase were studied, and the catalytic mechanism of the CCN clickase-mediated CuAAC reaction between 3-azide-7-hydroxycoumarin (Azide 1) and propargyl alcohol (Alkyne 2) was also revealed. Compared with the existing solid CuO nanocatalysts used in CuAAC-based assays, CCN clickases exhibited plenty of superior properties (including high stability, excellent catalytic activity, no requirements of dissolution and reducing agents/radical initiator during the detection, well-defined porosities benefiting the substrate diffusion, and good biocompatibility), which can greatly increase the reaction efficiency and shorten the detection time. Encouraged by these remarkable performances, CCN clickases were used as labels to establish a new catalytic click fluorescence immunoassay for foodborne pathogens. Notably, the proposed CCN clickase-based immunoassay exhibited high analytical performances for the quantification of Salmonella enteritidis in the linear range of 102-106 CFU/mL with a limit of detection as low as 11 CFU/mL. The developed method has also been used in the determination of S. enteritidis in food samples, showing its great potential in the detection of foodborne pathogens.

chemistry, analytical
An enzyme-free and label-free assay for copper(II) ion detection based on self-assembled DNA concatamers and Sybr Green I.

Chenchen Ge,Junhua Chen,Wei Wu,Zhiyuan Fang,Lingbo Chen,Qi Liu,Lin Wang,Xuerong Xing,Lingwen Zeng

DOI: https://doi.org/10.1039/c3an00973d

2013-01-01

Abstract:An enzyme-free and label-free fluorescence turn on biosensor for amplified copper(II) ion (Cu2+) detection has been constructed based on self-assembled DNA concatamers and Sybr Green I. This assay is simple, inexpensive and sensitive, enabling quantitative detection of as low as 12.8 pM Cu2+.
High-throughput Ultra-Sensitive Discrimination of Single Nucleotide Polymorphism Via Click Chemical Ligation.

Qian-Yu Zhou,Xin-Ying Zhong,Ling-Li Zhao,Li-Juan Wang,Ying-Lin Zhou,Xin-Xiang Zhang

DOI: https://doi.org/10.1039/c9an01672d

2020-01-01

Abstract:Single nucleotide polymorphisms (SNPs) have been proven to be important biomarkers for disease diagnosis, prognosis and disease pathogenesis. Here, taking the advantages of a self-assembled oligonucleotide sandwich structure and robust chemical reactions, we have developed a simple, high-throughput and effective colorimetric analytical technique termed CuAAC-based ligation-assisted assays (CuAAC-LA) for SNP detection using a DNA-BIND 96-well plate. With the 5'-azide and 3'-alkyne groups labelled on two oligonucleotide probes, the target DNA can direct a Cu(i)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction. Since the small difference in duplex stability caused by a single-nucleotide mismatch was amplified by the steric effects of these reactive groups for the ligation reaction of an unstable duplex, CuAAC-LA exhibited an ultra-sensitive discrimination ability for a mutant type target in the presence of large amounts of wild type targets. As low as 0.05% SNP could be clearly detected, which was better than most previously reported methods by various DNA ligases, indicating that a simple and rapid synthetic method i.e., the DNA template-directed click reaction held the potential to replace the ligase for SNP detection.
Surface-initiated DNA self-assembly as an enzyme-free and nanoparticle-free strategy towards signal amplification of an electrochemical DNA sensor.

Yuanqin Zheng,Yulin Li,Na Lu,Zhaoxiang Deng

DOI: https://doi.org/10.1039/c0an00761g

2011-01-01

Abstract:Surface-initiated DNA polymerization has been employed in this work as an appealing signal amplification strategy for electrochemical DNA sensors. This strategy is especially superior in that enzymes, colloidal particles and other bulky structures are not involved in order to achieve amplified signals, and thus is highly promising in circumventing problems due to uncontrolled nucleation, adsorption, aggregation or disassembly of nanoparticles, liposomes and proteins, as well as enzyme deactivations. Our preliminary results have shown that a decrease (as compared to an amplification-free system) in detection limit by a factor greater than 300 can be easily achieved by cyclic voltammetry under still not optimized conditions, with an ability of differentiating a single base mutation.
Highly Sensitive and Selective Copper (II)-Catalyzed Dual-DNAzyme Colorimetric Biosensor Based on Exonuclease III-Mediated Cyclical Assembly

Baiqiang Zhai,Kunlun Huang,Hongtao Wang,Dongmin Su,Yuancong Xu

DOI: https://doi.org/10.3390/catal11111352

IF: 3.9

2021-11-11

Catalysts

Abstract:“Cu-DNAzyme” and “G4-DNAzyme” were used to develop a “turn-off” dual-DNAzyme colorimetric biosensor, which could be used to detect Cu2+ by employing exonuclease III-mediated cyclical assembly (EMCA). EMCA was based on the cleavage activity of Cu2+ to transfer the linkage sequences of the substrate strand and enzyme strand into the transition sequence. The horseradish peroxidase (HRP)-mimicking activity of the G4-DNAzyme was lost after binding with the complementary transition sequence and was hydrolyzed by Exo III. These results demonstrate that the proposed colorimetric biosensor was an effective method for ultradetection of trace metals in a high original signal background. Due to the high sensitivity of the biosensor, the limit of detection (LOD) of Cu2+ is 0.16 nM. This design offers a general purpose platform that could be applied for the detection of any metal ion target through adjustment of metal-dependent DNA-cleaving DNAzymes, which is of great significance for the rapid determination of food safety.

chemistry, physical
Copper ions coordination-promoted self-assembly of DNA nanoflowers as cascade catalytic nanoreactor for colorimetric biosensor

Zhenjie Qiao,Shuzhen Yue,Xiaoyue Zhang,Pengfei Shi,Shuzhen Lv,Sai Bi

DOI: https://doi.org/10.1016/j.talanta.2024.127049

IF: 6.1

2025-01-01

Talanta

Abstract:The controllable geometry and multifunctionality of DNA nano-bioreactors hold immense promise for disease diagnosis. Herein, a facile rolling circle amplification (RCA)-based crystallization method has been developed for highly efficient self-assembly of three-dimensional (3D) DNA nano-bioreactors, which show excellent cascade catalytic performance by confining bio-enzyme (glucose oxidase (GOx) used in this case) and copper ions (Cu2+) in DNA nanoflowers (DNFs) structure. The participation of Cu2+ during the self-assembly process not only endows the nano-bioreactors (designated as GOx/Cu@DNFs) with inspiring peroxidase-like activity but also greatly improves the assembly efficiency and yield via the effective coordination between Cu2+ and RCA-generated long concatemeric DNAs. The integration of GOx and Cu2+ in the constrained flower-like DNA nanomatrices makes for the efficient inter-catalyst communication, resulting in the striking enhancement of biocatalytic cascade activity. Based on the prepared nano-bioreactors, a colorimetric biosensor has been constructed for glucose detection, achieving a wide linear range (2-400 μM) and a low detection limit (0.45 μM). Furthermore, the proposed sensing strategy enables the accurate determination and discrimination of glucose levels in healthy and diabetic sera, delivering gratifying outcomes. Overall, the meticulously crafted cascade nano-bioreactors not only illuminate the design of multifunctional nanomaterials based on RCA, but also expand the conceptual framework of the universal analytical method for determining small molecules with catalytic reactions to generate H2O2.
DNA Nanoribbon-Templated Self-Assembly of Ultrasmall Fluorescent Copper Nanoclusters with Enhanced Luminescence

Xiangyuan Ouyang,Meifang Wang,Linjie Guo,Chengjun Cui,Ting Liu,Yongan Ren,Yan Zhao,Zhilei Ge,Xiniu Guo,Gang Xie,Jiang Li,Chunhai Fan,Lihua Wang

DOI: https://doi.org/10.1002/anie.202003905

2020-07-13

Abstract:Fluorescent copper nanoclusters (CuNCs) have been widely used in chemical sensors, biological imaging, and light-emitting devices. However, individual fluorescent CuNCs have limitations in their capabilities arising from poor photostability and weak emission intensities. As one kind of aggregation-induced emission luminogen (AIEgen), the formation of aggregates with high compactness and good order can efficiently improve the emission intensity, stability, and tunability of CuNCs. Here, DNA nanoribbons, containing multiple specific binding sites, serve as a template for in situ synthesis and assembly of ultrasmall CuNCs (0.6 nm). These CuNC self-assemblies exhibit enhanced luminescence and excellent fluorescence stability because of tight and ordered arrangement through DNA nanoribbons templating. Furthermore, the stable and bright CuNC assemblies are demonstrated in the high-sensitivity detection and intracellular fluorescence imaging of biothiols.

Allogeneic bone marrow transplantation for chronic granulomatous disease.

DNA-Templated Click Ligation Chain Reaction Catalyzed by Heterogeneous Cu 2 O for Enzyme-Free Amplification and Ultrasensitive Detection of Nucleic Acids

Hydroxylamine-Amplified Gold Nanoparticles For The Homogeneous Detection Of Sequence-Specific Dna

Dual-Mode Ultrasensitive Detection of Nucleic Acids Via an Aqueous "seesaw" Strategy by Combining Aggregation-Induced Emission and Plasmonic Colorimetry

Penrose hypothesis and ethical implications.

Highly Sensitive and Selective Chemiluminescent Imaging for DNA Detection by Ligation-Mediated Rolling Circle Amplified Synthesis of DNAzyme

Fluorescent detection of copper(II) based on DNA-templated click chemistry and graphene oxide

A Cascade Signal Amplification Strategy for the Ultrasensitive Fluorescence Detection of Cu2+ via λ-Exonuclease-Assisted Target Recycling with Mismatched Catalytic Hairpin Assembly

A Surface-Confined DNA Assembly Amplification Strategy on DNA Nanostructural Scaffold for Electrochemiluminescence Biosensing.

Simple colorimetric DNA detection based on hairpin assembly reaction and target-catalytic circuits for signal amplification.

A novel fluorescence probe of dsDNA-templated copper nanoclusters for quantitative detection of microRNAs

A sensitive fluorescence assay based on aggregation-induced emission by copper-free click reaction for rapid ctDNA detection

Label-Free and Universal Fluorescence “Signal On” Strategy Based on Functional Nucleic Acids Via Energy Transfer between Dna-Templated Silver Nanoclusters and Gold Nanorods

A ligation-triggered DNAzyme cascade for amplified fluorescence detection of biological small molecules with zero-background signal.

Bioinspired Artificial “Clickase” for the Catalytic Click Immunoassay of Foodborne Pathogens

An enzyme-free and label-free assay for copper(II) ion detection based on self-assembled DNA concatamers and Sybr Green I.

High-throughput Ultra-Sensitive Discrimination of Single Nucleotide Polymorphism Via Click Chemical Ligation.

Surface-initiated DNA self-assembly as an enzyme-free and nanoparticle-free strategy towards signal amplification of an electrochemical DNA sensor.

Highly Sensitive and Selective Copper (II)-Catalyzed Dual-DNAzyme Colorimetric Biosensor Based on Exonuclease III-Mediated Cyclical Assembly

Copper ions coordination-promoted self-assembly of DNA nanoflowers as cascade catalytic nanoreactor for colorimetric biosensor

DNA Nanoribbon-Templated Self-Assembly of Ultrasmall Fluorescent Copper Nanoclusters with Enhanced Luminescence