Abstract:To explore the effects of freeze–thaw cycles on the mechanical properties and crack evolution of fissured sandstone, biaxial compression experiments were carried out on sandstone subjected to freeze–thaw cycles to characterize the changes in the physical and mechanical properties of fissured sandstone caused by freeze–thaw cycles. The crack evolution and crack change process on the surface of the fissured sandstone were recorded and analysed in detail via digital image technology (DIC). Numerical simulation was used to reveal the expansion process and damage mode of fine-scale cracks under the action of freeze–thaw cycles, and the simulation results were compared and analysed with the experimental data to verify the reliability of the numerical model. The results show that the mass loss, porosity, peak stress and elastic modulus all increase with increasing number of freeze–thaw cycles. With an increase in the number of freeze–thaw cycles, a substantial change in displacement occurs around the prefabricated cracks, and a stress concentration appears at the crack tip. As new cracks continue to sprout at the tips of the prefabricated cracks until the microcracks gradually penetrate into the main cracks, the displacement cloud becomes obviously discontinuous, and the contours of the displacement field in the crack fracture damage area simply intersect with the prefabricated cracks to form an obvious fracture. The damage patterns of the fractured sandstone after freeze–thaw cycles clearly differ, forming a symmetrical "L"-shaped damage pattern at zero freeze–thaw cycles, a symmetrical "V"-shaped damage pattern at 10 freeze–thaw cycles, and a "V"-shaped damage pattern at 20 freeze–thaw cycles. After 20 freeze–thaw cycles, a "V"-shaped destruction pattern and "L"-shaped destruction pattern are formed; after 30 freeze–thaw cycles, an "N"-shaped destruction pattern is formed. This shows that the failure mode of fractured sandstone gradually becomes more complicated with an increasing number of freeze–thaw cycles. The effects of freeze–thaw cycles on the direction and rate of crack propagation are revealed through a temperature–load coupled model, which provides an important reference for an in-depth understanding of the freeze–thaw failure mechanisms of fractured rock masses.

Damage evolution characteristics of siliceous slate with varying initial water content during freeze-thaw cycles

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Experimental study on multi-scale damage and deterioration mechanism of carbonaceous slate under freeze-thaw cycles

Experimental investigation on anisotropic characteristics of carbonaceous slate under uniaxial compression

Energy Dissipation and Damage Evolution during Dynamic Fracture of Muddy Siltstones Containing Initial Damage under the Freeze Thaw Effect

Damage mechanism of sandstones subject to cyclic freeze–thaw (FT) actions based on high-resolution computed tomography (CT)

A Comparison of Mechanical Properties and Failure Processes of Saturated and Unsaturated Slate from Sichuan-Tibet Plateau Area, China

Mechanical characteristics and damage evolution of granite under freeze–thaw cycles

Experimental and DEM simulations of the mechanical properties of rock under freeze–thaw cycles

Surface crack evolution patterns in freeze-thaw damage of fissured rock bodies

Swelling Damage Evolution of Argillaceous Slate in a Water-Rich Environment

Mechanical properties and acoustic emission characteristics of basalt fiber reinforced cemented silty sand subjected to freeze–thaw cycles

Pore structure expansion and evolution in sandstone with prefabricated crack under freeze-thaw cycles based on CT scanning

Analysis of Damage Characteristics for Skarn Subjected to Freeze-Thaw Cycles Based on Fractal Theory

Influence of initial stresses and stress paths on the deformation and failure mechanism of sandy slate

Effects of foliation on deformation and failure mechanism of silty slates

Study on Freezing-Thawing damage mechanism and evolution model of concrete

Evolution of Freeze–Thaw Damage Characteristics and Corresponding Models of Intact and Fractured Rocks Under Uniaxial Compression

Mechanical properties and failure mechanism of rock-like specimens with arc-shaped flaws under freeze–thaw cycles

Evolution characteristics of freeze–thaw-induced sandstone damage under water immersion conditions in Changdu, Tibet, China

Deformation characteristics of the shear band of silty clay–concrete interface under the influence of freeze–thaw