Abstract:Inedible natural oils are desired resources for renewable fuel and chemical production. Herein, a nonprecious metal cobalt catalytic system was developed for selectively hydrogenating fatty acids and natural oil into fatty alcohols or long chain alkanes. The cobalt-based catalysts were prepared by a wet-impregnation method with a series of supports including HZSM-5, CeO2, ZrO2, SiO2, Al2O3, TiO2, and hydroxyapatite (HAP) for hydrogenating stearic acid. Among these catalysts, Co/HAP exhibited the highest activity and 97.1% yield of 1-octadecanol was obtained at 190 degrees C and 4 MPa H-2 in water. Additionally, the Co/HAP was capable of directly hydrogenating the natural oil, Jatropha oil, to fatty alcohols without any preprocessing, and 83.1 wt % yield of alcohols could be achieved at 190 degrees C and 4 MPa H-2 in water. Co/HAP could also catalyze the complete conversion of stearic acid and Jatropha oil to long-chain alkanes when dodecane was used as solvent. X-ray power diffraction, transmission electron microscopy, H-2 temperature-programmed reduction, and NH3 temperature-programmed desorption were carried out, and the high catalytic activity of Co/HAP could be due to its desired acidity, cobalt particle dispersion, and stronger metal support interaction. The Fourier transform infrared results indicated that the high efficiency of Co/HAP could also be due to the absorption of fatty acid on the surface of catalyst which thus promoted the hydrogenation process over Co species. The possible reaction pathway was also proposed according to the conversion process tracking of stearic acid.

Direct hydrogenation of natural oils to fatty alcohols enabled by an alcoholysis/hydrogenation relay strategy and two-phase solvent system

Hydrothermal decarboxylation and hydrogenation of fatty acids over Pt/C.

Hydrodecarboxylation of fatty acids into liquid hydrocarbons over a commercial Ru/C catalyst under mild conditions

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Catalytic in Situ Hydrogenation of Fatty Acids into Fatty Alcohols over Cu-Based Catalysts with Methanol in Hydrothermal Media

Bifunctional CuNi/CoOx catalyst for mild-temperature in situ hydrodeoxygenation of fatty acids to alkanes using isopropanol as hydrogen source

Highly effective CoOx for catalytic transfer hydrogenation of plant oil to fatty alcohols

Direct Selective Hydrogenation of Fatty Acids and Jatropha Oil to Fatty Alcohols over Cobalt-Based Catalysts in Water

Transfer Hydrogenation of Fatty Acids on Cu/ZrO2: Demystifying the Role of Carrier Structure and Metal–Support Interface

A New Way for the Synthesis of Fatty Alcohols

Enhanced photocatalytic alkane production from fatty acid decarboxylation via inhibition of radical oligomerization

One-step hydrogenation-esterification of aldehyde and acid to ester over bifunctional Pt catalysts: A model reaction as novel route for catalytic upgrading of fast pyrolysis bio-oil

Catalytic transformations of acids, aldehydes, and phenols in bio-oil to alcohols and esters

Homogeneous Hydrogenation of Fatty Acid Methyl Esters and Natural Oils under Neat Conditions

Highly Selective Catalytic Conversion of Phenolic Bio‐Oil to Alkanes

NHC-Iridium-Catalyzed Deoxygenative Coupling of Primary Alcohols Producing Alkanes Directly: Synergistic Hydrogenation with Sodium Formate Generated in Situ

Condensation/Hydrogenation of Biomass-Derived Oxygenates in Water/Oil Emulsions Stabilized by Nanohybrid Catalysts

Facet-dependent Pd0-O2−-Ce3+ active site for selective hydrogenation of linoleate ester to cis oleic acid ester

Hydrothermal Hydrogenation/deoxygenation of Palmitic Acid to Alkanes over Ni/activated Carbon Catalyst

Catalytic hydrogenation saturation method for phenol-rich biological oil fractions

Catalytic Transfer Hydrogenation with Methanol over Pt/C Catalyst for Synergistic Hydrothermal Hydrogenation of Palmitic Acid