Abstract:Summary In an era of increasing energy demand, declining oil fields, and fluctuating crude oil prices globally, most oil companies are looking forward to implementing cost-effective and environmentally sustainable enhanced oil recovery (EOR) techniques such as low salinity waterflooding (LSWF) and microbial EOR (MEOR). The present study numerically investigates the combined influence of simultaneous LSWF and microbial flooding for in-situ MEOR in tertiary mode within a sandstone core under spatiotemporally varying pH and temperature conditions. The developed black oil model consists of five major coupled submodels: nonlinear heat transport model; ion transport coupled with multiple ion exchange (MIE) involving uncomplexed cations and anions; pH variation with salinity and temperature; coupled reactive transport of injected substrates, Pseudomonas putida and produced biosurfactants with microbial maximum specific growth rate varying with temperature, salinity, and pH; relative permeability and fractional flow curve variations owing to interfacial tension (IFT) reduction and wettability alteration (WA) by LSWF and biofilm deposition. The governing equations are solved using finite difference technique. Operator splitting and bisection methods are adopted to solve the MIE-transport model. The present model is found to be numerically stable and agree well with previously published experimental and analytical results. In the proposed MIE-transport mechanism, decreasing injection water (IW) salinity from 2.52 to 0.32 M causes enhanced Ca2+ desorption rendering rock surface toward more water-wet. Consequently, oil relative permeability (kro) increases with >55% reduction in water fractional flow (fw) at water saturation of 0.5 from the initial oil-wet condition. Further reducing IW salinity to 0.03 M causes Ca2+ adsorption shifting the surface wettability toward more oil-wet, thus increasing fw by 52%. Formation water (FW) salinity showed minor impact on WA with <5% decrease in fw when FW salinity is reduced from 3.15 to 1.05 M. During low-salinity augmented microbial flooding (LSAMF), biosurfactant production is enhanced by >63% on reducing IW salinity from 2.52 to 0.32 M with negligible increase on further reducing IW and FW salinities. This might be owing to limiting nonisothermal condition (40 to 55°C), dispersion, sorption, and microbial decay. During LSAMF, maximum biosurfactant production occurs at microbial maximum specific growth rate of 0.53 h-1, mean fluid velocity of 2.63×10-3 m h-1 and initial oil saturation of 0.6, thus resulting in significant WA, increase in kro by >20%, and corresponding fw reduction by >84%. Moreover, the EOR efficiency of LSAMF is marginally impacted even on increasing the minimum attainable IFT by two orders of magnitude from 10-3 to 10-1 mN m-1. Though pH increased from 8.0 to 8.9, it showed minor impact on microbial metabolism. Formation damage owing to bioplugging observed near injection point causing increase in fw by ~26% can be mitigated by adopting suitable well-stimulation strategies during the LSAMF run time. The present study is a novel attempt to show synergistic effect of LSAMF over LSWF in enhancing oil mobility and recovery at core scale by simultaneously addressing complex crude oil-brine-rock (COBR) chemistry and critical thermodynamic parameters that govern MEOR efficiency within a typical sandstone formation. The present model with relatively lower computational cost and running time improves the predictive capability to preselect potential field candidates for successful LSAMF implementation.

Numerical Modeling of Recovery of Moisture from the Unsaturated Zone: A Feasibility Study

An Easily Implemented Agro-Hydrological Procedure with Dynamic Root Simulation for Water Transfer in the Crop–soil System: Validation and Application

Variation of Soil Properties of Unsaturated Zone with Depth and Time at an Agricultural Site in Kuwait

Numerical Modeling and Analysis of Harvesting Atmospheric Water Using Porous Materials

Numerical Simulation and Experimental Validation of Moisture-Heat Coupling for Saturated Frozen Soils

Numerical simulation of a comparative study on heat extraction from Soultz-sous-Forêts geothermal field using supercritical carbon dioxide and water as a working fluid

Numerical simulation of bitumen recovery via supercritical water injection with in-situ upgrading

Characterization of Soil Moisture Distribution and Movement under the Influence of Watering-Dewatering Using AHFO and BOTDA Technologies

Retrieving Surface and Rootzone Soil Moisture Using Microwave Remote Sensing

Development, validation, and comparison of FE modeling and ANN model for mixed-mode solar drying of potato cylinders

Technical and Economic Feasibility of a Novel Heavy Oil Recovery Method: Geothermal Energy Assisted Heavy Oil Recovery

A non-Archie water saturation method for conventional reservoirs based on generalization of Passey TOC model for unconventional reservoirs

Numerical Investigation on Low-Salinity Augmented Microbial Flooding within a Sandstone Core for Enhanced Oil Recovery under Nonisothermal and pH Gradient Conditions

Mathematical model and its solution for water-altering-gas (WAG) injection process incorporating the effect of miscibility, gravity, viscous fingering and permeability heterogeneity

A Whole-Process Simulation for Energy Piles in Unsaturated Soils Considering the Coupled Heat and Moisture Transfer

Inverse Problem for the Moisture Transfer Equation: Development of a Method for Finding the Unknown Parameter and Proof of the Convergence of the Iterative Process

Reservoir recovery study with stability analysis model constructed by water-driven oil flat sand filling experiment: example of well area X in Tankou oilfield, China

Visual MODFLOW, solute transport modeling, and remote sensing techniques for adapting aquifer potentiality under reclamation and climate change impacts in coastal aquifer

Coupling Hydrus-1D and METRIC models to estimate soil water balance of a highly heterogeneous agricultural field

One-dimensional modelling of air injection into abandoned oil fields for heat generation

Modeling Soil Moisture and Flow Dynamics of Variably Saturated Heterogeneous Lateritic Porous Media under Wheat Crop