Abstract:Ammonia (NH 3 ) is widely served as fertilizer, safer chemical hydrogen storage, and energy conservation materials with an annual production around 200 million tons per year. Currently, NH 3 is mainly synthesized via the Haber-Bosch process, which is an extremely energy- and capital-intensive (high temperature 400–500 °C and high pressure 100–350 atm) process, consuming over 1% of the global annual energy output, emitting massive amount of greenhouse gases (~420 Mt CO 2 annually), and causing serious concerns with climate change. Electrochemical nitrogen reduction reaction (eNRR) allows NH 3 production from nitrogen (N 2 ) and water (H 2 O) under ambient conditions. Especially if driven by renewable energies, NRR represents a potentially clean and sustainable strategy for replacing the traditional Haber-Bosch process and alleviating climate change effect. One of the most critical fundamental challenges in production of ammonia via electrochemical nitrogen reduction reaction (eNNR) is developing catalysts which are capable to boost eNRR activity and concurrently suppress the overwhelming competitive hydrogen evolution reaction (HER). This work reports a new strategy to develop such catalysts to alleviate this challenge. This new strategy for the first time takes advantage of the outstanding capability of some redox active transition metal oxides (TMOs) in their super capability in electrochemically controlled proton interstitial doping and the associated remarkable structural changes to boost their NRR activity. Further, inspired by their unique hydrogen intercalation determined HER activity, this new strategy introduced cationic substitutional doping of the TMOs with nonmetal elements, such as phosphorus (P), to modulate their proton intercalation behavior, achieving HER suppression. In this work, tungsten oxide nanosheets (WO 3 ) have been exploited as a typical example of such TMOs to demonstrate the feasibility of this innovative strategy. It is found that cationic P doping also accompanies introduction of large quantity of oxygen vacancies (OVs) in the matrix of the WO 3 and structural changes of the WO 3 lattice. The synergy of the substitutional doping and interstitial doping in tuning the electronic and the local geometric structures leads to significantly enhanced eNNR performance of WO 3 nanosheets. An unprecedented high Faradaic efficiency (FE) of 64.1% with NH3 yield of 24.5 μg h -1 has been reached, representing the highest NRR performance for WO 3 based catalysts. It is worth mentioning that the P-doped WO3 catalyst (200 nm square with a thickness of 20-40 nm) is much larger than most of the reported catalyst. The catalytic yield is even higher than that achieved with atomic thin two-dimensional (2D) WO 3 nanosheets (OV-rich) catalysts (17 μg h -1 with a FE of 7.0%), which is known for their high catalytic efficiency due to the excellent accessibility of all the catalytic active sites. It is also worthwhile to mention that the FE of 64.1% is comparable to that of the natural nitrogenase can be reached (65%), which is unprecedented high compared to most of catalysts reported so far (<25%). In addition, inclusion of Li ions in the electrolyte further increased the NH 3 yield to 60.1 μg h -1 with the high FE largely remained, reached the highest eNNR performance for all the TMO based catalysts. Density functional theory calculations further revealed the synergistic role of interstitial doping of H* and substitutional cationic doping of P, and the associated generation of OVs in increasing the electronic states crossing the Fermi level of the WO 3 and thus reducing reaction energy barrier in N 2 activation and hydrogenation. An interesting non-PCET (proton coupled electron transfer) mechanism is revealed in the first step and the rate determining step during eNNR, providing a new design principle for TMO-based catalysts. Figure 1

La doped-Fe2(MoO4)3 with the synergistic effect between Fe2+/Fe3+ cycling and oxygen vacancies enhances the electrocatalytic synthesizing NH3

Increasing Mo5+ in M-doped La2(MoO4)3 (M = Fe, Co, Ni, Cu, and Zn) toward efficient electrocatalytic nitrogen fixation

Fe2Mo3O8/XC-72 electrocatalyst for enhanced electrocatalytic nitrogen reduction reaction under ambient conditions

Coral-like Fe-doped MoO2/C heterostructure with rich oxygen vacancies for efficient electrocatalytic N2 reduction

Impurity Tuning for Enhanced Electrocatalytic Reduction of N2 to NH3 Over Fe/Co Co-doped MoS2 Nanosheets

Efficient Electrocatalytic Properties of Transition Metal (mn, Co, Cu) Doped LaFeO3 for Ammonia Synthesis Via Nitrate Reduction

Modulating Lewis acidic active sites of Fe doped Bi 2 MoO 6 nanosheets for enhanced electrochemical nitrogen fixation

Sulfurization enhancement of FeMoO<sub>4</sub> for electrochemical ammonia synthesis with high Faradaic efficiency in neutral media

Simultaneous Boosting Nitrogen Reduction Activity and Suppressing Hydrogen Evolution Reaction Activity of Transition Metal Oxide Based Electrocatalyst

Tuning the performance of nitrogen reduction reaction by balancing the reactivity of N2 and the desorption of NH3

FeMo-N nanosheet arrays supported on nickel foam for efficient electrocatalytic reduction of N2 to NH3 at ambient condition

Surface Valence State Effect of MoO 2+ x on Electrochemical Nitrogen Reduction

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

Coupling Fe and Mo single atoms on hierarchical N-doped carbon nanotubes enhances electrochemical nitrogen reduction reaction performance

A simple hydrothermal synthesis of oxygen vacancy-rich MnMoO4 rod-like materials and its highly efficient electrocatalytic nitrogen reduction

Improving Electrocatalytic Nitrogen Reduction Selectivity and Yield by Suppressing Hydrogen Evolution Reaction via Electronic Metal–Support Interaction

Porous LaFeO3 nanofiber with oxygen vacancies as an efficient electrocatalyst for N2 conversion to NH3 under ambient conditions

Recent Advances in Fe, Mo Based Electrocatalysts for Nitrogen Reduction Under Ambient Conditions

Enhanced electrochemical reduction of N2 to NH3 by interfacial engineering of biomass-derived Fe, Mo-bimetallic composite

Periodic Adjacent Pd‐Fe Pair Sites for Enhanced Nitrate Electroreduction to Ammonia via Accelerating Proton Relay

Modulating Oxygen Vacancies of TiO2 Nanospheres by Mn-Doping to Boost Electrocatalytic N2 Reduction