Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Thermoplastic starch (TPS) suffers from its intrinsic low mechanical strength and high brittleness due to its strong hydrogen bonding and low chain mobility. The conventional way to crosslink the TPS film can improve the strength and stiffness of the films, but usually reduces the flexibility of the film, and increases its brittleness. In this study, the incorporation of the hybrid nanofiller [1 wt% nanocellulose (C) and 4 wt% nano bentonite (B)] into the TPS proved to improve greatly the films' strength and flexibility. The hybrid nanofillers with ratio 4B:1C was incorporated into the crosslinked thermoplastic corn starch (CR-TPCS) film to increase the its flexibility and toughness and produced a high mechanical strength fully biodegradable film. Two different aqueous carboxylic acids: citric acid (CA) and tartaric acid (TA) with different pH values (2,4,6) as the green crosslinker were employed. Substantial increase of tensile strength (3.98 to 9.17 MPa), Young's modulus (9.10 to 46.30 MPa) and elongation at break (55.2 to 135.7%) was observed for the CA- 4B1C/pH2 films compared to the CR-TPCS films. The melting temperature (Tm) of the CA-4B1C/pH2 improved compared to the TPCS/4B1C (un-crosslinked) film due to its crosslinking effect. Meanwhile, the CA-4B1C films exhibited the highest degree of substitution and di-esterification with the lowest swelling and water solubility properties due to the formation of a special "bridge" structure between the CA, nanocellulose and plasticizer. The "bridge" structure developed between the TPCS chains serves as the toughener to motivate higher chain stress relaxation and load endurance. The crosslinked "bridge structure" also proved to effectively reduce the retrogradation phenomenal in the TPCS films. This combination method of hybridization and crosslinking is an efficient, low cost, and environmentally friendly technique to overcome the low flexibility and brittleness problem of the TPS based packaging film.

Advancing sustainable bioplastics: chemical and physical modification of starch films for enhanced thermal and barrier properties

Studies on Influence of Chemical Modification, Plasticizer and Starch Concentration on Some Characteristics of Biodegradable Film

Influence of Starch Composition and Molecular Weight on Physicochemical Properties of Biodegradable Films

Upcycling of post-industrial starch-based thermoplastics and their talc-filled sustainable biocomposites for single-use plastic alternative

Improving Resin and Film Forming Properties of Native Starches by Chemical and Physical Modification

Preparation and physicochemical characterization of starch/pectin and chitosan blend bioplastic films as future food packaging materials

Thermoplastic starch hybrid biocomposite films with improved strength and flexibility produced through crosslinking via carboxylic acid

Eco-friendly synthesis of biodegradable and high strength ternary blend films of PVA/starch/pectin: Mechanical, thermal and biodegradation studies

Functionality and Applicability of Starch-Based Films: An Eco-Friendly Approach

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

Radiation modification and characterization of polyvinyl alcohol/starch/citric acid/glycerol bioblend film

Thermoplastic starch blown films with improved mechanical and barrier properties

Thermoplastic starch (TPS)-based composite films for wastewater treatment: synthesis and fundamental characterization

Toward a Circular Bioeconomy: Exploring Pineapple Stem Starch Film as Protective Coating for Fruits and Vegetables

Influence of Choline Chloride/Urea and Glycerol Plasticizers on the Mechanical Properties of Thermoplastic Starch Plastics

In situ reactive compatibilization of polylactic acid (PLA) and thermoplastic starch (TPS) blends; synthesis and evaluation of extrusion blown films thereof

Influence of Plasticizers Concentration on Thermal, Mechanical, and Physicochemical Properties on Starch Films

Enhanced Mechanical and Long-Lasting Antibacterial Properties of Starch/pbat Blown Films Via Designing of Reactive Micro-Crosslinked Starch

Effect of cold plasma treatment and plasma‐activated water on physicochemical and structural properties of starch: A green and novel approach for environmental sustainability

Chemical and physical modifications of starch for renewable polymeric materials

Edible and Biodegradable Starch Films: A Review