Effect of Dietary Cholesterol on the Metabolic Rate of Hyperthyroid Rats.∗

L. E. Winebrenner,W. Marx

DOI: https://doi.org/10.3181/00379727-71-17180

1949-06-01

Abstract:Summary Dietary cholesterol significantly decreased the oxygen consumption of thyroid-fed rats, but the reduction was not sufficient for the metabolic rate to approach normal levels. This effect of cholesterol cannot be attributed to a depression of the food intake.

What problem does this paper attempt to address?

[Disseminated intravascular coagulation and ruptured aneurysm of the abdominal aorta].

J. Jausseran,P. Bergeron,M. Reggi,P. Varlet,M. Formichi,R. Courbier

1982-11-01

Annales de Chirurgie

Abstract:
Effect of extraction pH and post-extraction heat treatment on the composition and interfacial properties of peanut oil bodies

Fusheng Sun,Qian Wang,Chao Gao,Hong Xiao,Nan Yang

DOI: https://doi.org/10.1016/j.colsurfa.2022.130351

2022-10-22

Abstract:Oil bodies (OBs) are composed of internal triglyceride and external phospholipids with embedded surface proteins. The phospholipids and surface proteins not only play an important role in the stability of the natural OB droplets, but also endow emulsifying property of OBs, as they can participate in the emulsification process of a formula. In order to investigate the effects of extraction pH and post heat treatment on the interfacial properties of OBs, the interfacial composition and structure of peanut OBs extracted at different pHs, and heat treated at 30 °C, 60 °C, 90 °C after extracted at pH 7.5 were characterized, and their interfacial adsorption kinetics, interfacial isothermal curve, and viscoelasticity were studied using dilatational rheology and Langmuir-Blodgett (LB) film analyzer. The results showed that the content of peanut OBs surface proteins decreased with the increasing of extraction pH and heat treatment temperature. The particle size of peanut OBs extracted at pH 7.5 was the smallest and the surface hydrophobicity of these OBs heated at 30 °C was the highest, which resulted in their fastest increase of interfacial pressure and strongest viscoelasticity of the absorbed interfacial film at the oil-water interface. The peanut OBs extracted at different pH and heat-treatment demonstrated diffusion, adsorption and rupture/structural rearrangement at the air-water interface as time went on according to the interfacial compression isotherm curve, which are correlated with their interfacial dilatational rheology behaviors and emulsification ability. These findings provide a reference for the future utilization of peanut OBs as emulsifiers in the food and cosmetic industries.

chemistry, physical
A Novel Strategy for the Demulsification of Peanut Oil Body by Caproic Acid

Yuhang Gao,Yanzhao Zheng,Fei Yao,Fusheng Chen

DOI: https://doi.org/10.3390/foods12163029

IF: 5.2

2023-08-13

Foods

Abstract:The aqueous enzymatic method is a form of green oil extraction technology with limited industrial application, owing to the need for the demulsification of the oil body intermediate product. Existing demulsification methods have problems, including low demulsification rates and high costs, such that new methods are needed. The free fatty acids produced by lipid hydrolysis can affect the stability of peanut oil body (POB) at a certain concentration. After screening even-carbon fatty acids with carbon chain lengths below ten, caproic acid was selected for the demulsification of POB using response surface methodology and a Box–Behnken design. Under the optimal conditions (caproic acid concentration, 0.22%; solid-to-liquid ratio, 1:4.7 (w/v); time, 61 min; and temperature, 79 °C), a demulsification rate of 97.87% was achieved. Caproic acid not only adjusted the reaction system pH to cause the aggregation of the POB interfacial proteins, but also decreased the interfacial tension and viscoelasticity of the interfacial film with an increasing caproic acid concentration to realize POB demulsification. Compared to pressed oil and soxhlet-extracted oil, the acid value and peroxide value of the caproic acid demulsified oil were increased, while the unsaturated fatty acid content and oxidation induction time were decreased. However, the tocopherol and tocotrienol contents were higher than those of the soxhlet-extracted oil. This study provides a new method for the demulsification of POB.

food science & technology
Demulsification law of polyether demulsifier for W/O crude oil emulsion containing hydrophobically modified polyacrylamide in water

Jian Zhang,Xiujun Wang,Qiang Liang,Ming Duan,Shenwen Fang,Chunsheng Zhang,Jiaqing Chen

DOI: https://doi.org/10.1016/j.molliq.2023.123805

IF: 6

2023-12-21

Journal of Molecular Liquids

Abstract:Hydrophobically modified polyacrylamide (HMPAM) is one of the commonly used polymers for polymer flooding. Because it is water soluble, there are many reports on the impact of HMPAM on the stability and treatment of produced water (it is O/W emulsion), but few reports on its influence on the demulsification of W/O crude oil emulsion. In this paper, firstly, three types of HMPAM containing cationic, anionic, and nonionic hydrophobic monomers (abbreviated as P(AM-AANa-N)Cn, P(AM-AANA-S)Cn, and P(AM-AANA-O)Cn, respectively) were synthesized; Then, demulsification experiments and interface behavior experiments (including dynamic interfacial tension, dilatational rheology and dynamic coalescence time measurement) were conducted to investigate the influence of HMPAM on the demulsification performance of a W/O heavy oil emulsion demulsifier D1. The demulsification results showed that HMPAM reduced the dehydration speed of D1, the type of hydrophobic monomer and the length of hydrophobic chain in HMPAM can affect the final water separated of D1. P(AM-AANa-S)Cn, P(AM-AANa-N)Cn with long hydrophobic chain, and P(AM-AANa-O)Cn with short hydrophobic chains had the negative effect on performance of D1. The results of dynamic interfacial tension experiments indirectly showed that HMPAM had the influence on the D1′s conformation and speed of rearrangement at the W/O interface during the water droplet coalescence process, thereby affecting the reduction of elastic modulus ( G′ ) of W/O interface and the coalescence rate of water droplets. When there was HMPAM in water, the coalescence time of water droplets increased, resulting in the decrease of dehydration rate. At the meantime, HMPAM had an impact on the lg(G1′/Gdemulsifier′)/lgG1′ , thereby affecting the final water separated of D1.

chemistry, physical,physics, atomic, molecular & chemical
Demulsification of water-in-heavy oil emulsions by oxygen-enriched non-ionic demulsifier: Synthesis, characterization and mechanisms

Xincheng Zhang,Changqing He,Jingjing Zhou,Ying Tian,Lin He,Hong Sui,Xingang Li

DOI: https://doi.org/10.1016/j.fuel.2022.127274

IF: 7.4

2022-12-31

Fuel

Abstract:Separation of water-in-heavy oil (W/HO) emulsions is a critical issue in petroleum industry (especially for the thickened oils and natural bitumen) due to its high viscosity and rigid interfacial film formed by natural stabilizers (e.g., asphaltenes). Herein, two different strategies have been proposed to enhance the demulsification of the W/HO emulsions from the aspects of interfacial reconstruction and bulk oil phase property regulation. Firstly, to break the rigid interfacial film at the oil–water interface, a novel demulsifier (TJU-3, M n : 6131 g/mol) has been successfully designed, introducing high content of carboxyl groups and ester groups to the molecules. The chemical groups, molecular structure, content of oxygen-containing groups, solubility, turbidity and phase distribution rules of TJU-3 have been instrumentally determined. It was observed that TJU-3 performed well in breaking the W/HO emulsions with faster rate (reaching 100% dehydration in less 25 min) and no "tailing phenomenon" compared with other commercial demulsifiers. Secondly, to facilitate the diffusion of demulsifer molecules from bulk oil phase to oil–water interface which promote the demulsification rate, the effect of oil viscosity on the demulsification efficiency has been investigated. Results showed that, after working with demulsifiers, when only one single method (heating or dilution at ambient conditions) was used, the dehydration rate of W/HO emulsions is limited (no more than 50%). When combining demulsifiers with diluents at slight heating conditions, a complete dehydration (∼100%) of W/HO emulsions was obtained, which was optimized at 60 °C, 400 ppm. This synergistic effect was mainly contributed to the fact that viscosity reduction weakens the obstruction of the demulsifier diffusion and increases the average kinetic energy of the thermal movement of demulsifiers. This work would provide insights for developing new low-carbon demulsification separation method for petroleum production.

energy & fuels,engineering, chemical
Peanut de-oiling at room temperature by micro-aqueous hydration: Co-destabilization driven by oleosome coalescence and protein aggregation

Juncai Tu,Shenghai Liu,Weidong Bai,Charles Brennan,Beiwei Zhu

DOI: https://doi.org/10.1016/j.ijbiomac.2024.136366

2024-10-06

Abstract:The peanut de-oiling industry currently lacks efficient processing technologies for de-oiling at low or room temperatures. A novel method, micro-aqueous extraction (MAE), offers over 93 % de-oiling efficiency at room temperature and is also effective for other oilseeds like sesame, camellia, and rapeseed. Despite its effectiveness, the exact mechanism behind oleosomes destabilization at a critical hydration level or oil volume fraction (φ ∼ 0.75) is not fully understood. This study investigates how MAE affects peanut oleosome size, paste stability, and the interfacial properties of surfactant proteins. Results showed that micro-aqueous hydration and agitation caused small droplets (85.6 vol% < 10 μm) to coalesce into larger droplets (90.0 vol% > 30 μm) due to press-induced rupture of the liquid film. Simultaneously, agitation decreased water mobility and protein intrinsic fluorescence, while increasing paste viscosity, leading to protein aggregation. This aggregation further promoted oleosome coalescence. Additionally, hydration and agitation weakened the ability of membrane proteins to stabilize oleosomes by increasing interfacial tension and decreasing dilatational storage modulus. The insights into the peanut oleosome destabilization mechanism for MAE provide a foundation for scaling up the process, with the potential to replace current hot and cold pressing techniques.
Structural Study on Emulsion Formed during Enzyme-Assisted Aqueous Extraction from Soybean Oil

Limin WANG,Wenjun MA,Hongbo SUN,Chongrong XUN,Li ZHANG,Lianzhou JIANG,Xiaonan SUI,Yang LI

DOI: https://doi.org/10.7506/spkx1002-6630-201812011

2018-01-01

Abstract:In this study, the emulsion formed during enzyme-assisted aqueous extraction of soybean oil was investigated at different hydrolysis times (1, 2, and 3 h) and enzyme dosages (1% and 2%). The mechanism of action of oil droplets in the emulsion was elucidated to explore the structural features and intermolecular interactions. The degree of hydrolysis (DH), microscopic observation, zeta-potential, fluorescence spectroscopy, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) profiles were determined. The results showed that the DH of the emulsion was about 7%. As a result, the protein in the emulsion was broken down into small peptides, resulting in reduced affinity between oil and protein, droplet aggregation and decreased absolute value of zeta potential. Large protein aggregates linked by disulfide bonds appeared on the SDS-PAGE. In addition, the fluorescence intensity of the emulsion was obviously weakened as compared to soybean protein isolate (SPI) under the same hydrolysis conditions, which may be attributed to the presence of phospholipids, the interaction between tryptophan residue and oil and the disulfide-linked aggregates.
Hydrogen bond recombination regulated by strongly electronegative functional groups in demulsifiers for efficient separation of oil–water emulsions

Yuxuan Tian,Yaming Qi,Sijia Chen,Zhihua Qiao,Hongjing Han,Zherui Chen,Haiying Wang,Yanan Zhang,Huiying Chen,Leilei Wang,Xuzhong Gong,Yanguang Chen

DOI: https://doi.org/10.1016/j.jhazmat.2023.132525

IF: 13.6

2023-09-16

Journal of Hazardous Materials

Abstract:Tight oil extraction and offshore oil spills generate large amounts of oil–water emulsions, causing serious soil and marine pollution. In such oil–water emulsions, the resin molecules are bound by π–π stacking and bind to interfacial water molecules via hydrogen bonds , which impede the aggregation between water droplets and thereby the separation of the emulsion. In this study, strongly electronegative oxygen atoms (in ethylene oxide , propylene oxide, esters, and hydroxyl groups) were introduced through poly(propylene glycol)-block-polyether and esterification with acrylic acid to attract negative charges in order to form electron-rich regions and enhance interfacial hydrogen bond recombination. The potential distribution in the demulsifier molecules and their space occupancy were regulated by the polymerization reaction to destroy the π–π stacking interaction between resin molecules. The results show that the binding energies (binding free energy and hydrogen bonding energy) of oxygen-containing demulsifier molecules with water molecules were higher than those of resin molecules with water molecules, resulting in the fission of the hydrogen bonds between resin and water molecules. The introduction of demulsifier molecules that occupied large interfacial space reduced the binding energy between resin molecules from −2176.06 to −110.00 kJ·mol −1 . Noteworthy, the binding energy between demulsifier molecules and resin molecules was −1076.36 kJ·mol −1 lower than that between resin molecules (−110.00 kJ·mol −1 ), indicating the adsorption of the surrounding interfacial resin molecules by the demulsifier molecules and destruction of the π–π stacking between them, thus favoring the collapse of the interfacial structure of the oil–water emulsion and achieving its separation. This study provides important theoretical support for the treatment of oil-contaminated soil and offshore oil spill pollution.

environmental sciences,engineering, environmental
Aqueous Enzymatic Extraction and Demulsification of Camellia Seed Oil (camellia Oleifera Abel.) and the Oil's Physicochemical Properties

Xuezhi Fang,Xueqian Fei,Hong Sun,Yongfeng Jin

DOI: https://doi.org/10.1002/ejlt.201400582

2016-01-01

European Journal of Lipid Science and Technology

Abstract:An aqueous enzymatic extraction method was developed to extract oil from camellia seed (Camellia oleifera Abel.). Individual enzymes and combinations of enzymes, pH, the ratio of material to water, reaction time and methods of demulsification were studied. The effects of hexane and aqueous enzymatic extraction on the oil's physicochemical properties (acid value, peroxide value, fatty acid profile, phenolics, and phospholipids content) were compared. The combination of protease/cellulase yielded significantly more oil than did other combinations. Under the optimal reaction conditions, a free oil yield of 82.37% was obtained. Four types of demulsification methods were compared. After demulsification with 20% ethanol (v/v), the highest total free oil yield of 91.38% was achieved. Compared with hexane‐extracted oil, aqueous enzymatic‐extracted oil was more acidic; had a higher percentage of monounsaturated fatty acid and contents of vitamin E and squalene; and had lower peroxide values, percentage of total saturated fatty acid, polyunsaturated acid, and content of both total phenolics and total phospholipids.Practical applications: The current work will contribute to an efficient enzymatic extraction method for camellia seed oil and help with the develop a method to demulsify the emulsion.An aqueous enzymatic extraction method was developed to extract oil from camellia seed (Camellia oleifera Abel.). Individual enzymes and combinations of enzymes, pH, the ratio of material to water, reaction time and methods of demulsification were studied. The effects of hexane and aqueous enzymatic extraction on the oil's physicochemical properties (acid value, peroxide value, fatty acid profile, phenolics, and phospholipids content) were compared. The combination of protease/cellulase yielded significantly more oil than did other combinations. Under the optimal reaction conditions, a free oil yield of 82.37% was obtained. Four types of demulsification methods were compared. After demulsification with 20% ethanol (v/v), the highest total free oil yield of 91.38% was achieved. Compared with hexane‐extracted oil, aqueous enzymatic‐extracted oil was more acidic; had a higher percentage of monounsaturated fatty acid and contents of vitamin E and squalene; and had lower peroxide values, percentage of total saturated fatty acid, polyunsaturated acid, and content of both total phenolics and total phospholipids.
Hyperbranched Poly(amido Amine) As an Effective Demulsifier for Oil-in-water Emulsions of Microdroplets

Lifeng Zhang,Hao Ying,Shu Yan,Ningning Zhan,Yongsheng Guo,Wenjun Fang

DOI: https://doi.org/10.1016/j.fuel.2017.09.066

IF: 7.4

2017-01-01

Fuel

Abstract:The destabilization of oil-in-water (O/W) emulsions with average oil droplet sizes of less than 2 mu m is important. Herein, hyperbranched poly(amido amine) (h-PAMAM) is successfully designed and synthesized by controlling the ratio of methyl acrylate (MA) to ethylenediamine (EDA) to enable the demulsifier to break microdroplets. The investigations on the effects of dosage, temperature, and settling time reveal that the demulsifier h-PAMAM with many -NH2 terminal functional groups displays a satisfactory demulsification performance. The oil removal ratio can reach 91% within 30 min at the demulsification equilibrium with the addition of h-PAMAM. This ability is primarily ascribed to the hyperbranched topology and abundant amino groups of h-PAMAM. Furthermore, measurements of the rupture rate constants of oil droplets and interfacial tension indicate that h-PAMAM is an excellent demulsifier. Dynamic light scattering (DLS) analysis can provide a new evidence for the exploration of the demulsification mechanism. The effective demulsification performance of h-PAMAM supports its potential applications in petroleum engineering.
Effective biodemulsifier components secreted by Bacillus mojavensis XH-1 and analysis of the demulsification process

Ning Hou,Dapeng Li,Fang Ma,Jie Zhang,Yang Xu,Jinna Wang,Chunyan Li

DOI: https://doi.org/10.1007/s10532-013-9679-5

Biodegradation

Abstract:The purpose of the present study was to investigate the effective components of the demulsifying bacterial strain Bacillus mojavensis XH-1 and its demulsification process. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and the shotgun LC-MS/MS method were used to separate and identify proteins with efficient demulsification activity. The zeta potential changes of the emulsion before and after addition of the biodemulsifier were tested, and the relationships between oil-in-water interfacial tension, the demulsification efficiency and the biodemulsifier structure were examined. The study results indicate that the effective biodemulsifier components were extracellular proteins attached to the cells or secreted into the culture solution that presented as a 50-80 kDa band observed by SDS-PAGE. Six of the proteins were unknown or unnamed, and the demulsifying functions of another 14 proteins had not been previously reported. The main demulsification mechanisms were determined to be solubilization and replacement. When the concentration of the biodemulsifier was low, the replacement mechanism dominated, and the demulsification ratio increased with the biodemulsifier concentration. Solubilization dominated when a high concentration of biodemulsifier was provided, and the demulsification ratio decreased as the biodemulsifier concentration increased.
Analysis of Biological Demulsification Process of Water-in-oil Emulsion by Alcaligenes Sp. S-XJ-1.

Yue Wen,Hang Cheng,Li-Jun Lu,Jia Liu,Yi Feng,Wei Guan,Qi Zhou,Xiang-Feng Huang

DOI: https://doi.org/10.1016/j.biortech.2010.05.088

IF: 11.4

2010-01-01

Bioresource Technology

Abstract:A demulsifying strain (S-XJ-1) was isolated from petroleum-polluted soil and identified as Alcaligenes sp. It showed emulsion breaking ratio of 81.3% for W/O emulsion within 24h when the cell concentration was 500mg/L. Evolution of water droplets during the biological demulsification process was investigated using a Turbiscan stability analyzer and microphotography. Further investigation focused on cell surface hydrophobicity and oil–water interfacial properties. The biological demulsification process began with rapid dispersal of the cells into the oil phase and adsorption onto the oil–water interface. This occurred due to high cell surface hydrophobicity and the presence of amphiphilic compounds in the cell walls. The cells had higher interfacial activity than the emulsifier molecules, and they displaced some of the emulsifier molecules, which effectively reduced the interfacial tension gradient. As a result, the interfacial film strength decreased, the water droplets coalesced and eventually phase separation occurred.
The Effect of Hydrophobic Modified Block Copolymers on Water–Oil Interfacial Properties and the Demulsification of Crude Oil Emulsions

Juan Zhang,Ping Liu,Yuan Gao,Qingping Yu

DOI: https://doi.org/10.3390/polym16172392

IF: 5

2024-08-25

Polymers

Abstract:The demulsification effect of three types of block copolymers, BP123, BPF123, and H123, with the same PEO and PPO segments but different hydrophobic modification groups on crude oil emulsions and the properties of oil–water interfaces were investigated using demulsification experiments, an interfacial tensiometer, and surface viscoelastic and zeta potential instruments in this paper. The results showed that the hydrophobic modification group of the block copolymers had great effects on the demulsification performance. The H123 block copolymers with the strongest hydrophobicity had the best demulsification effect on the crude oil emulsions. The properties of the oil–water interfaces indicated that the modified block copolymers achieved the demulsification of crude oil emulsions by reducing the strength of the oil–water interfacial film and the interfacial tension.

polymer science
Effect of polyacid on crude oil emulsifying properties of amphiphilic polymer supramolecular system

Xiangfeng Zhang,Bauyrzhan Sarsenbekuly,Hongbin Yang,Lushan Wang,Yanbin Cao,Peng Xu,Shubin Shi,Peizhong Tang,Xue Wei,Wanli Kang

DOI: https://doi.org/10.1016/j.molliq.2022.120998

IF: 6

2022-12-16

Journal of Molecular Liquids

Abstract:Amphiphilic polymers can emulsify with crude oil to form and stabilize oil in water emulsion due to existence of hydrophobic groups, so as to improve the dispersion effect of crude oil. Supramolecular system is constructed by electrostatic interaction between amphiphilic polymer and polybasic acid, which may affect the interaction between hydrophobic groups and crude oil. Whether stable emulsion can be formed, and effect of polybasic acid structure on the stability of crude oil emulsion needs to be further studied. The effect of polybasic acid on the stability of the emulsion was studied by bottle test and stability analyzer. Furthermore, particle size analysis, interfacial tension analysis, interfacial rheological analysis, dynamic rheological characteristics analysis and visual rheology test were used to study the emulsification law of supramolecular crude oil and the action mechanism of stable emulsion. The results show that emulsion stability of different amphiphilic polymer supramolecular systems is mainly affected by interfacial tension, external phase structure strength and droplet migration rate. The higher the external phase viscosity, the smaller the interfacial tension and droplet size, the more conducive to the stability of the emulsion. From high to low, the order of stability of supramolecular system emulsion with different polybasic acids is citric acid > heptanedioic acid > disodium ethylenediamine tetraacetate > sodium polyacrylate. After the supramolecular system is constructed by electrostatic interaction between amphiphilic polymer and polyacid, the system has considerable crude oil dispersion characteristics and oil in water emulsion was easily formed, which laid a foundation for its application in enhanced oil recovery.

chemistry, physical,physics, atomic, molecular & chemical
Methacrylated Hyperbranched Polyglycerol As a High-Efficiency Demulsifier for Oil-in-Water Emulsions

Lifeng Zhang,Guijin He,Dengfeng Ye,Ningning Zhan,Yongsheng Guo,Wenjun Fang

DOI: https://doi.org/10.1021/acs.energyfuels.6b01631

IF: 4.6541

2016-01-01

Energy & Fuels

Abstract:To break oil-in-water emulsions with an average oil droplet size of <2 mu m, a series of hyperbranched polyglycerol (HPG)-based demulsifiers methacrylated hyperbranched polyglycerol (HPG-MA) are synthesized successfully by controlling the ratio of HPG to glycidyl methacrylate (GMA). Dosage, temperature, settling time, and salinity are taken into account to evaluate the performance of these demulsifiers, respectively. The oil removal ratio with the addition of HPG-MA demulsifier can exceed 86% within 40 min to reach the equilibrium of demulsification, in comparison with 90 min for previously reported demulsifiers. Because of the specific branched structure, the demulsifier can multipointly adhere to the oil/water interface, and then shorten the time of adsorption and increase the rupture rate of oil droplets. The oil water interfacial tensions with the demulsifier in the water phase are further measured to help comprehend the demulsification mechanism. The change of oil droplet size against time, which reflects flocculation and coalescence of oil droplets, is vividly monitored during the process of demulsification. The demulsification performance indicates that the novel HPG-MA demulsifier displays great promise in the petroleum industry.
Investigation of the stability of microemulsion in extraction organic phase of saponated P507

Xing-Hai Shen,Gailing Li,Hongcheng Gao

1997-01-01

Abstract:The activation energy Delta E can indicate the strength of the interfacial membranes of microemulsion particles, so it could be used to discribe and discuss the stability of the formed microemulsion in extraction organic phase. Variations of activation energies with water content for microemulsions formed in the organic phase of saponated P507 (2-ethylhexylphosphonic acid mono-2-ethylhexyl ester)-alcohol (n-propanol, n-butanol, n-pentanol and n-hexanol)-heptane-water were determined by measurement of electric conductivity. The curves between Delta E and water content V-H2O were given. It is found that Delta E of butanol system decreases slightly with the increase of water content, while that of pentanol and hexanol systems presents a maximum. It is also found that the activation energy increases with the increase of the length of alcohol chain. These results reveal that the longer the length of alcohol chain, the bigger the strength of the interfacial membranes of particles, and the more stable the microemulsion is. Based on the above results, hexanol or octanol was always used as co-surfactant in extraction process.
Investigation on the Emulsification Mechanism in Aqueous Enzymatic Extraction of Edible Oil from Schizochytrium sp.

Xu Zheng,Juan Ma,Xiaohong Kou,Xin Gao,Jing Liu,Shihao Li,Bowen Zheng,Yazhou Liu,Zhaohui Xue

DOI: https://doi.org/10.1002/jsfa.12471

IF: 4.1

2023-01-26

Journal of the Science of Food and Agriculture

Abstract:BACKGROUND The interaction between emulsified substances and lipids generates an emulsification system during the extraction of microalgae edible oil by aqueous enzymatic method. This study aimed to resolve the dynamics of interfacial protein adsorption during the extraction of microalgae oil at different enzymatic times and the effect on the stability of the interfacial membrane formed by the proteins based on interfacial effects. RESULTS At 1.5 h of enzymatic hydrolysis, the molecular weights of the proteins/peptides were all below 35 kD. In addition, the protein‐peptide structure was loose, with the lowest number of disulfide bonds, peak surface hydrophobicity, the highest number of residues, and disordered lipid acyl arrangement. At the same time, the physical stability of the emulsion was the lowest, and the interfacial membrane rupture was distinct. On excessive enzymatic hydrolysis (at 3.0 h), a more uniform interfacial membrane was re‐formed on the lipid surface. CONCLUSION Protein is the main emulsifying substance in the emulsification system. The addition of protease affects the stability of the interfacial membrane formed by proteins. In addition, sufficient enzymatic hydrolysis (1.5 h) inhibited emulsification, while excessive enzymatic hydrolysis (3.0 h) promoted emulsification. This article is protected by copyright. All rights reserved.

food science & technology,chemistry, applied,agriculture, multidisciplinary
Hyperbranched Polyethyleneimine for High-Effective Oil-Water Separation

Haibin Yu,Lifeng Zhang,Ningning Zhan,Houkai Teng,Lishan Zhou,Jin Zhao,Wenjun Fang

DOI: https://doi.org/10.1016/j.petrol.2022.110403

IF: 5.168

2022-01-01

Journal of Petroleum Science and Engineering

Abstract:A series of hyperbranched polyethyleneimine (h-PEI) functioned with terminal amine groups is synthesized to remove oil from O/W emulsion. The demulsifier dehydration rate of h-PEI is systematically evaluated with the subsidiary facilities of DLS analysis, digital tensiometer and UV-vis spectrophotometer. The results indicate that h-PEI demulsifier displays satisfactory demulsification (the oil removal rate > 90%) with small dosage (< 80 mg L-1) and short settling time (< 30 min). The relatively short equilibrium time and great demulsification are ascribed to the amine groups and the molecular weight. On one hand, the hyperbranched macromolecules with amine groups can rapidly diffuse and adsorb to the oil-water interface, on the other hand, the molecules with adequate molecular weight are apt to flocculate, coalesce oil droplets, and then obtain high-efficient demulsi-fication. The exceptional demulsification performance of h-PEI exhibits a potential role application in industrial water treatment or the petroleum demulsification industry.
Heating Quality and Stability of Aqueous Enzymatic Extraction of Fatty Acid-Balanced Oil in Comparison with Other Blended Oils

Yang Li,Dan Li,Baokun Qi,Sami Rokayya,Wenjun Ma,Jing Liang,Xiaonan Sui,Yan Zhang,Lianzhou Jiang

DOI: https://doi.org/10.1155/2014/530787

2014-01-01

Journal of Chemistry

Abstract:The heating performance of enzyme-assisted aqueous processing-extracted blended oil (EAEPO), hexane-extracted blended oil (HEBO), and three kinds of blended oils was investigated by varying the heating times. Oil degradation was monitored by analysis of the acid value (AV), peroxide value (PV),p-anisidine value (p-AV), color, and trans-fatty acid composition. The fatty acid ratios of EAEPO, HEBO, and the three kinds of blended oils were very similar (0.27 : 1.03 : 0.96, 0.27 : 1.08 : 1.16, 0.27 : 0.65 : 0.8, 0.27 : 0.6 : 0.84, and 0.27 : 0.61 : 0.79, resp.). The AV and color increased in proportion to the heating time for all the oils. There was a rapid increase in the PV andp-AV of EAEPO and HEBO after heating for only 1 h, whereas the other three blended oils showed a rapid increase after heating for 2 h or 6 h. Despite the highest trans-fatty acid content found for HEBO, this content was relatively low and remained low up to a heating time of 8 h. It was found that after heating, a fatty acid ratio relatively close to its ideal value (0.27 : 0.48 : 0.49) was maintained by EAEPO, which indicates that EAEPO is tolerant to heat treatment and is suitable for maintaining a healthy diet.
Effect of water bath‐assisted water extraction on physical and chemical properties of soybean oil body emulsion

Haotian Han,Luping Zhao,Xiaonan Liu,Anmin Guo,Xiangyang Li

DOI: https://doi.org/10.1002/fsn3.1921

2020-11-20

Abstract:<p>Soybean oil body (SOB), rich in polyunsaturated fatty acids and biologically active substances, is used as a natural emulsifier in food processing. In addition, SOB is healthier than synthetic emulsifiers. However, the physical and chemical properties of the SOB emulsion directly affect its application in food processing. In order to study the effect of water bath extraction (WBAE) on SOBs, the effects of WBAE method on the composition of SOBs, the zeta potential, average particle size, oxidation stability, and viscosity characteristics of SOB emulsions were researched. It was found that both protein and moisture contents of SOB decreased with increasing WBAE temperature; however, lipid content increased. These results were attributed to the exogenous proteins gradually denatured and dissociated with extraction temperature from 60°C to 100°C. Increasing the extraction temperature, the average particle size of the SOB emulsions increased, the oxidative stability was improved, the Zeta potential and viscosity decreased, and the fluidity of emulsions was improved. The SOB extracted at 100°C has broad application prospects in food, and this research is meaningful for supplying fundamental information for selecting proper extraction temperature of SOBs.</p>

food science & technology

Effect of Dietary Cholesterol on the Metabolic Rate of Hyperthyroid Rats.∗

[Disseminated intravascular coagulation and ruptured aneurysm of the abdominal aorta].

Effect of extraction pH and post-extraction heat treatment on the composition and interfacial properties of peanut oil bodies

A Novel Strategy for the Demulsification of Peanut Oil Body by Caproic Acid

Demulsification law of polyether demulsifier for W/O crude oil emulsion containing hydrophobically modified polyacrylamide in water

Demulsification of water-in-heavy oil emulsions by oxygen-enriched non-ionic demulsifier: Synthesis, characterization and mechanisms

Peanut de-oiling at room temperature by micro-aqueous hydration: Co-destabilization driven by oleosome coalescence and protein aggregation

Structural Study on Emulsion Formed during Enzyme-Assisted Aqueous Extraction from Soybean Oil

Hydrogen bond recombination regulated by strongly electronegative functional groups in demulsifiers for efficient separation of oil–water emulsions

Aqueous Enzymatic Extraction and Demulsification of Camellia Seed Oil (camellia Oleifera Abel.) and the Oil's Physicochemical Properties

Hyperbranched Poly(amido Amine) As an Effective Demulsifier for Oil-in-water Emulsions of Microdroplets

Effective biodemulsifier components secreted by Bacillus mojavensis XH-1 and analysis of the demulsification process

Analysis of Biological Demulsification Process of Water-in-oil Emulsion by Alcaligenes Sp. S-XJ-1.

The Effect of Hydrophobic Modified Block Copolymers on Water–Oil Interfacial Properties and the Demulsification of Crude Oil Emulsions

Effect of polyacid on crude oil emulsifying properties of amphiphilic polymer supramolecular system

Methacrylated Hyperbranched Polyglycerol As a High-Efficiency Demulsifier for Oil-in-Water Emulsions

Investigation of the stability of microemulsion in extraction organic phase of saponated P507

Investigation on the Emulsification Mechanism in Aqueous Enzymatic Extraction of Edible Oil from Schizochytrium sp.

Hyperbranched Polyethyleneimine for High-Effective Oil-Water Separation

Heating Quality and Stability of Aqueous Enzymatic Extraction of Fatty Acid-Balanced Oil in Comparison with Other Blended Oils

Effect of water bath‐assisted water extraction on physical and chemical properties of soybean oil body emulsion