Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

Aramid Honeycomb Cores under Constant Pressure: Unveiling the Out-of-Plane Compression Deformation

Dynamic fracture of aramid paper honeycomb subjected to impact loading

The Flatwise Compressive Properties of Nomex Honeycomb Core with Debonding Imperfections in the Double Cell Wall

Quasi-static compressive response and energy absorption mechanism of all-CFRP honeycomb core using digital image correlation (DIC)

The Variation Mechanism of Core Pressure and Its Influence on the Surface Quality of Honeycomb Sandwich Composite with Thin Facesheets

Mechanical Behaviors of Carbon Fiber Composite Sandwich Columns with Three Dimensional Honeycomb Cores under In-Plane Compression

Bending Behaviors of Carbon Fiber Composite Honeycomb Cores with Various In-Plane Stiffness

In-plane crushing behavior and energy absorption of CFRP honeycombs with different core topologies

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

Mechanical Properties and Damage Failure of Carbon Fiber Reinforced Polymer Composite Sandwich Structure with Square Honeycomb Core Using the Interlocking Method

Bending Response of Carbon Fiber Composite Sandwich Beams with Three Dimensional Honeycomb Cores

Theoretical Modeling and Mechanical Characterization at Increasing Temperatures under Compressive Loads of Al Core and Honeycomb Sandwich

Longitudinal Shear Strength and Failure Process of Honeycomb Cores

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

The Effect of Loading Rate on the Compression Properties of Carbon Fibre-Reinforced Epoxy Honeycomb Structures

The energy-absorbing characteristics of carbon fiber-reinforced epoxy honeycomb structures

Surface Matching Design of Carbon Fiber Composite Honeycomb

Influence of deformation constraints of core cells on the bending stiffness of single-face honeycomb core sandwich

Deformation and Failure Behavior of Wooden Sandwich Composites with Taiji Honeycomb Core under a Three-Point Bending Test

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials