I. Über den Zusammenhang von ungewöhnlichen Wucherungen atypischen und ortsfremden Epithels der Bronchien mit Bronchiektasien

W. Pagel

DOI: https://doi.org/10.1007/BF01996859

1926-12-01

Virchows Archiv für Pathologische Anatomie und Physiologie und für Klinische Medizin

Abstract:

What problem does this paper attempt to address?

Development of Antimicrobial and Insecticidal Silk Fabrics via Eco-printing with Natural Dyes from Agricultural Wastes

Ashgan Abdel Fattah Mohamed,Amr.M. Nassar,Fatma. H. Galal,Shaima. M. N. Moustafa

DOI: https://doi.org/10.1007/s12221-024-00625-1

IF: 2.5

2024-07-06

Fibers and Polymers

Abstract:Nowadays, sustainability is greatly aided by natural colors in the textile industry rather than harmful and carcinogenic synthetic dyes. Due to heightened knowledge of the risks to the environment and human health involved with the manufacturing and use of synthetic dyes, there is a greater demand for natural dyeing and printing. In this work, we employed a green technique for eco-printing and dyeing silk fabrics using some agricultural wastes, which resulted in the formation of bioactive silk fabrics that inhibit the growth of microbes and insects. In dying and eco-printing experiments, onion outer skin (quercetin), rose, eucalyptus, lemon, grape, and peach leaves, which are utilized in the eco-printing method for silk printing, were used in the experiments. The colorfastness to washing, perspiration, and crocking was evaluated by AATCC 61-2020, AATCC 15-2013, and AATCC 8-2016, respectively. By utilizing iron (II) sulfate and alum as mordents, botanical eco-printing techniques have expanded the color spectrum, altered color shades, and enhanced color output. The infrared (IR) spectra of silk in all stages of dying and printing were measured to study the mode of binding between silk and natural dyes. The bioactivity of eco-printed silk was tested in light of its antimicrobial and insecticide activities. Aspergillus flavus, Aspergillus niger , Bacillus cereus , Candida albicans, Candida glabrata, and Escherichia coli , were tested for antibacterial activity on eco-printed silk, and its efficacy was compared to that of undyed silk. The findings indicated that colored fabrics are effective because they exhibit a higher maximal inhibition area than undyed fabrics, with natural dye-drenched materials producing the highest level of inhibition (88%) against all isolated species. Dyed fabrics also demonstrated a respectable level of washing fastness. Scanning electron microscope (SEM) photos were collected after 5 and 10 days of incubation to track the growth of microbes on the textile surface. In addition, eco-printed silk outperformed undyed silk in its ability to repel Oryzaephilus surinamensis .

materials science, textiles,polymer science
Challenges and Advances in Aerosol Jet Printing of Regenerated Silk Fibroin Solutions

Yuhan Xiao,Kyriaki Kalaitzidou,Donggang Yao,Woon‐Hong Yeo,Tequila A. L. Harris

DOI: https://doi.org/10.1002/admi.201902005

IF: 5.4

2020-04-27

Advanced Materials Interfaces

Abstract:Silk fibroin materials are manufactured using printing and coating techniques at resolutions 1–2 µm. However, current processes are unstable, of low printability and versatility, and of limited feature size, and often require use of additives to process, which can impact material functionality and performance. Although there exist well established material synthesis and formulation approaches for making processable solutions from silkworm cocoons, these approaches do not translate to the emerging fabrication processes, such as aerosol jet printing (AJP). Here, a new approach is introduced to formulate silk‐worm solutions for AJP and subsequently analyze the processing limits, due to defects such as overspray, pooling, and cloudiness. It is found that the degumming step is critical and can lead to defects such as gelling and pooling. Furthermore, it is found that there exists a narrow processing window (sheath rate as a function of ink rate) for AJP formulations without defects. As with other materials (such as metal inks), overspray is an issue during the fabrication process; however, it is minimized within the processing window. This work stands to open a pathway for manufacturing new and emerging biodegradable materials suitable for pharmaceuticals, food packaging, and electronics, among others.

materials science, multidisciplinary,chemistry
Rheological properties of carboxymethyl hydroxypropyl cellulose and its application in high quality reactive dye inkjet printing on wool fabrics

Fangfang An,Kuanjun Fang,Xiuming Liu,Chang Li,Yingchao Liang,Hao Liu

DOI: https://doi.org/10.1016/j.ijbiomac.2020.08.216

IF: 8.2

2020-12-01

International Journal of Biological Macromolecules

Abstract:In this paper, the effect of rheological properties of pretreatment solutions, using carboxymethyl hydroxypropyl cellulose (CMHPC), sodium carboxymethyl cellulose (CMC), and sodium alginate (SA) as thickeners, on inkjet printing performance of wool with reactive dye inks was examined. Rheological, FESEM, and thickness results showed that fabrics treated with CMHPC solution, which exhibited superior fluidity, dominant elasticity property, and the largest zero-shear viscosity, produced the most continuous films and the lowest fabric thickness. Optical microscopy and XPS analyses confirmed that when compared with SA and CMC treated fabrics, CMHPC treated fabric controlled the excessive spread and penetration of ink droplets at higher effectiveness and produced the highest color strength (K/S value) and sharpest edge. In contrast to this, SA solution exhibited the worst fluidity, the most obvious viscous behavior, and lowest zero-shear viscosity. This resulted in the most discontinuous film, highest fabric thickness, and worst printing performance. Furthermore, wettability analysis demonstrated that the film structure dependent on the rheological property was the main factor that affected the inkjet printing performance of wool fabrics. CMHPC treatment of wool fabric provides an environment-friendly method with lower CMHPC concentration, less urea consumption, and shorter steaming time for higher K/S value.

polymer science,biochemistry & molecular biology,chemistry, applied
Different influences of hydroxypropyl methyl cellulose pretreatment on surface properties of cotton and polyamide in inkjet printing

Xiran Qiao,Kuanjun Fang,Xiuming Liu,Jixian Gong,Shuai Zhang,Jinkun Wang,Min Zhang

DOI: https://doi.org/10.1016/j.porgcoat.2022.106746

IF: 6.6

2022-04-01

Progress in Organic Coatings

Abstract:Because of the huge difference in the surface properties of cotton fibers and polyamide fibers, the cotton/polyamide fabric has a poor ink-jet printing effect without pretreatment, such as the lighter color and the poor definition. Herein, hydroxypropyl methyl cellulose was used to pretreat the cotton/polyamide fabric to improve the fabric surface properties. The results show that the surface property change of cotton fibers and polyamide fibers are diverse. Due to changes of groups on fiber surface, the surface hydrophilicity of cotton fiber is weakened, while the hydrophilicity of the polyamide fiber surface is enhanced. Meanwhile, the yarn gaps are filled by HPMC, which promotes the migration of the reactive dye inks to adjacent yarns instead of the spread along the single yarn. These combined effects control the diffuse of ink droplets on the fiber surface and are beneficial to improvement of inkjet printing color strength and sharpness for the cotton/polyamide fabrics. Compared with sodium alginate, the K/S of the pretreated cotton/polyamide fabric inkjet printed cyan, magenta, yellow and black are increased by38.5%, 61.2%, 30.9% and 30.5%, respectively. We believe that HPMC pretreatment is an easy and effective method to improve the inkjet printing performance of the cotton/polyamide fabric, which can be of great potential for industrial production in the future.

materials science, coatings & films,chemistry, applied
Construction of new surface on linen fabric by hydroxyethyl cellulose for improving inkjet printing performance of reactive dyes

Yingchao Liang,Xiuming Liu,Kuanjun Fang,Fangfang An,Chang Li,Hao Liu,Xiran Qiao,Shuai Zhang

DOI: https://doi.org/10.1016/j.porgcoat.2021.106179

IF: 6.6

2021-05-01

Progress in Organic Coatings

Abstract:Linen fabric as a natural fiber is one of the most popular textile products globally due to its excellent moisture absorption, antistatic, and antibacterial characteristics. However, it is still challenging to improve the color strength and utilization rate of reactive dye inks for printed linen fabrics. Herein, we proposed a polymer treatment agent to construct a new surface on linen fabric through a padding process, containing hydroxyethyl cellulose (HEC), sodium carbonate (Na2CO3) and urea. Then the fabric inkjet-printed with reactive dye inks. The results indicated that the HEC treated inkjet-printed linen fabric produced a higher performance with a satisfying fixation rate, more in-depth, and brighter color effect than sodium alginate (SA) treatment. SEM, wettability analysis, XPS and FTIR results revealed that the HEC treatment agent formed a film structure of the fabric to creat new surfaces with more hydrophobic of 46.5° contact angle and 0.9 s wetting time. XRD demonstrated no significant effect of HEC treatment on the aggregate structure of linen fiber. Also, the printed linen fabrics exhibited a satisfying color fastness and breaking strength.

materials science, coatings & films,chemistry, applied
High-performance Inkjet Printing Ink: Properties and Application Effects of Vinyl sulfone Reactive Dye-based Inks

Yun Li,Chuangui Cao,Fan Feng,Kuanjun Fang,Mengyue Wang,Ruyi Xie,Zhihui Zhao,Weichao Chen

DOI: https://doi.org/10.1016/j.molliq.2022.120864

IF: 6

2022-11-27

Journal of Molecular Liquids

Abstract:Benefiting its high reactivity with natural fabrics, vinyl sulfone reactive dyes have the advantage of obtaining good color fixation and high exhaustion rates under medium or low temperatures. Although these dyes were widely applied in traditional dyeing processes, little research has been conducted on vinyl sulfone dye-based inks for digital inkjet printing. Hence, we explore an efficient and environmental-friendly ink system for inkjet printing on natural fabrics. In this work, three vinyl sulfone reactive dyes including reactive orange 131 (O-131), reactive red AS (R-AS), and reactive blue 203 (B-203) were selected to simulate the stable structure of the dye molecules in aqueous solution by GAUSSIAN 09 package based on density functional theory (DFT). On this basis, the physicochemical properties of the inks were studied and the color fastness and apparent color depth values of cotton, linen, and silk inkjet printed fabrics were tested. As a result, compared to O-131 and B-203, the monomer molecular content of R-AS dye solutions was significantly reduced and displayed a strong tendency to aggregate. The surface tensions of three inks decreased with increasing concentrations and the degree of molecular aggregation. The rheological properties of the dye solutions were correlated with concentration and molecular weight. At the same concentrations, B-203 had the largest molecular weight and the solution exhibited the largest viscosity. The printed fabrics all possessed good color quality and color fastness, and printed silk fabric displayed higher color depth than cotton and linen fabrics. This work provided a cleaner and cost-effective ink for inkjet printing on natural fabrics by exploring the properties of vinyl sulfone reactive dye-based inks.

chemistry, physical,physics, atomic, molecular & chemical
Enhancing coloration performance and colour fastness of nano‐pigment ink‐jet‐printed blended fabrics through cationic and water‐repellent surface modification

Chenlu Zhu,Zhichang Zhang,Ni Wang,Yi Ding

DOI: https://doi.org/10.1111/cote.12796

2024-11-26

Coloration Technology

Abstract:The coloration performance and colour fastness properties, crucial for industrial textile printing, depend on the spreading and fixation behaviour of ink‐jet droplets on porous fabrics. Current nano‐pigment‐based ink‐jet applications provide unstable results for these properties, especially for synthetic and blended fabrics. This study focuses on cellulose‐based blended fabrics as substrates to modify the wetting properties of fabrics through cationic and water‐repellent treatments, to improve the coloration performance and colour fastness systematically. The study conducted analytical experiments to analyse the surface element composition, ion potential and surface morphology of the fabrics. Differences in printing colour and pattern performance were attributed to the behaviour of ink droplet spreading on the fabric surface and inside the fabric, including wetting time, colourant distribution, and ring shape. The results indicate that ink droplet spreading on fabrics significantly influences printing pattern sharpness, including edge clarity and colour intensity, which can be improved through surface modification, including cationic and water repellent treatment. The use of blended fabrics treated with 1% cationic modifier and 0.05% fluorine‐containing water repellent resulted in effective suppression of droplet formation and significant enhancement of colour performance and fastness. Furthermore, as the ink droplet volume decreased from 5 to 1 μL, the coffee ring effect on the fabric treated with the water repellent agent gradually diminished, leading to improved printing sharpness during the printing process.

engineering, chemical,chemistry, applied,materials science, textiles
Organic solvent free, high performance and cleaning reactive dye ink using hydroxypropyl methyl cellulose for inkjet printing

Kun Zhang,Kuanjun Fang,Yawei Song,Fuyun Sun

DOI: https://doi.org/10.1016/j.jclepro.2022.133654

IF: 11.1

2022-10-20

Journal of Cleaner Production

Abstract:Organic solvents adjusting the surface tension and viscosity of reactive dye inks for good droplet formation has resulted in low dye utilization and serious environmental pollution. Hydroxypropyl methyl cellulose (HPMC) has advantages of biocompatibility, renewability and excellent surface tension and viscosity. Here, an organic solvent free dye ink was developed using HPMC and the printability of HPMC/dye inks was compared with diethylene glycol (DEG)/dye inks and commercial inks. Only adding 0.6 wt% of HPMC could obtain good droplet formation, while DEG needed to be added by 50 wt%. The HPMC/dye ink printed patterns exhibited much deeper color than the DEG/dye ink and the commercial ink due to the less diffusion of HPMC/dye ink to the back of the fabric. moreover, as the small dosage of HPMC and the poor reactivity between HPMC and reactive dye, the coloring effluent of the HPMC/dye ink was less than the DEG/dye ink and the commercial ink. According to the data of World Textile Information Network, HPMC adjusting the jetting performance will save 1.4 billion ¥ than DEG in 2025. The HPMC/dye ink is a clean ink with advantages of high performance and low pollution and cost.

environmental sciences,green & sustainable science & technology,engineering, environmental
Application of monochloromethazine-modified guar gum as thickener in the penetration printing of silk fabric

Boran HAO,Jianzhong SHAO,Lili WANG

DOI: https://doi.org/10.3969/j.issn.1001-7003.2018.04.002

2018-01-01

Abstract:In order to obtain excellent penetration printing effect on silk fabric, guar gum (GG) was modified by monochlorotriazine di-sulfanilic acid (TS) modifier. Monochloromethazine-modified guar gum (TSG) was prepared. The flowing properties of TSG at different concentrations and penetration printing effect on silk fabric were studied. The results showed that Cross model could well depict the flowing characteristics of TSG and GG. In comparison with GG,the structural viscosity of TSG decreased and the flowing property becomes better. In reactive printing of silk fabric,TSG exhibited good penetration printing effect. Color yield of TSG is higher than that of GG and even surpassed SA. The penetration ratio of TSG reached up to more than 90%. Besides,TSG had the large patterns with good levelness and the fine patterns with clear outlines. Therefore, TSG has great potential application value in the penetration printing of silk fabric.
Synergistic Effects of Alpha Olefin Sulfonate and Sodium Alginate on Inkjet Printing of Cotton/Polyamide Fabrics

Chang Li,Lei Fang,Kuanjun Fang,Xiuming Liu,Fangfang An,Yingchao Liang,Hao Liu,Shuai Zhang,Xiran Qiao

DOI: https://doi.org/10.1021/acs.langmuir.0c02723

IF: 3.9

2021-01-06

Langmuir

Abstract:Bicomponent or multicomponent fiber fabrics are important materials for manufacturing high-performance textiles. However, the printing and dyeing of these fabrics are very difficult because the dyeability of different fibers varies greatly. The present study investigated the inkjet printing performance of interwoven fabrics of cotton and polyamide 6. The surfactant alpha olefin sulfonate (AOS) was incorporated into the sodium alginate (SA) solution to pretreat the fabrics to improve the color effects of printed fabrics. The results indicate that fabric pretreatment using 5% alpha olefin sulfonate and 2% sodium alginate significantly enhanced the image colors through increasing the hydrophilicity of the film formed on polyamide fibers and changing the surface morphology of both the fibers. The molecules of AOS interacted with the macromolecules of SA to form the composite films, where the AOS concentration gradient increased outward and SA concentration gradient increased inward. The synergistic pretreatment of alpha olefin sulfonate and sodium alginate endowed the fabrics with high inkjet printing performance, satisfactory color fastnesses, and durability.

chemistry, multidisciplinary, physical,materials science
"Print-to-pattern": Silk-Based Water Lithography.

Zhen Liu,Zhitao Zhou,Shaoqing Zhang,Long Sun,Zhifeng Shi,Ying Mao,Keyin Liu,Tiger H Tao

DOI: https://doi.org/10.1002/smll.201802953

IF: 13.3

2018-01-01

Small

Abstract:The requirement of nontoxic and versatile manufacturing frameworks for biologically relevant applications has imposed significant constraints on the choice of functional materials and the complementary fabrication tools. In this context, silk is actively studied, thanks to its mechanical robustness, biocompatibility, wide availability, aqueous processing conditions, and ease of functionalization. The inherent matching between the water solubility of silk and the aqueous inks of the inkjet printing (IJP) process has derived a biofriendly and versatile "print-to-pattern" scheme-termed silk-based water lithography-toward scalable functional biomanufacturing. The deposition mode of IJP and the etching effect of silk film by water features a dual tone fabrication where functional molecules are dispensed additively, while the silk film is patterned in a "subtractive" fashion. Such versatility and scalability pave the way to a wide range of opportunities in the biomedical field.
Preparation of Organic Pigment Microcapsules and Its Application in Pigment Printing of Silk Fabric

Fengyu She,Dongming Qi,Zhijie Chen,Jianzhong Shao,Lei Yang

DOI: https://doi.org/10.4028/www.scientific.net/amr.441.145

2012-01-01

Advanced Materials Research

Abstract:A series of submicron organic pigment microcapsules with high pigment encapsulating efficiency and narrow particles size distribution was prepared via in-situ miniemulsion polymerization. The self-adhesive pigment microcapsules were applied to pigment printing of silk fabrics. It was found from printing qualities that, the K/S value, handle, dry and wet rubbing fastness of silk fabrics printed by pigment microcapsules were much better than those printed by traditional pigment paste. The TEM observation of the printed fabrics further indicated that the presence of adhesive polymeric layer on the pigment particles can remarkably improve the dispersion of pigment particles on fabric surface and the adhesion between pigment particles and the target fabric.
Organofluorosilicon Modified Polyacrylate with the Unidirectional Migration Promotion of Disperse Dyes toward Polyester Fabric for Wash-Free Digital Inkjet Dyeing

Lili Wang,Huixian Dong,Keying Zheng,Nasha Zeng,Minghua Wu,Xi Wang,Huijun Li

DOI: https://doi.org/10.1021/acsami.4c08767

2024-07-31

Abstract:The printing and dyeing industry is currently accelerating toward a direction of high efficiency, energy conservation, environmental protection, and integration with digitalization. Disperse dye wash-free digital inkjet dyeing is a revolutionary breakthrough for cleaning and coloring polyester fabric. Based on the solubility parameters and the hot-melt dyeing characteristics of disperse dyes, soft, hard, and functional monomers of acrylate were used as the main body. Moreover, single-vinyl fluorinated polysiloxane and divinyl polysiloxane with low solubility parameters were used as modified monomers. A modified polyacrylate (PFSMA) adhesive containing silicon in the main chain and fluorine silicon in the side chain was prepared via miniemulsion polymerization. Using disperse digital inkjet dyeing of polyester fabric without washing can realize energy saving, emission reduction, and carbon reduction. Results showed that the optimum preparation conditions of PFSMA were as follows: DVFS molecular weight of 957 g/mol and DVFS content of 2.5 wt %. Compared with that of polyacrylate (PA), the glass-transition temperature of PFSMA film decreased, and its water resistance, toughness, and adhesion enhanced. When the PFSMA content in the wash-free disperse red ink was 8 wt %, the color yields of the front and back of the PFSMA jet-dyed polyester fabric were 18.86 and 13.28, respectively. Moreover, the color yield of the front of PFSMA jet-dyed polyester fabric was 39.9% higher than that of the pure liquid disperse red jet-dyed fabric. The simulated fixation rate was 87.9%, approximately 2.9 times higher than that of the PA wash-free jet-dyed fabric. The color fastness to dry rubbing reached level 4 and the color fastness to wet rubbing reached level 3-4, which was one level higher than that of pure liquid disperse red jet-dyed fabrics. The color fastness to soaping reached grade 5 and the color fastness to heat compression reached grades 4-5 and above. The fabric was a little firmer but smoother. The color properties, color fastness, and hand feeling of the PFSMA wash-free jet-dyed polyester fabric exceeded the levels of commercially available adhesives.
Preparation of Purpurin–Fe2+ Complex Natural Dye and Its Printing Performance on Silk Fabrics

Xiaojia Huang,Jie Luo,Xiangrong Wang,Xianwei Cheng,Xueni Hou

DOI: https://doi.org/10.3390/ma17215367

IF: 3.4

2024-11-03

Materials

Abstract:In order to shorten the process of textile printing with natural dyes, develop new methods, and improve the color fastness and quality of printed products, this study presents a novel approach by synthesizing a natural complex dye through the interaction between purpurin and Fe2+ ions, resulting in a compound named purpurin–Fe2+ (P-Fe). This synthesized complex dye was meticulously characterized using state-of-the-art analytical techniques, including Fourier transform infrared spectroscopy (FT-IR), ultraviolet–visible (UV–Vis) spectrophotometry, and scanning electron microscopy energy-dispersive spectroscopy (EDS). The characterization confirmed the successful complexation of purpurin with Fe2+ ions. The prepared complex dye P-Fe was used for the printing of silk fabric. The optimized printing process involves steaming at a temperature of 100 °C for a duration of 20 min. In comparison to fabrics printed using direct dyes, the K/S values of the fabric printed with the P-Fe complex showed a significant enhancement, with all color fastness ratings achieving grade four. Furthermore, the proportion of metal elements on the white background of the printed fabric was found to be less than 0.180%, and the level of whiteness was above 50. The application of the P-Fe dye in silk fabric printing not only streamlines the printing process but also enhances the depth and speed of the printed color, effectively addressing the issue of color transfer onto a white background, which is commonly associated with natural dyes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Plant-based ink properties and storage stability for inkjet printing

Alka Madhukar Thakker,Danmei Sun

DOI: https://doi.org/10.1007/s11356-023-31714-y

IF: 5.8

2024-01-04

Environmental Science and Pollution Research

Abstract:Abstract In this sustainability-oriented research, the properties of plant-based inks were evaluated denoting the viscosity range of 8.5 to 10 cP, the relative density of 1.06, conductivity value of 2.51 mS/cm, and the surface tension of 60 mN/m and pH of 4.9 to be most effective for inkjet printing. The changes in these properties to the one-month storage phase are detailed as determined with attenuated total reflectance – Fourier transform infrared spectroscopy, viscometer, and tensiometer. The varied colours of plant-based inks were stable to storage time except for the blue colour ink made from bio indigo herb that displayed agal-like sediments. After the storage phase, the plant-based inks exhibited anti-thixotropic viscosity except for yellow colour plant-based ink demonstrating thixotropic behaviour. High conductivity values of 18.5 and 15.6 mS/Cm were noted for blue and black colour plant-based inks, indicating their potential for constituting conducting inks; however, the conductivity values dropped to 7.5 and 9.5, respectively, after 1 month. The pH and surface tension were found steady during the storage period. The study of the life cycle analysis of plant-based inks is suggested for future work. The significance of this work in developing plant-based inks for inkjet printing of textiles lies in the convergence of sustainability and innovation. Plant-based inks can offer an eco-friendly alternative to traditional synthetic inks that are used currently, which provides a knowledge base for good practises meeting the environmentally conscious in the digital printing of the textile industry. These developed inks from this study can not only reduce the environmental impact but also promote a healthier ecosystem.

environmental sciences
Enhancement of natural dyeing properties and UV resistance of silk fibers modified by phenylboronic acid/hydroxypropyl‐β‐cyclodextrin functionalized Fe 3 O 4 particle

Xuemei He,Chao Wu,Chaowei Meng,Long Sun,Haiyan Mao,Lu Cai

DOI: https://doi.org/10.1002/app.52253

IF: 3

2022-02-20

Journal of Applied Polymer Science

Abstract:Abstract Silk fabrics with improved UV protection and natural dyeability were prepared by in‐situ deposition method, using 4‐carboxylphenylboronic acid (4‐CPBA) functionalized 2‐hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) covered magnetic Fe 3 O 4 particles. The as‐prepared silk fabrics were characterized by FT‐IR, XRD, XPS, TG‐DSC, and SEM techniques. The ultraviolet resistance and dyeing properties with grape seed proanthocyanidin extract (GSPE) for silk fabrics under different dyeing conditions was discussed in detail. The results showed that the phenylboronic acid functionalized HP‐β‐CD covered Fe 3 O 4 particle was deposited on the surface of silk fiber, enhancing the adsorption and fixation of GSPE, even in weak alkaline dyebath. PBA/HP‐β‐CD/Fe 3 O 4 modified silk fiber surface exhibited the higher color strength ( K / S ) and UV protection factor (UPF) than those of untreated silk fabrics under different dyeing conditions due to specific recognition and adsorption of cis‐diol‐containing GSPE dyes. Moreover, modified silk fabric possessed good color fastness after 20 times of washing circles. This study is expected to provide a promising approach to achieve functional protection and dyeing of silk fabrics.

polymer science
A novel quaternary ammonium triethanolamine modified polyester polyether for rapid wetting and penetration pretreatment for digital inkjet dyeing of polyester fabric

Lili Wang,Ming Qin,Jianlin Ma,Minghua Wu,Xi Wang,Huijun Li

DOI: https://doi.org/10.1016/j.colsurfa.2024.135447

IF: 5.518

2024-10-11

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Green environmental protection and digitisation are vital for the future development of the textile printing and dyeing industry. Dispersed dye digital inkjet dyeing, as a new technology, enables on-demand low-liquor dyeing and controllable segment dyeing of polyester fabric. This facilitates the transformation, upgrading and sustainable development of the printing and dyeing industry. Due to its inherent hydrophobicity, polyester fabric poses challenges in terms of quick wetting and penetration of ink droplets. To enhance its moisture absorption and rapid wettability, a novel pre-treatment agent, i.e. cationic polyester polyether (CPP), was synthesised via the triethanolamine quaternisation modification of polyester polyether. The wetting and penetration behaviours of ink droplets on the CPP-pre-treated fabric were studied, and the colour performance of CPP-pre-treated dyed fabric was investigated. Results showed that the optimal conditions for CPP synthesis were a DMT to PEG molar ratio of 3:1, a molecular weight of PEG 2000 and a PEG to NAB molar ratio of 1:0.2. At a CPP concentration of 0.3 %o.w.f., the CPP-pre-treated fabric exhibited excellent moisture absorption and rapid wetting with water spreading time of 4 s, wicking height of 9.5 cm/5 min and ink droplet spreading time of 960 ms. Compared with the original inkjet-dyed fabric, the front K/S value of CPP-pre-treated dyed fabric decreased to 17.1 and the back K/S value increased to 16.0. The colour penetration was 93.3 %, which was 13 % higher than that of the original fabric. Thus, CPP pre-treatment of polyester fabric can facilitate complete dyeing of the fabric even within the interior of yarns.

chemistry, physical
A novel colored chitosan-modified polystyrene composite dye nanospheres with enhanced coloring properties for binder-free printing

Jinyun Wu,Bo Li,Peibo Du,Xiaokai Xin,Zaisheng Cai,Fengyan Ge

DOI: https://doi.org/10.1016/j.dyepig.2024.112506

IF: 5.122

2024-10-26

Dyes and Pigments

Abstract:The limited utilization rate of dyes for coloring coupled with the consumption of large quantities of chemical reagents, can result in acute environmental pollution and waste of resources. Herein, in accordance with the electrostatic attraction between electropositivity of chitosan and anionic dyes, a novel type of chitosan-modified cationic polystyrene nanospheres (PSCS) was creatively synthesized, which can be innovatively employed as a special carrier with an adsorption capacity of up to 197.4mg/g for acid dyes. Consequently, a exclusive pigment identified as colored chitosan-modified polystyrene composite dye nanospheres (PSCS(AR9)) was procured. Simultaneously, the binder-free printing was accomplished by leveraging the intrinsic self-curing property of PSCS(AR9) for screen printing of textiles. Additionally, printed fabrics with PSCS(AR9) exhibited superb darkening effect (the K/S value can be increased by 2 times.) in conjunction with significantly improved hand feel in contrast with the conventional printed fabrics. The last but not least, the rubbing fastness of the printed fabrics using PSCS(AR9) can meet demand of the practical application. Therefore, this work may provide an innovative insight for constructing a new type of environmentally friendly and depth-enhanced printed textile.

engineering, chemical,chemistry, applied,materials science, textiles
Assessment of coffee-ring effect on wool and cotton fabrics inkjet printed with herbal inks

Alka Madhukar Thakker,Danmei Sun

DOI: https://doi.org/10.1080/00405000.2023.2220185

IF: 1.7698

2023-06-15

Journal of the Textile Institute

Abstract:In this study, the ecologically pre-treated wool and cotton fabrics were digitally printed with eco-friendly plant-based inks of blue, red, yellow, and black colours obtained from the plant extracts of bio indigo leaves, quebracho red bark and the flame of the forest flowers and evaluated for coffee-ring effect. The plant-based inks constituted from the Quebracho red bark and the flame of the forest flowers extract both demonstrated reduced dispersion diameter (i.e. diffused) for the Plasma Surface Treated (PST) wool and cotton fabric than the untreated. These findings could be applied for digital printing on photonics to combat the Coffee-ring effect. The possible explanation for the reduced coffee ring effect is the phenomenon known as Marangoni flow. The predominant phytochemicals functioning as chromophores namely indigotin, tannin and butein enclosed in inks constituted from the plant extracts of bio indigo leaves, quebracho red bark and the flame of the forest flowers respectively are highlighted. Additionally, the synthesis of plant-based ink, the colour scheme adapted for determining the inks colours, and the technique of print process as implemented in the study are explained. Likewise, the Colour patch, Percentage (%) Reflectance, and, Colour difference graphs as acquired from Datacolor tools are demonstrated. To end, the wash fastness, rub fastness, and light fastness test results obtained on wool and cotton fabrics digitally printed with innovative plant-based inks are detailed. The Life Cycle Analysis and assessment of functional phytochemicals on the resultant printed fabrics are suggested for future work.

materials science, textiles
Study on the Modification and Properties of Silk Sericin Protein/Nano-Titanium Dioxide Composite for Textile Applications

Chen Yang,Yanping Lin,Xiangai Zhang,Chunyan Zhu

DOI: https://doi.org/10.2478/ftee-2024-0008

2024-02-01

Abstract:Abstract Silk sericin protein is a natural high-molecular-weight compound that contains eighteen types of amino acids. It is non-toxic, biodegradable, and biocompatible, with simple preparation methods and low cost. It finds widespread application in functional clothing, medical and pharmaceutical fields, tissue engineering, and more. Nano-titanium dioxide, on the other hand, possesses non-toxic, self-cleaning, antibacterial, and deodorizing properties. To develop multifunctional textiles with deodorization, UV protection, and good thermal and mechanical properties, this study utilized a compounding method to modify citric acid-pre-treated cotton fabrics through a two-dipping and two-padding process using a blend finishing solution of silk sericin protein and nano-titanium dioxide. Observations of the microstructure before and after fabric finishing, along with evaluations of deodorization, UV protection, and thermal properties, revealed that controlling the proportion of the silk sericin protein/nano-titanium dioxide blend finishing solution can result in a smooth surface of the modified cotton fabric. This modification not only enhances the fabric’s UV protection and tensile strength but also improves its thermal properties while imparting certain deodorization capabilities. Comprehensive analysis concludes that using silk sericin protein and nano-titanium dioxide for modifying cotton fabric to prepare multifunctional textiles with deodorization, UV protection, and good thermal and mechanical performance is feasibly viable.

materials science, textiles

I. Über den Zusammenhang von ungewöhnlichen Wucherungen atypischen und ortsfremden Epithels der Bronchien mit Bronchiektasien

Development of Antimicrobial and Insecticidal Silk Fabrics via Eco-printing with Natural Dyes from Agricultural Wastes

Challenges and Advances in Aerosol Jet Printing of Regenerated Silk Fibroin Solutions

Rheological properties of carboxymethyl hydroxypropyl cellulose and its application in high quality reactive dye inkjet printing on wool fabrics

Different influences of hydroxypropyl methyl cellulose pretreatment on surface properties of cotton and polyamide in inkjet printing

Construction of new surface on linen fabric by hydroxyethyl cellulose for improving inkjet printing performance of reactive dyes

High-performance Inkjet Printing Ink: Properties and Application Effects of Vinyl sulfone Reactive Dye-based Inks

Enhancing coloration performance and colour fastness of nano‐pigment ink‐jet‐printed blended fabrics through cationic and water‐repellent surface modification

Organic solvent free, high performance and cleaning reactive dye ink using hydroxypropyl methyl cellulose for inkjet printing

Application of monochloromethazine-modified guar gum as thickener in the penetration printing of silk fabric

Synergistic Effects of Alpha Olefin Sulfonate and Sodium Alginate on Inkjet Printing of Cotton/Polyamide Fabrics

"Print-to-pattern": Silk-Based Water Lithography.

Preparation of Organic Pigment Microcapsules and Its Application in Pigment Printing of Silk Fabric

Organofluorosilicon Modified Polyacrylate with the Unidirectional Migration Promotion of Disperse Dyes toward Polyester Fabric for Wash-Free Digital Inkjet Dyeing

Preparation of Purpurin–Fe2+ Complex Natural Dye and Its Printing Performance on Silk Fabrics

Plant-based ink properties and storage stability for inkjet printing

Enhancement of natural dyeing properties and UV resistance of silk fibers modified by phenylboronic acid/hydroxypropyl‐β‐cyclodextrin functionalized Fe 3 O 4 particle

A novel quaternary ammonium triethanolamine modified polyester polyether for rapid wetting and penetration pretreatment for digital inkjet dyeing of polyester fabric

A novel colored chitosan-modified polystyrene composite dye nanospheres with enhanced coloring properties for binder-free printing

Assessment of coffee-ring effect on wool and cotton fabrics inkjet printed with herbal inks

Study on the Modification and Properties of Silk Sericin Protein/Nano-Titanium Dioxide Composite for Textile Applications