Abstract:Lightning is one of the natural hazards that any aircraft may encounter while navigating. If adequate precautions are not taken against lightning, structural damage, operational disruptions, and loss of life and property can occur. Thus, studying the mechanism of damage caused by lightning strikes in an aircraft's structural material is necessary to optimize the structure, minimize the damage, and reduce the cost caused by lightning. In the present article, the lightning-induced damage behavior of an aircraft structural material was investigated from an analytical perspective. For this purpose, two analytical-based models were developed: an improved electromagnetic pressure impact model (IEPIM) and the damage model in an aircraft wing. For the IEPIM, the findings of the article showed that the proposed pressure model is in good agreement with the experimental studies, borrowed from the open literature, for 100 and 200 kA lightning current. For the damage model, the findings of the article indicated that (i) even though lightning strikes to the regions with the same characteristics on an aircraft wing in terms of the lightning strike zone, the amount of deflection in the wing increases as the impact point approaches the wing tip and decreases as it approaches the wing root, (ii) without changing the lightning strike point ( x0 ), when the damping coefficient ( ξ ) is increased in the range of 0,2ξ , the amount of deflection decreases as the amount of damping coefficient increases, and (iii) when lightning with a current of 100 kA hits to the wing root of an aircraft, the pressure impact of the lightning causes more torsion deflection than bending deflection at the wing root; however, when it hits to the mid-wing or wing tip of an aircraft, the pressure impact of the lightning causes more bending deflection than torsion deflection at the mid-wing or wing tip.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: to study the damage behavior of aircraft structural materials, especially the wings, caused by lightning strikes under lightning pressure loads. Specifically, the article aims to optimize aircraft structure design, minimize the damage caused by lightning strikes and reduce the resulting costs by developing and applying two analysis - based models - the Improved Electromagnetic Pressure Impact Model (IEPIM) and the damage model of aircraft wings under lightning strikes. ### Background and Problem Description of the Paper 1. **Hazards of Lightning Strikes** - Lightning strike is a natural hazard that an aircraft may encounter during flight. - If sufficient preventive measures are not taken, lightning strikes may lead to structural damage, operation interruption, and even cause casualties and property losses. - Studying the impact of lightning strikes on aircraft structural materials is crucial for optimizing structure design, minimizing damage and reducing costs. 2. **Limitations of Existing Research** - Although experiments and numerical simulations have made certain progress, it is still very difficult to fully understand the impact due to the multi - physical characteristics of lightning strikes. - Although the experimental method is reliable, it is time - consuming and costly to conduct reasonable and effective experiments in the actual environment and ideal conditions. - Although numerical simulation has made progress, the current technical conditions cannot fully solve the lightning strike problem yet. ### Research Objectives of the Paper The objective of this paper is to study the damage behavior of aircraft structural materials caused by lightning strikes from an analytical perspective, and for this purpose, two analysis - based models are proposed: 1. **Improved Electromagnetic Pressure Impact Model (IEPIM)** - It is used for modeling the pressure loading of lightning. - It takes into account the distributed pressure effect of lightning and the time - varying characteristics of the arc - path radius. 2. **Damage Model of Aircraft Wings** - It is used to evaluate the damage to aircraft wings caused by lightning pressure loading. - This model is solved through free vibration analysis and forced vibration analysis. ### Main Findings - **Effectiveness of IEPIM** - The proposed pressure model is consistent with the experimental results in the literature, especially in the cases of 100 kA and 200 kA lightning currents. - **Key Findings of the Damage Model** - Even if the lightning strike occurs in an area with the same characteristics, the deformation of the wing will increase as the impact point approaches the wing tip and decrease as it approaches the wing root. - Increasing the damping coefficient will reduce the deformation. - When a 100 kA lightning current strikes the wing root, the torsional deformation caused by the lightning pressure is greater than the bending deformation; while at the mid - wing or wing tip, the bending deformation is dominant. Through these studies, the paper provides new insights and tools for understanding and predicting the impact of lightning strikes on aircraft structures, which helps to improve the safety and economy of aircraft.

An Analytical-Based Lightning-Induced Damage Model for an Aircraft Wing Exposed to Pressure Loading of Lightning

Design of a Hybrid Carbon Fibre/carbon Nanotube Composite for Enhanced Lightning Strike Resistance

Simulation research on impact damages under low velocities of composite grid structures for aircraft wing

Analysis of Aircraft Damage from a Lightning Strike

Deformation and Damage Mechanisms of Laminated Glass Windows Subjected to High Velocity Soft Impact

Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage

Characterisation of the lightning strike damage mechanics onto composite materials and discussion on its numerical modelling techniques: review

Understanding lightning damage formation in a carbon-epoxy Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) composite

Experimental and Modelling of Lightning Damage to Carbon Fibre-Reinforced Composites under Swept Stroke

The Development of a Multi-Physics Approach for Modelling the Response of Aerospace Fastener Assemblies to Lightning Attachment

The prediction model for resistance of composite interference‐fit joint subjected to current strike

Analysis of carbon fiber destruction by lighting current

Assessment on aerodynamic degradation for wing-damaged transport aircraft

Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

An evaluation model of bearing capacity for CFRP connection structure with lightning thermal damage

Damage-mitigating control of aircraft for enhanced structural durability

Damage of Nickel-coated glass/epoxy foam-core composites induced by artificial lightning strikes

Lightning strike-induced dynamic conduction characteristics and damage behavior of carbon fiber-reinforced polymer composites

Optimization Analysis on the Crashworthiness of Light Aircrafts

Nonlinear analysis model of the progressive damage of aluminum–wood sandwich structures under high-speed impact conditions

Research on Fault-Tolerant Control of Combined Airframe Damage of Electric Aircraft