Abstract:Porous silicate supported micro-nano zero-valent iron (PSi@ZVI) was prepared from copper slag (CS) through carbothermal reduction technology, and used as a persulfate (PS) activator for removing organic contaminants. Results showed that the properties of the activator were greatly affected by the preparation conditions. Calcination for 20 min at 1100 degrees C with 20% anthracite was considered the optimum preparation condition for degradation of orange G (OG). The removal rate of OG was improved by increasing the dosages of PSi@ZVI or PS and raising the reaction temperature. Moreover, PSi@ZVI exhibited excellent PS activator ability in a wide range of initial pH, good degradation capability for eosin Y, methyl orange, acid fuchsine and methylene blue. The reusability and safety of PSi@ZVI were verified. Electron paramagnetic resonance and radical quenching tests indicated that sulfate radical (SO4 center dot(-)) was the main active species in the PSi@ZVI/PS system. The X-ray diffraction results indicated that a high calcination temperature (1100 degrees C) was beneficial to the reduction of iron-bearing minerals to ZVI. Scanning electron microscopy and energy-dispersive spectroscopy results revealed that the formation of porous structure of PSi@ZVI and the generation of nano to micro-sized ZVI particles on the surface of the silicate holes. The X-ray photoelectron spectra showed that ZVI was first convert into Fe(II), which mainly activated PS and generated Fe(III) in the PSi@ZVI/PS system. Furthermore, the intermediates of OG were detected using gas chromatography mass spectrometry, and the possible degradation pathway of OG was proposed. This study provides a novel approach for reuse of CS as a heterogeneous activator to effectively activate PS. (C) 2020 Elsevier B.V. All rights reserved.

Trade-off between sulfidated zero-valent iron reactivity and air stability: Regulation of iron sulfides by ammonium dihydrogen phosphate

Preparation of Porous Silicate Supported Micro-Nano Zero-Valent Iron from Copper Slag and Used As Persulfate Activator for Removing Organic Contaminants.

Agar-stabilized sulfidated microscale zero-valent iron: Its stability and performance in chromate reduction

Combining high electron transfer efficiency and oxidation resistance in nZVI with coatings of microbial extracellular polymeric substances to enhance Sb(V) reduction and adsorption

Dechlorination and defluorination capability of sulfidized nanoscale zerovalent iron with suppressed water reactivity

Sulfidation of Nanoscale Zero-Valent Iron by Sulfide: The Dynamic Process, Mechanism, and Role of Ferrous Iron

Sulfur Loading and Speciation Control the Hydrophobicity, Electron Transfer, Reactivity, and Selectivity of Sulfidized Nanoscale Zerovalent Iron

Insights into the role of FeP in phosphatized zero-valent iron for enhanced contaminant reduction

Rich surface hydroxyl design for nanostructured TiO2 and its hole-trapping effect

Sulfur Dose and Sulfidation Time Affect Reactivity and Selectivity of Post-Sulfidized Nanoscale Zerovalent Iron

Critical roles of sulfidation solvent in controlling surface properties and the dechlorination reactivity of S-nZVI

Correlating Surface Chemistry and Hydrophobicity of Sulfidized Nanoscale Zerovalent Iron with Its Reactivity and Selectivity for Denitration and Dechlorination

Nitrate reduction using nanosized zero-valent iron supported by polystyrene resins: Role of surface functional groups

Resolve the species-specific effects of iron (hydr)oxides on the performance of underlying zerovalent iron for metalloid removal: Identification of their key properties

Decoding the divalent cation effect on sulfidation of zero-valent iron: Phase evolution and FeS x assembly

Enhanced retention of surface-adsorbed atomic hydrogen through sulfidation of nano zerovalent iron for water decontamination

Synthesis of stabilized zero-valent iron particles and role investigation of humic acid-Fe x+ shell in Fenton-like reactions and surface stability control

Sulfide-modified zerovalent iron for enhanced antimonite sequestration: Characterization, performance, and reaction mechanisms

Interaction of chromium-sulfur-iron during Cr(VI) stabilization by polysulfide-modified nanoscale zero-valent iron for groundwater remediation: Batch experiments and numerical simulation

Sulfide mediated zero valent iron for enhanced nickel removal under neutral condition: Reaction kinetic, mechanism, and stability

Effect of sulfidation on nitrobenzene removal from groundwater by microscale zero-valent iron: Insights into reactivity, reaction sites and removal pathways