Performance of data acceptance criteria over 50 months from an automatic real-time environmental radiation surveillance network.

R. Casanovas,J. Morant,M. López,I. Hernandez-Giron,E. Batalla,M. Salvadó

DOI: https://doi.org/10.1016/j.jenvrad.2011.04.001

IF: 2.655

2011-08-01

Journal of Environmental Radioactivity

Abstract:

What problem does this paper attempt to address?

RE SEARCH ON EN ERGY SPEC TRUM ANOM ALY DE TEC TION METHOD FOR STATE CON TROL RA DI A TION EN VI RON MEN TAL MON I TOR ING BASED ON LOF AL GO RITHM

Yunlong Niu,Yunfeia Luo,Feiyun Cong,Huidi Zheng,Xinggao Liu

DOI: https://doi.org/10.2298/ntrp2401047y

2024-01-01

Abstract:The state-controlled radiation environment automatic monitoring stations are important facilities for monitoring the quality and trends of the radiation environment. However, the anal ysis and utilization of monitoring data from these stations have limitations. To address this is sue, this pa per pro poses an ap proach that uti lizes the high-di men sional data vi su al iza tion method based on t-SNE and PCA-BIRCH algorithm's spectrum clustering model to classify historical spectrum data. Subsequently, a local outlier factor-based environmental spectrum abnormal fluctuation detection model is established to enhance discrimination of non-environmental factors causing spectrum anomalies. Results indicate significant differences in spectrum aggregation under different meteorological conditions. The clustering algo rithm ef fec tively sep a rates clear and rainy weather spec tra based on spec tral fea tures, with min i mal time con sump tion and re duced in ter fer ence from mixed spec trum data. By uti liz ing local density features, we establish an anomaly detection model, assigning an abnormal score to each spectrum. Comparative analysis demonstrates improved discriminability of the anomaly detection model for unclassified datasets. Our algorithm accurately identifies spectrum fluctuations caused by non-environmental factors amidst complex backgrounds, offering valuable technical support for environmental quality assurance and nuclear emergency decision-making.
A 291-day Evaluation of the Performance of a Consumer-grade Temporal Radon Detector

Carly E Evans,Kimberlee J Kearfott

DOI: https://doi.org/10.1097/HP.0000000000001858

2025-01-01

Abstract:Affordable, accurate, and robust temporal measurement devices are desirable for screening and assessment of radon levels in private homes and workplaces. This research expands upon prior research, using the RadonFTlab RadonEye device through a comparison of multiple samples of this instrument with a laboratory-grade instrument, the Saphymo AlphaGUARD, over a more extensive period than reported previously. Data were collected over 291 d in a poorly ventilated basement space in an occupied building. Environmental conditions varied naturally, changing both the radon source term and radon entry into the space approximating typically deployed conditions. The R-squared linear regression correlation coefficient and relative sensitivities of each RadonEye with the AlphaGUARD were computed. Overall temporal and diurnal variations were also studied. The sensitivities of all RadonEyes and the AlphaGUARD agreed to within 22% throughout the entire deployment period.
Long-term field studies of a distributed network of sensors for environmental radiological monitoring

N. Heracleous,K. Bauer,L. Gallego Manzano,F. Murtas,M. Silari,L. Svihrova

DOI: https://doi.org/10.1016/j.radmeas.2024.107065

IF: 1.743

2024-01-25

Radiation Measurements

Abstract:The W-MON project goal is to establish an automatic control mechanism of the presence of radioactive material in conventional waste containers at CERN using a distributed network of interconnected low-power radiation sensors. This network facilitates continuous data recording, transfer and storage in a database while allowing online and offline data analysis, in addition to alarm triggering. Data transmission, processing and evaluation is achieved by a centralised IoT end-to-end data architecture that has been developed for real-time monitoring and visualisation of the radiation levels in waste containers. In this paper the results of field tests of the W-MON system described in two previous papers are presented for three different types of sensors. Estimation of failure detection probability, long-term stability tests and sensitivity studies carried out using radioactive samples of various activities placed in standard waste containers are described. A comparison between the manual monitoring procedure currently used at CERN and the W-MON system is discussed in detail.

nuclear science & technology
Investigation of the Performance of Various Low-Cost Radon Monitors under Variable Environmental Conditions

Daniel Rábago,Enrique Fernández,Santiago Celaya,Ismael Fuente,Alicia Fernández,Jorge Quindós,Raúl Rodriguez,Luis Quindós,Carlos Sainz

DOI: https://doi.org/10.3390/s24061836

IF: 3.9

2024-03-13

Sensors

Abstract:A comparison of low-cost radon monitors was conducted at the Laboratory of Natural Radiation (LNR). The monitors we evaluated were EcoQube, RadonEye, RadonEye Plus2, Spirit, ViewPlus, ViewRadon and WavePlus. An AlphaGUARD monitor calibrated at the Laboratory of Environmental Radioactivity of the University of Cantabria (LaRUC), accredited for testing and calibration according to ISO/IEC 17025, provided the reference value of radon concentration. The temporal stability of the monitors was studied, obtaining a percentage of missing records ranged from 1% to 19% of the data. The main technical characteristics studied were temporal stability, measurement ranges, accuracy, correlation and response time. The main results show that the measurement ranges align with those specified by their manufacturers, with percentage differences with respect to the reference monitor of between 5% and 16%. The diversity found for response time is remarkable, with values ranging from 1 to 15 h, with Pearson correlation factors between 0.63 and 0.90.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Improving Data Quality of Low-Cost Light-Scattering PM Sensors: Toward Automatic Air Quality Monitoring in Urban Environments

Gustavo Ramirez-Espinosa,Pietro Chiavassa,Edoardo Giusto,Stefano Quer,Bartolomeo Montrucchio,Maurizio Rebaudengo

DOI: https://doi.org/10.1109/jiot.2024.3405623

IF: 10.6

2024-08-25

IEEE Internet of Things Journal

Abstract:Low-cost light-scattering particulate matter (PM) sensors are often advocated for the dense monitoring networks. Recent literature has focused on evaluating their performance. Nonetheless, low-cost sensors are also considered unreliable and imprecise. Consequently, exploring techniques for anomaly detection, resilient calibration, and data quality improvement should be discussed more. In this study, we analyse a year-long acquisition campaign by positioning 56 low-cost light-scattering sensors near the inlet of an official PM monitoring station. We use the collected measurements to design and test a data processing pipeline composed of different stages, including fault detection, filtering, outlier removal, and calibration. These can be used in large-scale deployment scenarios where the quantity of sensors' data can be too high to be analysed manually. Our framework also exploits sensor redundancy to improve reliability and accuracy. Our results show that the proposed data processing framework produces more reliable measurements, reduces errors, and increases the correlation with the official reference.

computer science, information systems,telecommunications,engineering, electrical & electronic
Long term Experience in Autonomous Stations and production quality control

L. Lopes,A. B. Alves,P. Assis,A. Blanco,N. Carolino,M. A. Cerda,R. Conceição,O. Cunha,C. Dobrigkeit,M. Ferreira,P. Fonte,L. de Almeida,R. Luz,V. B. Martins,L. Mendes,J. C. Nogueira,A. Pereira,M. Pimenta,R. Sarmento,V. de Souza,B. Tomé

DOI: https://doi.org/10.1088/1748-0221/14/07/C07002

2018-06-29

Abstract:Large area arrays composed by dispersed stations are of major importance in experiments where Extended Air Shower (EAS) sampling is necessary. In those dispersed stations is mandatory to have detectors that requires very low maintenance and shows good resilience to environmental conditions. In 2012 our group started to work in RPCs that could become acceptable candidates to operate within these conditions. Since that time, more than 30 complete detectors were produced, tested and installed in different places, both indoor and outdoor. The data and analysis to be presented is manly related to the tests made in the Auger site, where two RPCs are under test in real conditions for more than two years. The results confirm the capability to operate such kind of RPCs for long time periods under harsh conditions at a stable efficiency. In the last years Lip and USP - São Carlos start collaboration that aim to install an Eng. Array at BATATA (Auger) site to better study and improve the resilience and performance of the RPCs in outdoor experiments. The organization of such collaboration and the work done so far will be presented.

Instrumentation and Methods for Astrophysics
Method validation and quality assurance of an ICP-MS protocol for the evaluation of trace and major elements in ambient aerosol samples and application to an air quality surveillance network

M. R. Palomo-Marín,E. Pinilla-Gil,L. Calvo-Blázquez,X. Querol-Carceller

DOI: https://doi.org/10.1007/s00769-014-1099-7

2014-12-30

Accreditation and Quality Assurance

Abstract:This study presents the results of a quality assurance evaluation program applied to the method routinely used for the evaluation of a large elemental profile in aerosol samples from the air quality surveillance network of Extremadura, Spain, where low pollution levels are usually encountered. A critical evaluation of the most relevant analytical steps is presented, including long-term blank values evaluation, limits of detection, certified reference material recoveries, method uncertainty and results of comparison studies for gravimetric and trace element analysis. Results obtained at the air quality network of Extremadura for the gravimetric and multielemental analysis are presented for the 2008 campaign.

chemistry, analytical,instruments & instrumentation
Long term measurement of the $^{222}$Rn concentration in the Canfranc Underground Laboratory

J. Amaré,I. Bandac,A. Blancas,S. Borjabad,S. Buisán,S. Cebrián,D. Cintas,I. Coarasa,E. García,M. Martínez,R. Núñez Lagos,M.A. Oliván,Y. Ortigoza,A. Ortiz de Solórzano,C. Pérez,J. Puimedón,S. Rodríguez,A. Salinas,M.L. Sarsa,P. Villar

DOI: https://doi.org/10.1140/epjc/s10052-022-10859-z

2022-03-26

Abstract:We report the results of six years (2013-2018) of measurements of $^{222}$Rn air concentration, relative humidity, atmospheric pressure and temperature in the halls A, B and C of the Canfranc Underground Laboratory (LSC). We have calculated all the Pearson correlation coefficients among these parameters and we have found a positive correlation between the $^{222}$Rn concentration and the relative humidity. Both correlated variables show a seasonal periodicity. The joint analysis of laboratory data and four years (2015-2018) of the meteorological variables outside the laboratory shows the correlation between the $^{222}$Rn concentration and the outside temperature. The collected information stresses the relevance of designing good Rn-mitigation strategies in current and future experiments at LSC; in particular, we have checked for two years (2017-2018) the good performance of the mitigation procedure of the ANAIS--112 experiment. Finally, in another measurement (2019-2021) for two years of live time, we report an upper limit to the residual $^{222}$Rn content of the radon-free air provided by the radon abatement system installed in the laboratory.

Instrumentation and Detectors,Instrumentation and Methods for Astrophysics
Long-term comparison and performance study of consumer grade electronic radon integrating monitors

Z Daraktchieva,C B Howarth,J M Wasikiewicz,C A Miller,D A Wright

DOI: https://doi.org/10.1088/1361-6498/ad66db

2024-07-25

Journal of Radiological Protection

Abstract:This study reports the performance of 7 types of consumer grade passive Electronic Radon Integrating Monitors, ERIM (AlphaE, AER Plus, Canary, Corentium Pro, Radon Scout Home, Ramon and Wave) and passive etched track radon detectors. All monitors and passive radon detectors were exposed side by side for 2 periods of 3 months under controlled conditions in the UKHSA radon chamber and in a stainless steel container to an average radon concentration of 4781 Bq m-3 and 166 Bq m-3, respectively. The performance of each individual monitor was compared with Atmos 12DPX and AlphaGUARD P30 reference instruments. The performance of the monitors was evaluated by estimating the biased, precision and measurement errors of each type. It was found that UKHSA passive radon detectors showed excellent performance (measurement error < 10%) at both higher and lower exposures. The AlphaE, Canary and Ramon showed excellent performance, with measurement error < 10%, when they were exposed to radon concentrations between 4000 Bq m-3 and 6000 Bq m-3 in the UKHSA radon chamber. However, when the monitors were exposed to radon levels below the UK radon Action Level of 200 Bq m-3, the only ERIM which had a measurement error <10% was the Radon Scout Home. All other monitors showed a significant decrease in their performance with measurement errors ranging between 20% and 50%. The calibration factor, which is the ratio between the measured value (background is subtracted) and the reference value, was also studied. It was found that the calibration factors of individual monitors changed significantly. Calibration measurements in 2019 and in 2023 found that the percentage change varied between -46% and +63%. This shows the importance of initial and regular calibration, and maintenance of the monitors.

environmental sciences,public, environmental & occupational health,radiology, nuclear medicine & medical imaging,nuclear science & technology
Gamma Dose Rate Measurements in Northern Spain: Influence of Local Meteorological Scenarios on Radiological "False Alarms" in a Real-Time Radiological Monitoring Network

Natalia Alegría,Miguel Ángel Hernández-Ceballos,Igor Peñalva,Jose Miguel Muñoz

DOI: https://doi.org/10.3390/s24216812

IF: 3.9

2024-10-24

Sensors

Abstract:The present study characterizes gamma dose rate (GDR) concentrations in Bilbao, located in the northern Iberian Peninsula, utilizing a comprehensive 10-min interval database spanning from 2009 to 2018. This station belongs to the radiological environmental monitoring of the Basque Country network. The daily average GDR was found to be 0.07624 ± 0.00004 μSv/h, with the daily 95th percentile averaging 0.08026 ± 0.00007 μSv/h throughout the entire period. Our analysis specifically addresses the impact of precipitation on GDR, revealing a higher correlation coefficient for daily 95th percentile values compared to daily averages. Additionally, the influence of the Galerna (GL) event, a natural meteorological phenomenon in this region, on GDR was investigated, noting that it can develop both with and without precipitation. Understanding the interaction between GDR and this meteorological scenario is vital for the development of more reliable radiological monitoring strategies and for safeguarding public health. For this purpose, 40 GL events were analyzed. The present results indicate that GDR values frequently exceed alarm levels when a GL is formed. These GDR peaks should be considered natural radiological events, necessitating the classification of such GDR peaks as false alarms within the radiological monitoring network. To explain them in detail, 10-min time series of precipitation and radon outdoor concentrations were analyzed. The results demonstrate that the GL event with precipitation is a meteorological scenario that can be associated with false alarms. The present analysis provides a distinct contrast in radon behavior under the same meteorological event in case of being developed with precipitation or without precipitation. The findings from this analysis are crucial for avoiding and understanding false radiological alarms triggered in the monitoring network, thereby enhancing the accuracy of radiological data interpretation and improving public safety measures.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Real-time acquisition and correction of temperature effect in NaI(Tl) detector-based environmental gamma radiation detection device

I Putu Susila,Istofa,Sukandar,Budi Santoso

DOI: https://doi.org/10.1088/1742-6596/1436/1/012135

2020-01-01

Journal of Physics: Conference Series

Abstract:Abstract Environmental radiation monitoring especially around nuclear facility is needed to ensure public protection and safety. An online radiation monitoring system which continuously detects the presence of radioactive material in the environmental is important system to quickly detects uncontrolled radioactive released to the air. In this study, a radiation detection device based-on NaI(Tl) scintillation detector as part of an online radiation monitoring system has been developed and tested. During field testing, radiation count rate, and operational condition parameters which are temperature and relative humidity was collected continuously for 3 months. Data was transferred every 10 seconds with average communication delay around 0.57 second. Total number of data points is 733,725 records, and the average count rate was 653.09 cpm (σ = 81.77). Measured temperature is between 18.9 °C and 44.3 °C, while relative humidity is between 19.4 %RH and 78.6 %RH. Experimental result shows that count rate has temperature dependence. Effect of temperature to the count rate was estimated using power equation, and then the equation is used to correct the measurement data. After correction, several peaks which indicates the presence of radioactive material other than background radiation can be identified easily. In the future, further development such as radionuclide identification feature can be added to the prototype.
Long Term Sensing Via Battery Health Adaptation.

Greg Jackson,Zhijin Qin,Julie A. McCann

DOI: https://doi.org/10.1109/icdcs.2017.136

2017-01-01

Abstract:Energy Neutral Operation (ENO) has created the ability to continuously operate wireless sensor networks in areas such as environmental monitoring, hazard detection and industrial IoT applications. Current ENO approaches utilise techniques such as sample rate control, adaptive duty cycling and data reduction methods to balance energy generation, storage and consumption. However, the state of the art approaches makes a strong and unrealistic assumption that battery capacity is fixed throughout the deployment time of an application. This results in scenarios where ENO systems over allocate sensing tasks, therefore as battery capacity degrades it causes the system to no longer be energy neutral and then fail unexpectedly. In this paper, we formulate the problem to maximise the quality-of-service in terms of duty cycle and the battery capacity to extend the deployment lifetime of a sensing application. In addition, we develop a lightweight algorithm to solve the formulated problem. Moreover, we evaluate the proposed method using real sensor energy consumption data captured from micro-climate sensors deployed in Queen Elizabeth Olympic Park, London. Results show that a 307% extension of deployment lifetime can be achieved when compared to a traditional ENO solution without a reduction in the duty cycle of the sensor.
The CELESTA CubeSat In-Flight Radiation Measurements and their Comparison with Ground Facilities Predictions

Andrea Coronetti,Alessandro Zimmaro,Rubén García Alía,Salvatore Danzeca,Alessandro Masi,Ivan Slipukhin,Alessio Amodio,Jasper Dijks,Paul Peronnard,Raffaello Secondo,Markus Brugger,Enrico Chesta,Muriel Bernard,Laurent Dusseau,Tristan Allain,Rafael Mendes Duarte,Jean-Roch Vaillé,Frédéric Saigné,Jerome Boch,Luigi Dilillo

DOI: https://doi.org/10.1109/tns.2024.3376749

IF: 1.703

2024-01-01

IEEE Transactions on Nuclear Science

Abstract:The CELESTA CubeSat has employed radiation monitors developed by the Conseil Europeeene pour la Recherche Nucleaire (CERN), used for measuring the radiation environment at accelerators, to measure the space radiation field in a medium-Earth orbit (MEO). The technology is based on three static random access memories (SRAMs) that are sensitive to single-event upsets (SEUs) and single-event latchups (SELs). The measurements were performed for the duration of 2 months. A statistically significant amount of SEUs and SELs were collected. No solar proton event effects were observed in the data during this period. The in-flight rates were compared with respect to estimations coming from the environmental space fluxes available in the Outil de Modelisation de l’Environmment Radiative Externe (OMERE) tool suite and ground facility measurements done with ions and protons. The analysis emphasizes the importance of employing more sophisticated satellite shielding models for the calculation of the fluxes reaching the detectors as well as the need to know accurately the proton energy threshold of the SEU cross section Weibull response of the devices. Both observations mainly arise from the peculiar spectral distribution of protons in this MEO peaking at 10-20 MeV, which differs from those of a low-Earth orbit environment.

engineering, electrical & electronic,nuclear science & technology
Introducing PLEMS: the application of a low-cost, portable monitoring system in environmental walks

Eduardo Krüger,Walter Ihlenfeld,Ivan Callejas,Solange Leder

DOI: https://doi.org/10.1007/s00484-024-02754-x

2024-08-08

Abstract:The application of innovative systems using low-cost microcontrollers in human biometeorology studies is a promising alternative to conventional monitoring devices, which are usually cost-intensive and provide measurements at specific points, as in stationary meteorological stations. A Portable Low-cost Environmental Monitoring System (PLEMS) aimed at the pedestrian scale is introduced. The backpack-type equipment consists of a microcontroller with attached sensors that assess environmental conditions in a broad sense, integrating measurements of air quality, lighting and noise levels alongside variables typically measured at meteorological stations. The application of the system took place in altogether 12 environmental walks carried out with questionnaire-surveys with concurrent environmental monitoring with the PLEMS in Curitiba, Brazil, a subtropical location characterized by a Cfb climate type. Results allowed us to test the equipment and method of data gathering within a limited period (approximately 50 min) and for a short walking circuit of 800 m. The equipment was successfully able to capture even slightest differences in environmental conditions among points of interest, whereas subjective responses (n= 3843 responses to a total of 11 questions) showed consistency with measured data. From a multi-domain perspective, relevant insights could be obtained for the measured variables.
Performance of the LABDOS01 spectrometer in dosimetric measurements

Silvia Vernetto,Carlo Francesco Vigorito,Martin Kakona,Roman Dvorak,Satoshi Kodaira,Stefano Cirilli,Fabio Romanelli,Daniele Savietto,Alba Zanini

2024-12-02

Abstract:This paper describes the performance of the LABDOS01, a silicon diode-based spectrometer suitable for dose measurements in mixed radiation fields. The instrument is currently being used in two high-altitude environmental dose monitoring projects: SAMADHA (South Atlantic Magnetic Anomaly Dosimetry at High Altitude) at Chacaltaya (Bolivia, 5240 m a.s.l.) and CORDIAL (COsmic Rays Dosimetry In Antarctic Latitudes) at the Concordia station (Antarctica, 3233 m a.s.l.). Before installing two of these devices at the measurement sites, the detectors were tested on flight routes covering a wide range of geomagnetic latitudes. The collected dosimetric data were compared with the expectations derived by the CARI-7A software, which provides the absorbed dose rate in silicon due to cosmic ray secondaries at a given position on the Earth. The measured dose rates along the flights at variable altitude and rigidity cutoff agree well with the simulated ones. By analyzing the spectrum of the energy deposited in the silicon layer, we derive an empirical method to approximately evaluate the ambient dose equivalent $H^{*}(10)$, a quantity directly related to the biological damage caused by environmental radiation.

Instrumentation and Detectors
Data quality monitoring in the presence of aerosols and other adverse atmospheric conditions with H.E.S.S

J. Hahn,R. de los Reyes,K. Bernlöhr,P. Krüger,Y.T.E. Lo,P.M. Chadwick,M.K. Daniel,C. Deil,H. Gast,K. Kosack,V. Marandon

DOI: https://doi.org/10.48550/arXiv.1502.01182

2015-02-04

Abstract:Cherenkov telescope experiments, such as H.E.S.S., have been very successful in astronomical observations in the very-high-energy (VHE; E $>$ 100 GeV) regime. As an integral part of the detector, such experiments use Earth's atmosphere as a calorimeter. For the calibration and energy determination, a standard model atmosphere is assumed. Deviations of the real atmosphere from the model may therefore lead to an energy misreconstruction of primary gamma rays. To guarantee satisfactory data quality with respect to difficult atmospheric conditions, several atmospheric data quality criteria are implemented in the H.E.S.S. software. These quantities are sensitive to clouds and aerosols. Here, the Cherenkov transparency coefficient will be presented. It is a new monitoring quantity that is able to measure long-term changes in the atmospheric transparency. The Cherenkov transparency coefficient derives exclusively from Cherenkov data and is quite hardware-independent. Furthermore, its positive correlation with independent satellite measurements, performed by the Multi-angle Imaging SpectroRadiometer (MISR), will be presented.

Instrumentation and Methods for Astrophysics
Field Test of the MiniRadMeter Gamma and Neutron Detector for the EU Project CLEANDEM

Ripani,Rossi,Cosentino,Longhitano,Musico,Osipenko,Poma,Finocchiaro

DOI: https://doi.org/10.3390/s24185905

IF: 3.9

2024-09-12

Sensors

Abstract:In the framework of the H2020 CLEANDEM project, a small robotic vehicle was equipped with a series of different sensors that were developed for the preliminary inspection of areas possibly contaminated by radiation. Such unmanned inspection allows to identify dangerous locations prior to the possible start of human operations. One of the developed devices, named the MiniRadMeter, is a compact low-cost sensor that performs gamma and neutron radiation field mapping in the environment. The MiniRadMeter was successfully tested in a simulated field mission with four "hidden" radioactive sources and a neutron generator. In this work, we describe the test procedure and the results, which were supported by the outcome of dedicated Monte Carlo simulations.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Feasibility of low-cost particulate matter sensors for long-term environmental monitoring: Field evaluation and calibration

Zikang Feng,Lina Zheng,Bilin Ren,Dou Liu,Jing Huang,Ning Xue

DOI: https://doi.org/10.1016/j.scitotenv.2024.174089

2024-10-01

Abstract:Low-cost sensor networks offer the potential to reduce monitoring costs while providing high-resolution spatiotemporal data on pollutant levels. However, these sensors come with limitations, and many aspects of their field performance remain underexplored. During October to December 2023, this study deployed two identical low-cost sensor systems near an urban standard monitoring station to record PM2.5 and PM10 concentrations, along with environmental temperature and humidity. Our evaluation of the monitoring performance of these sensors revealed a broad data distribution with a systematic overestimation; this overestimation was more pronounced in PM10 readings. The sensors showed good consistency (R2 > 0.9, NRMSE<5 %), and normalization residuals were tracked to assess stability, which, despite occasional environmental influences, remained generally stable. A lateral comparison of four calibration models (MLR, SVR, RF, XGBoost) demonstrated superior performance of RF and XGBoost over others, particularly with RF showing enhanced effectiveness on the test set. SHAP analysis identified sensor readings as the most critical variable, underscoring their pivotal role in predictive modeling. Relative humidity consistently proved more significant than dew point and temperature, with higher RH levels typically having a positive impact on model outputs. The study indicates that, with appropriate calibration, sensors can supplement the sparse networks of regulatory-grade instruments, enabling dense neighborhood-scale monitoring and a better understanding of temporal air quality trends.
RADON EXHALATION FROM SOIL AND ITS DEPENDENCE FROM ENVIRONMENTAL PARAMETERS

Jinmin Yang,Maximilian Buchsteiner,Josef Salvamoser,Josef Irlinger,Qiuju Guo,Jochen Tschiersch

DOI: https://doi.org/10.1093/rpd/ncx165

2017-11-01

Abstract:An automatic measuring apparatus called exhalometer for measurement of the radon exhalation rate from soil is introduced. It consists of a pneumatic driven accumulation chamber with an open bottom, a PC-based control system, six Lucas cells for radon measurement and sensors for environmental parameters. It allows moving the accumulation chamber and hereby opening or closing it. The exhalation rate is determined through the increase of radon in the accumulation chamber. For studying exhalation and the affecting factors, the exhalometer was placed at an undisturbed meadow for the entire year of 2015. The daily radon exhalation rate ranges from 2.5 to 50.7 Bq m-2 h-1 with an average of 25.3 Bq m-2 h-1. The exhalation rate shows daily and seasonal variations with its maximum in the afternoon and in spring. The dependence on several environmental parameters is discussed. The stable performance indicates the system's fitness for long-term measurements.
Improving Operational Performance using Machine Learning Analysis of Radiation Portal Monitor Measurements

Simon E. Labov,Karl E. Nelson,Caleb M. Mattoon,Noah J. McFerran,Minh H. Pham,Lisa Her,Jan S. Brzosko,Saswati Ray,Dan Howarth,Artur W. Dubrawski

DOI: https://doi.org/10.1016/j.nima.2024.170123

2024-11-30

Abstract:Radiation Portal Monitors (RPMs) have been installed worldwide to scan vehicles and cargo for the presence of radiological and nuclear materials. In field operations, the sensitivity of these systems is typically limited by the relatively high rates of nuisance alarms that usually must be followed up with secondary inspections. We have developed a machine-learning based alarm analysis system that has been deployed at numerous locations in the U.S. and internationally. Our Enhanced Radiological Nuclear Inspection and Evaluation (ERNIE) analysis software and its derivatives have demonstrated increased sensitivity to radiological and nuclear material of concern while reducing nuisance alarms by as much as an order of magnitude.

physics, particles & fields, nuclear,nuclear science & technology,instruments & instrumentation

Performance of data acceptance criteria over 50 months from an automatic real-time environmental radiation surveillance network.

RE SEARCH ON EN ERGY SPEC TRUM ANOM ALY DE TEC TION METHOD FOR STATE CON TROL RA DI A TION EN VI RON MEN TAL MON I TOR ING BASED ON LOF AL GO RITHM

A 291-day Evaluation of the Performance of a Consumer-grade Temporal Radon Detector

Long-term field studies of a distributed network of sensors for environmental radiological monitoring

Investigation of the Performance of Various Low-Cost Radon Monitors under Variable Environmental Conditions

Improving Data Quality of Low-Cost Light-Scattering PM Sensors: Toward Automatic Air Quality Monitoring in Urban Environments

Long term Experience in Autonomous Stations and production quality control

Method validation and quality assurance of an ICP-MS protocol for the evaluation of trace and major elements in ambient aerosol samples and application to an air quality surveillance network

Long term measurement of the $^{222}$Rn concentration in the Canfranc Underground Laboratory

Long-term comparison and performance study of consumer grade electronic radon integrating monitors

Gamma Dose Rate Measurements in Northern Spain: Influence of Local Meteorological Scenarios on Radiological "False Alarms" in a Real-Time Radiological Monitoring Network

Real-time acquisition and correction of temperature effect in NaI(Tl) detector-based environmental gamma radiation detection device

Long Term Sensing Via Battery Health Adaptation.

The CELESTA CubeSat In-Flight Radiation Measurements and their Comparison with Ground Facilities Predictions

Introducing PLEMS: the application of a low-cost, portable monitoring system in environmental walks

Performance of the LABDOS01 spectrometer in dosimetric measurements

Data quality monitoring in the presence of aerosols and other adverse atmospheric conditions with H.E.S.S

Field Test of the MiniRadMeter Gamma and Neutron Detector for the EU Project CLEANDEM

Feasibility of low-cost particulate matter sensors for long-term environmental monitoring: Field evaluation and calibration

RADON EXHALATION FROM SOIL AND ITS DEPENDENCE FROM ENVIRONMENTAL PARAMETERS

Improving Operational Performance using Machine Learning Analysis of Radiation Portal Monitor Measurements