Impact of food grade and nano-TiO2 particles on a human intestinal community.

W. Dudefoi,Kristy Moniz,E. Allen-Vercoe,M. Ropers,V. Walker

DOI: https://doi.org/10.1016/j.fct.2017.05.050

IF: 4.3

2017-08-01

Food and Chemical Toxicology

Abstract:

What problem does this paper attempt to address?

Multi Time Scale Inception-Time Network for Soft Sensor of Blast Furnace Ironmaking Process

Yanrui Li,Chunjie Yang

DOI: https://doi.org/10.1016/j.jprocont.2022.08.003

IF: 3.951

2022-01-01

Journal of Process Control

Abstract:Time series(TS) forecasting has been widely applied in many fields and industrial soft sensor is one of them. Most time series modeling methods require that all inputs are sampled at equal intervals. However, in industry, the process variables are often sampled on different time scales with varying intervals. To address this problem, in this paper, we designed a framework using deep learning with time representation techniques to model the long temporal industrial data with multiple sampling frequency. Data are aggregated into different time scale by time representation and the network extracts the information on both temporal and spatial dimensions simultaneously using the bottleneck layer and one-dimensional filter. The proposed model has a significant improvement compared with other methods and has been deployed in the factory and updated every month.
Forecasting Price Trend of Bulk Commodities Leveraging Cross-domain Open Data Fusion.

Binbin Zhou,Sha Zhao,Longbiao Chen,Shijian Li,Zhaohui Wu,Gang Pan

DOI: https://doi.org/10.1145/3354287

IF: 5

2020-01-01

ACM Transactions on Intelligent Systems and Technology

Abstract:Forecasting price trend of bulk commodities is important in international trade, not only for markets participants to schedule production and marketing plans but also for government administrators to adjust policies. Previous studies cannot support accurate fine-grained short-term prediction, since they mainly focus on coarse-grained long-term prediction using historical data. Recently, cross-domain open data provides possibilities to conduct fine-grained price forecasting, since they can be leveraged to extract various direct and indirect factors of the price. In this article, we predict the price trend over upcoming days, by leveraging cross-domain open data fusion. More specifically, we formulate the price trend into three classes (rise, slight-change, and fall), and then we predict the specific class in which the price trend of the future day lies. We take three factors into consideration: (1) supply factor considering sources providing bulk commodities, (2) demand factor focusing on vessel transportation with reflection of short time needs, and (3) expectation factor encompassing indirect features (e.g., air quality) with latent influences. A hybrid classification framework is proposed for the price trend forecasting. Evaluation conducted on nine real-world cross-domain open datasets shows that our framework can forecast the price trend accurately, outperforming multiple state-of-the-art baselines.
Intelligent decision-making system for mineral processing production indices based on digital twin interactive visualization

Kesheng Zhang,Quan Xu,Changxin Liu,Tianyou Chai,Zhang, Kesheng

DOI: https://doi.org/10.1007/s12650-024-00964-4

IF: 1.7

2024-03-29

Journal of Visualization

Abstract:The multi-layer indices decision-making of complex industrial processes is the key to reducing costs and improving production efficiency. With the development of the Industrial Internet, a large number of industrial streaming data and intelligent algorithms have brought opportunities for optimizing plant-wide production indices. However, due to the strong dynamic and coupling of the production process, the intelligent system based only on the optimization algorithm cannot give practical data analysis suggestions and decision results, so a human–computer interactive visual analysis and index decision system are urgently needed. This paper combines multi-layer indices decision-making algorithms with 3D digital twin visual analysis technology to propose an intelligent decision-making system for mineral processing production indices based on 3D digital twin interactive visualization (DTIV). The DTIV system provides users a 3D digital twin modeling view from the production park, workshop, and equipment scenes. It adopts visualization technology that seamlessly integrates 3D and 2D to help users obtain indices decision input information and hidden data features from real-time stream data with different spatiotemporal data characteristics. In addition, the DTIV system also combines a multi-layer indices optimization decision-making algorithms engine and designs a human–machine interaction indices decision interface and indices decision execution visual analysis interface to improve users' production perception and decision-making ability. Through our collaboration with domain experts, carefully designed interviews, and prototype system evaluation in a beneficiation plant, the effectiveness and usability of the system have been proven.

computer science, interdisciplinary applications,imaging science & photographic technology
Dynamic Time Features Expanding and Extracting Method for Prediction Model of Sintering Process Quality Index

Yuxuan Li,Chunjie Yang,Youxian Sun

DOI: https://doi.org/10.1109/tii.2021.3086763

IF: 12.3

2021-01-01

IEEE Transactions on Industrial Informatics

Abstract:In complex industrial processes, it is difficult to measure the key quality variables online. It takes a long time to obtain quality variables through offline testing, which makes it difficult to get timely information to guide the production process. Therefore, this article proposes a novel dynamic time feature expanding and extracting framework for the sinter quality prediction. First, the original data are differentiated, compensated for time delay, expanded, and serialized by using time characteristics, and the input time series is reconstructed. Second, the integrated time features extractor is used to obtain the process information. Then, the recurrent neural network regression is applied to obtain the prediction of key quality variables. Finally, the effectiveness of the proposed method is verified by a numerical example, the actual data of sintering process and various comparative experiments, and the prediction effect of FeO content in sintering process is improved.
Deep learning-based dynamic forecasting method and application for ultra-deep fractured reservoir production

Ziyan Deng,Dongsheng Zhou,Zhijiang Kang,Hezheng Dong

DOI: https://doi.org/10.3389/fenrg.2024.1369606

IF: 3.4

2024-03-09

Frontiers in Energy Research

Abstract:Addressing the complex challenges in dynamic production forecasting for the deep-ultra-deep fractured carbonate reservoirs in the Tarim Basin's Tahe Oilfield, characterized by numerous influencing factors, strong temporal variations, high non-linearity, and prediction difficulties, We proposes a prediction method based on Gated Recurrent Unit networks (GRU). Initially, the production data and influencing factors are subjected to dimensionality reduction using Pearson correlation coefficient and principal component analysis methods to obtain multi-attribute time series data. Subsequently, deep learning modeling of time series data is conducted using Gated Recurrent Unit networks. The model is then optimized using the Optuna algorithm and applied to the dynamic production forecasting of the deep-ultra-deep fractured carbonate reservoirs in the Tahe Oilfield. The results demonstrate that the Gated Recurrent Unit network model optimized by Optuna excels in the dynamic production forecasting of the Tahe fractured carbonate reservoirs. Compared with the traditional method, the mean absolute error (MAE), the root mean square error (MSE) and the mean absolute percentage error (MAPE) are reduced by 0.04, 0.1 and 1.1, respectively. This method proves to be more adaptable to the production forecasting challenges of deep fractured reservoirs, providing an effective means to enhance model performance. It holds significant practical value and importance in guiding the development of fractured reservoirs.

energy & fuels
Microtubule bundles of Reticulomyxa networks are of uniform polarity.

U. Euteneuer,L. Haimo,M. Schliwa

IF: 6.02

1989-08-01

European Journal of Cell Biology

Abstract:
Frame-Dilated Convolutional Fusion Network and GRU-Based Self-Attention Dual-Channel Network for Soft-Sensor Modeling of Industrial Process Quality Indexes

Jinping Liu,Jiezhou He,Zhaohui Tang,Yongfang Xie,Weihua Gui,Tianyu Ma,Hadi Jahanshahi,Ayman A. Aly

DOI: https://doi.org/10.1109/tsmc.2021.3130232

2021-01-01

IEEE Transactions on Systems, Man, and Cybernetics: Systems

Abstract:Due to technical or economic limitations, timely measuring quality-relevant key performance indicators (KPIs) of complex industrial processes (CIPs), especially the chemical composition-related indexes, is intractable. Process monitoring image sequences (PMISs) usually involve significant information about the operation states and KPIs. Thus, soft sensor-based online KPI inference by incorporating process monitoring variables (TPMVs) and PMISs is more promising. However, the extremely inconsistent sampling rates with different expression forms and concerning aspects between PMISs and TPMVs lead to a great challenge in the soft sensor modeling by combining PMISs and TPMVs. In this article, a self-attention dual-channel deep network (SADCDN)-based soft sensor model for the end-to-end online KPI detection/prediction is proposed. Specifically, one channel adopts the gated recurrent unit (GRU) network to extract intrinsic time-series features in TPMVs, and simultaneously the other channel introduces a novel frame-dilated convolution fusion neural network (FDCFNN) to extract intrinsic spatiotemporal features from PMISs to address the sampling inconsistence between PMISs and TPMVs. Successively, dual-channel network features with different concerning aspects are weighted and fused based on an introduced self-attention mechanism to bridge the gap of sampling rates and concerning aspects between PMISs and TPMVs for the soft sensor modeling. Practical application results on two real industrial processes, the bauxite flotation process and the sintering process of a cement rotary kiln, have demonstrated the effectiveness and superiority of the proposed dual-channel model, laying a foundation for the process optimization of CIPs.
Cloud–Edge-Based Lightweight Temporal Convolutional Networks for Remaining Useful Life Prediction in IIoT

Lei Ren,Yuxin Liu,Xiaokang Wang,Jinhu Lu,M. Jamal Deen

DOI: https://doi.org/10.1109/jiot.2020.3008170

IF: 10.6

2021-01-01

IEEE Internet of Things Journal

Abstract:Industrial Internet of Things (IIoT), as an important industrial branch of the Internet of Things (IoT), has an essential purpose to improve intelligent industrial production. For this purpose, IIoT big data should be efficiently processed to mine valuable information. In handing the IIoT big data, cloud-edge computing is getting more attention to reduce the interaction latency to meet the real-time requirement, especially in the field of prognostic and health management (PHM). It is expected that artificial intelligence (AI) technologies will significantly change the manner of processing IIoT big data. Therefore, new methods about PHM, combining cloud-edge computing with AI technologies, are required to process the IIoT big data for intelligent industrial manufacturing. As an essential element of PHM, predicting the remaining useful life (RUL) of industrial equipment plays an increasingly crucial role, especially for industrial intelligence. However, traditional methods pay much attention on prediction accuracy and neglect the influence of computing time. In this article, by combining cloud-edge computing with AI technology, a new data-driven method, namely, cloud-edge-based lightweight temporal convolutional networks (LTCNs), for RUL prediction is proposed. First, to meet the real-time requirement, a cloud-edge computing and AI-based framework for RUL prediction is presented. Second, a new model structure named LTCN is proposed and applied in the framework. Real-time prediction results will be obtained in the edge plane and higher accuracy prediction results will be obtained through historical information in the cloud plane. Third, an incremental learning approach based on updating partial parameters of LTCN is discussed to improve the accuracy of prediction models with newly collected data. Experiments show that our method can improve the prediction accuracy and reduce the computational time of RUL.
Efficient decentralized optimization for edge-enabled smart manufacturing: A federated learning-based framework

Huan Liu,Shiyong Li,Wenzhe Li,Wei Sun

DOI: https://doi.org/10.1016/j.future.2024.03.043

IF: 7.307

2024-03-31

Future Generation Computer Systems

Abstract:The volume of industrial data of smart manufacturing is growing rapidly. Edge computing has emerged as an advanced technique that provides scalable resources for Industrial Internet of Things (IIoT) devices to analyze industrial data and enhance productivity. However, real-time and privacy-protecting data services are crucial for comprehensive decision-making, particularly utilizing machine learning in edge-enabled smart manufacturing. Therefore, how to optimize efficiently the data processing has become a critical concern for manufacturers seeking to upgrade the overall manufacturing operations. In this paper, we propose a decentralized federated learning-based framework to ensure the processing of industrial data in a low-latency and secure manner. Our solution designs the combination between edge nodes and IIoT devices as a global consensus problem with equilibrium constraints. Moreover, we adopt the distributed Alternating Direction Method of Multipliers (ADMM) algorithm to optimize the proposed data processing model, considering its advantages of decomposability and parallelism. To flexibly handle various types of industrial data, such as low-rank and high-dimensional data, we present two types of inexact ADMM algorithms to provide efficient model training services, respectively. Furthermore, an integrated optimization flow is designed for data processing in edge-enabled smart manufacturing. Finally, using industrial datasets from a thermal power plant for steam prediction case, we show that the presented inexact algorithms can decrease the response time by up to 17.2% and 58% compared to other existing algorithms, respectively, while achieving the comparable level of statistical accuracy.

computer science, theory & methods
Distributed deep learning enabled prediction on cutting tool wear and remaining useful life

Weidong Li,Xiaoyang Zhang,Sheng Wang,Xin Lu,Zhiwen Huang

DOI: https://doi.org/10.1177/09544054221148776

2023-01-12

Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. To optimise the utilisation cost of cutting tools, it is imperative to develop an online system to efficiently and accurately predict tool wear conditions and remaining useful lives (RULs). With this aim, a novel system is proposed based on deep learning algorithms distributed over an edge-cloud computing architecture. The system is innovative in the following aspects: (i) a lightweight convolutional neural network-random forest (CNN-RF) model is designed to be executed on an edge device to assess tool wear conditions efficiently, which supports severe tool resilience and tool replacement when necessary; (ii) a convolutional neural network-long short-term memory (CNN-LSTM) model is designed to be executed on a cloud to process long-term signals to predict the RUL of the cutting tool, which supports fine-tuning tool parameters dynamically; (iii) a signal compression mechanism is developed to condense the signals of tooling conditions into 2D images so the signal volumes transferred over the network are minimised and signal security is improved. Experiments were performed in a real-world machining workshop for research methodology validation. It showed that the prediction accuracies for tool wear and RUL achieved 90.6% and 93.2%, respectively, and the volume of signals transferred over the network was reduced by 89.0%. The experiments and benchmarks with comparative algorithms demonstrated that the system and its methodology exhibited great potential to reinforce cutting tool optimisation for real-world applications.

engineering, mechanical, manufacturing
A novel parallel feature extraction-based multibatch process quality prediction method with application to a hot rolling mill process

Kai Zhang,Xiaowen Zhang,Kaixiang Peng

DOI: https://doi.org/10.1016/j.jprocont.2024.103166

IF: 3.951

2024-01-27

Journal of Process Control

Abstract:In a hot strip rolling mill (HSRM) process, the prediction of the steel crown is a key factor in improving the quality of the strip steel. In this paper, a new multibatch feature extraction-based method is proposed for predicting the steel crown. Different from the cascaded feature extraction-based method which cannot extract both temporal and local features well, this method parallelly captures the feature between different batches of data using a method based on the multi-channel convolution neural network (MCNN) and long short-term memory (LSTM). The feature extraction is performed in parallel by an LSTM layer fusing variable attention and temporal attention, and a Multi-channel convolutional neural network fusing channel attention and spatial attention, which are used to extract temporal and local features of the input variables, respectively. Then, an LSTM-based fusion layer is used to incorporate both features for the development of the prediction model. The proposed method is applied to a cloud–edge-end collaborative prototype system, where the actual HSRM data is integrated. Based on the fact that an HSRM process commonly runs with the steel header crown data for the model update, an adaptive prediction method is also developed and deployed in the prototype system. It can be seen from the model complexity analysis and application results that the prediction performance improves by 42.70% compared with the cascaded feature extraction-based method, and the adaptive method can ensure a realtime prediction realization.

automation & control systems,engineering, chemical
To Transmit or Predict: an Efficient Industrial Data Transmission Scheme with Deep Learning and Cloud-Edge Collaboration

Yu Wu,Bo Yang,Dafeng Zhu,Qi Liu,Cheng Li,Cailian Chen,Xinping Guan

DOI: https://doi.org/10.1109/tii.2023.3245673

IF: 12.3

2023-01-01

IEEE Transactions on Industrial Informatics

Abstract:Many computation-intensive industrial applications need to be run in the cloud, which relies on a lot of sharply varying data transmitted from the industrial field. To save the communication bandwidth and ensure data with required accuracy obtained by the cloud, we design a data transmission architecture based on dual prediction scheme and cloud-edge collaboration and a dual-mode algorithm based on deep learning. With the proposed architecture, a deep learning model is deployed and synchronized on the edge and cloud sides. Further, the proposed algorithm can help the cloud for computation with locally predicted data or real-time data from the edge, depending on whether the predicted data are adequately accurate. A physical validation platform including a sensor, an edge gateway, and a cloud server is built, and drastically changing real vibration data are collected to validate the proposed scheme. The results show that the proposed scheme can reduce 88.66% of data transmission while guaranteeing deviations less than 0.1.
Remaining useful life prediction based on parallel multi-scale feature fusion network

Yuyan Yin,Jie Tian,Xinfeng Liu

DOI: https://doi.org/10.1007/s10845-024-02399-y

IF: 8.3

2024-05-10

Journal of Intelligent Manufacturing

Abstract:In the domain of Predictive Health Management (PHM), the prediction of Remaining Useful Life (RUL) is pivotal for averting machinery malfunctions and curtailing maintenance expenditures. Currently, most RUL prediction methods overlook the correlation between local and global information, which may lead to the loss of important features and, consequently, a subsequent decline in predictive precision. To address these limitations, this study presents a groundbreaking deep learning framework termed the Parallel Multi-Scale Feature Fusion Network (PM2FN). This approach leverages the advantages of different network structures by constructing two distinct feature extractors to capture both global and local information, thereby providing a more comprehensive feature set for RUL prediction. Experimental results on two publicly available datasets and a real-world dataset demonstrate the superiority and effectiveness of our method, offering a promising solution for industrial RUL prediction.

engineering, manufacturing,computer science, artificial intelligence
Local-feature and global-dependency based tool wear prediction using deep learning

Changsen Yang,Jingtao Zhou,Enming Li,Mingwei Wang,Ting Jin

DOI: https://doi.org/10.1038/s41598-022-18235-3

IF: 4.6

2022-08-27

Scientific Reports

Abstract:Evaluation of tool wear is vital in manufacturing system, since early detections on worn-out condition can ensure workpiece quality, improve machining efficiency. With the development of intelligent manufacturing, tool wear prediction technology plays an increasingly important role. However, traditional tool wear prediction methods rely on experience and knowledge of experts and are labor-extensive. Deep learning provides an effective way to extract features of raw data and establish the mapping relationship between features and targets automatically. In this paper, a new local-feature and global-dependency based tool wear prediction method is proposed. It is a hybrid approach combining manual features with automatic features. Firstly, an enhanced CNN network is designed and applied on the transformed wavelet scalogram to learn the local single-scale specific features and multi-scale correlation features automatically. Secondly, sequence of local feature vectors combining manual features with automatic features are fed into multi-layer LSTM step by step for the global dependency. A fully connected layer is then trained to predict tool wear. Finally, two statistics are proposed to illustrate the overall prediction performance and generalization ability of the model. An experiment illustrates the effectiveness of our proposed method under multiple working conditions.

multidisciplinary sciences
Tool Wear Prediction Based on Edge Data Processing and Deep Learning Model

Dong Yan,Xinyu Ding,Shuaiyu Pan,Haoyang Huang

DOI: https://doi.org/10.1088/1742-6596/1820/1/012165

2021-03-01

Journal of Physics: Conference Series

Abstract:Abstract In order to improve the accuracy of tool wear prediction and enhance the real-time application in industrial sites, a tool wear prediction method based on edge data processing and CNN-BiGRU neural network is proposed. This method first implements data preprocessing on edge nodes, effectively reducing the amount of data transmission to avoid network link congestion. After that, the CNN-BiGRU neural network was deployed in the cloud for model training. Experimental results show that the tool wear prediction method based on edge data processing and CNN-BiGRU neural network has good real-time performance and high prediction accuracy in simulated industrial field applications.
Coalbed methane concentration prediction and early-warning in fully mechanized mining face based on deep learning

Hu Wen,Li Yan,Yongfei Jin,Zhipeng Wang,Jun Guo,Jun Deng

DOI: https://doi.org/10.1016/j.energy.2022.126208

IF: 9

2022-11-28

Energy

Abstract:Coalbed methane (CBM) disasters are a major safety problem in coal mining. CBM concentration prediction and early-warning technology play a vital role in the prevention and control of CBM disasters. Traditional prediction methods have some shortcomings such as unreasonable data analysis, inability to predict in real time, long prediction time, and overfitting. This study uses a large amount of coal mine CBM data and develops a fast and high-precision CBM concentration prediction method based on deep learning theory, which can be used for CBM disaster early-warning. The proposed method has the following advantages: (1) it combines three exponential smoothing methods, the autoregressive model, wavelet domain denoising method, and principal component analysis. This method optimizes data with outliers, missing values, and noise. (2) Particle swarm optimization and genetic algorithm are used to optimize the network parameters of the gated recurrent unit. The application and verification of the optimized model show that the running time and accuracy are significantly improved. (3) By combining the optimized prediction model with Spark streaming, an early-warning system is developed, which can complete the efficient early-warning of CBM concentration within 8 s. The proposed method provides decision-making support for mine safety and CBM disaster prevention and control.

energy & fuels,thermodynamics
A Stock Prediction Method Based on Multidimensional and Multilevel Feature Dynamic Fusion

Yuxin Dong,Yongtao Hao

DOI: https://doi.org/10.3390/electronics13204111

IF: 2.9

2024-10-19

Electronics

Abstract:Stock price prediction has long been a topic of interest in academia and the financial industry. Numerous factors influence stock prices, such as a company's performance, industry development, national policies, and other macroeconomic factors. These factors are challenging to quantify, making predicting stock price movements difficult. This paper presents a novel deep neural network framework that leverages the dynamic fusion of multi-dimensional and multi-level features for stock price prediction, which means we utilize fundamental trading data and technical indicators as multi-dimensional data and local and global multi-level information. Firstly, the model dynamically assigns weights to multi-dimensional features of stocks to capture the impact of each feature on stock prices. Next, it applies the Fourier transform to the global features to capture the long-term trends of the global environment and dynamically fuses these with local and global features of the stocks to capture the overall market environment's impact on individual stocks. Finally, temporal features are captured using an attention layer and an RNN-based model, which incorporates historical price data to forecast future prices. Experiments on stocks from various industries within the Chinese CSI 300 index reveal that the proposed model outperforms traditional methods and other deep learning approaches in terms of stock price prediction. This paper proposes a method that facilitates the dynamic integration of multi-dimensional and multi-level features in an efficient manner and experimental results show that it improves the accuracy of stock price predictions.

engineering, electrical & electronic,computer science, information systems,physics, applied
A Deep Learning-Based Approach for High-Dimensional Industrial Steam Consumption Prediction to Enhance Sustainability Management

Shenglin Liu,Yuqing Xiang,Huijie Zhou

DOI: https://doi.org/10.3390/su16229631

IF: 3.9

2024-11-06

Sustainability

Abstract:The continuous increase in industrialized sustainable development and energy demand, particularly in the use of steam, highlights the critical importance of efficient energy forecasting for sustainability. While current deep learning models have proven effective, they often involve numerous hyperparameters that are challenging to control and optimize. To address these issues, this research presents an innovative deep learning model, automatically fine-tuned using an improved RIME optimization algorithm (IRIME), with the aim of enhancing accuracy in energy forecasting. Initially, the bidirectional gated recurrent unit (BiGRU) exhibited promising results in prediction tasks but encountered difficulties in handling the complexity of high-dimensional time-series data related to industrial steam. To overcome this limitation, a bidirectional temporal convolutional network (BiTCN) was introduced to more effectively capture long-term dependencies. Additionally, the integration of a multi-head self-attention (MSA) mechanism enabled the model to more accurately identify and predict key features within the data. The IRIME-BiTCN-BiGRU-MSA model achieved outstanding predictive performance, with an R2 of 0.87966, MAE of 0.25114, RMSE of 0.34127, and MAPE of 1.2178, outperforming several advanced forecasting methods. Although the model is computationally complex, its high precision and potential for automation offer a promising tool for high-precision forecasting of industrial steam emissions. This development supports broader objectives of enhancing energy efficiency and sustainability in industrial processes.

environmental sciences,environmental studies,green & sustainable science & technology
An enhanced prediction framework for coalbed methane production incorporating deep learning and transfer learning

Shuyi Du,Meizhu Wang,Jiaosheng Yang,Yang Zhao,Jiulong Wang,Ming Yue,Chiyu Xie,Hongqing Song

DOI: https://doi.org/10.1016/j.energy.2023.128877

IF: 9

2023-11-01

Energy

Abstract:Coalbed methane (CBM) is one of the most promising clean energy sources, and its production forecast is of vital strategic significance for the sustainable development. Traditional numerical simulation encounters the curse of dimensionality when applied to multi-scale reservoir modeling. Conventional machine learning faces challenges in modeling under small-sample condition. This study leverages a bidirectional long short-term memory (Bi-LSTM) to better capture the complex dynamic data characteristics of CBM. Moreover, we incorporate transfer learning to generalize the implicit laws learned from 1205 vertical wells to the modeling of horizontal wells, establishing an enhanced prediction framework that can be adapted to different well types. The findings confirm that Bi-LSTM has more powerful memory capability for CBM dynamic data with prediction errors below 200 m³, which can improve the prediction accuracy by about 15% compared to the traditional methods. The fusion of transfer learning can significantly enhance the prediction performance by approximately 10% for both low-producing, medium-producing, and high-producing horizontal wells, illustrating that the dynamic data of vertical wells located in the same block contain implicit features that are crucial guides to the modeling of horizontal wells. Notably, the enhanced architecture exhibits greater flexibility and adaptability under small-sample condition for complex production patterns.

energy & fuels,thermodynamics
A new approach for quality prediction and control of multistage production and manufacturing process based on Big Data analysis and Neural Networks

S. Tian,Z. Zhang,X. Xie,C. Yu

DOI: https://doi.org/10.14743/apem2022.3.439

2022-09-30

Advances in Production Engineering & Management

Abstract:As consumers care more and more about product quality, it is important to mine the deep correlations between production and manufacturing parameters and the evaluation of product quality through the analysis of industrial big data. The existing research of product quality prediction faces several major problems: the lack of diverse quality features, the poor tractability of abnormal parameters, the strong nonlinearity of parameters, the obvious sequential property of data, and the severe time lag of data. To solve these problems, this paper explores the quality prediction and control of multistage MP process (MPMP) based on big data analysis. Firstly, the prediction strategy and flow were specified for MPMP product quality prediction, and the features were extracted from MPMP product quality. After that, the MPMP product quality features were described in multiple dimensions, the attention mechanism was introduced to the prediction process. In addition, the recurrent neural network was improved, and an MPMP product quality prediction model was established on bidirectional long short-term memory (BiLSTM) network. Our model was compared with AdaBoost and XGBoost through experiments. The effectiveness of our model was demonstrated by the results of the appearance quality PQ1, and the area under the curve (AUC) for each process parameter. In general, our model is superior to other algorithms in the accuracy, mean accuracy, and precision of product quality prediction.

engineering, manufacturing,materials science, multidisciplinary

Impact of food grade and nano-TiO2 particles on a human intestinal community.

Multi Time Scale Inception-Time Network for Soft Sensor of Blast Furnace Ironmaking Process

Forecasting Price Trend of Bulk Commodities Leveraging Cross-domain Open Data Fusion.

Intelligent decision-making system for mineral processing production indices based on digital twin interactive visualization

Dynamic Time Features Expanding and Extracting Method for Prediction Model of Sintering Process Quality Index

Deep learning-based dynamic forecasting method and application for ultra-deep fractured reservoir production

Microtubule bundles of Reticulomyxa networks are of uniform polarity.

Frame-Dilated Convolutional Fusion Network and GRU-Based Self-Attention Dual-Channel Network for Soft-Sensor Modeling of Industrial Process Quality Indexes

Cloud–Edge-Based Lightweight Temporal Convolutional Networks for Remaining Useful Life Prediction in IIoT

Efficient decentralized optimization for edge-enabled smart manufacturing: A federated learning-based framework

Distributed deep learning enabled prediction on cutting tool wear and remaining useful life

A novel parallel feature extraction-based multibatch process quality prediction method with application to a hot rolling mill process

To Transmit or Predict: an Efficient Industrial Data Transmission Scheme with Deep Learning and Cloud-Edge Collaboration

Remaining useful life prediction based on parallel multi-scale feature fusion network

Local-feature and global-dependency based tool wear prediction using deep learning

Tool Wear Prediction Based on Edge Data Processing and Deep Learning Model

Coalbed methane concentration prediction and early-warning in fully mechanized mining face based on deep learning

A Stock Prediction Method Based on Multidimensional and Multilevel Feature Dynamic Fusion

A Deep Learning-Based Approach for High-Dimensional Industrial Steam Consumption Prediction to Enhance Sustainability Management

An enhanced prediction framework for coalbed methane production incorporating deep learning and transfer learning

A new approach for quality prediction and control of multistage production and manufacturing process based on Big Data analysis and Neural Networks