Crystallinity in Large-Bandgap Polymer Donors Directs Charge Transportation and Recombination in Efficient Nonfullerene Polymer Solar Cells
Jiaji Zhao,Qingduan Li,Shengjian Liu,Zhixiong Cao,Xuechen Jiao,Yue-Peng Cai,Fei Huang
2020-01-01
Abstract:Solution-processed nonfullerene bulk-heterojunction (BHJ) polymer solar cells (PSCs), which are composed of polymer donors and organic acceptors, are proven to manifest promising performance and long-term stability. In this concise contribution, bithieno[3,4-c]pyrrole-4,6-dione (BiTPD), which is a TPD derivative but presents a large planar structure and strong electron-withdrawing ability, was used to construct a large-bandgap polymer donor PBiTPD. Results show that the polymer donor PBiTPD realized power conversion efficiency (PCE) as high as 14.2% in fullerene-free BHJ solar cells. Larger ionization potential value, more favorable face-on backbone orientation, and stronger crystallinity were concurrently obtained in PBiTPD. Correspondingly, improved and more balanced charge transportation; less nongeminate and trap-assisted recombination losses; and thus high fill factor (FF) of 67%, short-circuit current density (JSC) of 25.6 mA·cm−2, and high open-circuit voltage (VOC) of 0.83 V were concurrently achieved in PBiTPD-based devices. PBiTPD does clear the way for a novel and promising class of large-bandgap polymer donor candidates. With recently achieved power conversion efficiency (PCE) of >16% and lifetime of >10 years, solution-processed nonfullerene bulk-heterojunction (BHJ) polymer solar cells (PSCs), consisting of smallmolecule acceptors and polymer donors, as well as all-polymer solar cells, are very promising alternatives to the more studied fullerene (e.g., PC60BM, PC70BM) acceptor-based PSCs. As an alternative to fullerene-based PSCs, nonfullerene BHJ PSCs possess some practical advantages, spanning complementary optical absorption between the donor and acceptor counterparts and straightforward design of their photoelectronic properties through the chemical structure modification. Thus, considerable efforts, including novel donor and acceptor materials design, meticulous BHJ morphology optimization, novel device architecture, in tandem with effective electrode interlayers, have been made in the development of nonfullerene PSCs. In principle, the complementary absorption and broad absorption band of the BHJ active layer are a substantial benefit for enhancing photon absorption and exciton generation to increase short-circuit current density (JSC) of BHJ solar cells. To date, most of the efficient smallmolecule acceptors are 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(4-hexylphenyl)dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]-dithiophene (ITIC) and its analogues (IEICO, Y6, chlorinated or fluorinated ITIC, etc.) with strong optical absorption in the near-infrared (NIR) range of 600−1000 nm. When considering the complementary optical absorption between donor and Received: December 30, 2019 Accepted: January 2, 2020 Published: January 2, 2020 Leter http://pubs.acs.org/journal/aelccp © 2020 American Chemical Society 367 https://dx.doi.org/10.1021/acsenergylett.9b02842 ACS Energy Lett. 2020, 5, 367−375 D ow nl oa de d vi a SO U T H C H IN A N O R M A L U N IV o n M ar ch 2 6, 2 02 1 at 1 4: 19 :3 6 (U T C ). Se e ht tp s: //p ub s. ac s. or g/ sh ar in gg ui de lin es f or o pt io ns o n ho w to le gi tim at el y sh ar e pu bl is he d ar tic le s.