Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally will require some form of enhanced oil recovery (EOR) technique. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 — 150 m. Pa.s, there is a substantial prospective for tertiary recovery through the implementation of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that is used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complex long-chain amino-amides and maleic acid are used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus, the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be contemplated as remedy polymer systems, since unlike conventional polymers they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of a novel SMA system that has the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Realizing the Efficient Dissolution of Drag Reducer upon pH-Induced Demulsification of Inverse Polymer Emulsion

Realizing the Rapid Release of Drag Reducers via pH-Induced Oil Phase Transition of Inverse Emulsion

pH-Switchable W/O Polymer Emulsion: A Promising Strategy for Rapid Dissolution of Drag Reducers

Use of Ph-Responsive Amphiphilic Systems As Displacement Fluids in Enhanced Oil Recovery

Next-Generation Displacement Fluids for Enhanced Oil Recovery

Next-Generation Gelling Agents for Improved Displacement in Enhanced Oil Recovery Processes

Efficient demulsification of cationic polyacrylate for oil-in-water emulsion: Synergistic effect of adsorption bridging and interfacial film breaking

Biphasic control strategy of polymers and nanoparticles for viscous oil removal and molecular release: Synthesis, mechanism and applications

Novel hydraulic fracturing fluids with improved proppant carrying capacity and pH-adjustable proppant deposition behavior

A new temperature-resistant and fast dissolving nano-silica/poly (AM-AMPS) composite drag reducer for slickwater fracturing

Preparation and properties research of a bifunctional hydrophobic associative polymer drag reduction agent for slick water

Polymer-Coated Nanoparticles for Reversible Emulsification and Recovery of Heavy Oil

Hyperbranched Poly(amido Amine) As an Effective Demulsifier for Oil-in-water Emulsions of Microdroplets

Turbulent Drag Reduction with an Ultra-High-Molecular-Weight Water-Soluble Polymer in Slick-Water Hydrofracking

Developing New Recyclable and pH-Sensitive Amphiphile for Heavy Oil Emulsion and Demulsification: A Molecular Dynamics Study

The Demulsification Properties of Cationic Hyperbranched Polyamidoamines for Polymer Flooding Emulsions and Microemulsions

Self-Assembled Viscoelastic Surfactant Micelles with pH-Responsive Behavior: A New Fracturing-Displacement Integrated Working Fluid for Unconventional Reservoirs

Spontaneous emulsification induced by a novel surfactant-polymer compound system and its application to enhance oil recovery

Synthesis and Mechanistic Investigation of an Amphiphilic Polymer in Enhancing Extra-Heavy Oil Recovery via Viscosity Reduction

Relationship between the dynamic interfacial activity and demulsification performance of hyperbranched poly(amido amine) polyethers

Synthesis and evaluation of new slickwater fracturing fluid for drag reduction