Is the function of chief cells closely influenced by ECL cells?

T. Chiba

DOI: https://doi.org/10.1007/s005350050288

1999-06-01

Journal of Gastroenterology

Abstract:

What problem does this paper attempt to address?

In-situ 3D Imaging of Catalysis Induced Strain in Gold Nanoparticles

Andrew Ulvestad,Kiran Sasikumar,Jong Woo Kim,Ross Harder,Evan Maxey,Jesse N. Clark,Badri Narayanan,Sanket A. Deshmukh,Nicola Ferrier,Paul Mulvaney,Subramanian K.R.S. Sankaranarayanan,Oleg G. Shpyrko

DOI: https://doi.org/10.48550/arXiv.1605.07662

2016-05-25

Abstract:Multi-electron transfer processes, such as hydrogen and oxygen evolution reactions, are crucially important in energy and biological science but require favorable catalysts to achieve fast kinetics. Nanostructuring catalysts can dramatically improve their properties, which can be difficult to understand due to strain and size dependent thermodynamics, the influence of defects, and substrate dependent activities. Here, we report 3D imaging of single gold nanoparticles during catalysis of ascorbic acid decomposition using Bragg coherent diffractive imaging (BCDI) as a route to eliminate ensemble effects while elucidating the strain-activity connection. Local strains were measured in single nanoparticles and modeled using reactive molecular dynamics (RMD) simulations and finite element analysis (FEA) simulations. RMD reveals a new chemical pathway for local strain generation in the gold lattice: chemisorption of hydroxyl ions. FEA reveals that the RMD results are transferable to the larger nanocrystal sizes studied in the experiment. Our study reveals the strain-activity connection and opens a powerful new avenue for joint theoretical and experimental studies of multi-electron transfer processes catalyzed by nanocrystals.

Materials Science
Imaging the Breathing of a Platinum Nanoparticle in Electrochemical Environment

Clément Atlan,Corentin Chatelier,Maxime Dupraz,Isaac Martens,Arnaud Viola,Ni Li,Lu Gao,Steven J. Leake,Tobias U. Schülli,Joël Eymery,Frédéric Maillard,Marie-Ingrid Richard

DOI: https://doi.org/10.48550/arXiv.2203.06941

2022-03-14

Materials Science

Abstract:Surface strain is widely used in gas phase catalysis and electrocatalysis to control the binding energies of adsorbates on metal surfaces. However, $in$ $situ$ or $operando$ strain measurements are experimentally challenging, especially on nanomaterials. Here, we take advantage of the 4$^{th}$ generation Extremely Brilliant Source at the European Synchrotron Radiation Facility (ESRF-EBS, Grenoble, France) to quantify the distribution of strain inside a Pt nanoparticle, and to determine its morphology in an electrochemical environment. Our results show for the first time evidence of heterogeneous and potential-dependent strain distribution between highly-coordinated ({100} and {111} facets) and under-coordinated atoms (edges and corners) as well as evidence of strain propagation from the surface to the bulk of the nanoparticle. These results provide dynamic structural insights to better simulate and design efficient nanocatalysts for energy storage and conversion applications.
Insights into Chemical Dynamics and Their Impact on the Reactivity of Pt Nanoparticles during CO Oxidation by Operando TEM

Milivoj Plodinec,Hannah C. Nerl,Frank Girgsdies,Robert Schlögl,Thomas Lunkenbein,Robert Schlögl

DOI: https://doi.org/10.1021/acscatal.9b03692

IF: 12.9

2020-02-19

ACS Catalysis

Abstract:The functionality of heterogeneous catalysts is influenced by a delicate interplay of multiple parameters, including morphology and structure, chemical potential gradients and related dynamics. Here, we report on how these factors are interconnected. Combining time-resolved transmission electron microscopy imaging and selected area electron diffraction with online conversion detection, CO oxidation over Pt nanoparticles was studied at a pressure of 700 mbar and temperatures up to 500 °C. The different interactions between reactants and catalysts over the entire range of catalytic conversion were investigated. Chemical dynamics in this reaction were found to consist of both morphological transformations and fluctuating structural dynamics. Morphological transformations were observed mostly in low activity regimes, leading to nanoparticles with increased stable surface facets. Meanwhile structural changes were observed during high activity regimes where the partial pressures remained constant. Furthermore, the observed changes were found to occur in both the bulk and the surface of the catalyst. Catalytic cycling revealed that morphological transformations and structural dynamics have different implications on the reactivity and are mostly irreversible.

chemistry, physical
Strain-Induced Corrosion Kinetics at Nanoscale Revealed in Liquid: Enabling Control of Corrosion Dynamics of Electrocatalysis

Fenglei Shi,Wenpei Gao,Hao Shan,Fan Li,Yalin Xiong,Jiaheng Peng,Qian Xiang,Wenlong Chen,Peng Tao,Chengyi Song,Wen Shang,Tao Deng,Hong Zhu,Hui Zhang,Deren Yang,Xiaoqing Pan,Jianbo Wu

DOI: https://doi.org/10.2139/ssrn.3509904

2019-01-01

Abstract:SummaryCorrosion at the nanoscale is vital for the stability of nanoparticles. Understanding the corrosion mechanism can offer insights on how to design more stable nanoparticles during electrocatalysis, such as oxygen reduction reaction (ORR). Here, using a liquid cell (LC) transmission electron microscopy (TEM) technique, we study the corrosion process of palladium@platinum (Pd@Pt) core-shell octahedra at real time. The results revealed that the nanoscale corrosion kinetics was determined synergistically by both the quasi-static factor, local strain, and dynamic factor, local curvature. Specifically, in locations with tensile strain and high local curvature, the etching process is much faster than other places. Density functional theory (DFT) calculation suggested that the dissolution potential of the nanoscale Pd nanocrystal is decreased by the increasement of the strain and meanwhile the calculation indicated that the nanoscale surface Pd atoms trended to be corroded more easily under tensile strain than that under compressive strain. Through the investigation of the nanoscale corrosion mechanisms above, we subsequently designed and synthesized a nanoparticle with smaller strain, which showed higher durability both in in-situ liquid cell and ex-situ ORR stability test.
Bridging the Pressure Gap in CO Oxidation

Sara Blomberg,Uta Hejral,Mikhail Shipilin,Stefano Albertin,Hanna Karlsson,Christian Hulteberg,Christopher Goodwin,David Degerman,Johan Gustafson,Christoph Schlueter,Anders Nilsson,Edvin Lundgren,Peter Amann,Patrick Lömker

DOI: https://doi.org/10.1021/acscatal.1c00806

IF: 12.9

2021-07-09

ACS Catalysis

Abstract:Performing fundamental operando catalysis studies under realistic conditions is a key to further develop and increase the efficiency of industrial catalysts. Operando X-ray photoelectron spectroscopy (XPS) experiments have been limited to pressures, and the relevance for industrial applications has been questioned. Herein, we report on the CO oxidation experiment on Pd(100) performed at a total pressure of 1 bar using XPS. We investigate the light-off regime and the surface chemical composition at the atomistic level in the highly active phase. Furthermore, the observed gas-phase photoemission peaks of CO2, CO, and O2 indicate that the kinetics of the reaction during the light-off regime can be followed operando, and by studying the reaction rate of the reaction, the activation energy is calculated. The reaction was preceded by an in situ oxidation study in 7% O2 in He and a total pressure of 70 mbar to confirm the surface sensitivity and assignment of the oxygen-induced photoemission peaks. However, oxygen-induced photoemission peaks were not observed during the reaction studies, but instead, a metallic Pd phase is present in the highly active regime under the conditions applied. The novel XPS setup utilizes hard X-rays to enable high-pressure studies, combined with a grazing incident angle to increase the surface sensitivity of the measurement. Our findings demonstrate the possibilities of achieving chemical information of the catalyst, operando, on an atomistic level, under industrially relevant conditions.This article has not yet been cited by other publications.

chemistry, physical
Synchrotron Radiation in Situ X-ray Absorption Fine Structure and in Situ X-ray Diffraction Analysis of a High-Performance Cobalt Catalyst Towards the Oxygen Reduction Reaction

Haiying Qin,Longxia Lin,Junkang Jia,Huangliang Ni,Yan He,Juan Wang,Aiguo Li,Zhenguo Ji,Jiabin Liu

DOI: https://doi.org/10.1039/c7cp05888h

2017-01-01

Abstract:Transition metal-based composites are one of the most important electrocatalysts because of their rich redox chemistry. The reaction kinetics of a redox couple is dependent on the chemical valence and is a key issue in electrocatalytic performance. In this study, a metallic Co catalyst was synthesized by pyrolyzing Co(OH)(2). The effect of the chemical valence of Co on the oxygen reduction reaction ( ORR) was investigated by comparing the electrocatalytic properties of three Co-based catalysts containing Co-0, Co2+, and Co3+. The electrocatalytic properties were evaluated mainly by linear scan voltammetry (LSV) and a direct borohydride fuel cell (DBFC) where the Co-based catalysts were used as cathodes. The LSV results show that the ORR peak current density increases with a decrease in chemical valence. The DBFC with the Co-0 cathode exhibits highest power density and good durability. In situ X-ray diffraction combined with in situ X-ray absorption fine structure tests was carried out to reveal the dynamic microstructure evolution of the Co-0 cathode during ORR. The in situ results clearly demonstrate the evolution of metallic Co to Co(OH) (2) and then to CoOOH during the ORR.
Concurrent oxygen evolution reaction pathways revealed by high-speed compressive Raman imaging

Raj Pandya,Florian Dorchies,Davide Romanin,Jean-François Lemineur,Frédéric Kanoufi,Sylvain Gigan,Alex W Chin,Hilton B de Aguiar,Alexis Grimaud

DOI: https://doi.org/10.1038/s41467-024-52536-7

2024-09-27

Abstract:Transition metal oxides are state-of-the-art materials for catalysing the oxygen evolution reaction (OER), whose slow kinetics currently limit the efficiency of water electrolysis. However, microscale physicochemical heterogeneity between particles, dynamic reactions both in the bulk and at the surface, and an interplay between particle reactivity and electrolyte makes probing the OER challenging. Here, we overcome these limitations by applying state-of-the-art compressive Raman imaging to uncover concurrent bias-dependent pathways for the OER in a dense, crystalline electrocatalyst, α-Li2IrO3. By spatially and temporally tracking changes in stretching modes we follow catalytic activation and charge accumulation following ion exchange under various electrolytes and cycling conditions, comparing our observations with other crystalline catalysts (IrO2, LiCoO2). We demonstrate that at low overpotentials the reaction between water and the oxidized catalyst surface is compensated by bulk ion exchange, as usually only found for amorphous, electrolyte permeable, catalysts. At high overpotentials the charge is compensated by surface redox active sites, as in other crystalline catalysts such as IrO2. Hence, our work reveals charge compensation can extend beyond the surface in crystalline catalysts. More generally, the results highlight the power of compressive Raman imaging for chemically specific tracking of microscale reaction dynamics in catalysts, battery materials, or memristors.
Combining In-Situ Transmission Electron Microscopy and Infrared Spectroscopy for Understanding Dynamic and Atomic-Scale Features of Supported Metal Catalysts

Joaquin Resasco,Sheng Dai,George Graham,Xiaoqing Pan,Phillip Christopher

DOI: https://doi.org/10.1021/acs.jpcc.8b03959

2018-06-20

The Journal of Physical Chemistry C

Abstract:The elucidation of structure–property relationships for supported metal catalysts requires atomic-scale descriptions and quantitative measurements of the relative population of various exposed active sites under reaction conditions. The requirement of describing catalyst structures under reaction conditions stems from the potential physical and chemical reconstruction that can be induced by changes in environment. Here we highlight our recent work, where catalyst characterization via a combination of in-situ transmission electron microscopy and infrared spectroscopy is used to provide sample-averaged, site-specific atomic level information on supported metal catalysts under reaction conditions. We show two illustrative examples using different reaction systems: the oxidation of CO over supported Pt and the reduction of CO2 over supported Rh. Using these examples we demonstrate differentiation of the catalytic reactivity of small supported metal clusters from isolated atoms and interrogate the catalytic consequences of structural transformations such as adsorbate-induced surface reconstruction of metal particles and adsorbate-mediated metal particle encapsulation by oxide supports. Insights gained from these techniques help elucidate structure–property relationships for these reactions including structure sensitivity and dynamic reactivity changes. We expect that this combination of characterization techniques will be generally useful for understanding structurally dynamic catalytic systems with atomic resolution.
In situ X-ray photoelectron spectroscopy of model catalysts: At the edge of the gap

S. Blomberg,M.J. Hoffmann,J. Gustafson,N.M. Martin,V.R. Fernandes,A. Borg,Z. Liu,R. Chang,S. Matera,K. Reuter,E. Lundgren

DOI: https://doi.org/10.1103/PhysRevLett.110.117601

2013-02-06

Abstract:We present a High-Pressure X-ray Photoelectron Spectroscopy (HP-XPS) and first-principles kinetic Monte Carlo study addressing the nature of the active surface in CO oxidation over Pd(100). Simultaneously measuring the chemical composition at the surface and in the near-surface gas-phase, we reveal both O-covered pristine Pd(100) and a surface oxide as stable, highly active phases in the near-ambient regime accessible to HP-XPS. Surprisingly, no adsorbed CO can be detected during high CO2 production rates, which can be explained by a combination of a remarkably short residence time of the CO molecule on the surface and mass-transfer limitations in the present set-up.

Chemical Physics
Strain Relaxation in Core-Shell Pt-Co Catalyst Nanoparticles

Elliot Padgett,Megan E. Holtz,Anusorn Kongkanand,David A. Muller

2023-05-30

Abstract:Surface strain plays a key role in enhancing the activity of Pt-alloy nanoparticle oxygen reduction catalysts. However, the details of strain effects in real fuel cell catalysts are not well-understood, in part due to a lack of strain characterization techniques that are suitable for complex supported nanoparticle catalysts. This work investigates these effects using strain mapping with nanobeam electron diffraction and a continuum elastic model of strain in simple core-shell particles. We find that surface strain is relaxed both by lattice defects at the core-shell interface and by relaxation across particle shells caused by Poisson expansion in the spherical geometry. The continuum elastic model finds that in the absence of lattice dislocations, geometric relaxation results in a surface strain that scales with the average composition of the particle, regardless of the shell thickness. We investigate the impact of these strain effects on catalytic activity for a series of Pt-Co catalysts treated to vary their shell thickness and core-shell lattice mismatch. For catalysts with the thinnest shells, the activity is consistent with an Arrhenius dependence on the surface strain expected for coherent strain in dislocation-free particles, while catalysts with thicker shells showed greater activity losses indicating strain relaxation caused by dislocations as well.

Materials Science
Realtime observation of a tungsten-promoted size regulation mechanism in a rhodium catalyst at atomic resolution

Petra Specht,Joo H. Kang,Kartick Tarafder,Robert Cieslinski,David Barton,Bastian Barton,Anna Carlsson,Lin-Wang Wang,Christian Kisielowski

2024-06-09

Abstract:The static and genuine structure of small rhodium and rhodium/tungsten nanoparticles on an alumina support can be imaged with atomic resolution even if single digit atom clusters are investigated. Low dose rate electron microscopy is key to the achievement and can generally be applied to investigate any similar material. In such conditions it becomes feasible to identify the chemical composition of nanocrystals from quantitative contrast analyses alone by counting atoms. The ability to fully characterize an unaltered, initial state of the objects allows targeting structural excitations or conformational changes induced by the electron beam itself. For the specific case of catalytic Rh:W particles we stimulate a tungsten-promoted size regulation mechanism in real time that is driven by Oswald ripening and can be understood by a strong binding of tungsten atoms to the oxygen atoms of the support, which builds up strain as the cluster sizes increase.

Materials Science
Investigating the Dynamics of Pt/CeO2 Catalysts at the Powder Agglomerate Scale by Combining in situ Hyperspectral Raman imaging and SEM‐EDX Analysis

Clément Molinet‐Chinaglia,Laurent Piccolo,Stéphane Loridant,Clément Molinet-Chinaglia

DOI: https://doi.org/10.1002/cctc.202300627

IF: 4.5

2023-07-26

ChemCatChem

Abstract:The dynamics of Pt/CeO2 catalysts is a hot topic since its knowledge can be used to (re)generate more active sites for redox reactions, even at low temperature (<500 °C). While numerous works focus on the atomic scale, the spatial extent of Pt surface diffusion is poorly known. In this work, it is evaluated at the powder agglomerate scale using an original methodology combining SEM‐EDX analysis and in situ optical/microRaman hyperspectral imaging performed on a Pt/CeO2+CeO2 mechanical mixture. No intergranular diffusion of platinum during redox cycles at 500 °C is revealed by these techniques, in particular by the Raman images of Ce3+ and peroxo species, which are highly sensitive to the presence of Pt atoms. It strongly suggests that Pt surface diffusion takes place only at the nanometer scale and could be limited by atom trapping on Pt/CeO2 agglomerates. Our method for investigating diffusion processes at the micrometer scale may be extended to other thermochemical conditions and other materials.

chemistry, physical
High-efficiency CO2 Conversion Via Mechano-Driven Dynamic Strain Engineering of ZnO Nanostructures

Jiangping Ma,Lu Xia,Di Wu,Yajie Feng,Chaogang Ban,Lujie Ruan,Jingfei Guan,Min Zhang,Rundong Zhou,Ji-Yan Dai,Li-Yong Gan,Xiaoyuan Zhou

DOI: https://doi.org/10.1016/j.nanoen.2024.109258

IF: 17.6

2024-01-01

Nano Energy

Abstract:Strain engineering involves intentionally inducing lattice distortion in materials to manipulate their electronic and geometric properties, along with the accompanying bond strength between reactants and catalysts. This approach presents an appealing pathway to optimize catalytic performance. However, it confronts challenges in achieving precise control, scalability and controllable modulation of intermediate species’ adsorption and desorption. Herein, we report a dynamic strain engineering method achieved through ultrasonic cavitation-induced high and low-pressure cycles, enabling periodically adjustable adsorption/desorption properties while bypassing complex synthesis procedures. Illustrated using ZnO and CO2 piezo-reduction reaction as a demonstration, theoretical studies initially predict that adsorption of intermediates *COOH can be regulated within a specific range of strains. Under ultrasonic stimulation, ZnO catalyst with dynamic strain engineering exhibits a CO yield of ∼ 98.8 μmol·g−1·h−1, approximately 16.5 times higher than that achieved under ultraviolet light irradiation without dynamic strain engineering, despite the latter having a considerably stronger input power. Furthermore, we delve into the factors linked to dynamic strain amplitude and frequency. This dynamic strain engineering approach streamlines catalyst preparation and presents innovative possibilities for controlled manipulation of intermediate specie’s adsorption/desorption, with potential applications across a wide range of catalytic systems.
Direct and Continuous Strain Control of Catalysts with Tunable Battery Electrode Materials

Haotian Wang,Shicheng Xu,Charlie Tsai,Yuzhang Li,Chong Liu,Jie Zhao,Yayuan Liu,Hongyuan Yuan,Frank Abild-Pedersen,Fritz B. Prinz,Jens K. Norskov,Yi Cui

DOI: https://doi.org/10.1126/science.aaf7680

IF: 56.9

2016-01-01

Science

Abstract:We report a method for using battery electrode materials to directly and continuously control the lattice strain of platinum (Pt) catalyst and thus tune its catalytic activity for the oxygen reduction reaction (ORR). Whereas the common approach of using metal overlayers introduces ligand effects in addition to strain, by electrochemically switching between the charging and discharging status of battery electrodes the change in volume can be precisely controlled to induce either compressive or tensile strain on supported catalysts. Lattice compression and tension induced by the lithium cobalt oxide substrate of ~5% were directly observed in individual Pt nanoparticles with aberration-corrected transmission electron microscopy. We observed 90% enhancement or 40% suppression in Pt ORR activity under compression or tension, respectively, which is consistent with theoretical predictions.
Operando Insights into CO Oxidation on Cobalt Oxide Catalysts by NAP-XPS, FTIR, and XRD

Liliana Lukashuk,Nevzat Yigit,Raffael Rameshan,Elisabeth Kolar,Detre Teschner,Michael Hävecker,Axel Knop-Gericke,Robert Schlögl,Karin Föttinger,Günther Rupprechter,Michael Hävecker,Robert Schlögl,Karin Föttinger,Günther Rupprechter

DOI: https://doi.org/10.1021/acscatal.8b01237

IF: 12.9

2018-08-07

ACS Catalysis

Abstract:Cobalt oxide Co3O4 has recently emerged as promising, noble metal-free catalyst for oxidation reactions but a better understanding of the active catalyst under working conditions is required for further development and potential commercialization. An operando approach has been applied, combining near ambient (atmospheric) pressure X-ray photoelectron spectroscopy (NAP-XPS), Fourier transform infrared spectroscopy (FTIR), or X-ray diffraction (XRD) with simultaneous catalytic tests of CO oxidation on Co3O4, enabling one to monitor surface and bulk states under various reaction conditions (steady-state and dynamic conditions switching between CO and O2). On the basis of the surface-specific chemical information a complex network of different reaction pathways unfolded: Mars-van-Krevelen (MvK), CO dissociation followed by carbon oxidation, and formation of carbonates. A possible Langmuir-Hinshelwood (LH) pathway cannot be excluded because of the good activity when no oxygen vacancies were detected. The combined NAP-XPS/FTIR results are in line with a MvK mechanism above 100 °C, involving the Co3+/Co2+ redox couple and oxygen vacancy formation. Under steady state, the Co3O4 surface appeared oxidized and the amount of reduced Co2+ species at/near the surface remained low up to 200 °C. Only in pure CO, about 15% of surface reduction were detected, suggesting that the active sites are a minority species. The operando spectroscopic studies also revealed additional reaction pathways: CO dissociation followed by carbon reoxidation and carbonate formation and its decomposition. However, due to their thermal stability in various atmospheres, the carbonates are rather spectators and also CO dissociation seems a minor route. This study thus highlights the benefits of combining operando surface sensitive techniques to gain insight into catalytically active surfaces.

chemistry, physical
In-situ Transcribed Local Coordinations from CoP Nanorods Pre-Catalyst for Efficient Electrocatalytic Oxygen Evolution

Yuhao Zhang,Xiuxiu Zhang,Jing Zhang,Chenyu Yang,Baojie Li,Jianglong Guo,Jingjing Jiang,Wanlin Zhou,Donghai Wu,Dongwei Ma,Shiqiang Wei,Qinghua Liu

DOI: https://doi.org/10.1016/j.nanoen.2024.110414

IF: 17.6

2024-01-01

Nano Energy

Abstract:Transition metal-based compounds generally undergo dynamic surface changes to form active metal (oxy)hydroxides during the oxygen evolution reaction (OER). However, due to the core-shell structure formed by insufficient surface reconstruction and the complexity of the dynamic evolution process, understanding the origin of the catalytic performance derived from the pre-catalyst itself is a great challenge. Herein, we first reveal that a transcriptional relationship of local coordination between the pre-catalyst and the in-situ generated active species by regulating the lattice strain during phosphating with the aid of the nonequilibrium diffusion Kirkendall effect. The combination of electrochemical, ex-situ X-ray absorption fine structure spectroscopy (XAFS) and in-situ synchrotron radiation Fourier transform infrared spectroscopy (SR-FTIR) characterizations uncover that the variation trend of the first shell Co-O bond length in the active species is inherited from the Co-P bond length in the pre-catalyst and the shortened optimal distance of the second shell dual-Co sites is strongly correlated with the inherent OER activity. Thereby, a relation mapping to modify the coordination structure of the active species via the lattice strain of the pre-catalysts is established. This work not only provides a strategy to regulate OER performance via the lattice strain, but also sheds light on the role of the structural and compositional evolution of catalysts in activity during electrocatalytic reactions.
Fundamental investigations of catalyst nanoparticles-DTU Orbit ( 03 / 01 / 2019 )

Elkjær

Abstract:Fundamental investigations of catalyst nanoparticles Heterogeneous catalysis, the conversion of chemicals by the use of a suitable solid state catalyst, is a very important technology in modern society and it is involved in the production of up to 90% of all chemicals. Catalysis has in this way played a significant role in the technological and economic development in the 20th century. There is however a downside to this development and we are seeing significant pollution and pressure on resources. Catalysis therefore has an increasingly important role in limiting pollution and optimizing the use of resources. This development will depend on our fundamental understanding of catalytic processes and our ability to make use of that understanding. This thesis presents fundamental studies of catalyst nanoparticles with particular focus on dynamic processes. Such studies often require atomic-scale characterization, because the catalytic conversion takes place on the molecular and atomic level. Transmission electron microscopy (TEM) has the ability to image nanostructures with atomic resolution and reveal the atomic configuration of the important nanoparticle surfaces. In the present work, TEM has been used to study nanoparticles in situ at elevated temperature and with gas present in the microscope in order to recreate the conditions found in a chemical reactor. This is very important because we know that particles may change shape as their surfaces respond to a changing gas atmosphere. To obtain quantitative and credible information in situ, it is very important that we only study intrinsic structures and phenomena and not those that may be induced by the high energy electrons used to image the specimen. This requires careful consideration of the influence of the electron beam in order to understand, control and minimize that influence. I present four different topics, each related to different aspects of nanoparticle dynamics and catalysis. The first topic is the reduction of a homogeneous solid state precursor to form the catalytically active phase which is metal nanoparticles on an inert support. Here, we have reduced Cu phyllosilicate to Cu on silica and imaged the process in situ. The data obtained established the foundation for modeling work which revealed that the reduction proceeded by an autocatalytic route. Here, the initial nucleation of Cu is slow and the subsequent growth in size is fast because the Cu particles themselves catalyze further reduction. The second topic treated the active state of a methanol synthesis catalyst. This work was performed by a parallel approach, where we investigated identically created nanoparticles both with TEM and X-ray photoelectron spectroscopy (XPS). The methanol synthesis catalyst is a complex high surface area Cu=ZnO=Al2O3 structure that is difficult to study by TEM. We therefore created size-selected CuZn alloy nanoparticles that were transformed by oxidation and reduction into Cu nanoparticles decorated with ZnO. This represents a simplified model system for the high surface area catalyst. The interplay between Cu and ZnO and the exact role of ZnO as a promoter for catalytic activity is not yet fully understood. Our work revealed that the surface of the reduced catalyst consists mainly of Cu decorated with well defined ZnO crystals. It was demonstrated by XPS that a fraction of the ZnO is reduced simultaneously with the Cu under H2 atmosphere, presumably forming a surface alloy in the Cu. The third topic studied the sintering of Cu nanoparticles supported on silica. Sintering is the main deactivation mechanism for the methanol synthesis catalyst and so this topic is of great interest to the development of better catalysts. It was found that sintering proceeded via Ostwald ripening, i. e. the migration of atomic species between particles, with a net flow from small to larger particles resulting in an overall growth in particle size. The presence of CO increased the rate of sintering significantly and the presence of H2O slowed it down. The fourth topic investigated the oxidation of CO on a Pt catalyst in the special case where the reaction displays temporal rate oscillations under fixed conditions. This is a well-known phenomenon, but the mechanism driving the oscillations on nanoparticles has hitherto been unknown. We used nanoreactor technology which allows for simultaneous TEM imaging and activity measurement, also referred to as an Operando experiment. With this we revealed that the shape of the Pt nanoparticles changed in phase with changes in global reaction rate. By the use of reactor modeling it was possible to show that the oscillations were possible due to the coupling between the self-poisoning nature of the CO oxidation reaction on Pt and gas flow and diffusion in the reactor. Our work showed that shape changes can drive global rate oscillations.

Chemistry,Environmental Science,Engineering,Materials Science
Monitoring the Structural Changes in Iridium Nanoparticles during Oxygen Evolution Electrocatalysis with Operando X-ray Total Scattering

Rebecca K Pittkowski,Stefanie Punke,Andy S Anker,Aline Bornet,Nicolas Pierre Louis Magnard,Nicolas Schlegel,Laura G Graversen,Jonathan Quinson,Alexandra Dworzak,Mehtap Oezaslan,Jacob J K Kirkensgaard,Marta Mirolo,Jakub Drnec,Matthias Arenz,Kirsten M Ø Jensen

DOI: https://doi.org/10.1021/jacs.4c08149

IF: 15

2024-10-01

Journal of the American Chemical Society

Abstract:Understanding the structure of nanoparticles under (electro)catalytic operating conditions is crucial for uncovering structure-property relationships. By combining operando X-ray total scattering and pair distribution function analysis with operando small-angle X-ray scattering (SAXS), we obtained comprehensive structural information on ultrasmall (<3 nm) iridium nanoparticles and tracked their changes during oxygen evolution reaction (OER) in acid. When subjected to electrochemical conditions...

chemistry, multidisciplinary
Chemical kinetics for operando electron microscopy of catalysts: 3D modeling of gas and temperature distributions during catalytic reactions

Joshua L Vincent,Jarod W Vance,Jayse T Langdon,Benjamin K Miller,Peter A Crozier,Joshua L. Vincent,Jarod W. Vance,Jayse T. Langdon,Benjamin K. Miller,Peter A. Crozier

DOI: https://doi.org/10.1016/j.ultramic.2020.113080

IF: 2.994

2020-11-01

Ultramicroscopy

Abstract:In situ environmental transmission electron microscopy (ETEM) is a powerful tool for observing structural modifications taking place in heterogeneous catalysts under reaction conditions. However, to strengthen the link between catalyst structure and functionality, an operando measurement must be performed in which reaction kinetics and catalyst structure are simultaneously determined. To determine chemical kinetics for gas-phase catalysis, it is necessary to develop a reliable chemical engineering model to describe catalysis as well as heat and mass transport processes within the ETEM cell. Here, we establish a finite element model to determine the gas and temperature profiles during catalysis in an open-cell operando ETEM experiment. The model is applied to a SiO2-supported Ru catalyst performing CO oxidation. Good agreement is achieved between simulated compositions and those measured experimentally across a temperature range of 25 – 350°C. In general, for lower conversions, the simulations show that the temperature and gas are relatively homogeneous within the hot zone of the TEM holder where the catalyst is located. The uniformity of gas and temperature indicates that the ETEM reactor system behavior approximates that of a continuously stirred tank reactor. The large degree of gas-phase uniformity also allows one to estimate the catalytic conversion of reactants in the cell to within 10% using electron energy-loss spectroscopy. Moreover, the findings indicate that for reactant conversions below 30%, one can reliably evaluate the steady-state reaction rate of catalyst nanoparticles that are imaged on the TEM grid.

microscopy
Anesthesia and Its Allied Disciplines in the Developing World: A Nationwide Survey of the Republic of Zambia

S. Jochberger,F. Ismailova,W. Lederer,V. Mayr,G. Luckner,V. Wenzel,H. Ulmer,W. Hasibeder,M. Dünser

DOI: https://doi.org/10.1213/ane.0b013e318166ecb8

2008-03-01

Abstract:BACKGROUND: Many surgical interventions worldwide are performed in developing countries. To improve survival of acutely and critically ill patients in these countries, basic problems and demands of anesthesia care need to be identified. Using this survey, we evaluated the current status of anesthesia and its allied disciplines (intensive care medicine, emergency medicine, and pain therapy) in the Republic of Zambia. METHODS: Questionnaires were sent to 87 hospitals registered at the Zambian Ministry of Health as performing minor or major surgery. The questionnaire consisted of 111 questions grouped into five sections: general hospital information, anesthesia, intensive care, emergency medicine, and pain therapy. RESULTS: Sixty-eight questionnaires could be statistically evaluated (78%). The most common operations were obstetric/gynecological and abdominal surgical procedures. Dissociative ketamine anesthesia was the technique most often used for general anesthesia (50%). Endotracheal intubation was performed in 10% of patients undergoing general anesthesia. In most hospitals (78%), anesthesia was administered by nonphysicians. Only 5 of 68 hospitals (7%) reported having an intensive care unit, with 29 beds to serve the entire country. Anesthesiologists play almost no role in emergency medicine and pain therapy. CONCLUSIONS: Anesthesia in the Republic of Zambia is a highly under-developed and under-resourced medical specialty.

Is the function of chief cells closely influenced by ECL cells?

In-situ 3D Imaging of Catalysis Induced Strain in Gold Nanoparticles

Imaging the Breathing of a Platinum Nanoparticle in Electrochemical Environment

Insights into Chemical Dynamics and Their Impact on the Reactivity of Pt Nanoparticles during CO Oxidation by Operando TEM

Strain-Induced Corrosion Kinetics at Nanoscale Revealed in Liquid: Enabling Control of Corrosion Dynamics of Electrocatalysis

Bridging the Pressure Gap in CO Oxidation

Synchrotron Radiation in Situ X-ray Absorption Fine Structure and in Situ X-ray Diffraction Analysis of a High-Performance Cobalt Catalyst Towards the Oxygen Reduction Reaction

Concurrent oxygen evolution reaction pathways revealed by high-speed compressive Raman imaging

Combining In-Situ Transmission Electron Microscopy and Infrared Spectroscopy for Understanding Dynamic and Atomic-Scale Features of Supported Metal Catalysts

In situ X-ray photoelectron spectroscopy of model catalysts: At the edge of the gap

Strain Relaxation in Core-Shell Pt-Co Catalyst Nanoparticles

Realtime observation of a tungsten-promoted size regulation mechanism in a rhodium catalyst at atomic resolution

Investigating the Dynamics of Pt/CeO2 Catalysts at the Powder Agglomerate Scale by Combining in situ Hyperspectral Raman imaging and SEM‐EDX Analysis

High-efficiency CO2 Conversion Via Mechano-Driven Dynamic Strain Engineering of ZnO Nanostructures

Direct and Continuous Strain Control of Catalysts with Tunable Battery Electrode Materials

Operando Insights into CO Oxidation on Cobalt Oxide Catalysts by NAP-XPS, FTIR, and XRD

In-situ Transcribed Local Coordinations from CoP Nanorods Pre-Catalyst for Efficient Electrocatalytic Oxygen Evolution

Fundamental investigations of catalyst nanoparticles-DTU Orbit ( 03 / 01 / 2019 )

Monitoring the Structural Changes in Iridium Nanoparticles during Oxygen Evolution Electrocatalysis with Operando X-ray Total Scattering

Chemical kinetics for operando electron microscopy of catalysts: 3D modeling of gas and temperature distributions during catalytic reactions

Anesthesia and Its Allied Disciplines in the Developing World: A Nationwide Survey of the Republic of Zambia