Abstract:Vascularization is essential for the regeneration of three-dimensional (3D) bioprinting organs. As a general method to produce microfluidic channels in 3D printing constructs, coaxial extrusion has attracted great attention. However, the biocompatible bioinks are very limited for coaxial extrusion to fabricate microchannels with regular structure and enough mechanical properties. Herein, a hybrid bioink composed of alginate (Alg) and silk fibroin (SF) was proposed for 3D bioprinting of microchannel networks based on coaxial extrusion. The rheological properties of the bioink demonstrated that the hybrid Alg/SF bioink exhibited improved viscosity and shear thinning behavior compared with either pure Alg or SF bioink and had similar storage and loss modulus in a wide range of shear frequency, indicating a sound printability. Using a coaxial extrusion system with calcium ions and Pluronic F127 flowing through the core nozzle as cross-linkers, the Alg/SF bioink could be extruded and deposited to form a 3D scaffold with interconnected microchannels. The regular structure and smooth pore wall of microchannels inside the scaffold were demonstrated by optical coherence tomography. Micropores left by the rinse of F127 were observed by scanning electron microscope, constituting a hierarchical structure together with the microchannels and printed macropores. Fourier transform infrared spectroscopy analysis proved the complete rinse of F127 and the formation of beta-sheet SF structure. Thus, Alg/SF could form a double cross-linked network, which was much stronger than the pure Alg network. Moreover, cells in the Alg/SF scaffold showed higher viability and proliferation rate than in the Alg scaffold. Therefore, Alg/SF is a promising bioink for coaxial extrusion-based 3D bioprinting, with the printed microchannel network beneficial for complex tissue and organ regeneration.

Voxelated bioprinting of modular double-network bio-ink droplets

Coaxial 3D Bioprinting of Organ Prototyps from Nutrients Delivery to Vascularization

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

Coaxial Nozzle-Assisted 3D Bioprinting with Built-in Microchannels for Nutrients Delivery.

Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks

Directly Coaxial 3D Bioprinting of Large-Scale Vascularized Tissue Constructs.

Dual-core Coaxial Bioprinting of Double-Channel Constructs with a Potential for Perfusion and Interaction of Cells.

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

3D Printing of Cell‐Laden Microgel‐Based Biphasic Bioink with Heterogeneous Microenvironment for Biomedical Applications

Mussel-Inspired Naturally Derived Double-Network Hydrogels and Their Application in 3D Printing: from Soft, Injectable Bioadhesives to Mechanically Strong Hydrogels.

Cucurbit[8]uril Mediated Supramolecular and Photocrosslinked Interpenetrating Network Hydrogel Matrices for 3D‐Bioprinting

Three-Dimensional Bioprinting Of Perfusable Hierarchical Microchannels With Alginate And Silk Fibroin Double Cross-Linked Network

Volumetric Bioprinting of Complex Living-Tissue Constructs Within Seconds

Voxelated Bioprinting of Mechanically Robust Multiscale Porous Scaffolds for Pancreatic Islets

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels

Three-dimensional (3D) bioprinting of medium toughened dipeptide hydrogel scaffolds with Hofmeister effect

Bioinspired coacervate-based bioinks for construction of multiscale tissue engineering scaffolds

3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity

Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction

Voxelated soft matter via multimaterial multinozzle 3D printing