Upgrading a large and centralised municipal wastewater treatment plant with sequencing batch reactor technology for integrated nutrient removal and phosphorus recovery: Environmental and economic life cycle performance

Siti Safirah Rashid,Yong-Qiang Liu,Chi Zhang

DOI: https://doi.org/10.1016/j.scitotenv.2020.141465

2020-12-01

Abstract:<p>Although nutrient removal and recovery from municipal wastewater are desirable to protect phosphorus resource and water-bodies from eutrophication, it is unclear how much environmental and economic benefits and burdens it might cause. This study evaluated the environmental and economic life cycle performance of three different upgraded Processes A, B and C with commercially available technologies for nutrient removal and phosphorus recovery based on an existing Malaysian wastewater treatment plant with a sequencing batch reactor technology and diluted municipal wastewater. It is found that the integration of nutrient removal, phosphorus recovery and electricity generation in all upgraded processes reduced eutrophication potential by 62–76%, and global warming potential by 7–22%, which, however, were gained at the cost of increases in human toxicity, acidification, abiotic depletion (fossil fuel) and freshwater ecotoxicity potentials by an average of 23%. New technologies for nutrient removal and phosphorus recovery are thus needed to achieve holistic rather than some environmental benefits at the expense of others. In addition, the study on two different functional units (FU), i.e. per m³ treated wastewater and per kg struvite recovered, shows that FU affected environmental assessment results, but the upgraded Process C had the least overall environmental burden with either of FUs, suggesting the necessity to use different functional units when comparing and selecting different technologies with two functions such as wastewater treatment and struvite production to confirm the best process configuration. The total life cycle costs of Processes A, B and C were 10.7%, 29.8% and 28.1%, respectively, higher than the existing process due to increased capital and operating costs. Therefore, a trade-off between environmental benefits and cost has to be balanced for technology selection or new integrated technologies have to be developed to achieve environmentally sustainable wastewater treatment economically.</p>

environmental sciences

What problem does this paper attempt to address?

The problem this paper attempts to address is the evaluation of the environmental and economic lifecycle performance of using Sequencing Batch Reactor (SBR) technology for integrated nutrient removal and phosphorus recovery during the upgrade of large centralized municipal wastewater treatment plants. Specifically, the study aims to:

1. **Evaluate Environmental Impact**: Compare the environmental benefits and burdens of the existing treatment process with three upgraded processes in terms of nutrient removal and phosphorus recovery using the Life Cycle Assessment (LCA) method. The main environmental impact categories of interest include Eutrophication Potential (EP), Global Warming Potential (GWP), Human Toxicity Potential (HTP), Acidification Potential (AP), Freshwater Ecotoxicity Potential (FEP), and Fossil Fuel Depletion Potential (ADFP).

2. **Evaluate Economic Benefits**: Assess the total lifecycle costs of the three upgraded processes relative to the existing process through Life Cycle Cost (LCC) analysis, including construction and operational costs.

3. **Select the Optimal Process**: Provide guidance for the upgrade of wastewater treatment plants in Malaysia based on the results of environmental and economic assessments to determine the best process configuration.

4. **Consider the Impact of Different Functional Units**: Investigate the impact of two different functional units (per cubic meter of treated wastewater and per kilogram of recovered struvite) on the environmental assessment results to ensure comprehensiveness and accuracy.

Overall, this paper aims to provide a scientific basis for the upgrade of wastewater treatment plants through integrated environmental and economic assessments, achieving a balance between environmental sustainability and economic feasibility.