[Electroencephalography and cognitive processes in schizophrenia].

M. Alfimova,L. Uvarova,V. Trubnikov

Abstract:

What problem does this paper attempt to address?

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Liwu Fan,J.M. Khodadadi

DOI: https://doi.org/10.1016/j.rser.2010.08.007

IF: 16.799

2011-01-01

Renewable and Sustainable Energy Reviews

Abstract:A review of experimental/computational studies to enhance the thermal conductivity of phase change materials (PCM) that were conducted over many decades is presented. Thermal management of electronics for aeronautics and space exploration appears to be the original intended application, with later extension to storage of thermal energy for solar thermal applications. The present review will focus on studies that concern with positioning of fixed, stationary high conductivity inserts/structures. Copper, aluminum, nickel, stainless steel and carbon fiber in various forms (fins, honeycomb, wool, brush, etc.) were generally utilized as the materials of the thermal conductivity promoters. The reviewed research studies covered a variety of PCM, operating conditions, heat exchange and thermal energy storage arrangements. The energy storage vessels included isolated thermal storage units (rectangular boxes, cylindrical and annular tubes and spheres) and containers that transferred heat to a moving fluid medium passing through it. A few studies have focused on the marked role of flow regimes that are formed due to the presence of thermally unstable fluid layers that in turn give rise to greater convective mixing and thus expedited melting of PCM. In general, it can be stated that due to utilization of fixed high conductivity inserts/structures, the conducting pathways linking the hot and cold ends must be minimized.
Review on the thermal property enhancement of inorganic salt hydrate phase change materials

Xi Man,Hao Lu,Qing Xu,Changjun Wang,Ziye Ling

DOI: https://doi.org/10.1016/j.est.2023.108699

IF: 9.4

2023-11-01

Journal of Energy Storage

Abstract:Inorganic salt hydrates in phase change materials (PCM) are important modern materials for latent heat storage at low temperatures (below 120 °C), which is conducive for the efficient use and saving of energy. However, inorganic salt hydrates still have some drawbacks, including high supercooling, phase separation, leakage, low thermal conductivity, and instability. This paper reviews the recent improvements that researchers have made to some classical solutions, such as nucleating agents and thickeners, and proposes some methods, such as eutectic, porous materials, microencapsulation, and multistage encapsulation, to regulate the physical properties of inorganic hydrated salts and prepare PCMs with higher thermal conductivity and better thermal stability. Additionally, this review also introduces the application of inorganic salt hydrates in solar water heating, solar energy building, solar photovoltaic panel heat dissipation, solar photovoltaic-photothermal systems, and other fields, and highlights that future research and development can focus on the research and application of inorganic salts hydrates to address some of the drawbacks of existing organic PCMs.

energy & fuels
Inorganic salt based shape-stabilized composite phase change materials for medium and high temperature thermal energy storage: Ingredients selection, fabrication, microstructural characteristics and development, and applications

Chuan Li,Qi Li,Xuekun Lu,Ruihuan Ge,Yanping Du,Yaxuan Xiong

DOI: https://doi.org/10.1016/j.est.2022.105252

IF: 9.4

2022-08-20

Journal of Energy Storage

Abstract:Inorganic salts are promising and effective candidates used as phase change materials (PCMs) for medium and high temperature thermal energy storage applications, owning to their suitable melting temperature range, favourable energy storage density and high thermal stability. However, limited by the two main challenges of low thermal conductivity and chemical incompatibility, the large-scale utilization of inorganic salts has been significantly restricted at both industrial and commercial scales. Recent researchers have indicated that the development of shape-stabilized composite phase change materials (CPCMs) could provide an effective solution to overcome these challenges. Such CPCMs are consisted of an inorganic salt for energy storage, a skeleton structure material (SSM) for shape stabilization and a thermal conductivity enhancement additive (TCEA) for heat transfer enhancement, and has shown to achieve an excellent combination of thermophysical and mechanical properties. In this review, the key research progresses on such salt based composites have been reviewed via summarizing the ingredients selection, module fabrication, microstructural characteristics and development, as well as applications in medium and high temperature thermal energy storage fields. The relationships between the material properties and microstructural formation mechanism are comprehensively reviewed and discussed by comparing different fabrication approaches with the aims to provide the reader an in-depth understanding on the design and fabricating considerations of these composites. Finally, the future research efforts and challenges of such salt based composites are also summarized and prospected through emphasizing on the significance of development of new fabrication technologies that are cost-effective and high-efficiency for practical applications.

energy & fuels
Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion

Xiao Chen,Piao Cheng,Zhaodi Tang,Xiaoliang Xu,Hongyi Gao,Ge Wang

DOI: https://doi.org/10.1002/advs.202001274

IF: 15.1

2021-03-03

Advanced Science

Abstract:<p>Phase change materials (PCMs) can alleviate concerns over energy to some extent by reversibly storing a tremendous amount of renewable and sustainable thermal energy. However, the low thermal conductivity, low electrical conductivity, and weak photoabsorption of pure PCMs hinder their wider applicability and development. To overcome these deficiencies and improve the utilization efficiency of thermal energy, versatile carbon materials have been increasingly considered as supporting materials to construct shape‐stabilized composite PCMs. Despite some carbon‐based composite PCMs reviews regarding thermal conductivity enhancement, a comprehensive review of carbon‐based composite PCMs does not exist. Herein, a systematic overview of recent carbon‐based composite PCMs for thermal storage, transfer, conversion (solar‐to‐thermal, electro‐to‐thermal and magnetic‐to‐thermal), and advanced multifunctional applications, including novel metal organic framework (MOF)‐derived carbon materials are provided. The current challenges and future opportunities are also highlighted. The authors hope this review can provide in‐depth insights and serve as a useful guide for the targeted design of high‐performance carbon‐based composite PCMs.</p>

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Nano additive enhanced salt hydrate phase change materials for thermal energy storage

B. Kalidasan,A. K. Pandey,R. Saidur,M. Samykano,V. V. Tyagi

DOI: https://doi.org/10.1080/09506608.2022.2053774

2022-03-25

International Materials Reviews

Abstract:Energy storage plays a vital role in sustainable development. Focus on energy storage using phase change materials (PCMs) are of current research hotspot due to high latent heat value. Nevertheless, poor thermal conductivity, supercooling, phase separation, corrosive nature of salt hydrate is of great concern. Distress related to properties of PCM is resolved using nano additives. Major research focus on the dispersion of nano additive with PCM depends on (a) technique of preparing a novel composite PCM; (b) improvement of their thermophysical characteristic; and (c) advanced application for human comfort without polluting the environment. This article presents a critical review of hybridization techniques of metal, carbon and polymer additives on salt hydrate PCMs. To facilitate researchers, the significant variation on thermophysical properties of salt hydrate with nano additives are vitally compared, analysed and critically reviewed. This review article also includes the advanced application of nano additives-based salt hydrate PCMs.Highlights Salt hydrates are cheaper than organic PCM and exhibit good thermal properties for TES.Synthesis and hybridization techniques of composite salt hydrate are elaborated.Energy storage potential increases with the dispersion of nano additives.Nano additive effects on thermal and chemical stability are emphasized.Applications of nano additive PCM with 0–350°C PTT are presented.GRAPHICAL

materials science, multidisciplinary
Carbon-Filled Organic Phase-Change Materials for Thermal Energy Storage: A Review

Guijun Yang,Yoon-Ji Yim,Ji Won Lee,Young-Jung Heo,Soo-Jin Park

DOI: https://doi.org/10.3390/molecules24112055

IF: 4.6

2019-05-29

Molecules

Abstract:Phase-change materials (PCMs) are essential modern materials for storing thermal energy in the form of sensible and latent heat, which play important roles in the efficient use of waste heat and solar energy. In the development of PCM technology, many types of materials have been studied, including inorganic salt and salt hydrates and organic matter such as paraffin and fatty acids. Considerable research has focused on the relationship between the material structure and energy storage properties to understand the heat storage/emission mechanism involved in controlling the energy storage performance of materials. In this study, we review the application of various carbon-filled organic PCMs in the field of heat storage and describe the current state of this research.

chemistry, multidisciplinary,biochemistry & molecular biology
CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification

Qirui Wang,Xiaoling Tan,Hongen Nian,Xiang Wang,Chao Xue,Yujing Zhao,Zhaoying Wang,Yongquan Zhou

DOI: https://doi.org/10.1016/j.est.2023.110349

IF: 9.4

2024-03-01

Journal of Energy Storage

Abstract:With the establishment of the basic policy of environmentally-friendly and resource-saving society, the energy storage technology using phase change materials (PCMs) as the medium has developed unprecedentedly. Hydrated salt PCMs plays a vital role due to its large latent heat density, wide range of phase transition temperature, and high thermal conductivity. However, the problems of low enthalpy, poor thermal stability and phase separation are critical drawbacks of composite phase change materials (CPCMs), which limited the extensive use in fields of energy storage. In this work, the flaky vermiculite (MEVM) was fabricated by the acid treatment and alkali leaching, and the cured lotus root starch (CLRS) was embedded and used to enhance the water holding capability of hydrated salts. A series of sodium acetate trihydrate (SAT)-CLRS/MEVM was prepared, and the form-stable composite phase change materials (SAT fs-CPCMs) were obtained. Results showed that the encapsulation capacity of SAT fs-CPCM with 2 wt% CLRS was 71.3 %, and the thermal enthalpy reached 180.1 J/g, which was 43.7 % higher than that of SAT/MEVM. The contact angle of the sample with H2O was 22.24°, which represented hydrophilicity. SAT fs-CPCM also had good thermal stability and thermal reliability. After 200 thermal cycles, the enthalpy loss of the SAT fs-CPCM was only 5.2 %, and the 200th enthalpy value was 173.72 J/g. In addition, Calculations indicated that there were hydrogen bonds and van der Waals weak interaction between SAT and CLRS. This work provides a new perspective for the improvement of the thermal properties of hydrated salt and offers a promising approach for the applications of PCMs in cost-effective energy storage.

energy & fuels
Heat transfer characteristics and compatibility of molten salt/ceramic porous composite phase change material

Shuai Zhang,Ziyuan Li,Yuanpeng Yao,Limei Tian,Yuying Yan

DOI: https://doi.org/10.1016/j.nanoen.2022.107476

IF: 17.6

2022-09-01

Nano Energy

Abstract:Molten salts are popular energy storage materials for medium- and high-temperature thermal energy storage. However, current methods for heat transfer enhancement do not apply due to the high corrosivity of molten salts and extreme high-temperature environment. Herein, porous silicon carbide (SiC) ceramic and solar salt are formed into a composite phase change material (PCM). The ceramic skeleton is fabricated to an open-cell structure with high porosity and a large pore configuration. The SiC ceramic is wetted by the solar salt, so that the impregnation of salt into ceramic achieves a high loading at atmospheric pressure. The result of visual inspection shows that the temperature distribution in the composite PCM is more uniform compared with pure solar salt. The maximum temperature difference is reduced from 148 °C to 130 °C and the overall phase change rate is increased by up to 42.9 %. The SiC ceramics show excellent corrosion resistance during the cycles of thermal charging and discharging as compared to copper and aluminium which are the widely used thermal promoters for low-temperature PCMs. The results obtained from reactive molecular dynamics (MD) simulation are consistent with the corrosion behaviours of SiC ceramic in solar salt from aspects of physical dissolution, chemical reaction, and thermal stress failure. The composite PCM has advantages of simple preparation, low cost, and easy maintenance, therefore it has a great potential for large-scale applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Enhanced thermal performance of NaCH3COO·3H2O-Na2S2O3·5H2O eutectic based composite phase change materials with hybrid dimensional carbon nanomaterials and modified lotus root starch

Xiaoling Tan,Xiaobin Gu,Hongen Nian,Xiang Wang,Jinhong Li,Qirui Wang,Zhaoying Wang,Yujing Zhao,Yongquan Zhou

DOI: https://doi.org/10.1016/j.est.2024.112418

IF: 9.4

2024-08-01

Journal of Energy Storage

Abstract:Inorganic phase change materials (PCM) with relatively high thermal storage capacity and low cost suffer from serious leakge, supercooling and low thermal conductivity, impeding its large-scale application. Herein, hybrid dimensional carbon nanomaterials including carbon nanofiber and graphene, was adopted ot tackle these issues. Furthermore, modified lotus root starch was employed to enhance the overall thermal storage capacity of the composite PCM. The comprehensive properties of the composite PCM were characterized by the technology of SEM, XRD, FT-IR, hot disk, viscometer, DSC, TGA, DFT calculation method. The results show than with the addition of hybrid dimensional carbon nanomaterials, semi-crystallization time of NaCH3COO·3H2O-Na2S2O3·5H2O/hybrid dimensional carbon nanomaterials composite PCM decreased from 0.96 min to 0.78 min, indicating the substantial supercooling mitigiation of hybrid dimensional carbon nanomaterials. Meanwhile, the addition of hybrid dimensional carbon nanomaterials also improve the thermal conductivity of the composite PCM to 1.403 W/(m·K), 2.5 times of that of NaCH3COO·3H2O-Na2S2O3·5H2O eutectic. It is worth noting that the addition of modified lotus root starch increased the maximum enthalpy of the composite PCM by 9.1%. The more hygrogen bonds of the composite which can improve the PCM-holding capacity, are responsible for this enthalpy increase. The study results can provide new insight on the high-performance inorganic PCM preparation and large-scale application.

energy & fuels
Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Silong Wang,Que Huang,Zhihua Sun,Yuhao Wang,Taixin Liang,Baoguo Wang,Chunfang Fan,Changcheng Liu

DOI: https://doi.org/10.1016/j.carbon.2024.119174

IF: 10.9

2024-04-24

Carbon

Abstract:Porous carbon network-based phase change composites have been widely used in energy storage and thermal management related fields. At present, the demand of energy crisis for photothermal energy storage and the prevention and management of thermal abuse of electronic equipment constantly promote the development of carbon-based composite phase change materials (PCMs). Therefore, a series of new composite materials filled with PCMs and polyethylene glycol (PEG) and added with flame-retardant magnesium hydroxide were developed, which makes the composites show certain flame-retardant ability in high-temperature environments. The results show that the thermal conductivity increases from 0.25 to 0.94 W/m·K, and the latent heat of phase change remains at 142.7 J/g. In addition, due to the capillary effect caused by the synergistic effect of multi-pore carbon (MPC) structure and cellulose macromolecular chain, the composite material has good shape stability, which effectively prevents the leakage behavior of PCMs during solid-liquid phase change. Moreover, the absorbance of the composite material can reach 1.28 L/(g cm) in the ultraviolet-visible light range of 200 nm- 800 nm, and its photothermal conversion efficiency can reach 90.8%. Therefore, this material has a broad application prospect in the thermal management of electronic equipment and photothermal energy storage devices.

materials science, multidisciplinary,chemistry, physical
Review on Thermal Conductivity Improvement of Phase Change Materials with Enhanced Additives for Thermal Energy Storage

Changlu Xu,Huan Zhang,Guiyin Fang

DOI: https://doi.org/10.1016/j.est.2022.104568

IF: 9.4

2022-01-01

Journal of Energy Storage

Abstract:With the development of economy, more and more problems related to energy have been paid more and more attentions. Phase change materials (PCMs) can store energy, which can better solve the problems of energy distribution and supply in some aspects. Because PCMs may be endothermic or exothermic at constant phase change temperature, they are favored in various industries. However, PCMs have a problem of poor thermal conductivity, which affects the heat transfer efficiency of the PCMs. This work reviews the methods to enhance thermal conductivity of PCMs. Thermal conductivity of PCMs is mainly enhanced through adding carbon-based materials and metal-based materials, etc. The PCMs with carbon-based materials and metal-based materials have better thermal characteristics and potential prospects of development and application. In addition, determining thermal conductivity methods, including determining thermal conductivity of PCMs theoretically and experimentally are are presented. Finally, the applications of the PCMs in some fields, such as solar energy utilization, building conservation, waste heat recovery and textile regulating temperature, are summarized and analyzed.
Experimental investigation on the performance of binary carbon-based nano-enhanced inorganic phase change materials for thermal energy storage applications

Reji Kumar Rajamony,Johnny Koh Siaw Paw,Jagadeesh Pasupuleti,A.K. Pandey,Chong Tak Yaw,Sieh Kiong Tiong,Talal Yusaf,M. Samykano,A.G.N. Sofiah,Imtiaz Ali Laghari,Oday A. Ahmed,K. Kadirgama

DOI: https://doi.org/10.1016/j.est.2024.111373

IF: 9.4

2024-03-21

Journal of Energy Storage

Abstract:Phase change materials (PCMs) are considered potential resources for Thermal energy storage (TES) applications. However, the PCMs are limited because of their lower thermal conductivity, resulting in a significant decrease in heat transport and energy storage capability. The foremost objective of the present research is to formulate a novel salt hydrate PCM filled with binary carbon-based nanoparticles (graphene and multi-walled carbon nanotubes) at various weight concentrations and examine the thermophysical properties. A two-step approach is used to formulate binary nanomaterials dispersed salt hydrate PCM. The formulated binary nanocomposite's thermo-physical properties like morphological behaviour, thermal stability, chemical stability, melting enthalpy, optical performance, rate of heat transfer and thermal reliability were characterized. The binary nanoparticle-enhanced nanocomposites can form a decent thermal network, resulting in a remarkable enhancement in thermal conductivity by 160 % (1.2 W/mK) compared to pure salt hydrate. Moreover, a remarkable improvement in optical absorptance and a reduction in optical transmittance by 82.55 % for 0.7 wt% graphene and 0.07 wt% MWCNT enhanced salt hydrate PCM (SAHGrM-0.07) than pure salt hydrate PCM. In addition, the formulated nanocomposites possess excellent heat storage capability, chemical and thermal stability after 300-thermal cycling. The binary carbon-based nanoparticle-enhanced salt hydrate nanocomposites offered acceptable thermal and chemical stability, thermal reliability, and heat transmission characteristics, by this means reflecting its appropriateness for medium-temperature solar TES applications.

energy & fuels
Review on Thermal Conductivity Enhancement, Thermal Properties and Applications of Phase Change Materials in Thermal Energy Storage

Yaxue Lin,Yuting Jia,Guruprasad Alva,Guiyin Fang

DOI: https://doi.org/10.1016/j.rser.2017.10.002

2018-01-01

Abstract:In recent years, energy conservation and environmental protection have become most important issues for humanity. Phase change materials (PCMs) for thermal energy storage can solve the issues of energy and environment to a certain extent, as PCMs can increase the efficiency and sustainability of energy. PCMs possess large latent heat, and they store and release energy at a constant temperature during the phase change process. Thereby PCMs have gained a wide range of applications in various fields, such as buildings, solar energy systems, power systems and military industry. However, low thermal conductivity of PCMs leads to low heat transfer rate, thus, numerous studies have been carried out to improve thermal conductivity of PCMs. The main purpose of this paper is to review the methods for enhancing thermal conductivity of PCMs, which include adding additives with high thermal conductivity and encapsulating phase change materials. It is found that addition of thermal conductivity enhancement fillers is a more effective method to improve thermal conductivity of PCMs, where carbon-based material additives possess a more promising application prospect. Finally, the applications of PCMs in solar energy system, buildings, cooling system, textiles and heat recovery system are also analyzed.
Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite Phase Change Material

Zhoujian An,Wenjie Hou,Xiaoze Du,Zhongzheng Huang,Hamir Johan Mombeki Pea,Dong Zhang,Xiaomin Liu

DOI: https://doi.org/10.1007/s11630-024-1990-4

IF: 2.013

2024-06-22

Journal of Thermal Science

Abstract:Phase change materials (PCMs) are a kind of highly efficient thermal storage materials which have a bright application prospect in many fields such as energy conservation in buildings, waste heat recovery, battery thermal management and so on. Especially inorganic hydrated salt PCMs have received increasing attention from researchers due to their advantages of being inexpensive and non-flammable. However, inorganic hydrated salt PCMs are still limited by the aspects of inappropriate phase change temperature, liquid phase leakage, large supercooling and severe phase separation in the application process. In this work, sodium acetate trihydrate was selected as the basic inorganic PCM, and a novel shape-stabilized composite phase change material (CPCM) with good thermal properties was prepared by adding various functional additives. At first, the sodium acetate trihydrate-acetamide binary mixture was prepared and the melting point was adjusted using acetamide. Then the binary mixture was incorporated into expanded graphite to synthesize a novel shape-stabilized CPCM. The thermophysical properties of the resultant shape-stabilized CPCM were systematically investigated. The microscopic morphology and chemical structure of the obtained shape-stabilized CPCM were characterized and analyzed. The experiment results pointed out that acetamide could effectively lower the melting point of sodium acetate trihydrate. The obtained shape-stabilized CPCM modified with additional 18% (mass fraction) acetamide and 12% (mass fraction) expanded graphite exhibited good shape stability and thermophysical characteristics: a low supercooling degree of 1.75°C and an appropriate melting temperature of 40.77°C were obtained; the latent heat of 151.64 kJ/kg and thermal conductivity of 1.411 W/(m·K) were also satisfactory. Moreover, after 50 accelerated melting-freezing cycles, the obtained shape-stabilized CPCM represented good thermal reliability.

engineering, mechanical,thermodynamics
Review on Thermal Performances and Applications of Thermal Energy Storage Systems with Inorganic Phase Change Materials

Yaxue Lin,Guruprasad Alva,Guiyin Fang

DOI: https://doi.org/10.1016/j.energy.2018.09.128

IF: 9

2018-01-01

Energy

Abstract:For solving the global problems of environmental pollution and energy shortages, thermal energy storage system that can improve the efficiency and utilization ratio of energy and solve the gap between energy demand and supply, has received more attention in recent years. More specifically, the latent thermal storage systems that use phase change materials (PCMs) as storage media, possessing high latent heat storage density and almost constant phase change temperature are the focus area in thermal energy storage. Previously, most of the researches on PCMs were organic, however in recent years, inorganic PCMs with large phase change temperature range have been paid more and more attention. In common inorganic PCMs, hydrated salts possess lower phase change temperature, applying in buildings, solar water heating systems, textiles, etc., and molten salts and metals have higher phase change temperature, applying in concentrated solar power (CSP) generation and industrial waste heat recovery etc. Each has its own outstanding merits, for example, inorganic salts possess a large latent heat storage capacity and metals possess an extremely high thermal conductivity. Therefore, this review focuses on the researches of inorganic PCMs in recent years and summaries their thermal properties, and introduces the integration of inorganic PCMs into heat exchangers and some applications of inorganic PCMs in main systems, seeking to give readers a relatively comprehensive awareness on them.
Salt hydrate phase change materials: Current state of art and the road ahead

Prakhar Dixit,Vennapusa Jagadeeswara Reddy,Sumit Parvate,Apoorv Balwani,Jitendra Singh,Tushar Kanti Maiti,Aravind Dasari,Sujay Chattopadhyay

DOI: https://doi.org/10.1016/j.est.2022.104360

IF: 9.4

2022-07-01

Journal of Energy Storage

Abstract:Due to high energy storage densities and reduced requirement of maintenance or moving parts, phase change materials are believed to have great potential as thermal energy storage materials. Salt hydrate phase change materials have been relevant since the earliest commercial deployment of latent heat thermal energy storage solutions, however a deeper look into the present standing, commercial requirements and performance improvements of this class of materials indicates that their capabilities have remained underdeveloped, and their advantages, underleveraged. These phase change materials have better thermal performance, better flame retardance, lower manufacturing costs, and a more sustainable supply than their organic counterparts, although a few limitations still exist, often hampering a more widespread adoption. As such, much research in recent years has been focused on eliminating these shortcomings. Presently, all these challenges are critically reviewed, and relevant mitigation/enhancement strategies are also discussed. In the purview of this discussion, shape stabilized composites arise as a singular strategy to alleviate the performance properties of salt hydrate phase change materials across multiple dimensions. A detailed review on the advantages offered by shape stabilized phase change materials is presented along with relevant development studies reported in the literature. Altogether, the reported information provides a perspective towards commercial realization of salt hydrate phase change materials in a wide range of applications, spanning from cold chain logistics to textile incorporation and building materials to solar heating solutions.

energy & fuels
Role of phase change materials in thermal energy storage: Potential, recent progress and technical challenges

M. Samykano

DOI: https://doi.org/10.1016/j.seta.2022.102234

IF: 7.632

2022-08-01

Sustainable Energy Technologies and Assessments

Abstract:Thermal energy storage (TES) using phase change materials (PCM) have become promising solutions in addressing the energy fluctuation problem specifically in solar energy. However, the thermal conductivity of PCM is too low, which hinders TES and heat transfer rate. In recent days thermally enhanced PCMs are a promising candidate for TES and heat transfer applications. This research designates the review on various thermal conductivity and heat transfer enhancement techniques of PCMs like, increasing the heat transfer area, use of various highly conductive porous foam materials (copper, aluminium, nickel, graphite, and carbon), mix of materials, use of multiple PCM and nano dispersed PCM (Copper oxide (CuO), Aluminium dioxide (Al2O3), Carbon nanotubes (CNTs), graphene, etc.). Also, the long-term stability, phase segregation and super colling are extensively discussed. Furthermore, energy storage applications of highly conductive PCMs in advanced fields like solar thermal system, desalination units, pharmaceutical industry, fabrics, food processing, battery thermal management etc are discussed. It has been observed that porous materials/foam dispersed PCM had better heat transfer/storage capacity (thermal conductivity 2–500 times more). In addition, organic PCMs have been widely used, due to its long-term stability, low or no supercooling, less or no corrosion, and recyclability. The highly stable thermally enhanced PCMs are used for long-term TES/heat transfer applications.

energy & fuels,green & sustainable science & technology
Morphological characterization and applications of phase change materials in thermal energy storage: A review

Xiang Huang,Guruprasad Alva,Yuting Jia,Guiyin Fang

DOI: https://doi.org/10.1016/j.rser.2017.01.048

IF: 16.799

2017-01-01

Renewable and Sustainable Energy Reviews

Abstract:Phase change material (PCM), stores and releases heat at a particular required temperature as it undergoes phase change at that temperature. Because of their large latent heat and constant temperature during the phase change process, the PCMs are extensively used in latent thermal energy storage system (LTES) and thermal management system (TM). Due to its virtue of competitive performance, PCM has been used extensively in heat recovery, solar energy, aerospace industry, buildings, textile industry etc. However, the PCM has limitations like low thermal conductivity and low heat transfer rate, which decrease the performance of LTES and TM systems. In this work, ways of improving thermal conductivity and heat transfer rate of the composite PCMs (CPCMs) are summarized from perspective of three kinds of CPCMs’ morphologies (fiber, porosity and sphere). This review paper presents morphological characterization of the CPCMs, and several fabrication methods of the CPCMs with enhanced thermal properties.
Thermal conductivity enhancement on phase change materials for thermal energy storage: A review

Shaofei Wu,Ting Yan,Zihan Kuai,Weiguo Pan

DOI: https://doi.org/10.1016/j.ensm.2019.10.010

IF: 20.4

2020-03-01

Energy Storage Materials

Abstract:Phase change energy storage technology, which can solve the contradiction between the supply and demand of thermal energy and alleviate the energy crisis, has aroused a lot of interests in recent years. Due to its high energy density, high temperature and strong stability of energy output, phase change material (PCM) has been widely used in thermal energy systems. The aim of this review is to provide an insight into the thermal conduction mechanism of phonons in PCM and the morphology, preparation method as well as thermal conductivity of composite PCMs. Phonon thermal conduction mechanism is suggested to cover three forms: phonon-phonon scattering, phonon-defect scattering and phonon-boundary scattering. Then the microcosmic factors affecting the thermal conductivity of composite PCMs are analyzed. The research progress of adding three-dimensional, two-dimensional, one-dimensional and zero-dimensional structure additives to PCM is reviewed. Besides summarizing the preparation method and microstructure, the thermal conductivity of the composite PCMs are also analyzed from the aspect of phonon thermal conductivity mechanism. Meanwhile, some novel materials, including metal organic frameworks (MOFs), titanium dioxide foam, highly graphitized network carbon, graphene foam and hexagonal boron nitride (HBN) nanoparticles, are proposed for the additives of heat storage materials. Ongoing research and development studies indicate that the challenges of the improving the thermal conductivity of PCM focus on the aspects of clarifying the phonon scattering mechanism in PCM, increasing the number of thermal conductivity chains and broadening the thermal transmission channels. Booming progress illustrates that the exploration of high performance PCM is an extremely valuable and scalable option for storing industrial waste heat and solar energy, especially for constant temperature storage and utilization. To bring the phase change heat storage solution into a broader market, more intensive studies in fields of phonon thermal conductivity mechanism, development of high performance composite PCMs and efficient and compact phase change heat storage system are still required.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

[Electroencephalography and cognitive processes in schizophrenia].

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Review on the thermal property enhancement of inorganic salt hydrate phase change materials

Inorganic salt based shape-stabilized composite phase change materials for medium and high temperature thermal energy storage: Ingredients selection, fabrication, microstructural characteristics and development, and applications

Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion

Nano additive enhanced salt hydrate phase change materials for thermal energy storage

Carbon-Filled Organic Phase-Change Materials for Thermal Energy Storage: A Review

CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification

Heat transfer characteristics and compatibility of molten salt/ceramic porous composite phase change material

Enhanced thermal performance of NaCH3COO·3H2O-Na2S2O3·5H2O eutectic based composite phase change materials with hybrid dimensional carbon nanomaterials and modified lotus root starch

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Review on Thermal Conductivity Improvement of Phase Change Materials with Enhanced Additives for Thermal Energy Storage

Experimental investigation on the performance of binary carbon-based nano-enhanced inorganic phase change materials for thermal energy storage applications

Review on Thermal Conductivity Enhancement, Thermal Properties and Applications of Phase Change Materials in Thermal Energy Storage

Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite Phase Change Material

Review on Thermal Performances and Applications of Thermal Energy Storage Systems with Inorganic Phase Change Materials

Salt hydrate phase change materials: Current state of art and the road ahead

Role of phase change materials in thermal energy storage: Potential, recent progress and technical challenges

Morphological characterization and applications of phase change materials in thermal energy storage: A review

Thermal conductivity enhancement on phase change materials for thermal energy storage: A review