Utilization of soy protein isolate and konjac blends in a low-fat bologna (model system).

K. Chin,J. T. Keeton,M. Longnecker,J. W. Lamkey

DOI: https://doi.org/10.1016/S0309-1740(99)00035-2

IF: 7.077

1999-09-01

Meat Science

Abstract:

What problem does this paper attempt to address?

A hybrid‐ensemble model for software defect prediction for balanced and imbalanced datasets using AI‐based techniques with feature preservation: SMERKP‐XGB

Mohd Mustaqeem,Tamanna Siddiqui,Suhel Mustajab

DOI: https://doi.org/10.1002/smr.2731

2024-09-19

Journal of Software Evolution and Process

Abstract:SMERKP‐XGB represents a hybrid‐ensemble model for software defect prediction for balanced and imbalanced datasets using artificial intelligence ‐based techniques with feature preservation. Maintaining software quality is a significant challenge as the complexity of software is increasing with the rise of the software industry. Software defects are a primary concern in complex modules, and predicting them in the early stages of the software development life cycle (SDLC) is difficult. Previous techniques to address this issue have not been very promising. We have proposed "A hybrid ensemble model for software defect prediction using AI‐based techniques with feature preservation" to overcome this problem. We have used the National Aeronautics and Space Administration (NASA) dataset from the PROMISE repository for testing and validation. By applying exploratory data analysis (EDA), feature engineering, scaling, and standardization, we found that the dataset is imbalanced, which can negatively affect the model's performance. To address this, we have used the Synthetic Minority Oversampling (SMOTE) technique and the edited nearest neighbor (ENN) (SMOTE‐ENN). We have also used recursive feature elimination cross‐validation (RFE‐CV) with a pipeline to prevent data leaking in CV and kernel‐based principal component analysis (K‐PCA) to minimize dimensionality and selectively relevant features. The reduced dimensional data is then given to the eXtreme Gradient Boosting (XGBoost) for classification, resulting in the hybrid‐ensemble (SMERKP‐XGB) model. The proposed SMERKP‐XGB model is better than previously developed models in terms of accuracy (CM1: 97.53%, PC1: 92.05%, and PC2: 97.45%, KC1:95.65%), and area under the receiver operating characteristic curve values (CM1:96.30%, PC1:98.30%, and PC2:99.30%: KC1: 93.54) and other evaluation criteria mentioned in the literature.

computer science, software engineering
HYDRA: Massively Compositional Model for Cross-Project Defect Prediction

Xin Xia,David Lo,Sinno Jialin Pan,Nachiappan Nagappan,Xinyu Wang

DOI: https://doi.org/10.1109/tse.2016.2543218

IF: 7.4

2016-01-01

IEEE Transactions on Software Engineering

Abstract:Most software defect prediction approaches are trained and applied on data from the same project. However, often a new project does not have enough training data. Cross-project defect prediction, which uses data from other projects to predict defects in a particular project, provides a new perspective to defect prediction. In this work, we propose a HYbrid moDel Reconstruction Approach (HYDRA) for cross-project defect prediction, which includes two phases: genetic algorithm (GA) phase and ensemble learning (EL) phase. These two phases create a massive composition of classifiers. To examine the benefits of HYDRA, we perform experiments on 29 datasets from the PROMISE repository which contains a total of 11,196 instances (i.e., Java classes) labeled as defective or clean. We experiment with logistic regression as the underlying classification algorithm of HYDRA. We compare our approach with the most recently proposed cross-project defect prediction approaches: TCA+ by Nam et al., Peters filter by Peters et al., GP by Liu et al., MO by Canfora et al., and CODEP by Panichella et al. Our results show that HYDRA achieves an average F1-score of 0.544. On average, across the 29 datasets, these results correspond to an improvement in the F1-scores of 26.22, 34.99, 47.43, 28.61, and 30.14 percent over TCA+, Peters filter, GP, MO, and CODEP, respectively. In addition, HYDRA on average can discover 33 percent of all bugs if developers inspect the top 20 percent lines of code, which improves the best baseline approach (TCA+) by 44.41 percent. We also find that HYDRA improves the F1-score of Zero-R which predict all the instances to be defective by 5.42 percent, but improves Zero-R by 58.65 percent when inspecting the top 20 percent lines of code. In practice, Zero-R can be hard to use since it simply predicts all of the instances to be defective, and thus developers have to inspect all of the instances to find the defective ones. Moreover, we notice the improvement of HYDRA over other baseline approaches in terms of F1-score and when inspecting the top 20 percent lines of code are substantial, and in most cases the improvements are significant and have large effect sizes across the 29 datasets.
A Hybrid Sampling and Multi-Objective Optimization Approach for Enhanced Software Defect Prediction

Jie Zhang,Dongcheng Li,W. Eric Wong,Shengrong Wang

2024-10-14

Abstract:Accurate early prediction of software defects is essential to maintain software quality and reduce maintenance costs. However, the field of software defect prediction (SDP) faces challenges such as class imbalances, high-dimensional feature spaces, and suboptimal prediction accuracy. To mitigate these challenges, this paper introduces a novel SDP framework that integrates hybrid sampling techniques, specifically Borderline SMOTE and Tomek Links, with a suite of multi-objective optimization algorithms, including NSGA-II, MOPSO, and MODE. The proposed model applies feature fusion through multi-objective optimization, enhancing both the generalization capability and stability of the predictions. Furthermore, the integration of parallel processing for these optimization algorithms significantly boosts the computational efficiency of the model. Comprehensive experiments conducted on datasets from NASA and PROMISE repositories demonstrate that the proposed hybrid sampling and multi-objective optimization approach improves data balance, eliminates redundant features, and enhances prediction accuracy. The experimental results also highlight the robustness of the feature fusion approach, confirming its superiority over existing state-of-the-art techniques in terms of predictive performance and applicability across diverse datasets.

Software Engineering
Hybrid deep architecture for software defect prediction with improved feature set

C. Shyamala,S. Mohana,M. Ambika,K. Gomathi

DOI: https://doi.org/10.1007/s11042-024-18456-w

IF: 2.577

2024-02-18

Multimedia Tools and Applications

Abstract:The software Defect Prediction (SDP) model uses previously learned data to predict whether a future example (such as a file, class, or module) will be defective or not. Accurate forecast results can help software testers arrange testing resources more efficiently. Nonetheless, there are still difficulties in more exact and reliable defect predictions. This study presents the SDP-CMPOA framework, which stands for Software Defect Prediction Crossover with Brownian Motion-based Pelican Optimization Algorithm. The stages of the approach are pre-processing, feature extraction, feature selection, and detection. The preprocessing stage involves improved data normalization. Higher-order statistical features, enhanced statistical features, and raw features are all taken from the pre-processed data. The primary barrier to precise software defect detection and hence adhering to the ideal feature selection method will be the curse of dimensionality. This research proposes a novel Crossover with the Brownian motion-based Pelican Optimization Algorithm for selecting the best features (CMPOA). Finally, hybrid classifiers like Improved Bidirectional Long Short Term Memory (Bi-LSTM and) Deep Max out models are employed for defect prediction. The classifier analysis of KCI/SDP dataset accuracy of the projected model is 9.17%, 9.6%, 7.20%, 13.3%, and 5.7% better than the other methods such as DBN, SVM, CNN, RF, RNN, and SDP- CMPOA respectively at the 60th learning percentage. The efficiacy of the SDP-CMPOA is examined in comparison to other extant schemes with respect to certain measures.

computer science, information systems, theory & methods,engineering, electrical & electronic, software engineering
Performance evaluation of software defect prediction with NASA dataset using machine learning techniques

Tamanna Siddiqui,Mohd Mustaqeem

DOI: https://doi.org/10.1007/s41870-023-01528-9

2023-10-04

International Journal of Information Technology

Abstract:The software industry’s growth and increasing complexity have made software maintenance more challenging, with Software Defects (SD) being a significant contributor to quality degradation leading to resource wastage in terms of effort, time, and finances. If the SD is not considered in the early stages of software development, it occurs in any stage of the Software Development Life Cycle (SDLC). The proposed study focuses on improving software quality through Software Defect Prediction (SDP) using machine learning (ML) and data balancing techniques. To mitigate the problem of imbalanced datasets, which often lead to model overfitting, the authors employ the Synthetic Minority Oversampling Technique (SMOTE) combined with ML approaches. The assessment encompasses various ML techniques, including Random Forest, SVM, KNN, and LDA, on the balanced CM1 dataset of the NASA promise repository and evaluated performance using accuracy, precision, recall, F1-score, and AUC-ROC. Random Forest emerges as a standout performer, with an accuracy of 98.09% and an F1-score of 97.25%. SVM and KNN also demonstrate high accuracy rates of 97.71% and 97.56%, respectively, while LDA shows balanced performance with an accuracy of 96.04% and an F1-score of 95.93%. Notably, our study achieves significant performance improvements compared with the prior state-of-the-art. The author provides a roadmap to achieve improved performance and predictive capabilities in SDP, highlighting the novel contribution of the proposed study. These findings hold great potential for the software industry, offering solutions to enhance software quality and streamline development.
Software defect prediction employing BiLSTM and BERT-based semantic feature

Md Nasir Uddin,Bixin Li,Zafar Ali,Pavlos Kefalas,Inayat Khan,Islam Zada

DOI: https://doi.org/10.1007/s00500-022-06830-5

IF: 3.732

2022-02-21

Soft Computing

Abstract:Recent years, software defect prediction systems are becoming quite popular since they improve software reliability by identifying the potential bugs in the code. Several models were introduced in literature that aim to support the developers. Unfortunately, these models consider the manually constructed code features and input into machine learning-based classifiers. Moreover, these baseline approaches ignore the semantic and contextual information of the source code. With this paper we present a software defect prediction model that address all these issues. The model employs bidirectional long-short term memory network (BiLSTM) and BERT-based semantic feature (SDP-BB) that captures the semantic features of code to predict defects in the corresponding software. In particular, it utilizes the BiLSTM to exploit contextual information from the embedded token vectors learned through BERT model. Moreover, it utilizes an attention mechanism to capture salient features of the nodes. This is done through a data augmentation technique for generating more training data. We evaluated our approach against state-of-the-art models using ten open-source projects in terms of F1-score in fault prediction. The experiments evaluated the performance of full-token and AST-node data processing methods conducting the length of coverage on each project from 50 to 90% in both within-project defect prediction (WPDP) and cross-project defect prediction (CPDP) experiments. The results indicate that the proposed method outperforms competing models.

computer science, artificial intelligence, interdisciplinary applications
IMDAC: A robust intelligent software defect prediction model via multi‐objective optimization and end‐to‐end hybrid deep learning networks

Kun Zhu,Nana Zhang,Changjun Jiang,Dandan Zhu

DOI: https://doi.org/10.1002/spe.3274

2023-09-30

Software Practice and Experience

Abstract:Software defect prediction (SDP) aims to build an effective prediction model for historical defect data from software repositories by some specialized techniques or algorithms, and predict the defect proneness of new software modules. Nevertheless, the complex internal intrinsic structure hidden behind the defect data makes it challenging for the built prediction model to capture the most expressive defect feature representations, and largely limits the SDP performance. Fortunately, artificial intelligence is interacting closely with humans and provides powerful intelligent technical support for addressing these SDP issues. In this article, we propose a robust intelligent SDP model called IMDAC based on deep learning and soft computing techniques. This model has three main advantages: (1) an effective deep generative network—InfoGAN (information maximizing GANs) is employed to conduct data augmentation, namely generating sufficient defect instances and achieving defect class balance simultaneously. (2) Select the fewest representative feature subset for the minimum error via an advanced multi‐objective optimization approach—MSEA (multi‐stage evolutionary algorithm). (3) Build a powerful end‐to‐end deep defect predictor by hybrid deep learning techniques—DAE (Denoising AutoEncoder) and CNN (convolutional neural network), which can not only reconstruct a clean "repaired" input with strong robustness and generalization capabilities via DAE, but also learn the abstract deep semantic features with strong discriminating capability via CNN. Experimental results verify the superiority and robustness of the IMDAC model across 15 software projects.

computer science, software engineering
[Labelling of essential amino acid residues of pig heart lactate dehydrogenase with (carbonyl-14C)3-(2-bromoacetyl) pyridine].

C. Woenckhaus,J. Berghäuser,G. Pfleiderer

1969-04-01

Hoppe-Seyler´s Zeitschrift für physiologische Chemie

Abstract:
Combined Classifier for Cross-Project Defect Prediction: an Extended Empirical Study.

Yun Zhang,David Lo,Xin Xia,Jianling Sun

DOI: https://doi.org/10.1007/s11704-017-6015-y

IF: 2.6688

2018-01-01

Frontiers of Computer Science

Abstract:To facilitate developers in effective allocation of their testing and debugging efforts, many software defect prediction techniques have been proposed in the literature. These techniques can be used to predict classes that are more likely to be buggy based on the past history of classes, methods, or certain other code elements. These techniques are effective provided that a sufficient amount of data is available to train a prediction model. However, sufficient training data are rarely available for new software projects. To resolve this problem, cross-project defect prediction, which transfers a prediction model trained using data from one project to another, was proposed and is regarded as a new challenge in the area of defect prediction. Thus far, only a few cross-project defect prediction techniques have been proposed. To advance the state of the art, in this study, we investigated seven composite algorithms that integrate multiple machine learning classifiers to improve cross-project defect prediction. To evaluate the performance of the composite algorithms, we performed experiments on 10 open-source software systems from the PROMISE repository, which contain a total of 5,305 instances labeled as defective or clean. We compared the composite algorithms with the combined defect predictor where logistic regression is used as the meta classification algorithm (CODEP (Logistic) ), which is the most recent cross-project defect prediction algorithm in terms of two standard evaluation metrics: cost effectiveness and F-measure. Our experimental results show that several algorithms outperform CODEP (Logistic) : Maximum voting shows the best performance in terms of F-measure and its average F-measure is superior to that of CODEP (Logistic) by 36.88%. Bootstrap aggregation (Bagging (J48)) shows the best performance in terms of cost effectiveness and its average cost effectiveness is superior to that of CODEP (Logistic) by 15.34%.
Improved mayfly optimization deep stacked sparse auto encoder feature selection scorched gradient descent driven dropout XLM learning framework for software defect prediction

M. Anbu

DOI: https://doi.org/10.1002/cpe.7240

2022-08-05

Concurrency and Computation: Practice and Experience

Abstract:Summary Software testing is the process of improving software quality by classifying and removing defects in the software development. Previously, several methods were used for software defect prediction, but any one method did not provide sufficient accuracy. To overcome this issue, an improved may fly optimization with deep stacked sparse auto encoder feature selection scorched gradient descent driven dropout extreme learning machine framework (SDP‐IMFOFS‐GDDDXLMC) is proposed in this article for software defect prediction. Here, an IMFO method is considered for feature selection techniques. In feature selection technique, features are selected, such as PC1, PC4, and MC1 for selecting the probable minimal attribute. Then, GDDDXLMC approach is used to classify buggy and clean software detection. The proposed approach is implemented in MATLAB platform. The performance metrics, such as accuracy, precision, F‐measure, sensitivity, specificity, Mathew correlation coefficient (MCC) is examined to examine the performance of the proposed method. The simulation performance of the proposed SDP‐IMFOFS‐GDDDXLMC method attains higher accuracy 99.75%, 97.85%, 95.13%, 14.89%, 16.34%, 17.89%, and 98.79, higher sensitivity 96.34%, 91.23%, 89.12%, 12.67%, 17.56%, 18.90%, and 87.25% higher specificity 14.89%, 16.89%, 20.67%, 93.67%, 92.37%, 98.47%, and 94.78% compared with the existing methods, like SDP‐MLP‐PSO, SDP‐BPNN‐RBFNN, SDP‐CNN‐RNN‐LSTM, SDP‐KBN‐LIME, SDP‐SLDeep‐LSTM, SDP‐K‐PCA‐ELM, and SDP‐CNN‐PHI forest, respectively.
An Approach to Semantic and Structural Features Learning for Software Defect Prediction

Shi Meilong,Peng He,Haitao Xiao,Huixin Li,Cheng Zeng

DOI: https://doi.org/10.1155/2020/6038619

IF: 1.43

2020-04-06

Mathematical Problems in Engineering

Abstract:Research on software defect prediction has achieved great success at modeling predictors. To build more accurate predictors, a number of hand-crafted features are proposed, such as static code features, process features, and social network features. Few models, however, consider the semantic and structural features of programs. Understanding the context information of source code files could explain a lot about the cause of defects in software. In this paper, we leverage representation learning for semantic and structural features generation. Specifically, we first extract token vectors of code files based on the Abstract Syntax Trees (ASTs) and then feed the token vectors into Convolutional Neural Network (CNN) to automatically learn semantic features. Meanwhile, we also construct a complex network model based on the dependencies between code files, namely, software network (SN). After that, to learn the structural features, we apply the network embedding method to the resulting SN. Finally, we build a novel software defect prediction model based on the learned semantic and structural features (SDP-S2S). We evaluated our method on 6 projects collected from public PROMISE repositories. The results suggest that the contribution of structural features extracted from software network is prominent, and when combined with semantic features, the results seem to be better. In addition, compared with the traditional hand-crafted features, the F -measure values of SDP-S2S are generally increased, with a maximum growth rate of 99.5%. We also explore the parameter sensitivity in the learning process of semantic and structural features and provide guidance for the optimization of predictors.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Software defect prediction using a bidirectional LSTM network combined with oversampling techniques

Nasraldeen Alnor Adam Khleel,Károly Nehéz

DOI: https://doi.org/10.1007/s10586-023-04170-z

2023-10-28

Cluster Computing

Abstract:Abstract Software defects are a critical issue in software development that can lead to system failures and cause significant financial losses. Predicting software defects is a vital aspect of ensuring software quality. This can significantly impact both saving time and reducing the overall cost of software testing. During the software defect prediction (SDP) process, automated tools attempt to predict defects in the source codes based on software metrics. Several SDP models have been proposed to identify and prevent defects before they occur. In recent years, recurrent neural network (RNN) techniques have gained attention for their ability to handle sequential data and learn complex patterns. Still, these techniques are not always suitable for predicting software defects due to the problem of imbalanced data. To deal with this problem, this study aims to combine a bidirectional long short-term memory (Bi-LSTM) network with oversampling techniques. To establish the effectiveness and efficiency of the proposed model, the experiments have been conducted on benchmark datasets obtained from the PROMISE repository. The experimental results have been compared and evaluated in terms of accuracy, precision, recall, f-measure, Matthew’s correlation coefficient (MCC), the area under the ROC curve (AUC), the area under the precision-recall curve (AUCPR) and mean square error (MSE). The average accuracy of the proposed model on the original and balanced datasets (using random oversampling and SMOTE) was 88%, 94%, And 92%, respectively. The results showed that the proposed Bi-LSTM on the balanced datasets (using random oversampling and SMOTE) improves the average accuracy by 6 and 4% compared to the original datasets. The average F-measure of the proposed model on the original and balanced datasets (using random oversampling and SMOTE) were 51%, 94%, And 92%, respectively. The results showed that the proposed Bi-LSTM on the balanced datasets (using random oversampling and SMOTE) improves the average F-measure by 43 and 41% compared to the original datasets. The experimental results demonstrated that combining the Bi-LSTM network with oversampling techniques positively affects defect prediction performance in datasets with imbalanced class distributions.

computer science, information systems, theory & methods
SDP-MTF: A Composite Transfer Learning and Feature Fusion for Cross-Project Software Defect Prediction

Tianwei Lei,Jingfeng Xue,Duo Man,Yong Wang,Minghui Li,Zixiao Kong

DOI: https://doi.org/10.3390/electronics13132439

IF: 2.9

2024-06-22

Electronics

Abstract:Software defect prediction is critical for improving software quality and reducing maintenance costs. In recent years, Cross-Project software defect prediction has garnered significant attention from researchers. This approach leverages transfer learning to apply the knowledge from existing projects to new ones, thereby enhancing the universality of predictive models. It provides an effective solution for projects with limited historical defect data. Nevertheless, current methodologies face two main challenges: first, the inadequacy of feature information mining, where code statistical information or semantic information is used in isolation, ignoring the benefits of their integration; second, the substantial feature disparity between different projects, which can lead to insufficient effect during transfer learning, necessitating additional efforts to narrow this gap to improve precision. Addressing these challenges, this paper proposes a novel methodology, SDP-MTF (Software Defect Prediction using Multi-stage Transfer learning and Feature fusion), that combines code statistical features, deep semantic features, and multiple feature transfer learning methods to enhance the predictive effect. The SDP-MTF method was empirically tested on single-source cross-project software defect prediction across six projects from the PROMISE dataset, benchmarked against five baseline algorithms that employ distinct features and transfer methodologies. Our findings indicate that SDP-MTF significantly outperforms five classical baseline algorithms, improving the F1-Score by 8% to 15.2%, thereby substantively advancing the precision of cross-project software defect prediction.

engineering, electrical & electronic,computer science, information systems,physics, applied
Software Defect Prediction Using Deep Q‐Learning Network‐Based Feature Extraction

Qinhe Zhang,Jiachen Zhang,Tie Feng,Jialang Xue,Xinxin Zhu,Ningyang Zhu,Zhiheng Li

DOI: https://doi.org/10.1049/2024/3946655

2024-06-04

IET Software

Abstract:Machine learning‐based software defect prediction (SDP) approaches have been commonly proposed to help to deliver high‐quality software. Unfortunately, all the previous research conducted without effective feature reduction suffers from high‐dimensional data, leading to unsatisfactory prediction performance measures. Moreover, without proper feature reduction, the interpretability and generalization ability of machine learning models in SDP may be compromised, hindering their practical utility in diverse software development environments. In this paper, an SDP approach using deep Q‐learning network (DQN)‐based feature extraction is proposed to eliminate irrelevant, redundant, and noisy features and improve the classification performance. In the data preprocessing phase, the undersampling method of BalanceCascade is applied to divide the original datasets. As the first step of feature extraction, the weight ranking of all the metric elements is calculated according to the expected cross‐entropy. Then, the relation matrix is constructed by applying random matrix theory. After that, the reward principle is defined for computing the Q value of Q‐learning based on weight ranking, relation matrix, and the number of errors, according to which a convolutional neural network model is trained on datasets until the sequences of metric pairs are generated for all datasets acting as the revised feature set. Various experiments have been conducted on 11 NASA and 11 PROMISE repository datasets. Sensitive analysis experiments show that binary classification algorithms based on SDP approaches using the DQN‐based feature extraction outperform those without using it. We also conducted experiments to compare our approach with four state‐of‐the‐art approaches on common datasets, which show that our approach is superior to these methods in precision, F‐measure, area under receiver operating characteristics curve, and Matthews correlation coefficient values.

computer science, software engineering
Enhancing trustworthiness and reliability: advance explainable artificial intelligence framework for real world Sclerosis detection

Tanzila Saba,Muhammad Mujahid,Amjad Rehman,Faten S. Alamari,Noor Ayesha

DOI: https://doi.org/10.1088/1402-4896/ad72b0

2024-08-25

Physica Scripta

Abstract:In this era, Explainable Artificial Intelligence (XAI) is being employed in many health-related problems, but it faces challenges because most models produce results that are opaque and interpretable. The goal of explainable AI is to make machine learning, and deep learning models more understandable and accessible to people. Consequently, there is a pressing need for XAI models to enhance trust, given its increasing popularity in the field of medical artificial intelligence. This study explores the XAI nature of machine learning for disease prediction, with a particular focus on transparency and reliability of the results. The study examines the interpretability of artificial intelligence, focusing on issues such as bias, equality, and system reliability. The main theme is to minimize errors, disparities in human understanding, and use artificial intelligence in disease prediction to improve the outcomes for medical patients. The XAI methods were validated on Sclerosis predictions using two important models with fine-tuning their hyperparameters. The experiments demonstrated that the XAI methods outperformed the existing methods, achieving impressive results in terms of accuracy, recall, f1 score, precision, and AUC. The proposed approach achieved 98.53% accuracy using 75-25% hold-out splitting, and 98.14% accuracy using 10-fold validation. This semantic approach is superior to previous methods by showing the abundance of correct predictions and demonstrating its effectiveness in predicting multiple sclerosis in the real world.

physics, multidisciplinary
Static code metrics-based deep learning architecture for software fault prediction

Somya Goyal

DOI: https://doi.org/10.1007/s00500-022-07365-5

IF: 3.732

2022-08-11

Soft Computing

Abstract:Software fault prediction (SFP) refers to the early prediction of fault-prone modules in software development which are susceptible to faults and can incur high development cost. Machine learning (ML)-based classifiers are extensively being used for SFP. Machine learning models utilize handcrafted metrics (or features), i.e., static code metrics for classification of software modules into one of the two categories, i.e., {buggy, clean}. It involves overhead of selecting the most significant features due to the presence of some correlated or non-significant features. With the shifting paradigm of machine learning to deep learning, it is desirable to improve the performance of SFP classifiers to keep pace up with the changing industrial needs. This study proposes a novel model (SCM-DLA-SFP) based on deep learning architecture (DLA) to predict the defects utilizing the static code metrics (SCMs). The defect dataset with SCMs is fed to the input layer of specially designed deep learning model, where the input is automatically conditioned using normalization. Then, the conditioned data pass through dense layers of deep neural network architecture to predict the faulty modules. The study utilizes five datasets from PROMISE repository namely camel, jedit, lucene, synapse and xalan. The proposed model SCM-DLA-SFP exhibits the performance of the average values of 88.01%, 79.83%, and 73.3% for AUC measure, accuracy criteria and F-measure, respectively. The comparison shows that proposed model is better on average than the state-of-the-art DL-based SFP methods by 16.28%, 19.61%, and 18.45% over AUC, accuracy and F-measure, respectively.

computer science, artificial intelligence, interdisciplinary applications
Multi-Objective Software Defect Prediction via Multi-Source Uncertain Information Fusion and Multi-Task Multi-View Learning

Minghao Yang,Shunkun Yang,W. Eric Wong

DOI: https://doi.org/10.1109/tse.2024.3421591

IF: 7.4

2024-08-18

IEEE Transactions on Software Engineering

Abstract:Effective software defect prediction (SDP) is important for software quality assurance. Numerous advanced SDP methods have been proposed recently. However, how to consider the task correlations and achieve multi-objective SDP accurately and efficiently still remains to be further explored. In this paper, we propose a novel multi-objective SDP method via multi-source uncertain information fusion and multi-task multi-view learning (MTMV) to accurately and efficiently predict the proneness, location, and type of defects. Firstly, multi-view features are extracted from multi-source static analysis results, reflecting uncertain defect location distribution and semantic information. Then, a novel MTMV model is proposed to fully fuse the uncertain defect information in multi-view features and realize effective multi-objective SDP. Specifically, the convolutional GRU encoders capture the consistency and complementarity of multi-source defect information to automatically filter the noise of false and missed alarms, and reduce location and type uncertainty of static analysis results. A global attention mechanism combined with the hard parameter sharing in MTMV fuse features according to their global importance of all tasks for balanced learning. Then, considering the latent task and feature correlations, multiple task-specific decoders jointly optimize all SDP tasks by sharing the learning experience. Through the extensive experiments on 14 datasets, the proposed method significantly improves the prediction performance over 12 baseline methods for all SDP objectives. The average improvements are 30.7%, 31.2%, and 32.4% for defect proneness, location, and type prediction, respectively. Therefore, the proposed multi-objective SDP method can provide more sufficient and precise insights for developers to significantly improve the efficiency of software analysis and testing.

engineering, electrical & electronic,computer science, software engineering
LCNN: Lightweight CNN Architecture for Software Defect Feature Identification Using Explainable AI

Momotaz Begum,Mehedi Hasan Shuvo,Mostofa Kamal Nasir,Amran Hossain,Mohammad Jakir Hossain,Imran Ashraf,Jia Uddin,Md. Abdus Samad

DOI: https://doi.org/10.1109/access.2024.3388489

IF: 3.9

2024-04-27

IEEE Access

Abstract:Software defect identification (SDI) is a key part of improving the quality of software projects and lowering the risks that along with maintenance. It does identify the software defect causes that have not been reached yet to get sufficient results. On the other hand, many researchers have recently developed several models, including NN, ML, DL, advanced CNN, and LSTM, to enhance the effectiveness of defect prediction. Due to an insufficient dataset size, repeated investigations, and no longer appropriate baseline selection, the research on the CNN model was unable to produce reliable results. In addition, XAI a well-known explainability approach creates deep models in computer vision, as well as successfully handles the software defect prediction that is easy for humans to understand. To address these issues, firstly we have used SMOTE for preprocessing which was collected from the NASA repository; categorical and numerical data. Secondly, we have experimented with software defect prediction using 1D-CNN and 2D-CNN named lightweight CNN (LCNN). Subsequently, evaluation we have employed a 100-repetition holdout validation. For the cross-validation setup, we utilized the 1D-CNN model was , and for the 2D-CNN model, it was . After that, the results of the experiment were compared and assessed in terms of accuracy, MSE, and AUC. The result shows that 2D-CNN shows 1.36% better contrast with 1D-CNN. Thirdly, we have conducted research on the identification of software defect features via LIME and SHAP in XAI stand as state-of-the-art techniques. However, we cannot use 2D-CNN because it involves more complex relationships, making it challenging to create transparent explanations. That is why we have realized that 1D-CNN will superior result to explain the root cause of software feature identifications. Finally, LIME provides accurate visualization of software defect features in contrast with SHAP, as well as it helps the stakeholders of the software industry easily find actual root causes of software defect identification.

computer science, information systems,telecommunications,engineering, electrical & electronic
Use of Deep Learning Model with Attention Mechanism for Software Fault Prediction

Ting-Yan Yu,Chin-Yu Huang,Neil C. Fang

DOI: https://doi.org/10.1109/dsa52907.2021.00025

2021-08-01

Abstract:Software defect prediction is a skill in software engineering that can increase program reliability. In the past, most defect prediction studies have been based on size and complexity metrics. In recent years, machine learning based predictive studies have been conducted. To build an accurate prediction model, choosing effective features remains critical. In this paper, we constructed a deep learning model called Defect Prediction via Self-Attention mechanism (DPSAM) to extract semantic features and predict defects automatically. We transferred programs into abstract syntax trees (ASTs) and encoded them into token vectors. With input features, we trained a self-attention mechanism to extract semantic features of programs and predict defects. We evaluated performance on 7 open source projects. In Within-Project Defect Prediction (WPDP), DPSAM achieved 16.8% and 14.4% performance improvement compared to state-of-the-art deep belief network (DBN)-based method and defect prediction via convolutional neural network (DP-CNN)-based method in F1 score, respectively. Besides, in Cross-Project Defect Prediction (CPDP), DPSAM achieve 23% and 60% performance improvement in F1 score compared to DBN-based method and DP-CNN-based method.
Hybrid Optimization-Based Neural Network Classifier for Software Defect Prediction

M. Prashanthi,M. Chandra Mohan

DOI: https://doi.org/10.1142/s0219467824500451

2023-06-07

International Journal of Image and Graphics

Abstract:The software is applied in various areas so the quality of the software is very important. The software defect prediction (SDP) is used to solve the software issues and enhance the quality. The robustness and reliability are the major concerns in the existing SDP approaches. Hence, in this paper, the hybrid optimization-based neural network (Optimized NN) is developed for the effective detection of the defects in the software. The two main steps involved in the Optimized NN-based SDP are feature selection and SDP utilizing Optimized NN. The data is fed forwarded to the feature selection module, where relief algorithm selects the significant features relating to the defect and no-defects. The features are fed to the SDP module, and the optimal tuning of NN classifier is obtained by the hybrid optimization developed by the integration of the social spider algorithm (SSA) and gray wolf optimizer (GWO). The comparative analysis of the developed prediction model reveals the effectiveness of the proposed method that attained the maximum accuracy of 93.64%, maximum sensitivity of 95.14%, maximum specificity of 99%, maximum [Formula: see text]-score of 93.53%, and maximum precision of 99% by considering the [Formula: see text]-fold.

Utilization of soy protein isolate and konjac blends in a low-fat bologna (model system).

A hybrid‐ensemble model for software defect prediction for balanced and imbalanced datasets using AI‐based techniques with feature preservation: SMERKP‐XGB

HYDRA: Massively Compositional Model for Cross-Project Defect Prediction

A Hybrid Sampling and Multi-Objective Optimization Approach for Enhanced Software Defect Prediction

Hybrid deep architecture for software defect prediction with improved feature set

Performance evaluation of software defect prediction with NASA dataset using machine learning techniques

Software defect prediction employing BiLSTM and BERT-based semantic feature

IMDAC: A robust intelligent software defect prediction model via multi‐objective optimization and end‐to‐end hybrid deep learning networks

[Labelling of essential amino acid residues of pig heart lactate dehydrogenase with (carbonyl-14C)3-(2-bromoacetyl) pyridine].

Combined Classifier for Cross-Project Defect Prediction: an Extended Empirical Study.

Improved mayfly optimization deep stacked sparse auto encoder feature selection scorched gradient descent driven dropout XLM learning framework for software defect prediction

An Approach to Semantic and Structural Features Learning for Software Defect Prediction

Software defect prediction using a bidirectional LSTM network combined with oversampling techniques

SDP-MTF: A Composite Transfer Learning and Feature Fusion for Cross-Project Software Defect Prediction

Software Defect Prediction Using Deep Q‐Learning Network‐Based Feature Extraction

Enhancing trustworthiness and reliability: advance explainable artificial intelligence framework for real world Sclerosis detection

Static code metrics-based deep learning architecture for software fault prediction

Multi-Objective Software Defect Prediction via Multi-Source Uncertain Information Fusion and Multi-Task Multi-View Learning

LCNN: Lightweight CNN Architecture for Software Defect Feature Identification Using Explainable AI

Use of Deep Learning Model with Attention Mechanism for Software Fault Prediction

Hybrid Optimization-Based Neural Network Classifier for Software Defect Prediction