Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Conductive PEDOT-Dominant Surface of Transparent Electrode Patch via Selective Phase Transfer for Efficient Flexible Photoelectronic Devices

Optimization of Fabrication Process of Stretchable, Transparent PEDOT:PSS Electrodes for Optoelectronic Applications

Recent Advances of PEDOT in Flexible Energy Conversion and Storage Devices

Rising advancements in the application of PEDOT:PSS as a prosperous transparent and flexible electrode material for solution-processed organic electronics

Highly Conductive Stretchable All‐Plastic Electrodes Using a Novel Dipping‐Embedded Transfer Method for High‐Performance Wearable Sensors and Semitransparent Organic Solar Cells

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Transfer-Printed PEDOT:PSS Electrodes Using Mild Acids for High Conductivity and Improved Stability with Application to Flexible Organic Solar Cells.

A Flexible Electrochromic Device Based on PEDOT: PSS Working in Visible and Infrared Band

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells

Transferrable, Large‐area and Highly Conductive PEDOT : PSS Film and Its Application for Flexible Thermoelectric Generators

Transfer-printing of patterned PEDOT:PSS structures for bendable, stretchable and biodegradable electronics

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Thermally Induced Phase Separation of the PEDOT:PSS Layer for Highly Efficient Laminated Polymer Light-Emitting Diodes

Photopatternable and Highly Conductive PEDOT:PSS Electrodes for Flexible Perovskite Light-Emitting Diodes

Ultrasmooth, highly conductive and transparent PEDOT:PSS/silver nanowire composite electrode for flexible organic light-emitting devices

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer Via a Simple Mechanical Pressure Treatment

Patterned PEDOT:PSS-Flexible Electrode Using Electrospinning Nano-Fiber Substrate with UV-Induced Selective Wettability

Preparation of Intrinsic Flexible Conductive PEDOT:PSS@ionogel Composite Film and Its Application for Touch Panel

PEDOT and PEDOT:PSS thin-film electrodes: patterning, modification and application in stretchable organic optoelectronic devices

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology