[Role of infection in delayed abortion and premature labor].

P. Sarfati,G. Pageaut,C. Gauthier

1968-12-15

Abstract:

What problem does this paper attempt to address?

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Yang Li,Huijie Zhao,Mujie Yang

DOI: https://doi.org/10.1016/j.jcis.2017.08.076

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:In this paper, a photocatalyst composed of TiO2 nanoparticles supported on the nanofibers of poly(methyl methacrylate) (PMMA) was successfully prepared by hydrothermally treating the electrospun PMMA nanofibers containing titanium n-butoxide precursor at 135°C for 8h. As-prepared composite was characterized by field-emission scanning electron microscopy, X-ray diffraction pattern, thermal gravimetric analysis and Brunauer–Emmett–Teller (BET) surface area measurements. It is revealed that high content (42%) of tetragonal anatase TiO2 nanoparticles are uniformly loaded on the PMMA nanofibers to constitute the composite (TiO2@PMMA) photocatalyst with BET surface area of 21.4m2g−1. The photocatalytic activity of TiO2@PMMA towards the degradation of methyl orange (MO), a model pollutant, has been investigated. It is observed that 0.1g of the composite could degrade 100mL of MO (10mg/L) completely within 50min under UV illumination, exhibiting a high catalytic activity. Moreover, the composite could be easily separated from the reaction system by filtration, and maintain high photocatalytic activity in five consecutive cycles of the degradation of MO, suggesting its potentials in recycling use. The work provides a new approach for the development of novel supported photocatalysts with high catalytic activity and good reusability.
Photo-Induced Charge Generation of TiO<sub>2</sub> Nanotube Modified with Polymer Containing C<sub>60</sub> under Irradiation of Visible Light and its Applications

Xiao Chun He,Meng Wang,Jian Xun Qiu,Xin Tao Zhang,Ming Jun Gao,Shi Sheng Lv,Xing Fa Ma,Guang Li

DOI: https://doi.org/10.4028/www.scientific.net/msf.898.2263

2017-01-01

Materials Science Forum

Abstract:Due to its excellent physical properties and inert chemical reaction activity of C60, it is possible to synthesize solution-processing polymer containing C60 utilizing the inclusive characteristics of polymer chain segment, and then to prepare organic/inorganic nanocomposites with enhanced some key properties. In order to harvest the visible light of TiO2 effectively the surface modification of TiO2 nanotube with polymer containing C60 was carried out in this study. A series of characterizations were performed by SEM (scanning electron microscopy), TEM (transmission electron microscopy), Fourier-Transform Infrared (FTIR) spectra, UV-Vis (Ultra-violet visible spectroscopy), XRD patterns analysis. The results showed that the UV-Vis of resulting nanocomposite was almost covered the whole region of visible light. The photoconductivity response to visible light with low-power were studied based on interdigital electrodes of Au on flexible PET (polyethylene terephthalate) film substrate with casting method. The results indicated that the photoresponses of two kinds of polymer containing C60 to weak visible light emerged photo-switching behavior, its recoverability was also rapidly, and the photoresponse of TiO2 nanotube modified with two kinds of polymer containing C60 to weak visible light also changed greatly. This illustrated that the organic-inorganic nanocomposites showed good activities to weak visible light. Photocatalytic efficiency was examined by selecting typical organic pollutants, some good results were obtained. It may develop organic-inorganic nanocomposites with external stimuli response, photocatalyst, et al.
Solvothermal synthesis of stable nanoporous polymeric bases-crystalline TiO2 nanocomposites: visible light active and efficient photocatalysts for water treatment.

Fujian Liu,Weiping Kong,Liang Wang,Iman Noshadi,Zhonghua Zhang,Chenze Qi

DOI: https://doi.org/10.1088/0957-4484/26/8/085705

IF: 3.5

2015-01-01

Nanotechnology

Abstract:Visible light active and stable nanoporous polymeric base-crystalline TiO2 nanocomposites were solvothermally synthesized from in situ copolymerization of divinylbenzene (DVB) with 1vinylimidazolate (VI) or 4-vinylpyridine (Py) in the presence of tetrabutyl titanate without the use of any other additives (PDVB-VI-TiO2-x, PDVB-Py-TiO2-x, where x stands for the molar ratio of TiO2 to VI or Py), which showed excellent activity with respect to catalyzing the degradation of organic pollutants of p-nitrophenol (PNP) and rhodamine-B (RhB). TEM and SEM images show that PDVB-VI-TiO2-x and PDVB-Py-TiO2-x have abundant nanopores, and TiO2 nanocrystals with a high degree of crystallinity were homogeneously embedded in the PDVB-VI-TiO2-x and PDVB-Py-TiO2-x, forming a stable ` brick-and-mortar' nanostructure. PDVB-VI and PDVB-Py supports act as the glue linking TiO2 nanocrystals to form nanopores and constraining the agglomeration of TiO2 nanocrystals. XPS spectra show evidence of unique interactions between TiO2 and basic sites in these samples. UV diffuse reflectance shows that PDVB-VI-TiO2-x and PDVB-Py-TiO2-x exhibit a unique response to visible light. Catalytic tests show that the PDVB-VI-TiO2-x and PDVB-Py-TiO2-x were active in catalyzing the degradation of PNP and RhB organic pollutants under visible light irradiation. The enhanced activities of the PDVB-VI-TiO2-x and PDVB-Py-TiO2-x were ascribed to synergistic effects between abundant nanopores and the unique optical adsorption of visible light in the samples.
3D MoS2@TiO2@poly(methyl Methacrylate) Nanocomposite with Enhanced Photocatalytic Activity.

Yang Li,Zhao Wang,Hujie Zhao,Xiaojun Huang,Mujie Yang

DOI: https://doi.org/10.1016/j.jcis.2019.09.074

IF: 9.9

2019-01-01

Journal of Colloid and Interface Science

Abstract:Formation of heterostructure and nanostructure is promising approach to improving the photocatalytic activity of TiO2 based photocatalysts. In this work, MoS2@TiO2@poly(methyl methacrylate) (PMMA) was prepared by freeze drying of hydrothermally treated electrospun PMMA nanofibers containing titanium n-butoxide and MoS2 nanosheets. As-prepared nanocomposite revealed a 3D nanofiber network structure with high specific surface (83.6 m2/g), in which MoS2 nanosheets loaded with TiO2 nanoparticles were distributed on the surface of PMMA fibers. MoS2@TiO2@PMMA showed better photocatalytic performance than MoS2@PMMA, TiO2@PMMA, MoS2@TiO2 and MoS2@P25@PMMA towards the photodegradation of methyl orange (MO) under UV illumination. Typically, MoS2@TiO2@PMMA (100 mg) could degrade MO (10 mg/L, 100 mL) completely in 40 min under UV irradiation, revealing good photocatalytic activity. Moreover, the nanocomposite could be facilely recovered by filtration, and maintain almost the same photocatalytic activity after cycling tests for ten times, indicating excellent stability and recyclability. The enhanced photocatalytic performance of the nanocomposite might relate to the heterostructure between MoS2 and TiO2 to suppress the recombination of photo-induced charge, and the 3D hierarchical nanoweb structure to afford large specific surface area and high density of active sites.
Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Yang Li,Zhao Wang,Huijie Zhao,Mujie Yang

DOI: https://doi.org/10.1016/j.synthmet.2020.116529

IF: 4

2020-01-01

Synthetic Metals

Abstract:Carbon nanotubes (CNTs) are widely used in the preparation of composite functional materials with improved performance due to their unique electrical, mechanical properties and one-dimensional nanostructure. In this paper, the composite of TiO2 nanoparticles and acid-treated carbon nanotubes distributed on poly(methyl methacrylate) (PMMA) nanofibers was fabricated by sequential treatments of electrospinning, hydrothermal synthesis and freeze-drying. The resulting ternary composite of TiO2/CNTs/PMMA, which is featured with a specific surface area of 83.2 m(2)/g, effectively photodegraded a series of dyes, such as methyl blue, Rhodamine B, Sulforhodamine B and methyl orange (MO). In particular, complete degradation of MO (10 mg/L, 100 mL) was accomplished with TiO2/CNTs/PMMA (20 mg) in 40 min under UV irradiation. Moreover, the high photocatalytic activity of the ternary composite, which is superior to that of TiO2/PMMA, did not deteriorate during consecutive photodegradation tests up to ten runs. The photocatalytic mechanism of TiO2/CNTs/PMMA has been explored. The desirable high photocatalytic activity, excellent stability and easy recyclability of the ternary composite is attributed to the introduction of CNTs and the electrospun PMMA nanofiber support.
Preparation and Characterization of TiO2-PVDF/PMMA Blend Membranes Using an Alternative Non-Toxic Solvent for UF/MF and Photocatalytic Application

Ouassila Benhabiles,Francesco Galiano,Tiziana Marino,Hacene Mahmoudi,Hakim Lounici,Alberto Figoli

DOI: https://doi.org/10.3390/molecules24040724

IF: 4.6

2019-02-17

Molecules

Abstract:The approach of the present work is based on the use of poly (methylmethacrylate) (PMMA) polymer, which is compatible with PVDF and TiO2 nanoparticles in casting solutions, for the preparation of nano-composites membranes using a safer and more compatible solvent. TiO2 embedded poly (vinylidene fluoride) (PVDF)/PMMA photocatalytic membranes were prepared by phase inversion method. A non-solvent induced phase separation (NIPS) coupled with vapor induced phase separation (VIPS) was used to fabricate flat-sheet membranes using a dope solution consisting of PMMA, PVDF, TiO2, and triethyl phosphate (TEP) as an alternative non-toxic solvent. Membrane morphology was examined by scanning electron microscopy (SEM). Backscatter electron detector (BSD) mapping was used to monitor the inter-dispersion of TiO2 in the membrane surface and matrix. The effects of polymer concentration, evaporation time, additives and catalyst amount on the membrane morphology and properties were investigated. Tests on photocatalytic degradation of methylene blue (MB) were also carried out using the membranes entrapped with different concentrations of TiO2. The results of this study showed that nearly 99% MB removal can be easily achieved by photocatalysis using TiO2 immobilized on the membrane matrix. Moreover, it was observed that the quantity of TiO2 plays a significant role in the dye removal.

chemistry, multidisciplinary,biochemistry & molecular biology
Surface Morphology and Modulus, Wetting Behavior and Photocatalytic Activity of the TiO2 Coated Materials Based on PMMA/O-MMT Composite Microfibers

Qing-Qing Wang,Xue-Jia Li,Qu-Fu Wei,Xin Wang,Jian Yu

DOI: https://doi.org/10.3993/jfbi04201105

2011-01-01

Abstract:Poly(Methyl Methacrylate) PMMA/Organically Modified Montmorillonite (O-MMT) composite microfibers membrane coated with TiO2 has significant advantages in cationic dyes adsorption and can break down the adsorbed dyes under UV radiation, which is quite useful in water treatment. In this work, PMMA/O-MMT composite microfibers were firstly prepared by emulsion polymerization combined with electrospinning, and then coated by nanosize TiO2 using RF magnetron sputtering. The effects of TiO2 sputter coating on morphology and surface modulus was characterized by Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM), while the wetting behaviour was studied by drop shape analyzer. The photocatalytic degradation of methylene blue was tested under UV radiation and the properties of the treated and untreated samples were compared. It was observed from SEM images that TiO2 was well dispersed and deposited on the surface of PMMA/O-MMT microfibers, while the AFM results showed increase in the surface modulus after TiO2 coating. Besides, the wettability of the microfibers membrane coated with TiO2 was altered, which facilitated water treatment in practical use. Furthermore, the PMMA/O-MMT microfibers membrane coated with TiO2 performed well in photocatalytic degradation of methylene blue. In conclusion, PMMA/O-MMT composite microfibers membrane coated with TiO2 was quite promising in water treatment.
Fabrication of Visible-Light-active Fe-2MI Film Electrode for Simultaneous Removal of Cr(VI) and Phenol

Meng Tan,Qiaoyuan Gao,Yangjie Fu,Youran Xu,Derek Hao,Bing-Jie Ni,Qi Wang

DOI: https://doi.org/10.1016/j.mssp.2022.107013

IF: 4.1

2022-01-01

Materials Science in Semiconductor Processing

Abstract:In this study, a new coordination polymer of Fe-2-methylimidazole (Fe-2MI) was successfully loaded onto F-doped tin oxide (FTO) via a one-pot solvothermal method, using Fe(NO3)(3) and 2MI as raw materials. For X-ray diffraction patterns (XRD) and scanning electron microscope (SEM) analysis, it can be deduced that Fe-2MI assembles were evenly dispersed on the surface of FTO, and were partially encapsulated by tiny FeOOH particles. The as-prepared Fe-2MI film electrode was used as photoanode with titanium sheet (Ti) as the cathode. Simultaneous photoelectrocatalytic (PEC) removal of phenol and Cr(VI) can be effortlessly accomplished under noticeable light illumination. Meanwhile, the impact of initial Fe state was also investigated. Fe-2MI prepared with Fe(III) behaved better PEC performance than that with Fe(II). Furthermore, the Fe-2MI photoanodes were optimized by adjusting the initial concentration of Fe(III) and 2MI precursors. Besides, the application conditions were optimized at acidic pHs and 2.5 V bias voltage. Cr(VI) can be completely reduced with 80% removal of phenol after 5 h PEC reaction. After 5 successive cyclic runs, stable photocatalytic performance can still be observed. Therefore, Fe-2MI coordination polymer can be a promising candidate for preparing visible-light-active photoanode in the application of environmental remediation.
Polyoxometalate/TiO2/Ag Composite Nanofibers with Enhanced Photocatalytic Performance under Visible Light

Hongfei Shi,Yanchun Yu,Yi Zhang,Xiaojia Feng,Xinyu Zhao,Huaqiao Tan,Shifa Ullah Khan,Yangguang Li,Enbo Wang

DOI: https://doi.org/10.1016/j.apcatb.2017.09.027

2018-01-01

Abstract:The exploration of highly efficient and stable visible-light-driven photocatalysts for the wastewater treatment has been recognized as one of the currently most challenging topics for the environment remediation. In this paper, we report a new type of polyoxometalate-TiO2 composite nanofibers loaded with Ag nanoparticles (NPs), labeled as PMo12/TiO2/Ag-X (PMo12 = [PMo12O40](3-) X represents the weight percent (%) of Ag in PMo12/TiO2/Ag samples; X = 3.98, 5.41, 6.83, and 7.19 respectively). The SEM and TEM images manifest that the average diameter of the PMo12/TiO2 composite fibers is about 130 +/- 30 mn, and the average size of Ag NPs is about 15 +/- 5 nm. Photocatalytic experiments confirm that PMo12/TiO2/Ag catalysts display highly efficient and durable activity for the photodegradation of methyl orange (MO) and photoreduction of Cr(VI) under visible light irradiation (lambda > 420 nm). In these composite series, PMo12/TiO2/Ag-5.41 exhibits the highest photo catalytic activity. The photocatalytic mechanism reveals that both Ag and PMo12 can be excited under visible light irradiation, which greatly improves the visible-light absorption of the composites. Furthermore, the introduction of POM species can not only improve the light adsorption and redox activity of the TiO2, but also promote the photochemical stability of the plasmonic composites because of the relatively narrow band gap and low reversible redox potential of polyoxoanion. Such POMs-based plasmon photocatalysts are important in ongoing efforts to designing and exploring of new photocatalytic materials with low cost, high efficiency, and durability.
Preparation and Photocatalytic Performance of Sodium Alginate/Polyacrylamide/Polypyrrole-TiO2 Nanocomposite Hydrogels

Amatjan Sawut,Tongmeng Wu,Rena Simayi,Xueying Jiao,Yurou Feng

DOI: https://doi.org/10.3390/polym15204174

IF: 5

2023-10-21

Polymers

Abstract:The application of photocatalysis technology in environmental pollution treatment has garnered increasing attention, and enhancing the photocatalytic efficiency and recyclability of photocatalysts represents a pivotal research focus for future endeavors. In this paper, polypyrrole titanium dioxide nanocomposite (PPy-TiO2) was prepared using in situ polymerization method and dispersed in sodium alginate/polyacrylamide (SA/PAM) hydrogel matrix to prepare SA/PAM/PPy-TiO2 nanocomposite hydrogels. The nanocomposite hydrogels were characterized by XPS, FT-IR, XRD, TGA, SEM, and TEM. The results showed that the composite materials were successfully prepared and PPy-TiO2 was uniformly dispersed in the hydrogel matrix. The incorporation of PPy in the SA/PAM/TiO2 composite hydrogel resulted in enhanced visible light absorption, reduced recombination efficiency of photoelectron-hole pairs in TiO2, and facilitated the photocatalytic degradation of methylene blue (MB) and methyl orange (MO) under sunlight irradiation. The photocatalytic efficiency of the composite hydrogel for MB was nearly 100%, whereas for MO, it reached 91.85% after exposure to sunlight for 120 min. In comparison with nano-TiO2 and PPy-TiO2, the SA/PAM/PPy-TiO2 nanocomposite hydrogel exhibited a higher degradation rate of MB and demonstrated ease in separation and recovery from the reaction solution. Furthermore, even after undergoing five cycles of recycling, there was no significant decrease observed in photodegradation efficiency.

polymer science
Conjugated Microporous Polymers with Immobilized TiO2 Nanoparticles for Enhanced Visible Light Photocatalysis

Cyrine Ayed,Wei Huang,Run Li,Lucas Caire da Silva,Di Wang,Oksana Suraeva,Wahiba Najjar,Kai A. I. Zhang

DOI: https://doi.org/10.1002/ppsc.201700234

IF: 3.467

2018-01-01

Particle & Particle Systems Characterization

Abstract:The search for heterogeneous, visible light-active, transition metal-free, stable, and reusable photocatalysts for organic photoredox reactions remains a challenge for the chemists. Here, this study reports on a series of hybrid photocatalysts consisting of conjugated microporous polymer-based organic semiconductors with immobilized TiO2 nanoparticles. The organic/inorganic semiconductor-based hybrid photocatalytic system can enhance the photoinduced charge separation and thereby increasing the photocatalytic efficiency. As model reactions, the photocatalytic oxidative coupling reaction of amines and the selective oxidation of organic sulfides can be catalyzed with almost quantitative conversion and selectivity. The catalytic efficiency of the hybrid photocatalyst is higher than that of the pristine single photocatalytic systems as the conjugated microporous polymer and TiO2. Furthermore, the mechanistic study of the photoredox reactions is also described.
PMMA-TiO2 Fibers for the Photocatalytic Degradation of Water Pollutants

Namrata Kanth,Weiheng Xu,Umesh Prasad,Dharneedar Ravichandran,Arunachala Mada Kannan,Kenan Song

DOI: https://doi.org/10.3390/nano10071279

2020-06-30

Abstract:Titanium dioxide (TiO2) is a promising photocatalyst that possesses a redox potential suitable for environmental remediation applications. A low photocatalytic yield and high cost have thus far limited the commercial adoption of TiO2-based fixed-bed reactors. One solution is to engineer the physical geometry or chemical composition of the substrate to overcome these limitations. In this work, porous polymethyl methacrylate (PMMA) substrates with immobilized TiO2 nanoparticles in fiber forms were fabricated and analyzed to demonstrate the influence of contaminant transport and light accessibility on the overall photocatalytic performance. The influences of (i) fiber porosity and (ii) fiber architecture on the overall photocatalytic performance were investigated. The porous structure was fabricated using wet phase inversion. The core-shell-structured fibers exhibited much higher mechanical properties than the porous fibers (7.52 GPa vs. non-testability) and maintained the same degradation rates as porous structures (0.059 vs. 0.053/min) in removing methylene blue with comparable specific surface areas. The highest methylene blue (MB) degradation rate (kMB) of 0.116 min-1 was observed due to increases of the exposed surface area, pointing to more efficient photocatalysis by optimizing core-shell dimensions. This research provides an easy-to-manufacture and cost-efficient method for producing PMMA/TiO2 core-shell fibers with a broad application in water treatment, air purification, and volatile sensors.
Acute kidney injury due to acyclovir

C. Yildiz,Y. Ozsurekci,S. Gucer,A. Cengiz,R. Topaloğlu

DOI: https://doi.org/10.1007/s13730-012-0035-0

2013-05-01

CEN Case Reports

Abstract:
Fabrication of novel eco-friendly visible-light responsive MIL88A decorated with uniform titanium dioxide for efficient phenol removal

Mehrazin Nikseresht,Davood Iranshahi,Alireza Badiei

DOI: https://doi.org/10.1007/s10854-023-11855-z

2024-01-23

Journal of Materials Science Materials in Electronics

Abstract:Decorating an eco-friendly MOF with active species that can minimize electron–hole recombination can be very effective in photocatalytic reactions. Herein, a one-pot method is proposed in which, simultaneously with the growth of MIL88A crystals, TiO 2 nanoparticles are uniformly placed on the MOF surface and produce TiO 2 /MIL88A (TMA-X) composites. Therefore, the optimal conditions were chosen in such a way that the uniform decoration of TiO 2 on MIL88A was observed. The results showed that TMA-10 composite produced in optimum conditions has better performance than others, and the rate of phenol degradation can reach 95% within 45 min under visible-light radiation. The band gap and band structure of the composite were investigated by DRS and Mott–Schottky. Also, trapping experiments prove that • O 2 − and • OH are predominant active radicals in the photocatalytic reaction. Moreover, the composite showed good reusability and stability during repeated use, making it an attractive candidate for practical environmental applications.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
An efficient, stable and reusable polymer/TiO2 photocatalytic membrane for aqueous pollution treatment

Lin Ma,Yu Chen,Junping Zheng

DOI: https://doi.org/10.1007/s10853-021-06018-6

IF: 4.5

2021-03-29

Journal of Materials Science

Abstract:In this study, a facile, convenient and highly efficient method was applied to immobilize TiO2 nanoparticles (TiO2 NPs) on polymer matrix to realize the both advantages of effective photocatalytic degradation and no post-processing. 2-(methacryloyloxy)ethyltrimethylammonium chloride (MTC) was introduced as a polymerizable cationic ligand to establish electrostatic interaction with TiO2 NPs, which improved the dispersion of the nanoparticles and thus enhanced the photocatalytic efficiency. Fourier transform infrared spectroscopy as well as the result of X-ray diffraction indicated that TiO2 NPs had been successfully introduced into the nanocomposites and immobilized with the matrix, and results of scanning electron microscopy and transmission electron microscopy proved the uniform dispersion of TiO2 NPs with particle size at around 20 nm. Meanwhile, the systematic photodegradation experiments proved the excellent photocatalytic degradation efficiency of the prepared polymer/TiO2 nanocomposite membranes in various conditions. Specifically, the decomposition rate of methylene blue (MB) during 270 min UV irradiation can reach 99.66%. Furthermore, the nanocomposite photocatalyst was found to be remarkably stable in cyclic decomposition tests, which can keep as high as 98.7% of degradation efficiency after 20 cycles, exhibiting outstanding stability and reusability. Thereby, the polymer/TiO2 nanocomposite membrane provides prospects to be applied in photocatalytic degradation and water contamination treatments.

materials science, multidisciplinary
Visible-Light Active Sulfur-Doped Titania Nanoparticles Immobilized on a Silica Matrix: Synthesis, Characterization and Photocatalytic Degradation of Pollutants

Theodora Kalampaliki,Sofia P Makri,Evanthia Papadaki,Alexios Grigoropoulos,Alexandros Zoikis Karathanasis,Ioanna Deligkiozi

DOI: https://doi.org/10.3390/nano11102543

2021-09-28

Abstract:The photocatalytic oxidation (PCO) of pollutants using TiO2-based materials can significantly improve indoor air quality (IAQ), which in turn, has a significant impact on human health and life expectancy. TiO2-based nanoparticles (NPs) are widely used as part of building materials to function as photocatalysts in PCO. In this work, a series of sulfur-doped TiO2 NPs immobilized on a silica matrix were synthesized by combining a sol-gel process with ball milling. The samples were structurally characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), Fourier-transform infrared spectroscopy (FT-IR) and N2 adsorption-desorption isotherms. Furthermore, the morphological characteristics were determined by dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The photocatalytic activity of the as prepared S-doped TiO2/SiO2 NPs in the degradation of liquid and air pollutants under visible-light irradiation was investigated. Our results show that sulfur is an effective dopant for activating TiO2/SiO2 photocatalysts under visible-light irradiation. Silica constitutes a "safe-by-design" approach and inhibits the aggregation of NPs during synthesis. The most efficient photocatalyst afforded 79% removal of methyl orange (5 h), 26% removal of acetaldehyde (1 h) and 12% oxidation of NO (1 h).
Benign paroxysmal vertigo secondary to placement of maxillary implants using the alveolar expansion technique with osteotomes: a study of 4 cases.

M. Peñarrocha-Diago,Javier Rambla-Ferrer,V. Pérez,H. Pérez-Garrigues

The International Journal of Oral and Maxillofacial Implants

Abstract:The osteotome method is an often-used technique of great utility in certain patients with maxillary bone atrophy. However, it has been associated with the provocation of benign paroxysmal positional vertigo (BPPV), which has been described as a consequence of working the implant bed with osteotomes. During the placement of maxillary dental implants using the osteotome technique, the trauma induced by percussion with the surgical hammer, along with hyperextension of the neck during the operation, can displace otoliths and induce BPPV. Four cases of BPPV occurring after the preparation of maxillary implant beds are presented. Treatment consists fundamentally of maneuvers to move the calcium carbonate crystals from their anomalous location in the semicircular canal to their correct place in the utricle.
Visible-light responsive novel WO3/TiO2 and Au loaded WO3/TiO2 nanocomposite and wastewater remediation: Mechanistic inside and photocatalysis pathway

Masudur Rhaman,Sumon Ganguli,Sandipan Bera,Sher Bahadur Rawal,Ashok Kumar Chakraborty,Md. Masudur Rhaman

DOI: https://doi.org/10.1016/j.jwpe.2020.101256

IF: 7

2020-08-01

Journal of Water Process Engineering

Abstract:Global environmental pollution is thought to be the principal source of emission of industrial untreated effluent. Photocatalysis is the versatile process to eliminate these pollutants which is utilizing semiconductor metal oxides. A nanocomposite WO3/TiO2 working under visible-light (λ ≥ 420 nm) has been prepared employing cis-butenedioic acid to associate component semiconductors of WO3 and TiO2 nanoparticle. The composite was optimized to 5 mol% WO3/TiO2 in terms of photocatalytic activity to decompose phenol and methylene blue dye in aqueous under visible-light. Afterwards, Au nanoparticle was deposited on to the surface of optimized WO3/TiO2. Au loaded WO3/TiO2 were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscope (EDX) mapping and UV–vis absorption spectra. Photocatalytic efficiency of Au-WO3/TiO2 has been measured to degrade above organic pollutants in aqueous phase under visible-light. Au-WO3/TiO2 demonstrated extraordinarily high photocatalytic efficiency in decomposing the pollutants compare to 5 mol% WO3/TiO2 nanocomposite. After 120 min of visible irradiation, 63 % decomposition of phenol and 52 % degradation of methylene blue dye was observed under the identical condition. The outstanding improvement of photocatalytic efficiency of Au-WO3/TiO2 nanocomposite ascribed due to the perfect matching of energy band positions of WO3 and TiO2 which inhibit photo-excited (e‾)–hole (h+) recombination as well as favor inter particle transfer between WO3 and TiO2. Au nanoparticles enhances transfer of electron (e‾) from CB of WO3. Thus, possible recombination of photo-excited electron (e‾)–hole (h+) pair was retarded and photocatalytic efficiency was greatly improved.

engineering, chemical, environmental,water resources
TiO2 reinforced PMMA-TiO2 nanocomposite for its application in organic light emitting diode (OLED) as electron transport layer material

R. Kandulna,R. B. Choudhary,R. Singh

DOI: https://doi.org/10.1063/1.5029040

2018-01-01

AIP Conference Proceedings

Abstract:PMMA, TiO2 and PMMA-TiO2 nanocomposite were successfully synthesized in the laboratory via free radical polymerization process. The formation of PMMA corresponding change in the nanostructure with the embodiment of TiO2 nanofillers was confirmed by X-ray diffraction technique (XRD) analysis. Irregular tetragonal bipyramidal arrangement of TiO2 was formed within the spherical type structure of PMMA polymeric matrix, as examined by the surface morphological image. Relatively higher electron-hole non-radiative recombination of PMMA-TiO2 nanocomposite corresponded to blue-violet band, blue band, and green band was examined from PL spectra. An enhanced current density ∼ 165 % was observed with significantly improved p-type conductivity for PMMA-TiO2 nanocomposite. The improved specific capacitance with high dielectric constant and high electron-hole recombination rate confirmed that it can possibly use as electron transport layer material in the OLED devices fabrication.
TECHNIQUE FOR STUDYING THE EFFECTS OF DRUGS ON DISCRIMINATION IN THE PIGEON

D. Blough

DOI: https://doi.org/10.1111/j.1749-6632.1956.tb49643.x

IF: 6.499

1956-11-01

Annals of the New York Academy of Sciences

Abstract:I shall discuss a discrimination technique that is, as the saying goes, neither flesh nor fowl. In fact, this technique results from crossbreeding the flesh of the classical choice-box method with the fowl of the schedule-oriented operant technique. From the former comes the use of brief presentations of 2 response keys, 1 correct and 1 incorrect. From the latter come the recording of many responses-not just 1 per trial-on each of the keys and the use of a schedule of intermittent reinforcement to maintain this behavior.

[Role of infection in delayed abortion and premature labor].

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Photo-Induced Charge Generation of TiO&lt;sub&gt;2&lt;/sub&gt; Nanotube Modified with Polymer Containing C&lt;sub&gt;60&lt;/sub&gt; under Irradiation of Visible Light and its Applications

Solvothermal synthesis of stable nanoporous polymeric bases-crystalline TiO2 nanocomposites: visible light active and efficient photocatalysts for water treatment.

3D MoS2@TiO2@poly(methyl Methacrylate) Nanocomposite with Enhanced Photocatalytic Activity.

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Preparation and Characterization of TiO2-PVDF/PMMA Blend Membranes Using an Alternative Non-Toxic Solvent for UF/MF and Photocatalytic Application

Surface Morphology and Modulus, Wetting Behavior and Photocatalytic Activity of the TiO2 Coated Materials Based on PMMA/O-MMT Composite Microfibers

Fabrication of Visible-Light-active Fe-2MI Film Electrode for Simultaneous Removal of Cr(VI) and Phenol

Polyoxometalate/TiO2/Ag Composite Nanofibers with Enhanced Photocatalytic Performance under Visible Light

Preparation and Photocatalytic Performance of Sodium Alginate/Polyacrylamide/Polypyrrole-TiO2 Nanocomposite Hydrogels

Conjugated Microporous Polymers with Immobilized TiO2 Nanoparticles for Enhanced Visible Light Photocatalysis

PMMA-TiO2 Fibers for the Photocatalytic Degradation of Water Pollutants

Acute kidney injury due to acyclovir

Fabrication of novel eco-friendly visible-light responsive MIL88A decorated with uniform titanium dioxide for efficient phenol removal

An efficient, stable and reusable polymer/TiO2 photocatalytic membrane for aqueous pollution treatment

Visible-Light Active Sulfur-Doped Titania Nanoparticles Immobilized on a Silica Matrix: Synthesis, Characterization and Photocatalytic Degradation of Pollutants

Benign paroxysmal vertigo secondary to placement of maxillary implants using the alveolar expansion technique with osteotomes: a study of 4 cases.

Visible-light responsive novel WO3/TiO2 and Au loaded WO3/TiO2 nanocomposite and wastewater remediation: Mechanistic inside and photocatalysis pathway

TiO2 reinforced PMMA-TiO2 nanocomposite for its application in organic light emitting diode (OLED) as electron transport layer material

TECHNIQUE FOR STUDYING THE EFFECTS OF DRUGS ON DISCRIMINATION IN THE PIGEON

Photo-Induced Charge Generation of TiO<sub>2</sub> Nanotube Modified with Polymer Containing C<sub>60</sub> under Irradiation of Visible Light and its Applications