Studies on the development of Plasmodium vivax in Anopheles subpictus.

N. Nanda,C. Dass,S. Subbarao,T. Adak,V. Sharma

1987-12-01

Abstract:

What problem does this paper attempt to address?

A Life Cycle Environmental Impact Comparison between Traditional, Hybrid, and Electric Vehicles in the European Context

Emiliano Pipitone,Salvatore Caltabellotta,Leonardo Occhipinti

DOI: https://doi.org/10.3390/su131910992

IF: 3.9

2021-10-03

Sustainability

Abstract:Global warming (GW) and urban pollution focused a great interest on hybrid electric vehicles (HEVs) and battery electric vehicles (BEVs) as cleaner alternatives to traditional internal combustion engine vehicles (ICEVs). The environmental impact related to the use of both ICEV and HEV mainly depends on the fossil fuel used by the thermal engines, while, in the case of the BEV, depends on the energy sources employed to produce electricity. Moreover, the production phase of each vehicle may also have a relevant environmental impact, due to the manufacturing processes and the materials employed. Starting from these considerations, the authors carried out a fair comparison of the environmental impact generated by three different vehicles characterized by different propulsion technology, i.e., an ICEV, an HEV, and a BEV, following the life cycle analysis methodology, i.e., taking into account five different environmental impact categories generated during all phases of the entire life of the vehicles, from raw material collection and parts production, to vehicle assembly and on-road use, finishing hence with the disposal phase. An extensive scenario analysis was also performed considering different electricity mixes and vehicle lifetime mileages. The results of this study confirmed the importance of the life cycle approach for the correct determination of the real impact related to the use of passenger cars and showed that the GW impact of a BEV during its entire life amounts to roughly 60% of an equivalent ICEV, while acidifying emissions and particulate matter were doubled. The HEV confirmed an excellent alternative to ICEV, showing good compromise between GW impact (85% with respect to the ICEV), terrestrial acidification, and particulate formation (similar to the ICEV). In regard to the mineral source deployment, a serious concern derives from the lithium-ion battery production for BEV. The results of the scenario analysis highlight how the environmental impact of a BEV may be altered by the lifetime mileage of the vehicle, and how the carbon footprint of the electricity used may nullify the ecological advantage of the BEV.

environmental sciences,environmental studies,green & sustainable science & technology
Impact of the Electric Mobility Implementation on the Greenhouse Gases Production in Central European Countries

Tomáš Skrúcaný,Martin Kendra,Ondrej Stopka,Saša Milojević,Tomasz Figlus,Csaba Csiszár

DOI: https://doi.org/10.3390/su11184948

IF: 3.9

2019-09-10

Sustainability

Abstract:The preference and the development of electromobility are included among the priorities of transport policies in many European countries. This article deals with the issue of electric vehicle operation from the point of view of the environmental impact of electric power production, specifically the energy effectiveness of its production by utilizing primary power production sources. Differences in the effectiveness of the conversion of mixed forms of energy into electricity and their share in the process directly affect the final level of greenhouse gases (GHG) production, and thus the ecological footprint of electric vehicle operations. The specification of energy consumption and GHG production is based on the principles of the EN 16 258: 2012 standard, which considers legislative-regulated power plant effectiveness values, statistical values of GHG emissions from electricity production, and real energy consumption values of an electric vehicle fleet. The calculation takes into account the share of primary sources and the efficiency of electricity production and effectiveness of electricity distribution in each of the evaluated countries. The specific research study is performed by comparing measured parameters for individual countries chosen from the Central Europe region. The results of the study show that the quantification of the positive environmental consequences of increasing electromobility varies greatly in different countries, which means full-scale deployment of electromobility does necessarily deliver the sustainability of transport that was expected from it.

environmental sciences,environmental studies,green & sustainable science & technology
Sensitivity Analysis in the Life-Cycle Assessment of Electric vs. Combustion Engine Cars under Approximate Real-World Conditions

Eckard Helmers,Johannes Dietz,Martin Weiss

DOI: https://doi.org/10.3390/su12031241

IF: 3.9

2020-02-09

Sustainability

Abstract:This study compares the environmental impacts of petrol, diesel, natural gas, and electric vehicles using a process-based attributional life cycle assessment (LCA) and the ReCiPe characterization method that captures 18 impact categories and the single score endpoints. Unlike common practice, we derive the cradle-to-grave inventories from an originally combustion engine VW Caddy that was disassembled and electrified in our laboratory, and its energy consumption was measured on the road. Ecoivent 2.2 and 3.0 emission inventories were contrasted exhibiting basically insignificant impact deviations. Ecoinvent 3.0 emission inventory for the diesel car was additionally updated with recent real-world close emission values and revealed strong increases over four midpoint impact categories, when matched with the standard Ecoinvent 3.0 emission inventory. Producing batteries with photovoltaic electricity instead of Chinese coal-based electricity decreases climate impacts of battery production by 69%. Break-even mileages for the electric VW Caddy to pass the combustion engine models under various conditions in terms of climate change impact ranged from 17,000 to 310,000 km. Break-even mileages, when contrasting the VW Caddy and a mini car (SMART), which was as well electrified, did not show systematic differences. Also, CO2-eq emissions in terms of passenger kilometers travelled (54–158 g CO2-eq/PKT) are fairly similar based on 1 person travelling in the mini car and 1.57 persons in the mid-sized car (VW Caddy). Additionally, under optimized conditions (battery production and use phase utilizing renewable electricity), the two electric cars can compete well in terms of CO2-eq emissions per passenger kilometer with other traffic modes (diesel bus, coach, trains) over lifetime. Only electric buses were found to have lower life cycle carbon emissions (27–52 g CO2-eq/PKT) than the two electric passenger cars.

environmental sciences,environmental studies,green & sustainable science & technology
Electric Vehicles from an Economic Point of View

Mária Urbánová,Dominika Čeryová,Viktória Benďáková,Patrícia Husárová

DOI: https://doi.org/10.2478/jec-2023-0009

2023-06-01

Economics and Culture

Abstract:Abstract Research purpose. In recent years, the importance of moving from a linear economy to a circular economy in every area and sector of the economy has been discussed more than ever before. This includes discussions on a net zero energy system as the basis for a fully decarbonised electricity sector. The increase in demand for electricity and the push for net zero emissions are leading to a focus on using electric vehicles to meet the EU's sustainability targets. The European transport sector is responsible for a significant part of the European Union's total greenhouse gas emissions. The main aim is to evaluate the impacts of the automotive industry from an economic point of view because the increase in sales of electric cars can lead, among other things, to the mitigation of environmental problems. Design / Methodology / Approach. Electric cars and biofuel cars are the two most discussed solutions in the transport sector. As EVs are sustainable to the extent that their energy sources are sustainable, the main aim of this research paper is to investigate the impacts of the chosen electric vehicle types from an economic point of view, especially the sales of electric vehicles in the time period of 2010-2021. Battery electric vehicles and plug-in hybrid vehicles' sales situation will be analysed in Europe and globally. The assumptions and hypotheses were set and verified through regression and correlation analysis. Findings. The research results have confirmed our assumptions that the number of vehicles sold in Europe and worldwide is increasing with time. During the time period under consideration, electric car sales increased worldwide. 6,600,000 battery electric vehicles and plug-in hybrid vehicles were supplied in total in 2021, representing a 45% increase from the previous year. The most significant growth in car sales in Slovakia was in 2021, but only one-tenth of one per cent were electric vehicles. Originality / Value / Practical implications. A gradual shift of the main interest from automakers to electric vehicles is seen. At the same time, there are other questions connected to electric vehicles that need to be addressed and analysed, such as their high price, charging options and infrastructure and, nowadays, the electricity price.
Accurate energy consumption for comparison of climate change impact of thermal and electric vehicles

A. Desreveaux,A. Bouscayrol,R. Trigui,E. Hittinger,E. Castex,G.M. Sirbu

DOI: https://doi.org/10.1016/j.energy.2023.126637

IF: 9

2023-01-15

Energy

Abstract:Performing a climate impact assessment of vehicles is essential for comparing different powertrain options during an entire vehicle life. Life Cycle Assessment (LCA) is used to estimate these effects over a vehicle's lifecycle, including manufacturing, usage, and end-of-life phases. LCA comprises several indicators, such as the Global Warming Potential (GWP). Generally, LCA or GWP studies use manufacturer-reported standard cycle data to estimate the energy consumption of vehicles. In this article, we develop diesel, gasoline, and electric vehicle simulation tools using the Energetic Macroscopic Representation formalism to evaluate that practice. These simulations are validated with actual, measured driving cycles. The simulations are then used to compare the calculated GWP from real, measured driving cycles relative to standard driving cycles used as industry benchmarks. The results show that standard driving cycles consistently underestimate the benefit of switching from fossil fueled vehicles to electric vehicles. Finally, a sensitivity analysis of the battery life duration is included in this work. It shows that the replacement or second life of batteries is also a key parameter in the GWP advantages of electric vehicles.

energy & fuels,thermodynamics
Comparative life cycle assessment of sport utility vehicles with different fuel options

Enes Karaaslan,Yang Zhao,Omer Tatari

DOI: https://doi.org/10.1007/s11367-017-1315-x

2017-04-10

The International Journal of Life Cycle Assessment

Abstract:<h3 class="a-plus-plus">Abstract</h3> <span class="a-plus-plus abstract-section id-a-sec1"> <h3 class="a-plus-plus">Purpose</h3> <p class="a-plus-plus">Sport utility vehicles typically have lower fuel economy due to their high curb weights and payload capacities as well as their potential to cause serious environmental impacts. In light of this fact, a life cycle assessment is carried out in this study to assess their cradle-to-grave environmental impacts for life cycle phases ranging from manufacturing to end-of-life recycling.</p> </span> <span class="a-plus-plus abstract-section id-a-sec2"> <h3 class="a-plus-plus">Methods</h3> <p class="a-plus-plus">A hybrid economic input-output life cycle assessment (EIO-LCA) method is used in this research paper to estimate the environmental impacts (greenhouse gas emissions, energy consumption, and water withdrawal) of sport utility vehicles. This life cycle assessment is also supplemented with a sensitivity analysis, using a Monte Carlo simulation to estimate the possible ranges for total mileage of operation and fuel economy, and to account for the sensitivity of the EIO-LCA output.</p> </span> <span class="a-plus-plus abstract-section id-a-sec3"> <h3 class="a-plus-plus">Results and discussion</h3> <p class="a-plus-plus">The operation phase is the major contributor to the overall life cycle impact of sport utility vehicles in each fuel/power category. Furthermore, among the selected vehicles in this study, the battery electric vehicle has the lowest greenhouse gas emissions (77.2 tonnes) and the lowest energy consumption (1046.8 GJ) even though the environmental impact indicators for the battery manufacturing process are significantly large. The plug-in hybrid vehicle, on the other hand, demonstrates an optimal performance between energy use and water withdrawal (1172.9 GJ of energy consumption and 1370 kgal of water withdrawal). In addition, all of the fuel-powered vehicles demonstrated similar environmental performances in terms of greenhouse gas emissions, which ranged between 100 and 110 tonnes, but the hydrogen fuel cell vehicle had a significantly large water withdrawal (2253.2 kgal).</p> </span> <span class="a-plus-plus abstract-section id-a-sec4"> <h3 class="a-plus-plus">Conclusions</h3> <p class="a-plus-plus">Since the majority of the overall impact stems from the operation of the vehicle in question, their complete elimination of tailpipe emissions and their high energy efficiency levels make battery electric vehicles a viable green option for sport utility vehicles. However, there are certain uncertainties beyond the scope of this study that can be considered in future studies to improve upon this assessment, including (but not limited to) regional differences in source of electricity generation and socio-economic impacts.</p> </span>

environmental sciences,engineering, environmental
The Impact of Vehicle Technology, Size Class, and Driving Style on the GHG and Pollutant Emissions of Passenger Cars

Martin Opetnik,Stefan Hausberger,Claus Uwe Matzer,Silke Lipp,Lukas Landl,Konstantin Weller,Miriam Elser

DOI: https://doi.org/10.3390/en17092052

IF: 3.2

2024-04-26

Energies

Abstract:Although technical improvements to engines and aftertreatment systems have the greatest impact on pollutant emissions, there is also potential for reducing emissions through driver behavior. This potential can be realized in the very short term, while better emission-control technologies only take effect once they have penetrated the market. In addition to a change in driving style, the vehicle owner's choice of vehicle technology and size class will also have an impact on the future emissions of the vehicle fleet. The effects of different driving styles, the tire choice, the vehicle size class, and propulsion technologies on energy consumption and tailpipe and non-exhaust emissions are analyzed in this paper for different traffic situations and start temperatures for cars with petrol and diesel combustion engines and for battery electric vehicles. The analysis is completed with the corresponding upstream emissions from fuel and electricity production. The analysis is based on a vehicle simulation using the Passenger car and Heavy-duty Emission Model (PHEM), which is based on a large database of vehicles created using measurements of real driving conditions. For the assessment of the driving style, a novel method was developed in an H2020 project, which reproduces a measured trip with a virtual eco-driver. Carbon dioxide equivalent emissions (CO2eq) increase with increasing vehicle size, but can be reduced by around 20% for conventional vehicles and 17% for battery electric vehicles (BEVs) through an environmentally conscious driving style. On average, BEVs have around 50% lower CO2eq emissions than conventional vehicles, if the emissions from vehicle production are also taken into account. On an average journey of 35 km, the cold start of modern diesel vehicles accounts for around half of the total NOx emissions, while the proportion of cold starts for petrol vehicles is around 25%. Tire and brake wear together generate a similar amount of PN23 emissions as the exhaust gases from new cars.

energy & fuels
Exhaust Emissions and Energy Consumption Analysis of Conventional, Hybrid, and Electric Vehicles in Real Driving Cycles

Jacek Pielecha,Kinga Skobiej,Karolina Kurtyka

DOI: https://doi.org/10.3390/en13236423

IF: 3.2

2020-12-04

Energies

Abstract:One of the environmental aims of the European Union is to achieve climate neutrality by 2050. According to European Parliament data, transport emissions accounted for about 25% of global carbon dioxide emissions in 2016, in which road transport had the largest share (approximately 72%). This phenomenon is particularly visible in urban agglomerations. The solution examples are the popularization of hybrid vehicles and the development of electromobility. The aim of this paper is an assessment of the energy consumption and exhaust emissions from passenger cars fitted with different powertrains in actual operation. For the tests, passenger cars with conventional engines of various emission classes were used as well as the latest hybrid vehicles and an electric car. It enabled a comparative assessment of the energy consumption under different traffic conditions, with particular emphasis on the urban phase and the entire RDE (Real Driving Emissions) test. The results were analyzed to identify changes in these environmental factors that have occurred with the technical advancement of vehicles. The lowest total energy consumption in real traffic conditions is characteristic of an electric vehicle; the plug-in hybrid vehicle with a gasoline engine is about 10% bigger, and the largest one is a combustion vehicle (30% bigger than an electric vehicle). These data may contribute to the classification of vehicles and identification of advantages of the latest developments in conventional, hybrid, and electric vehicles.

energy & fuels
The Influence of Power Sources for Charging the Batteries of Electric Cars on CO2 Emissions during Daily Driving: A Case Study from Poland

Łukasz Sobol,Arkadiusz Dyjakon

DOI: https://doi.org/10.3390/en13164267

IF: 3.2

2020-08-18

Energies

Abstract:The main sources of greenhouse gas emissions and air pollution from the transport sector are diesel- and gasoline-powered passenger cars. The combustion of large amounts of conventional fuels by cars contributes to a significant release of various compounds into the atmosphere, such as solid particles, nitrogen oxides, carbon monoxide, and carbon dioxide. In order to reduce these pollutants in places of their high concentration (especially in urban agglomerations), the use of ecological means of transport for daily driving is highly recommended. Electric vehicles (EV) are characterized by ecological potential due to their lack of direct emissions and low noise. However, in Poland and many other countries, electricity production is still based on fossil fuels which can significantly influence the indirect emissions of carbon dioxide into the atmosphere associated with battery charging. Thus, indirect emissions from electric cars may be comparable or even higher than direct emissions related to the use of traditional cars. Therefore, the aim of the work was to analyze the amount of carbon dioxide emissions associated with the use of electric vehicles for daily driving (City, Sedan, SUV) and their impact on the environment on a local and global scale. Based on the assumed daily number of kilometers driven by the vehicle and the collected certified catalog data (Car Info Nordic AB), the direct emissions generated by the internal combustion engines (ICE) were calculated for specific cars. These values were compared to the indirect emissions related to the source of electricity generation, for the calculation of which the CO2 emission coefficient for a particular energy source and energy mix was used, as well as reference values of electricity generation efficiency in a given combustion installation, in accordance with the KOBiZE (The National Centre for Emissions Management) and European Union regulation. Indirect emissions generated from non-renewable fuels (lignite, hard coal, natural gas, diesel oil, heating oil, municipal waste) and renewable emissions (wind energy, solar energy, hydro energy, biomass, biogas) were considered. The results indicated that for the Polish case study, indirect carbon dioxide emission associated with the daily driving of EV (distance of 26 km) ranges 2.49–3.28 kgCO2∙day−1. As a result, this indirect emission can be even higher than direct emissions associated with ICE usage (2.55–5.64 kgCO2∙day−1).

energy & fuels
Emission from Internal Combustion Engines and Battery Electric Vehicles: Case Study for Poland

Magdalena Zimakowska-Laskowska,Piotr Laskowski

DOI: https://doi.org/10.3390/atmos13030401

IF: 3.11

2022-02-28

Atmosphere

Abstract:The paper compares the emissions from vehicles including ICEVs (internal combustion engine vehicles) with equivalent emissions from BEVs (battery electric vehicles). Additionally, it analyzes the available source research and the specific energy mix for Poland based on carbon. Mathematical calculations estimate air pollutant emissions. To carry out the analysis and calculations, data were provided by the manufacturers of electricity consumption in the case of vehicles equipped with electric motors and the COPERT model for internal combustion engines. Air pollutants are considered: CO2, NOx, SOx, CO, and Total Suspended Particles (TSP). In addition to exhaust emissions, all solids emissions from road abrasion and tire and brake wear are also considered. The emission of pollutants is estimated based on the emission factors using the average mileage in Polish conditions. The paper compares emissions for three scenarios considering electric vehicles, combustion engine cars, and hybrid cars. Analyses show that introducing cars with electric engines into traffic at the expense of withdrawing vehicles with internal combustion engines is not favorable in Polish conditions. The analysis indicates that CO, CO2, and TSP emissions have decreased, while NOx and SOx emissions have increased.

environmental sciences,meteorology & atmospheric sciences
Environmental impact assessment of the electric vehicles: A case study

Aleksandar V. Manojlović,Olivera M. Medar,Aleksandar S. Anđelković,Mladen A. Tomić

DOI: https://doi.org/10.1080/15567036.2023.2173342

2023-02-10

Abstract:Most of the air pollution originates from combustion processes, where traffic is one of the most important sources. Thus, road traffic's contribution to pollution and overall emissions is very important. One of the popular methods for reducing pollution in urban areas is the introduction of electric vehicles (EV), and this is the main reason why fully electric vehicles, as an alternative to conventional fossil fuel vehicles, are becoming more popular. Although EVs emit no tailpipe pollutants, the power plants in national grid systems may emit them. This is the case with coal-based energy systems, like the one in the Republic of Serbia. In this study, the analysis of direct and indirect emissions of CO 2 and NO X from ICE and EV is presented. The analysis has shown that the average specific emission factor for EVs, if charged in Serbia, is almost the same in terms of CO 2 with 194.7 g/km in comparison with 159.6 g/km, while in the case of NO X, the specific emissions factors for EV almost doubles, from 0.71 to 1.30 g/km. Further analyses have shown that decarbonizing the national power grid to reduce the complete replacement of the fleet with EVs for achieving net zero emissions requires all the available solar, wind, and hydropower resources of the Republic of Serbia. On the other hand, EVs could be used as battery storage for discontinuous energy sources covering the needs of over 25% of a personal vehicle fleet.

energy & fuels,engineering, chemical
Control of disease progress in Mycobacterium avium-infected AIDS patients.

S. Hoffner,G. Källenius,S. Svenson

DOI: https://doi.org/10.1016/0923-2508(92)90052-P

IF: 3.946

Research in Microbiology

Abstract:
Minor magnesium doping in P-type layer of InGaN/GaN MQW LED to enhance electrical and optical properties

M. Shih,Yung-Hsiang Lin,Chun-Wei Liao,Cheng-Ying Yen,Y. Chou,R. Lin

DOI: https://doi.org/10.1109/ISDRS.2007.4422553

2007-12-01

Abstract:In this study, the LED samples were grown by metalorganic chemical vapor deposition (MOCVD) on 430 mum-thick c-plan sapphire substrates. The layer sequence consisted of a 25.0 nm GaN nucleation layer followed by a 2.0 mum-thick undoped GaN buffer layer, a 2.0 mum-thick Si-doped GaN conduction layer, a active region composed of five 2.5 nm-thick In0.23Ga0.77N QWs separated by 12.0 nm-thick GaN barriers, followed by 15 pairs of Mg-doped AlGaN/GaN superlattice structure consisting of 3.0 nm AlGaN layers, and 3.0 nm GaN layers, a 30.0 nm-thick Mg-doped GaN cap layer. Finally, a 10.0 nm Mg-doped GaN contact layer was grown on the top of LED.
BEVSIM: Battery electric vehicle sustainability impact assessment model

Rajesh Mehta,Milad Golkaram,Jack T. W. E. Vogels,Tom Ligthart,Eugene Someren,Spela Ferjan,Jelmer Lennartz

DOI: https://doi.org/10.1111/jiec.13415

2023-07-10

Journal of Industrial Ecology

Abstract:To achieve climate neutrality ambitions, greenhouse gas emissions from the transport sector need to be reduced by at least 90% by 2050. To support industry and policy makers on mitigating actions on climate goals it is important to holistically compare and reduce life cycle environmental impacts of road passenger vehicles. A web‐based sustainability assessment tool named battery electric vehicle sustainability impact assessment model, BEVSIM, is developed to assess the environmental, circularity, and economic performance of the materials, sub‐systems, parts, and individual components of battery electric vehicles and internal combustion engine vehicles. This tool allows to measure and compare impacts resulting from recycling technologies, end‐of‐life scenarios, and future scenarios resulting from changes in grid mixes. This paper explains the purpose of the tool, its functionality and design as well as the underlying assumptions.

environmental sciences,green & sustainable science & technology,engineering, environmental
Statistical analysis of trends in Battery Electric Vehicles: Special reference to vehicle weight reduction, electric motor, battery, and interior space dimensions

Marko Lučić,Jovanka Lukić,Ivan Grujić

DOI: https://doi.org/10.14669/am/189962

2024-06-26

Abstract:Electric vehicles (EVs) are increasingly being used, as they are more environmentally friendly than conventional vehicles with internal combustion engines (ICE). Battery electric vehicles (BEVs) can be said to have zero exhaust emissions only if the electricity used to drive these vehicles is obtained in an environmentally friendly way. It is common knowledge that BEVs have a significantly higher overall mass than conventional vehicles. The significantly higher total vehicle weight of BEVs can have various adverse effects on energy consumption during movement and the vehicle's dynamics. In contrast to the negative aspects of BEVs, there are also positive aspects that are primarily related to the comfort of drivers and passengers, considering the main fact that they do not require the presence of a floor tunnel. In this paper, trends related to BEVs in the previous five years were statistically analysed. Changes in average sizes related to BEVs are shown, primarily internal dimensions that can be of crucial importance when deciding between BEVs and conventional vehicles. In the paper itself, other important trends are presented, both for the electric motor itself and for the batteries used in BEVs.
The environmental performance of current and future passenger vehicles: Life cycle assessment based on a novel scenario analysis framework

Christian Bauer,Johannes Hofer,Hans-Jörg Althaus,Andrea Del Duce,Andrew Simons

DOI: https://doi.org/10.1016/j.apenergy.2015.01.019

IF: 11.2

2015-11-01

Applied Energy

Abstract:This paper contains an evaluation of the environmental performance of a comprehensive set of current and future mid-size passenger vehicles. We present a comparative Life Cycle Assessment (LCA) based on a novel integrated vehicle simulation framework, which allows for consistency in vehicle parameter settings and consideration of future technological progress. Conventional and hybrid gasoline, diesel and natural gas cars as well as battery and fuel cell electric vehicles (BEV and FCV) are analyzed, taking into account electricity and hydrogen production chains from fossil, nuclear and renewable energy resources. Our results show that a substantial mitigation of climate change can be obtained with electric passenger vehicles, provided that non-fossil energy resources are used for electricity and hydrogen production. However, in terms of other environmental burdens such as acidification, particulate matter formation, and toxicity, BEV may in some cases and FCV are likely to perform worse than modern fossil fueled cars as a consequence of emissions along vehicle and fuel production chains. Therefore, the electrification of road transportation should be accompanied by an integration of life cycle management in vehicle manufacturing chains as well as energy and transport policies in order to counter potential environmental drawbacks.

energy & fuels,engineering, chemical
INFLUENCE OF ROAD LONGITUDINAL TERRAIN PROFILE ON VEHICLE KINETIC ENERGY RECOVERY AND MITIGATION OF SELECTED TRANSPORT NEGATIVE ASPECTS

Jan PEČMAN,Ondrej STOPKA,Iwona RYBICKA,Mária STOPKOVÁ

DOI: https://doi.org/10.20858/tp.2023.18.4.10

2023-12-31

Transport Problems

Abstract:In recent years, environmental aspects of transport have been at the center of attention for research concerning sustainable development. The most discussed topics comprise vehicle emission production and fuel consumption. These are influenced by many variables and factors. In addition to individual vehicle characteristics and attributes, engine performances, exhaust systems, and their overall construction designs, the terrain and road profile itself have a non-negligible effect on emission production. Road profile parameters can increase or decrease the total vehicle consumption if its potential is utilized correctly. This manuscript discusses the options to reduce road vehicle consumption while accelerating where its velocity is decreased and yet again increased when using the longitudinal terrain profile principle. The physical relations for this subject are presented in the manuscript as well. Based on the data and knowledge achieved, the manuscript then addresses several scenarios in which the fuel consumption of the examined vehicle and an occurrence of certain emission types are examined. Lastly, multiple development trends that can positively affect the specified road vehicle’s negative effects on the environment are described. The novel approach of the conducted research consists primarily of the interdisciplinary connection between road transport planning and vehicle traffic study (i.e., negative environmental aspects resulting from road transport can be mitigated not only by assistant devices installed in vehicles, such as catalytic converters, solid particle filters but also by constructing judiciously designed roads).
Life Cycle Assessment of Plug-In Hybrid Electric Vehicles Considering Different Vehicle Working Conditions and Battery Degradation Scenarios

Yaning Zhang,Ziqiang Cao,Chunmei Zhang,Yisong Chen

DOI: https://doi.org/10.3390/en17174283

IF: 3.2

2024-08-29

Energies

Abstract:This study establishes a life cycle assessment model to quantitively evaluate and predict material resource consumption, fossil energy consumption and environmental emissions of plug-in hybrid electric vehicles (PHEVs) by employing the GaBi software. This study distinguishes the environmental impact of different vehicle working conditions, power battery degradation scenarios, and mileage scenarios on the operation and use stages of PHEVs, BEVs, and HEVs. The findings indicate that under urban, highway, and aggressive driving conditions, PHEVs' life cycle material resource and fossil fuel consumption exceed that of BEVs but are less than HEVs. Battery degradation leads to increased material resource consumption, energy use, and environmental emissions for both PHEVs and BEVs. When the power battery degrades to 85%, the material resource and fossil energy consumption during the operation and use phase increases by 51.43%, 72.68% for BEVs and 29.37%, 36.21% for PHEVs compared with no degradation, respectively, indicating that the environmental impact of BEVs are more sensitive than those of PHEVs to the impact of power battery degradation. Among different mileage scenarios, PHEVs demonstrate the lowest sensitivity to increased mileage regarding life cycle material resource consumption, with the smallest increase. Future projections for 2025 and 2035 suggest life cycle GWP of HEV, PHEV and BEV in 2035 is 1.21 × 104, 1.12 × 104 and 1.01 × 104 kg CO2-eq, respectively, which shows reductions of 48.7%, 30.9% and 36.1% compared with those in 2025. The outcomes of this study are intended to bolster data support for the manufacturing and development of PHEV, BEV and HEV under different scenarios and offer insights into the growth and technological progression of the automotive sector.

energy & fuels
Prospective Environmental Impacts of Passenger Cars under Different Energy and Steel Production Scenarios

Michael Samsu Koroma,Nils Brown,Giuseppe Cardellini,Maarten Messagie

DOI: https://doi.org/10.3390/en13236236

IF: 3.2

2020-11-26

Energies

Abstract:The potential environmental impacts of producing and using future electric vehicles (EVs) are important given their expected role in mitigating global climate change and local air pollutants. Recently, studies have begun assessing the effect of potential future changes in EVs supply chains on overall environmental performance. This study contributes by integrating expected changes in future energy, iron, and steel production in the life cycle assessment (LCA) of EVs. In this light, the study examines the impacts of changes in these parameters on producing and charging future EVs. Future battery electric vehicles (BEV) could have a 36–53% lower global warming potential (GWP) compared to current BEV. The change in source of electricity generation accounts for 89% of GWP reductions over the BEV’s life cycle. Thus, it presents the highest GWP reduction potential of 35–48%. The use of hydrogen for direct reduction of iron in steelmaking (HDR-I) is expected to reduce vehicle production GWP by 17% compared to current technology. By accounting for 9% of the life cycle GWP reductions, HDR-I has the second-highest reduction potential (1.3–4.8%). The results also show that the potential for energy efficiency improvement measures for GWP reduction in vehicle and battery manufacture would be more beneficial when applied now than in the distant future (2050), when the CO2 intensity of the EU electricity is expected to be lower. Interestingly, under the same conditions, the high share of renewable energy in vehicle supply chains contributed to a decrease in all air pollution-related impact categories, but an increase in toxicity-related categories, as well as land use and water consumption.

energy & fuels
Factors impacting real-world fuel economy of plug-in hybrid electric vehicles in Europe – An empirical analysis

Ahmet Mandev,Patrick Plötz,Frances Sprei

DOI: https://doi.org/10.1088/2515-7620/ad419f

2024-04-23

Environmental Research Communications

Abstract:Plug-in hybrid electric vehicles (PHEVs) combine an electric motor with an internal combustion engine and can reduce greenhouse gas emissions from transport if mainly driven on electricity. The environmental benefit of PHEVs strongly depends on its usage and charging behavior. Several studies have demonstrated low electric driving shares (EDS) of many PHEVs. However, there is limited evidence on which vehicle properties affect the EDS of PHEVs to which extent. Here, we provide an empirical and quantitative analysis of real-world EDS and fuel consumption and look at how they are impacted by factors related to vehicle properties such as range, system power and mass. We complement previous studies on real-world EDS and fuel consumption of PHEVs by combining two different data sets, with almost 100,000 vehicles in total, over 150 models in 41 countries, which is combined the largest PHEV sample in Europe to date to be analyzed in the literature. We find that an increase of 10 km of type approval range leads on average to 13 – 17 % fuel consumption decrease and 1 – 4 % EDS increase. Furthermore, a 1 kW increase in system power per 100 kg of vehicle mass is associated with an average increase of 7 – 9 % in fuel consumption and a decrease of up to 2% in EDS. We also find that long-distance driving and charging behavior are the largest non-technical factors for the deviation between type-approval and real-world data. Furthermore, PHEV fuel consumption and related tail-pipe emissions in Europe are on average higher than official EU values.

environmental sciences

Studies on the development of Plasmodium vivax in Anopheles subpictus.

A Life Cycle Environmental Impact Comparison between Traditional, Hybrid, and Electric Vehicles in the European Context

Impact of the Electric Mobility Implementation on the Greenhouse Gases Production in Central European Countries

Sensitivity Analysis in the Life-Cycle Assessment of Electric vs. Combustion Engine Cars under Approximate Real-World Conditions

Electric Vehicles from an Economic Point of View

Accurate energy consumption for comparison of climate change impact of thermal and electric vehicles

Comparative life cycle assessment of sport utility vehicles with different fuel options

The Impact of Vehicle Technology, Size Class, and Driving Style on the GHG and Pollutant Emissions of Passenger Cars

Exhaust Emissions and Energy Consumption Analysis of Conventional, Hybrid, and Electric Vehicles in Real Driving Cycles

The Influence of Power Sources for Charging the Batteries of Electric Cars on CO2 Emissions during Daily Driving: A Case Study from Poland

Emission from Internal Combustion Engines and Battery Electric Vehicles: Case Study for Poland

Environmental impact assessment of the electric vehicles: A case study

Control of disease progress in Mycobacterium avium-infected AIDS patients.

Minor magnesium doping in P-type layer of InGaN/GaN MQW LED to enhance electrical and optical properties

BEVSIM: Battery electric vehicle sustainability impact assessment model

Statistical analysis of trends in Battery Electric Vehicles: Special reference to vehicle weight reduction, electric motor, battery, and interior space dimensions

The environmental performance of current and future passenger vehicles: Life cycle assessment based on a novel scenario analysis framework

INFLUENCE OF ROAD LONGITUDINAL TERRAIN PROFILE ON VEHICLE KINETIC ENERGY RECOVERY AND MITIGATION OF SELECTED TRANSPORT NEGATIVE ASPECTS

Life Cycle Assessment of Plug-In Hybrid Electric Vehicles Considering Different Vehicle Working Conditions and Battery Degradation Scenarios

Prospective Environmental Impacts of Passenger Cars under Different Energy and Steel Production Scenarios

Factors impacting real-world fuel economy of plug-in hybrid electric vehicles in Europe – An empirical analysis