Job losses set to hit emergency departments.

N. Lipley

DOI: https://doi.org/10.7748/en.14.3.3.s8

2006-06-01

Emergency Nurse

Abstract:Emergency nurses across the country have been warned to brace themselves as trusts cut jobs to offset actual or projected financial deficits.

What problem does this paper attempt to address?

Mechanically and Electronically Robust Transparent Organohydrogel Fibers

Jianchun Song,Shuo Chen,Lijie Sun,Yifan Guo,Luzhi Zhang,Shuliang Wang,Huixia Xuan,Qingbao Guan,Zhengwei You

DOI: https://doi.org/10.1002/adma.201906994

Abstract:Stretchable conductive fibers are key elements for next-generation flexible electronics. Most existing conductive fibers are electron-based, opaque, relatively rigid, and show a significant increase in resistance during stretching. Accordingly, soft, stretchable, and transparent ion-conductive hydrogel fibers have attracted significant attention. However, hydrogel fibers are difficult to manufacture and easy to dry and freeze, which significantly hinders their wide range of applications. Herein, organohydrogel fibers are designed to address these challenges. First, a newly designed hybrid crosslinking strategy continuously wet-spins hydrogel fibers, which are transformed into organohydrogel fibers by simple solvent replacement. The organohydrogel fibers show excellent antifreezing (< -80 °C) capability, stability (>5 months), transparency, and stretchability. The predominantly covalently crosslinked network ensures the fibers have a high dynamic mechanical stability with negligible hysteresis and creep, from which previous conductive fibers usually suffer. Accordingly, strain sensors made from the organohydrogel fibers accurately capture high-frequency (4 Hz) and high-speed (24 cm s-1 ) motion and exhibit little drift for 1000 stretch-release cycles, and are powerful for detecting rapid cyclic motions such as engine valves and are difficult to reach by previously reported conductive fibers. The organohydrogel fibers also demonstrate potential as wearable anisotropic sensors, data gloves, soft electrodes, and optical fibers.
Highly Stretchable Photonic Crystal Hydrogels for a Sensitive Mechanochromic Sensor and Direct Ink Writing

Jiayao Chen,Lirong Xu,Meijia Yang,Xiaochuan Chen,Xudong Chen,Wei Hong

DOI: https://doi.org/10.1021/acs.chemmater.9b02961

IF: 10.508

2019-09-16

Chemistry of Materials

Abstract:Photonic crystals, which are materials with periodic dielectric constants on the submicroscale, have been the focus of research for an extended period. Photonic soft materials have been extensively developed for use as colorimetric indicators and mechanochromic sensors, but their limited mechanical properties and molding characteristics only suitable for films restrict their practical implementation. Herein we report an approach to synthesize highly stretchable photonic soft materials based on a hydrogel system that is cross-linked by a crystalline colloidal array. The intrinsic inhomogeneous submicroscale structure is exploited for effective reinforcement in the multiphase system of the photonic crystals. The photonic hydrogels exhibit a high deformation capacity, with a stretching deformation above 2800% and compression above 98%. The gel has a full-color tunable range and shows 460 nm photonic shifts that can be reversibly actuated by a small compressive stress (kPa level) and can be ink-written to form patterns and freestanding structures. Mechanochromic sensors are constructed based on the three-dimensional and two-dimensional Bragg diffraction of the gel. Owing to its mechanical strength, formability, and tunable colors, the gel can be used in wearable optical devices, colorimetric tactile sensors, and full-color displays.

materials science, multidisciplinary,chemistry, physical
A κ-Carrageenan-Containing Organohydrogel with Adjustable Transmittance for an Antifreezing, Nondrying, and Solvent-Resistant Strain Sensor

Guangchao Zheng,Wei Gao,Xue Li,Zhiqiang Wu,Lin-An Cao,Enke Feng,Zhiming Yang

DOI: https://doi.org/10.1021/acs.biomac.2c01044

2022-11-14

Biomacromolecules

Abstract:Gel polymers are widely used in different fields due to their unique properties, especially in flexible electronic devices. However, developing multienvironmentally-tolerant (antifreezing, antidrying, and solvent-resistant) gel polymer-based soft electronics is still a significant challenge. Herein, a binary solvent system-based versatile organohydrogel is designed and successfully prepared, which exhibits superior stretchability, favorable self-adhesive properties, prominent temperature tolerance, and excellent solvent-resistant capabilities. Furthermore, the as-assembled organohydrogel-based sensor demonstrates a satisfied sensitivity (GF = 1.8), wide strain range (5-500%), and outstanding human motion detection. Meanwhile, the obtained organohydrogel can also serve as an all-weather sensor for achieving precise and reliable mechanical sensing in a wide temperature range from -50 to 50 °C and diverse liquid media consisting of water, toluene, and carbon tetrachloride. Interestingly, the organohydrogel displays a repeatable transmittance change behavior in water and dimethyl sulfoxide, based on this feature, which could realize the functional applications for recording and erasing information. It is envisioned that these superior performances render the as-prepared organohydrogel suitable to develop future advanced soft electronics with multienvironmental tolerance.
Nanocellulose-templated carbon nanotube enhanced conductive organohydrogel for highly-sensitive strain and temperature sensors

Yuan Wei,Yangyang Qian,Penghui Zhu,Lijing Xiang,Chunfa Lei,Ge Qiu,Chunyu Wang,Yikang Liu,Yijun Liu,Gang Chen

DOI: https://doi.org/10.1007/s10570-022-04516-7

IF: 6.123

2022-03-18

Cellulose

Abstract:Conductive hydrogels have garnered wide interest for various promising applications, such as wearable devices, electronic skins, and intelligent robots. However, these hydrogels still suffer from weak mechanical properties, poor environmental stability, and low sensitivity. Here, we report a conductive organohydrogel that is easily synthesized by a one-step acrylamide polymerization in the presence of cellulose nanofiber (CNF)-templated carbon nanotube (CNT) hybrids and glycerol-water binary solvent. The uniformly dispersed CNF/CNT nanohybrids act as a reinforced and conductive skeleton, which synergistically endows the organohydrogel with excellent tensile strength (≈ 119.2 kPa) and high electronic conductivity (≈ 2.7 mS cm−1). Moreover, the synergy of glycerol-water solvent network and polyacrylamide (PAAm) polymer matrix provides an ultra-stretchability (up to 1343%) and skin-like modulus (≈ 17.7 kPa), which can well match the dynamic human–machine interface. Furthermore, the organohydrogels exhibit excellent flexibility under an extreme temperature (< − 24 °C) and maintain the long-term water-retention capability in an open environment (> 10 days), owing to the glycerol-enhanced H-bonding interface interactions. Benefiting from these high performances, our organohydrogel can be employed for preparing multifunctional sensing devices, which display high sensitivity to external strains (gauge factor = 10.03) and dynamic temperature changes (temperature coefficient of resistance = − 1.081% °C−1), superior to the most reported samples. Our results pave the way for simple and practical systems that fulfill the requirements of intelligent electronic devices.

materials science, textiles,polymer science, paper & wood
Tough Gel-Fibers as Strain Sensors Based on Strain–Optics Conversion Induced by Anisotropic Structural Evolution

Tao Chen,Xiaolan Qiao,Peiling Wei,Guoyin Chen,Innocent Tendo Mugaanire,Kai Hou,Meifang Zhu

DOI: https://doi.org/10.1021/acs.chemmater.0c03342

IF: 10.508

2020-11-12

Chemistry of Materials

Abstract:The advocacy of smart living results in a high demand for wearable and flexible sensors to monitor human motions. Among these, sensors based on strain–optics conversion are attractive due to their inherent electrical safety and electromagnetic immunity in comparison to strain–electricity conversion sensors. Particularly, hydrogel-based optical fiber sensors are biocompatible, flexible, and stretchable and thus are potentially applicable to health monitoring, human–machine intelligence, and soft robots. Nonetheless, hydrogel-based optical fibers still demonstrate challenges such as limited stretch ratios from chemical cross-linking networks and insufficient light transmittance from dehydration or nucleation of water. Herein, flexible and stretchable strain sensors based on glycerol-introducing nanocomposite hydrogel fibers (GN-Fibers) were achieved via dynamic stretching of a reactive pregel from monomer/nanoparticle hybrid precursors in a glycerol–water cosolvent. The resultant GN-Fibers evolved with anisotropic microstructures, displaying excellent tensile strength (9.76 MPa), high elastic modulus (32.63 MPa), low light propagation attenuation (0.26 dB cm–1), and broad strain range. Owing to the use of glycerol–water, such GN-Fibers also exhibited long-term moisture-retaining and antifreezing properties. In addition, GN-Fibers functioned well as sensors based on strain–optics conversion to monitor stretching and compressing behaviors. It is believed that such an optical fiber based strain sensor is a gateway to fabrication of next-generation wearable and flexible devices for health monitoring or artificial intelligence.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c03342?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c03342</a>.Additional data concerning compositions and mechanical properties of GN-Fibers, rheological data, FT-IR spectra, micromorphology of GN-Fibers, mechanical property comparison with H-Fibers, DSC data of GN-Fibers with various glycerol contents, mechanical and light propagation attenuation properties of GN-Fibers with different humidities and temperatures, WAXS data in reciprocal space and azimuthal WAXS curves, refractive index of precursors, hydrogels, and GN-Fibers, light reflectance of clay nanoplatelets, and tensile properties and sensing reliability with time (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c03342/suppl_file/cm0c03342_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical
Tough and Transparent Photonic Hydrogel Nanocomposites for Display, Sensing, and Actuation Applications

Liqian Zhu,Yaru Meng,Jie Zhou,Ying Hu,Shuyuan Gao,Shuo Li,Jianguo Liu,Shengjie Wang,Yongqing Xia

DOI: https://doi.org/10.1021/acsanm.3c00889

IF: 6.14

2023-04-17

ACS Applied Nano Materials

Abstract:Thermosensitive hydrogels with periodic dielectric structures displaying tunable structural color by temperature stimuli have attracted much research interest recently. However, reported thermosensitive photonic hydrogels either using the poly(N-isopropylacrylamide) (PNIPAM) bulk hydrogel as the responsive matrix or using PNIPAM microgels as the photonic building blocks have poor mechanical strength. Moreover, the expensive and time-consuming preparation process also limits their further application. In this work, a different strategy for preparing PNIPAM-based photonic hydrogel nanocomposite films with strong mechanical strength is proposed by incorporating a PNIPAM microgel film with the polyacrylamide (PAM) hydrogel. The preparation process is simple but efficient, and the obtained nanocomposite films have tunable mechanical strength by changing the crosslinking degree of the PAM hydrogels. More interestingly, the structural color of the nanocomposite films can be retained up to 80 °C (at least), much higher than those of previously reported PNIPAM-based photonic materials. In addition to being thermochromic, the film is sensitive to humidity, and the structural color-changing process is similar to the molting process of cicadas. Furthermore, the nanocomposite films have synchronous shape deformations and color changes and can be used as color-tunable soft actuators. The microgel film-capped photonic hydrogels provide a new strategy for the preparation of thermoresponsive photonic hydrogels and structural color-tunable actuators.

materials science, multidisciplinary,nanoscience & nanotechnology
Aldehyde modified cellulose-based dual stimuli responsive multiple cross-linked network ionic hydrogel toward ionic skin and aquatic environment communication sensors

Xuewen Han,Zhenxing Wang,Zijing Zhou,Yukang Peng,Tao Zhang,Heyu Chen,Sijie Wang,Junwen Pu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.126533

IF: 8.2

2023-08-29

International Journal of Biological Macromolecules

Abstract:Recently, materials with complicated environmentally-sensitive abilities, high stretchability and excellent conductive sensitivity are interesting actuators in future applications. Herein, we fabricated a versatile and facile polyvinyl alcohol/polyacrylic acid/dialdehyde cellulose nanofibrils-Fe 3+ hydrogel integrated with programmable dual-shape memory properties, high mechanical strength, good recoverability, and heat-induced self-healing capability. Benefiting from the synergistic effect of hydrogen bonds and dual metal coordination bonds of cellulose-based dialdehyde and carboxyl with Fe 3+ and then heating-freeze-thawing cycle treatment, the obtained hydrogel exhibited dual shape memory abilities, high tensile strain (up to 600 %), good self-recovery, and anti-fatigue properties. Moreover, the resultant hydrogel sensors showed revealed high strain sensitivity (gauge factor = 2.95) and satisfactory electrochemical performance; and such hydrogel-based sensor could be used as ionic skin to detect various human motions in real-time and barrier-free communication in the aquatic environment. The composite hydrogel with superior and versatile performances reported in this study could offer a great promise to be applied under extreme conditions as multifunctional sensors.

polymer science,biochemistry & molecular biology,chemistry, applied
Bioderived Composite Hydrogel Sensor: Combining Superstretchability, Moisture Retention, and Temperature Resistance for Strain and Temperature Visualization

Wenxiang Zheng,Ghulam Murtaza,Niu Zhang,Lei Wu,Zihui Meng,Lili Qiu

DOI: https://doi.org/10.1021/acsapm.4c00066

2024-03-13

ACS Applied Polymer Materials

Abstract:Photonic crystals (PCs) exhibit the ability to adjust their microstructure and structural color in response to environmental stimuli and have been applied in optical manipulation and visual sensing, which showcase dynamic adaptability to changing conditions. In this study, a bioderived composite hydrogel sensor was prepared utilizing fish collagen, acrylamide, N-isopropylacrylamide, and PCs for the dual visualization of strain and temperature. Fish collagen derived from tilapia skin enhanced its mechanical properties with a 1846.29% tensile strain. Glycerol contributed to both moisturization and temperature stability, preserving the material’s mechanical integrity even under extreme conditions of 60 and −53 °C. The reflection peak of the sensor exhibited blue shifts of 146 nm with 10% compression and 120 nm with 12% tensile strain. Additionally, the reflection peak experienced a blue shift of 45 nm as the temperature rose from 25 to 37 °C, and this shift remained stable even after 10 cycles. Moreover, the sensor’s ability to visualize strain and temperature remained consistent even after a period of 30 days. Given its mechanical robustness, moisture resistance, temperature resilience, and durability, the bioderived composite hydrogel sensor stands as a viable choice for ongoing, prolonged monitoring of strain and temperature in wearable research studies.

polymer science,materials science, multidisciplinary
Wearable and Robust Polyimide Hydrogel Fiber Textiles for Strain Sensors

Mengmeng Li,Xian Chen,Xiuting Li,Jie Dong,Xin Zhao,Qinghua Zhang

DOI: https://doi.org/10.1021/acsami.1c10055

2021-09-01

Abstract:Conductive ionic hydrogel fibers and textiles with excellent mechanical properties and chemical stability are requested for flexible and wearable electronic devices, strain sensors, and even artificial skin. However, most of the reported hydrogel fibers are not suitable in complex environments, especially in alkaline solutions and organic solvents due to their poor chemical stability. Herein, we report ionic polyimide hydrogel fibers derived from an organosoluble polyimide salt that can be continuously and rapidly prepared via a facile wet spinning method. Thanks to their ion-rich property and robust skeletal structure, the obtained ionic polyimide hydrogel fibers showed an excellent conductivity of ∼21 mS/cm and outstanding mechanical properties with a tensile strength of 2.5 MPa and breaking elongation of 215%. Furthermore, the as-prepared fibers could be easily woven to form integral textiles, endowing them with good wearable properties. Accordingly, facile strain sensors assembled by polyimide hydrogel fibers show a linear response with high sensitivity and good cycling stability, which have great potential for applications in wearable and flexible strain sensors under diverse complex environments.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10055.1H NMR spectra, ATR–FTIR spectra, mechanical performance and conductivity of various PI hydrogel fibers, digital photos of the HPIF–CaCl2 hydrogel fiber treated under different pH values and solvents, and their relative resistance change curves (PDF).This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Cellulose Nanofibrils Enhanced, Strong, Stretchable, Freezing‐Tolerant Ionic Conductive Organohydrogel for Multi‐Functional Sensors

Yuhang Ye,Yifan Zhang,Yuan Chen,Xiaoshuai Han,Feng Jiang

DOI: https://doi.org/10.1002/adfm.202003430

IF: 19

2020-07-14

Advanced Functional Materials

Abstract:To date, ionic conducting hydrogel attracts tremendous attention as an alternative to the conventional rigid metallic conductors in fabricating flexible devices, owing to their intrinsic characteristics. However, simultaneous realization of high stiffness, toughness, ionic conductivity, and freezing tolerance through a simple approach is still a challenge. Here, a novel highly stretchable (up to 660%), strong (up to 2.1 MPa), tough (5.25 MJ m−3), and transparent (up to 90%) ionic conductive (3.2 S m−1) organohydrogel is facilely fabricated, through sol–gel transition of polyvinyl alcohol and cellulose nanofibrils (CNFs) in dimethyl sulfoxide‐water solvent system. The ionic conductive organohydrogel presents superior freezing tolerance, remaining flexible and conductive (1.1 S m−1) even at −70 °C, as compared to the other reported anti‐freezing ionic conductive (organo)hydrogel. Notably, this material design demonstrates synergistic effect of CNFs in boosting both mechanical properties and ionic conductivity, tackling a long‐standing dilemma among strength, toughness, and ionic conductivity for the ionic conducting hydrogel. In addition, the organohydrogel displays high sensitivity toward both tensile and compressive deformation and based on which multi‐functional sensors are assembled to detect human body movement with high sensitivity, stability, and durability. This novel organohydrogel is envisioned to function as a versatile platform for multi‐functional sensors in the future.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Deformation Drives Alignment of Nanofibers in Framework for Inducing Anisotropic Cellulose Hydrogels with High Toughness

Dongdong Ye,Qiaoyun Cheng,Qianlei Zhang,Yixiang Wang,Chunyu Chang,Liangbin Li,Haiyan Peng,Lina Zhang

DOI: https://doi.org/10.1021/acsami.7b14900

2017-12-13

Abstract:Deformation-driven alignment of macromolecules or nanofibers leading to anisotropy is a challenge in functional soft materials. Here, tough cellulose hydrogels that exhibited deformation-induced anisotropy are fabricated by reacting cellulose with a small amount of epichlorohydrin (EPI) in LiOH/urea solution and subsequent treating with dilute acid. The loosely cross-linked network that was obtained via chemical cross-linking of cellulose with EPI as a large framework maintained the elasticity of hydrogels, whereas nanofibers produced by the acid treatment formed physical cross-linked networks through hydrogen bonds which could efficiently dissipated mechanical energy. Meanwhile, the nanofibers could further aggregate to form submicrobundles and participate in the formation of frameworks during the acid treatment. Under deformation, the nanofibers and submicrobundles in the physical networks synchronize easily to align with the large framework, generating the rapidly responsive birefringence behaviors with highly stable colors. Thus, the cellulose hydrogels possessing sensitively mechano-responsive behavior could be utilized as a dynamic light switch and a soft sensor to accurately detect small external force, respectively. This work opens a novel pathway to construct tough and mechanoresponsive hydrogels via a green conversion of natural polysaccharide.
An Environmental Perception Self‐Adaptive Discolorable Hydrogel Film toward Sensing and Display

Jingze Xue,Mengnan Yao,Guoyong Wang,Zuankai Wang,Liang Shen,Qingping Liu,Yan Liu

DOI: https://doi.org/10.1002/adom.202100116

IF: 9

2021-06-02

Advanced Optical Materials

Abstract:Vision perception, especially color change, is the most direct and convenient way of feedback among numerous information recognition modes. Because of unique discoloration property upon stimulation, photonic crystals have attracted wide attention. Herein, with a facile UV polymerization process under the magnetic field, a sensitive photonic hydrogel film with vivid structural color is made. The structural color comes from the 1D chain-like structures assembled by the carbon-encapsulated Fe3O4 colloidal nanocrystal clusters (Fe3O4@CNCs), which are embedded in the flexible hydrogel matrix. The hydrogel can adapt its size to the environment, resulting in the regulation of intergranular distance and apparent color variation. Thus, a hydrogel film with humidity, ion concentration, and stress responsivity can be obtained, showing high sensitivity, stability, and full reversibility in a wide range of visible spectrum. It can be designed as a reusable display board or applied to colorimetric measurements similar to pH test paper. Innovatively, the hydrogel film is integrated as back reflectors to improve the efficiency of semitransparent polymer solar cells while protecting devices. This structural color hydrogel film makes it easier to recognize environmental dynamic changes and provide a wider application prospect in optics devices, sensing, display, and diagnostics.

materials science, multidisciplinary,optics
Stretchable and sensitive sodium alginate ionic hydrogel fibers for flexible strain sensors

Ruiping Tong,Zhihui Ma,Ping Gu,Rui Yao,Tengfei Li,Mingshun Zeng,Fazhan Guo,Linfeng Liu,Junfei Xu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125683

IF: 8.2

2023-08-01

International Journal of Biological Macromolecules

Abstract:Ionic conductive hydrogel fibers based on natural polymers provide an immense focus for a new generation of electronics due to their flexibility and knittability. The feasibility of utilizing pure natural polymer-based hydrogel fibers could be drastically improved if their mechanical and transparent performances satisfy the requirements of actual practice. Herein, we report a facile fabrication strategy for significantly stretchable and sensitive sodium alginate ionic hydrogel fibers (SAIFs), by glycerol initiating physical crosslinking and by CaCl2 inducing ionic crosslinking. The obtained ionic hydrogel fibers not only show significant stretchability (tensile strength of 1.55 MPa and fracture strain of ∼161 %), but also exhibit wide-range sensing, satisfactorily stable, rapidly responsive, and multiply sensitive abilities to external stimulus. In addition, the ionic hydrogel fibers have excellent transparency (over 90 % in a wide wavelength range), and good anti-evaporation and anti-freezing properties. Furthermore, the SAIFs have been easily knitted into a textile, and successfully applied as wearable sensors to recognize human motions, by observing the output electrical signals. Our methodology for fabrication intelligent SAIFs will shed light on artificial flexible electronics and other textile-based strain sensors.

polymer science,biochemistry & molecular biology,chemistry, applied
Dual-Stimuli-Responsive and Anti-Freezing Conductive Ionic Hydrogels for Smart Wearable Devices and Optical Display Devices.

Yi Li,Yang Jiang,Man Xi,Leihou Shao,Dongmei Lei,Yunchao Xiao

DOI: https://doi.org/10.1021/acsami.3c03920

2023-05-15

Abstract:Stimuli-responsive hydrogels are a class of important materials for the preparation of flexible sensors, but the development of UV/stress dual-responsive ion-conductive hydrogels with excellent tunability for wearable devices remains a major challenge. In this study, a dual-responsive multifunctional ion-conductive hydrogel (PVA-GEL-GL-Mo7) with high tensile strength, good stretchability, outstanding flexibility, and stability is successfully fabricated. The prepared hydrogel has an excellent tensile strength of 2.2 MPa, high tenacity of 5.26 MJ/m3, favorable extensibility (522%), and high transparency of 90%. Importantly, the hydrogels have dual responsiveness to UV light and stress, allowing it to be used as a wearable device while responding differently to the UV intensity of different outdoor environments (hydrogels can show different levels of color when exposed to different light intensities of UV light) and can remain flexible at -50 and 85 °C (sensing at both -25 and 85 °C). Therefore, the hydrogels developed in this study have good prospects in different applications, such as flexible wearable devices, duplicate paper, and dual-responsive interactive devices.

Engineering,Medicine,Materials Science
Cellulose nanofibers/liquid metal hydrogels with high tensile strength, environmental adaptability and electromagnetic shielding for temperature monitoring and strain sensors

Yushan Zou,Zhengyu Liao,Rui Zhang,Shanshan Song,Yutong Yang,Di Xie,Xinru Liu,Lishi Wei,Yi Liu,Yongming Song

DOI: https://doi.org/10.1016/j.carbpol.2024.122788

IF: 10.723

2024-09-29

Carbohydrate Polymers

Abstract:Hydrogel sensors are widely recognized in the fields of flexible electronics and human motion monitoring due to their multiple properties and potential applications. However, how to prepare hydrogels with multiple excellent properties simultaneously and how to improve the compatibility of conductive fillers with hydrogel matrices remain a major challenge. Therefore, in this work, liquid metal (LM) droplets stabilized by cellulose nanofibers (CNFs) were utilized to initiate the polymerization of acrylamide monomer (Am), which was used as a conductive filler. Meanwhile, reduced graphene oxide (rGO) was introduced to bridge the LM droplets. The hydrogels were then further crosslinked in glycerol. The constructed CNF@LM/polyacrylamide/rGO/gelatin/glycerol hydrogel possesses high tensile properties (>1317 %), high environmental adaptability (−80 to 80 °C), and adhesion properties for multifunctional sensing. What's more, it offers the high sensitivity of both a strain sensor and a temperature sensor for accurate monitoring of human movement at room temperature and even in extreme environments. In addition, this hydrogel has excellent electromagnetic shielding properties and antimicrobial properties. This research opens up a new direction for the preparation of multifunctional hydrogel sensors, expanding their applications in cutting-edge fields such as temperature monitoring, wearable smart devices, e-skin and intelligent robotics.

polymer science,chemistry, organic, applied
Wearable Optical Sensing of Strain and Humidity: A Patterned Dual‐Responsive Semi‐Interpenetrating Network of a Cholesteric Main‐Chain Polymer and a Poly(ampholyte)

Xiuyi Shi,Zixuan Deng,Pei Zhang,Yao Wang,Guofu Zhou,Laurens T. Haan

DOI: https://doi.org/10.1002/adfm.202104641

IF: 19

2021-08-07

Advanced Functional Materials

Abstract:Main-chain cholesteric liquid crystal polymers are a promising candidate for the development of responsive photonic devices due to the combination of selective reflection and soft, elastic properties, but it is difficult to enhance these materials with new kinds of responsiveness due to the inherent lack of mesogenic side groups. Here, a new strategy is showed to obtain a dual-responsive elastic cholesteric polymer material by preparing a semi-interpenetrating network consisting of a cholesteric main-chain polymer and a hygroscopic poly(ampholyte). The material is shown to undergo a redshift of the reflected color upon swelling with water, while the color blueshifts when a strain is applied. Color patterns can be prepared by localized photopolymerization at different temperatures, leading to brightly colored responsive images with high contrast. Due to the elastic nature of the material, it can easily be made into a wearable device, and its application as a multifunctional smart sensor for sweat detection and movement detection is demonstrated. The results show that new responsiveness can be added to main-chain cholesteric polymers by preparation of interpenetrating networks, which can be further extended to develop various kinds of multi-responsive smart materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
The '2-week rule' for suspected breast carcinoma: a qualitative study of the views of patients and professionals.

C. Cornford,J. Harley,N. Oswald

2004-08-01

Abstract:BACKGROUND The '2-week rule' for the referral of patients with potential cancers is an important but controversial development. AIMS To investigate the 2-week rule for women with breast problems from the perspective of the patients and of healthcare professionals. DESIGN OF STUDY Qualitative study using semi-structured interviews. SETTING Patients referred to two breast care units and professionals from primary and secondary care in Teesside and Hartlepool. METHOD Semi-structured interviews with a purposive sample of 12 patients referred under the 2-week rule and 20 professionals. RESULTS All women experienced considerable worries in the time leading up to diagnosis. This affected relationships with others, and they used selective telling to help maintain control over their own anxiety and prevent anxiety in others. They were not aware of the 2-week rule as a new initiative, but wanted quick referral to assure them that they did not have cancer. Patients felt they needed more information about breast symptoms and the referral process. Comments about communication with professionals, both good and poor, were frequent in their accounts, which contrasted with the absence of such concerns in the accounts of the professionals. The professionals thought that the 2-week rule was advantageous in reducing anxiety, but thought that disadvantages included longer waits for patients referred outside the rule and increased pressure on hospital services. Cultural changes, including increased patient assertiveness and 'breast awareness', were considered important contextual factors. General practitioners (GPs) were concerned about missing diagnoses in patients statistically unlikely to have carcinomas. CONCLUSION Differences in emphasis were apparent, with patients wanting to be assured that they did not have cancer, specialists concerned both about increased workload and the impact on patients with cancers, and GPs anxious about missing diagnoses. The 2-week rule compromises professional autonomy, which partially accounts for the anger directed against it. There is a need for patients to have more information, and they place great value on good communication. All patient responders experienced significant distress while waiting to be seen.
A Fluorescent Hydrogel with AIE Emission for Dehydration‐Visualizable Wearable Sensors

Yanru Liu,Yali Li,Shengsheng Yu,Kaikai Niu,Hui Liu,Ling‐Bao Xing,Shuanhong Ma

DOI: https://doi.org/10.1002/marc.202400279

IF: 5.006

2024-06-01

Macromolecular Rapid Communications

Abstract:Hydrogel‐based wearable sensors eventually experience dehydration, which negatively impacts their function, leading to decreased sensitivity. Monitoring the real‐time water retention rate and sensing performance of wearable flexible sensors without dismantling them remains a significant difficulty. In this study, we develop and produce a molecule having aggregation‐induced emission (AIE) properties in an aqueous environment, which can combine with anionic guar gum (GG) and acrylic acid (AAc) to create an AIE hydrogel. Wearable sensing electronic devices have the capability to track motion signals at various joints of the human body. Additionally, they can effectively and visually monitor dehydration status during extended periods of operation. The fluorescence intensity of the hydrogel is primarily influenced by the level of aggregation of luminous monomers inside the network. This level of aggregation is predominantly governed by the hydrogel's water retention rate. Hence, the extended duration of hydrogel dehydration can be manifested through alterations in their fluorescence characteristics, which are employed for strain sensing. This approach enables users to assess the water retention of hydrogels with greater efficiency, eliminating the requirement for disassembling them from the completed electrical gadget. In summary, the use of AIE‐based fluorescent hydrogels will advance the progress of intelligent wearable electronics. This article is protected by copyright. All rights reserved

polymer science
Ionic conductive konjac glucomannan/liquid crystal cellulose composite hydrogels with dual sensing of photo- and electro-signals capacities as wearable strain sensors

Xintong Hu,Jianhua Wang,Shiqiang Song,Wenjun Gan,Weizhen Li,Hechuang Qi,Yong Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2023.129038

Abstract:The ionic conductive hydrogel-based sensor exhibits wide applications in wearable electronic devices. However, the strength and ductility trade-off, multimodal requirements, and water-soluble polymer alternatives are significant challenges for the hydrogel-based sensor. Herein, a stretchable and conductive hydrogel is developed with a double network formed by incorporating polyacrylamide and ionic liquid into the konjac glucomannan network. The hydrogel displays significantly enhanced mechanical properties, and good tear/puncture resistance owing to the existence of covalent and non-covalent interactions. In addition, by the introduction of nematic liquid crystal hydroxypropyl cellulose, the hydrogel/cellulose-based strain sensor demonstrates excellent sensing performance in monitoring human motions and writing recognition ability with optical and electrical bimodal sensing response. This work provides new insights to further expand the options of hydrogel-based sensor matrix and to construct bimodal sensors.
Wearable nanocomposite hydrogel temperature sensor based on thermally-switchable and mechanical-deformation-insensitive structural colors

Jiahui Wang,Yanjing Sun,Pan Jia,Jingxuan Su,Xin Zhang,Na Wu,Haitao Yu,Yanlin Song,Jinming Zhou

DOI: https://doi.org/10.1016/j.cej.2023.146602

IF: 15.1

2023-10-15

Chemical Engineering Journal

Abstract:Smart and flexible nanocomposite materials with structural colors have great potentials in the field of wearable sensors. However, the mechanochromic property of conventional photonic materials severely interferes with the optical signal outputs that are tunable by non-strain stimuli, which greatly impedes their applications in wearable photonic sensors. Herein, a wearable nanocomposite hydrogel temperature sensor based on thermally-switchable structural colors that are independent of mechanical deformations, is fabricated by the facile in-situ gelation of N -isopropyl acrylamide (NIPAM), nanoclay discs, carbon black, and monodisperse silica or polymeric NPs in their aqueous dispersions. The resulting non-assembled arrangements of the monodisperse NPs account for uniform structural color independent of mechanical deformations and observation angles. Simultaneously, the temperature-induced reconfiguration of the physically cross-linked poly-NIPAM hydrogel matrix, leads to super-large volume changes and in turn wide-range structural color shifts in almost the entire visible spectrum. The smart hydrogel matrix with homogenous polymer chain length by dynamic physical cross-linkings among exfoliated nanoclay discs, makes the photonic hydrogel robust, stretchable, and self-healable. The combination of mechanical-deformation-insensitive and thermally-switchable structural colors in the nanocomposite hydrogel enables skin-based wearable temperature sensing with naked-eye detection. This work opens a new platform for diverse non-invasive wearable photonic sensors beyond the current strain sensing.

engineering, chemical, environmental

Job losses set to hit emergency departments.

Mechanically and Electronically Robust Transparent Organohydrogel Fibers

Highly Stretchable Photonic Crystal Hydrogels for a Sensitive Mechanochromic Sensor and Direct Ink Writing

A κ-Carrageenan-Containing Organohydrogel with Adjustable Transmittance for an Antifreezing, Nondrying, and Solvent-Resistant Strain Sensor

Nanocellulose-templated carbon nanotube enhanced conductive organohydrogel for highly-sensitive strain and temperature sensors

Tough Gel-Fibers as Strain Sensors Based on Strain–Optics Conversion Induced by Anisotropic Structural Evolution

Tough and Transparent Photonic Hydrogel Nanocomposites for Display, Sensing, and Actuation Applications

Aldehyde modified cellulose-based dual stimuli responsive multiple cross-linked network ionic hydrogel toward ionic skin and aquatic environment communication sensors

Bioderived Composite Hydrogel Sensor: Combining Superstretchability, Moisture Retention, and Temperature Resistance for Strain and Temperature Visualization

Wearable and Robust Polyimide Hydrogel Fiber Textiles for Strain Sensors

Cellulose Nanofibrils Enhanced, Strong, Stretchable, Freezing‐Tolerant Ionic Conductive Organohydrogel for Multi‐Functional Sensors

Deformation Drives Alignment of Nanofibers in Framework for Inducing Anisotropic Cellulose Hydrogels with High Toughness

An Environmental Perception Self‐Adaptive Discolorable Hydrogel Film toward Sensing and Display

Stretchable and sensitive sodium alginate ionic hydrogel fibers for flexible strain sensors

Dual-Stimuli-Responsive and Anti-Freezing Conductive Ionic Hydrogels for Smart Wearable Devices and Optical Display Devices.

Cellulose nanofibers/liquid metal hydrogels with high tensile strength, environmental adaptability and electromagnetic shielding for temperature monitoring and strain sensors

Wearable Optical Sensing of Strain and Humidity: A Patterned Dual‐Responsive Semi‐Interpenetrating Network of a Cholesteric Main‐Chain Polymer and a Poly(ampholyte)

The '2-week rule' for suspected breast carcinoma: a qualitative study of the views of patients and professionals.

A Fluorescent Hydrogel with AIE Emission for Dehydration‐Visualizable Wearable Sensors

Ionic conductive konjac glucomannan/liquid crystal cellulose composite hydrogels with dual sensing of photo- and electro-signals capacities as wearable strain sensors

Wearable nanocomposite hydrogel temperature sensor based on thermally-switchable and mechanical-deformation-insensitive structural colors