Pig parts for people?

M. Lemonick

Abstract:

What problem does this paper attempt to address?

Unveiling lignin structures and lignin-carbohydrate complex (LCC) linkages of bamboo ( Phyllostachys pubescens ) fibers and parenchyma cells

Ziwen Lv,Ziyi Bai,Liyuan Su,Jun Rao,Yajie Hu,Rui Tian,Siyu Jia,Ying Guan,Baozhong Lü,Feng Peng

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124461

IF: 8.2

2023-04-26

International Journal of Biological Macromolecules

Abstract:Bamboo ( Phyllostachys pubescens ) is an attractive biomass block to develop biorefining industry, however, less emphasis has been placed on elucidating the chemical linkage variations of lignin and LCC between different bamboo cell walls. Here, purified milled wood lignin (MWL p ) and lignin-carbohydrate complex (LCC) were isolated from bamboo ( Phyllostachys pubescens ) fibers (BF) and parenchyma cells (PC), respectively. The variations of structure features and chemical linkages of lignin and LCC were investigated via FT-IR, 2D HSQC NMR, and 31 P NMR techniques. 2D HSQC NMR revealed that β -O-4 alkyl-aryl ether linkages and resinol ( β - β ) substructure were the main substructures in BF-MWL p and PC-MWL p . β -1 linkages existed in the PC-MWL p (3.18/100 Ar), but not in BF-MWL p . Moreover, tricin, as a flavonoid compound, was only detected in the BF-MWL p . The amount of the syringyl (S) units of PC-MWL p was higher than BF-MWL p . The results indicated that phenyl glycoside (PhGlc) bonds (mainly lignin and xylan) were the predominant chemical linkage type of LCC bonds in BF-LCC and PC-LCC, and the high contents of PhGlc bonds (45.53/100 Ar) were presented in PC. Our finding can provide a reference for the structural variations of lignin and LCC between the different bamboo cell walls.

polymer science,biochemistry & molecular biology,chemistry, applied
Unveiling the Structural Characteristics of Lignin and Lignin-Carbohydrate Complexes in Fibers and Parenchyma Cells of Moso Bamboo during Different Growing Years

Chen Zhang,Jing Liu,Yanrong He,Jialong Wen,Tong-Qi Yuan

DOI: https://doi.org/10.1021/acs.jafc.4c04010

2024-09-04

Abstract:Understanding and recognizing the structural characteristics of lignin-carbohydrate complexes (LCCs) and lignin in different growth stages and tissue types of bamboo will facilitate industrial processes and practical applications of bamboo biomass. Herein, the LCC and lignin samples were sequentially isolated from fibers and parenchyma cells of bamboo with different growth ages. The diverse yields of sequential fractions not only reflect the different biomass recalcitrance between bamboo fibers and parenchyma cells but also uncover the structural heterogeneity of these tissues at different growth stages. The molecular structures and structural inhomogeneities of the isolated lignin and LCC samples were comprehensively investigated. The results showed that the structural features of lignin and LCC linkages in parenchyma cells were abundant in β-O-4 linkages but less with carbon-carbon linkages, suggesting that lignin and cross-linked LCC in parenchyma cells are simple in nature and easily to be tamed and tractable in the current biorefinery. Parallelly, the different ball-milled samples were directly characterized by high-resolution (800 M) solution-state 2D-HSQC NMR to analyze the whole lignocellulosic material. Overall, the scheme presented in this study will provide a comprehensive understanding of lignin and LCC linkages in fibers and parenchyma cells of bamboo and enable the utilization of bamboo biomass.
Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Shaoping Qian,Huanhuan Zhang,Kuichuan Sheng

DOI: https://doi.org/10.15376/biores.12.1.419-433

2017-01-01

BioResources

Abstract:To take full advantage of moso bamboo processing waste, bamboo cellulose nanowhiskers were isolated from bamboo residues using sulfuric acid hydrolysis. Changes in bamboo cellulose at different stages of processing, as well as the roles of acid concentrations (55 wt% and 65 wt%) and hydrolysis times (1 h to 5 h) on the characteristics of nanowhiskers were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetry-Fourier transform infrared spectroscopy analysis (TGA-FTIR), synchrotron radiation wide angle X-ray scattering (WAXS), composition analysis, and Brunauer-Emmett Teller (BET) analysis. Both rod-like and network-like nanowhiskers were observed. Alkaline pretreatment removed impurities and part of the hemicellulose. Cellulose content increased to nearly 85%, and specific surface area improved as well after bleaching. Nanowhiskers had an average length of 455 nm, diameter of 12 nm, and an aspect ratio of about 37. Cellulose I was the dominant composition in bamboo cellulose; the transformation of cellulose Iα to cellulose Iβ was observed. Nanowhiskers presented greater crystallinity and crystallite size than those of cellulose without hydrolysis, but lower thermal stability. These bionanowhiskers might be used as reinforcements in nanocomposites.
Structural characterization of willow bark lignin.

Dharshana Padmakshan

DOI: https://doi.org/10.1021/acs.jafc.8b02014

IF: 6.1

2018-01-01

Journal of Agricultural and Food Chemistry

Abstract:Understanding the chemical structure of lignin in willow bark is an indispensable step to design how to separate its fiber bundles. The whole cell wall and enzyme lignin preparations sequentially isolated from ball-milled bark, inner bark, and wood were comparatively investigated by nuclear magnetic resonance (NMR) spectroscopy and three classical degradative methods, i.e., alkaline nitrobenzene oxidation, derivatization followed by reductive cleavage, and analytical thioacidolysis. All results demonstrated that the guaiacyl (G) units were predominant in the willow bark lignin over syringyl (S) and minor phydroxyphenyl (H) units. Moreover, the monomer yields and S/G ratio rose progressively from bark to inner bark and wood, indicating that lignin may be more condensed in bark than in other tissues. Additionally, major interunit linkage substructures (beta-aryl ethers, phenylcoumarans, and resinols) together with cinnamyl alcohol end groups were relatively quantitated by twodimensional NMR spectroscopy. Bark and inner bark were rich in pectins and proteins, which were present in large quantities and also in the enzyme lignin preparations.
Structural Characteristics and Antioxidant Activities of Acetic Acid Lignin from Bamboo Shell

Wei-hua GONG,Qiang HU,Zhuo-ya XIANG,Guo-hua ZHAO,Ying PENG

DOI: https://doi.org/10.13550/j.jxhg.2017.12.016

2017-01-01

Abstract:Lignin was extracted from bamboo( Dendrocalamus latiforus Munro) shoot shell by acetosolv process. The surface microscopic characteristic, crystalline characteristic, thermostability, moisture-absorbing characteristic and antioxidant activities of acetic acid lignin ( AL ) were investigated and compared with that of the same source of cellulose residue and coarse dietary fiber. The results showed that the surface of AL was spherical,coarse and porous. The amorphous acetic acid lignin had better thermal stability and the maximum weight loss rate was 0. 34％/℃ with a low moisture absorption (5. 21％) . In terms of the DPPH radical scavenging activity and ferric reducing antioxidant power ( FRAP) ,AL showed stronger antioxidant activity than the commercial synthetic antioxidant BHT. But there was no significant difference in the ABTS free radical scavenging capacity between AL and BHT. The antioxidant capacity of AL was significantly higher than that of the same source of cellulose residue coarse dietary fiber.
Lignin Reactions and Structural Alternations under Typical Biomass Pretreatment Methods

Linjiang Zhu,Anjie Xu,Hui Zhang,Yuele Lu,Shijie Liu,Xiaolong Chen,Hanchi Chen

DOI: https://doi.org/10.2174/1385272823666190806100747

2019-01-01

Current Organic Chemistry

Abstract:The utilization of biomass in the production of renewable bioenergy and biomaterials has been a popular topic since the past decades as they are rich in carbohydrates. Most biomasses, such as wood, monocotyledons, and agriculture residues, need to be pretreated before the conversion of carbohydrates in order to break down the recalcitrant cell wall structure and increase the fiber accessibility. To date, a variety of pretreatment methods have been developed that vary from physical to chemical and biological methods. Pretreatment processes affect the cell wall physical structure as well as the chemical structure of the cell wall constituents. Comparing to the studies of the cellulose and hemicelluloses structural changes during pretreatment, such studies on lignin are relatively limited. On the other hand, in order to utilize the part of lignin from biorefinery processes, the understanding of the lignin structural changes during the refining process becomes important. In this study, typical pretreatment methods such as hydrothermal pretreatment, alkaline pretreatment, biodegradation, and oxidative pretreatment are introduced and their corresponding impacts on the lignin structures are reviewed.
Composition and Structure of an Antioxidant Acetic Acid Lignin Isolated from Shoot Shell of Bamboo (dendrocalamus Latiforus)

Weihua Gong,Zhuoya Xiang,Fayin Ye,Guohua Zhao

DOI: https://doi.org/10.1016/j.indcrop.2016.07.023

IF: 6.449

2016-01-01

Industrial Crops and Products

Abstract:Bamboo shoot shell (BSS), which contains a large amount of insoluble fibre and lignin, is the main agricultural waste from the production of bamboo shoots. To utilize this waste in a value-added manner, the acetic acid lignin (AL) fraction from BSS was extracted via a combination of hot water pre-treatment and acetic acid post-treatment in the present study. The chemical composition, structural characteristics, and antioxidant activity of AL were investigated and compared to the corresponding milled wood lignin (MWL). The results showed that AL had a higher yield (74%) and lower content of associated carbohydrates (2.96%) than MWL (5.16%). GPC analysis revealed that AL possessed a moderate molecular weight (Mw=2789Da) and narrow polydispersity index (Mw/Mn=1.54). Structural characterization via FT-IR, 1H NMR, 2D-HSQC, and 31P NMR indicated that AL from BSS was a typical HSG-type lignin and was partially acylated at the γ-carbon of the side chain by p-coumarate. Moreover, the bonds between lignin units were predominately β-O-4⿲ linkages. Compared to MWL, AL possessed a characteristically higher phenolic hydroxyl group content and S/G ratio. In terms of the DPPH radical scavenging activity, ABTS radical cation scavenging activity and ferric reducing antioxidant power, AL showed stronger antioxidant activity than MWL and was superior to the commercial synthetic antioxidant BHT. In summary, by applying a modified two-step procedure, which included hot water pre-treatment and acetic acid extraction, AL from BSS was effectively extracted, and the antioxidant potential of AL was characterized.
Physicochemical Properties of Lignin from Bamboo (Dendrocalamus latiforus) Shoot Shell

Weihua GONG,Zhuoya XIANG,Fayin YE,Guohua ZHAO

DOI: https://doi.org/10.7506/spkx1002-6630-201709010

2017-01-01

Abstract:Lignin was extracted from bamboo (Dendrocalamus latiforus) shoot shell by the acetosolv process.The chemical composition,particle size,specific surface area,porosity structure,water-and oil-holding capacity,swelling power,and cation-exchange,metal ion and cholate binding capacity of the lignin were investigated.Compared with cellulose and coarse dietary fiber from the same source,the lignin had smaller particle size and significantly greater oil-holding,cation-exchange and metal ion capacity.The water-holding and swelling capacities of the samples were positively correlated with their particle size.In vitro cholate-binding studies showed that the lignin bound more significantly sodium cholate and sodium taurocholate than the other fractions,and the binding rates were 82.46％ and 60.94％ relative to cholestyamin (a cholesterol-lowing,bile acid-binding drug),respectively.These results indicated that lignin from bamboo shoot shell had application potential for human health.
Structure-property Relationships for Technical Lignins for the Production of Lignin-Phenol-formaldehyde Resins

Bo Pang,Sheng Yang,Wei Fang,Tong-Qi Yuan,Dimitris S. Argyropoulos,Run-Cang Sun

DOI: https://doi.org/10.1016/j.indcrop.2017.07.009

IF: 6.449

2017-01-01

Industrial Crops and Products

Abstract:The synthesis and performance of a lignin-phenol-formaldehyde resin are significantly related to the properties of the lignin used. In an effort to provide a fundamental understanding of lignin structure-property relations for lignin-phenol-formaldehyde resin synthesis and application, two distinct technical lignins were examined as-obtained from an acidic (L1) and an alkaline (L2) organosolv pulping of bamboo. These samples were thoroughly characterized and the structural and compositional features of them were charted. The content of β-O-4′ linkages in L1 were 23.83 per 100Ar, followed by some β-β′ linkages (1.27 per 100Ar). However, almost all the side-chain linkages in L2 were cleaved. The purities of the two lignins both exceeded 81.0%, but significantly more extractives were found to be present in L2. Subsequently, two lignin-phenol-formaldehyde resins were successfully synthesized using L1 and purified L2 at a substitution rate of 50% to phenol. The high content of extractives contaminating L2, especially long-chain hydrocarbon derivatives, severely affected the synthesis of lignin-phenol-formaldehyde resin. The successful removal of this fraction was necessary before the material could be put to use.
The spatial orientation and interaction of cell wall polymers in bamboo revealed with a combination of imaging polarized FTIR and directional chemical removal

Jiawei Zhu,Wenting Ren,Fei Guo,Hankun Wang,Yan Yu

DOI: https://doi.org/10.1007/s10570-022-04506-9

IF: 6.123

2022-03-08

Cellulose

Abstract:The mechanical and physical properties of lignocellulosic materials are closely related to the orientation and interaction of the polymers within cell walls. In this work, Imaging Polarized FTIR, combined with directional chemical removal, was applied to characterize the spatial orientation and interaction of cell wall polymers in bamboo fibers and parenchyma cells from two bamboo species. The results demonstrate the cellulose in bamboo fibers is nearly axially oriented whereas it is almost transversely arranged in parenchyma cells. Xylan and lignin are both preferentially oriented alongside cellulose, but with less orientation degree in the parenchyma cells. After lignin removal, the average orientation of xylan and cellulose is little affected, suggesting a strong interaction between cellulose and xylan. However, the alkaline treatment significantly weakens the orientation of lignin in both fibers and parenchyma cells, and more significant for the latter, indicating the easy-degradable nature of lignin in parenchyma cells. Additionally, it seemed the lignin and xylan in fibers were more difficult to remove as compared to parenchyma cells, supporting the assumption that stronger interaction exists between lignin and xylan in the fibers. In a word, it is believed parenchyma cells are more suitable for biorefinery owing to their less ordered and relatively loose molecular assembly, as compared to fibers.

materials science, textiles,polymer science, paper & wood
An "ideal Lignin" Facilitates Full Biomass Utilization.

Yanding Li,Li Shuai,Hoon Kim,Ali Hussain Motagamwala,Justin K. Mobley,Fengxia Yue,Yuki Tobimatsu,Daphna Havkin-Frenkel,Fang Chen,Richard A. Dixon,Jeremy S. Luterbacher,James A. Dumesic,John Ralph

DOI: https://doi.org/10.1126/sciadv.aau2968

IF: 13.6

2018-01-01

Science Advances

Abstract:Lignin, a major component of lignocellulosic biomass, is crucial to plant growth and development but is a major impediment to efficient biomass utilization in various processes. Valorizing lignin is increasingly realized as being essential. However, rapid condensation of lignin during acidic extraction leads to the formation of recalcitrant condensed units that, along with similar units and structural heterogeneity in native lignin, drastically limits product yield and selectivity. Catechyl lignin (C-lignin), which is essentially a benzodioxane homopolymer without condensed units, might represent an ideal lignin for valorization, as it circumvents these issues. We discovered that C-lignin is highly acid-resistant. Hydrogenolysis of C-lignin resulted in the cleavage of all benzodioxane structures to produce catechyl-type monomers in near-quantitative yield with a selectivity of 90% to a single monomer.
A comparative study on the crystalline structure of cellulose isolated from bamboo fibers and parenchyma cells

Wenting Ren,Fei Guo,Jiawei Zhu,Mengdan Cao,Hankun Wang,Yan Yu

DOI: https://doi.org/10.1007/s10570-021-03892-w

IF: 6.123

2021-05-22

Cellulose

Abstract:Bamboo, with a high cellulose content comparable to that of wood, is a potential feedstock for biofuel and nanocellulose production. Mechanically isolated bamboo fibers and parenchyma cells exhibited remarkable differences in enzymatic hydrolysis efficiency as reported in a recent comparative study. It was assumed that cellulose microfibrils in bamboo fibers and parenchyma cells differ in their supramolecular structures. In the present study, X-ray diffraction and solid-state CP/MAS<sup>13</sup>C NMR studies indicated that, the two types of cells showed similar cellulose crystallinity index. The cellulose from bamboo fibers and parenchyma cells also exhibited differences in microfibril sizes, with lateral sizes of ca. 26.0–41.3 Å and ca. 22.7–39.3 Å for bamboo fibers and parenchyma cells respectively. It was further found that cellulose chains in bamboo fibers were more closely packed, supported by its smaller d-spacing than that of parenchyma cell cellulose. In addition, FT-IR and NMR spectroscopy revealed that there was a higher Iβ content in fibers than parenchyma cells. These differences in the crystalline structure of cellulose should be related to the lower recalcitrance to chemical degradation of parenchyma cells compared to bamboo fibers.

materials science, textiles,polymer science, paper & wood
Uncovering the Structure of Lignin from Moso Bamboo with Different Tissues and Growing Ages for Efficient Ambient-Pressure Lignin Depolymerization

Chen Zhang,Xiaojun Shen,Mengying Liu,Jialong Wen,Tong-Qi Yuan

DOI: https://doi.org/10.1021/acssuschemeng.3c04206

IF: 8.4

2023-09-01

ACS Sustainable Chemistry & Engineering

Abstract:Lignin is a complex and heterogeneous biomacromolecule, exhibiting significant variations in its structure based on plant species, growth stages, and tissue types. Uncovering the structure of lignin is crucial for guiding the chemical processing of bamboo and developing an efficient production of monophenols. Herein, the double enzymatic lignin (DEL) was isolated from bamboo with different tissues (parenchyma cells and fiber) and growing ages (1, 5, and 8 years), and the structural heterogeneity of this DEL was characterized. A hydrogen-free green ambient-pressure reductive catalytic depolymerization (ARCD) reaction of DEL aids in understanding the relationships between the molecular composition and the depolymerization performance of the lignin. The results revealed that the predominant interunit linkage of lignin in bamboo is β–O–4 linkages, particularly in parenchyma, with distinct distributions of typical lignin units such as tricin, ferulate (FA), and p-coumarate (pCA) between parenchyma and fibers. The macromolecular structure of lignin had a significant influence on the yield and selectivity for the production of monophenols, with higher yields observed for parenchyma cells. These findings highlight the potential of lignin depolymerization in 5-year-old moso bamboo parenchymal cells, rich in β–O–4 linkages, as a promising feedstock in lignin-first biorefineries. This work provides a valuable example of the selection of high-aryl-ether lignin feedstock for efficient lignin depolymerization and mass production of phenolic compounds.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Revealing spatial distribution and accessibility of cell wall polymers in bamboo through chemical imaging and mild chemical treatments

Jiawei Zhu,Wenting Ren,Fei Guo,Hankun Wang,Yan Yu

DOI: https://doi.org/10.1016/j.carbpol.2024.122261

2024-09-01

Abstract:Understanding the distribution and accessibility of polymers within plant cell walls is crucial for addressing biomass recalcitrance in lignocellulosic materials. In this work, Imaging Fourier Transform Infrared (FTIR) and Raman spectroscopy, coupled with targeted chemical treatments, were employed to investigate cell wall polymer distribution in two bamboo species at both tissue and cell wall levels. Tissue-level Imaging FTIR revealed significant disparities in the distribution and chemical activity of cell wall polymers between the fibrous sheath and fibrous strand. At the cell wall level, Imaging Raman spectroscopy delineated a distinct difference between the secondary wall and intercellular layer, with the latter containing higher levels of lignin, hydroxycinnamic acid (HCA), and xylan, and lower cellulose. Mild acidified sodium chlorite treatment led to partial removal of lignin, HCA, and xylan from the intercellular layer, albeit to a lesser extent than alkaline treatment, indicating susceptibility of these polymers to chemical treatment. In contrast, lignin in the secondary wall exhibited limited reactivity to acidified sodium chlorite but was slightly removed by alkaline treatment, suggesting stable chemical properties with slight alkaline intolerance. These findings provide valuable insights into the inherent design mechanism of plant cells and their efficient utilization.
Discretely sampled variance and volatility swaps versus their continuous approximations

R. Jarrow,Younes Kchia,Martin Larsson,P. Protter

DOI: https://doi.org/10.1007/s00780-012-0183-2

IF: 2.0952

2011-03-07

Finance and Stochastics

Abstract:
Differential Studies on the Structure of Lignin–Carbohydrate Complexes (LCC) in Alkali-Extracted Plant Hemicelluloses

Shuyu Pang,Xin Wang,Jiali Pu,Chen Liang,Shuangquan Yao,Chengrong Qin

DOI: https://doi.org/10.3390/polym16101403

IF: 5

2024-05-16

Polymers

Abstract:Hemicellulose extracted by alkali treatment is of interest because of the advantages of its intact sugar structure and high degree of polymerization. However, the hemicellulose extracted by alkali treatment contained more lignin fragments and the presence of a lignin–carbohydrate complex (LCC), which affected the isolation and purification of hemicellulose and its comprehensive utilization. Therefore, the evaluation of the LCC structure of different types of lignocellulosic resources is of great significance. In this study, the LCC structures of hardwoods and Gramineae were enriched in alkaline systems. Information on the composition, structural proportions, and connection patterns of LCC samples was discussed. The similarities and differences between the LCC structures of different units of raw materials were comparatively studied. The results indicated that the monosaccharide fractions were higher in the LCC of Gramineae compared to hardwoods. The composition of the lignin fraction was dominated by G and S units. The phenyl glycosidic (PhGlc) bond is the predominant LCC linkage under alkali-stabilized conditions. In addition, Gramineae PhGlc types are more numerous compared to hardwoods. The results of the study provide insights into the differences in the chemical composition and structural features of LCC in different plants and provide important guidance for the optimization of the process of purifying hemicellulose.

polymer science
Structural and Chemical Analysis of Three Regions of Bamboo (Phyllostachys Edulis)

Shaohua Gu,Ana Lourenço,Xin Wei,Jorge Gominho,Ge Wang,Haitao Cheng

DOI: https://doi.org/10.3390/ma17205027

IF: 3.4

2024-10-15

Materials

Abstract:This study focuses on three different regions of moso bamboo (Phyllostachys edulis): an inner layer (IB), middle layer (MB), and outer layer (OB), to comprehensively characterize the structural features, chemical composition (ash, extractives and lignin contents), and the lignin monomeric composition as determined by analytical pyrolysis. The results show that bamboo presents a gradient structure. From the IB to OB, the vascular bundle density and fiber sheath ratio increase, the porosity decreases (from 45.92% to 18.14%), and the vascular bundle diameter–chord ratio increases (from 0.85 to 1.48). In terms of chemical composition, the ash, extractives, and acid-soluble lignin content gradually decrease from IB to OB. The holocellulose content follows the trend: MB (66.3%) > OB (65.9%) > IB (62.8%), while the acid-insoluble lignin content exhibits the opposite trend: IB (22.6%) > OB (17.8%) > MB (17.7%). Pyrolysis products reveal the diversity of carbohydrates and lignin derivatives, with a lignin monomeric composition rich in syringyl and guaiacyl units and lower amounts of H-units: the IB has an H:G:S relation of 18:26:55, while 15:27:58 is the ratio for the MB and 15:40:45 for the OB; S/G ratio values were, respectively, 1.22, 1.46, and 0.99. A comprehensive analysis highlights significant gradient variations in the structure and chemistry of bamboo, providing robust support for the classification and refinement methods of bamboo residues for potential applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Unveiling the Structural Properties of Lignin–Carbohydrate Complexes in Bamboo Residues and Its Functionality As Antioxidants and Immunostimulants

Caoxing Huang,Shuo Tang,Weiyu Zhang,Yuheng Tao,Chenhuan Lai,Xi Li,Qiang Yong

DOI: https://doi.org/10.1021/acssuschemeng.8b03262

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Lignin-carbohydrate complexes (LCCs), a significant component of plant cell walls, have been found to bear biological functionality as antioxidants in food and as immunostimulants for living cell. In this work, a lignin-rich and a carbohydrate-rich LCCs preparations were isolated from bamboo residues (bamboo green and bamboo yellow). Each preparation was characterized by chemical composition and LCCs linkage types and quantities by high performance anion exchange chromatography (HPAEC) and NMR technologies (quantitative C-1(3) NMR and 2D-HSQC NMR). Furthermore, evaluation of each LCCs preparation's suitability as antioxidant and immunological substances were explored. Antioxidant assays indicated that all the LCCs preparations exhibited pronounced antioxidant activities for scavenging the 2,2-diphenyl-1-picryl-hydrazyl and hydroxyl radicals, while the lignin-rich LCCs outperformed the carbohydrate-rich LCCs. Immunological analysis showed that carbohydrate-rich LCCs could significantly inhibit the growth of breast tumor cells (MCF-7), while lignin-rich LCCs could stimulate the growth of macrophage cells (RAW 264.7). These results imply that LCCs extracted from bamboo may be used as novel and natural antioxidants or immunostimulants.
[Revealing the Cell Structure and Formation of Bamboo with Confocal Raman Microscopy].

Li Xiao-li,Zhou Bin-xiong,Zhang Yi,Yao Yan-ming,He Yong

DOI: https://doi.org/10.3964/j.issn.1000-0593(2016)02-0413-06

2016-01-01

Abstract:Parenchyma cell (PAC), transition tissue between parenchyma cell and fiber cell (TC) and fibre cell (FC) of bamboo were studied by confocal Raman microscopy in this paper. Partial least squares regression was applied to establish a quantitative differentiation model for the three types of cells. The result showed that the determination coefficients (R-2) of calibration and validation were respectively 0. 810 and 0. 800, and the root mean square error (RMSE) were respectively 0. 323 and 0. 332. What's more, three raman bands of 1 095, 1 319 and 1 636 cm(-1), verified to the characteristic peaks of pectin, hemicellulose and lignin, were found to be the important bands for the differentiation. Subsequently, these three raman bands were used to establish a multiple linear regression (MLR) model, and the determination coefficients (R-2) of calibration and validation of the model were respectively 0. 644 and 0. 643, and the root mean square error (RMSE) were respectively 0. 442 and 0. 443. This result showed that there existed obvious difference among the three types of cells in these three raman bands. Finally, the raman spectral signal processed by wavelet transform to eliminate baseline were used to chemical imaging analysis. These results showed a rather large microfibril angle between cellulose fibrils and fibre axis, which contributed to higher modulus and hardness of cells. Hemicellulose and cellulose have similar distribution in the raman chemical image, due to the connection of hemicellulose and cellulose microfiber through hydrogen bond and the closely combination under the action of van der Waals force. The cell corners (CC) and compound middle lamella (CML) were heavily lignified, and a gradual decrease of lignification from the outer layer to the inner layer of the three cells indicate that lignification was first occurred at the CC and CML, and the lignification was not fully completed.
Structural studies of an enzymatically produced Norway spruce lignin-carbohydrate complex

Petri Oinonen,M. Lawoko,Liming Zhang,G. Henriksson

Abstract:Lignocellulose can become the best opportunity for the society to reduce its dependency on the harmful petroleum based products as well as to produce clean energy. In each part of the production cycle, biomass based products have a better environmental profiles than their petroleum based counterparts. Woody biomass has a vast availability, but it suffers from recalcitrance that is mostly caused by lignin that is functioning as a matrix, surrounding and binding the carbohydrates that are currently the most valuable of the wood components.Lignin-carbohydrate (LC) bonds are believed to be a key element in this recalcitrance and research has shown that these types of bonds are common in wood. These bonds are important in an economical point of view as well, as e.g. residual lignin structures in pulp (lignins bonded to the cellulose and hemicelluloses) require expensive bleaching sequences for their removal.The LC-structures can also be exploited technically as we now have demonstrated. We developed a method that utilizes phenolic end groups that are bonded to different hemicelluloses for cross-linking. The enzyme laccase was used for the cross-linking to create a cost-efficient processing scheme to both isolate and increase the molecular weight of the hemicelluloses. Membrane filtration was used as the key separation technique, which enables the establishment of industrial scale production. The final product had improved mechanical and thermal properties and could be used e.g. as barrier film component in renewable packaging. Nanocomposite formation with nanofibrillated cellulose was also studied. This improved the film properties further. The complexes are also possible to use as model compounds for lignin-carbohydrate complexes in wood.This technique can also be seen to mimick the lignification and lignin-carbohydrate network formation phenomena in plants enabling the formation of entire networks of wood components. Our results suggests that the side chains of hemicellulose might play an important role in network formation and that hemicellulose molecules can carry more than one lignin phenolic end group to fulfill this capability.

Environmental Science,Materials Science,Chemistry

Pig parts for people?

Unveiling lignin structures and lignin-carbohydrate complex (LCC) linkages of bamboo ( Phyllostachys pubescens ) fibers and parenchyma cells

Unveiling the Structural Characteristics of Lignin and Lignin-Carbohydrate Complexes in Fibers and Parenchyma Cells of Moso Bamboo during Different Growing Years

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Structural characterization of willow bark lignin.

Structural Characteristics and Antioxidant Activities of Acetic Acid Lignin from Bamboo Shell

Lignin Reactions and Structural Alternations under Typical Biomass Pretreatment Methods

Composition and Structure of an Antioxidant Acetic Acid Lignin Isolated from Shoot Shell of Bamboo (dendrocalamus Latiforus)

Physicochemical Properties of Lignin from Bamboo (Dendrocalamus latiforus) Shoot Shell

Structure-property Relationships for Technical Lignins for the Production of Lignin-Phenol-formaldehyde Resins

The spatial orientation and interaction of cell wall polymers in bamboo revealed with a combination of imaging polarized FTIR and directional chemical removal

An "ideal Lignin" Facilitates Full Biomass Utilization.

A comparative study on the crystalline structure of cellulose isolated from bamboo fibers and parenchyma cells

Uncovering the Structure of Lignin from Moso Bamboo with Different Tissues and Growing Ages for Efficient Ambient-Pressure Lignin Depolymerization

Revealing spatial distribution and accessibility of cell wall polymers in bamboo through chemical imaging and mild chemical treatments

Discretely sampled variance and volatility swaps versus their continuous approximations

Differential Studies on the Structure of Lignin–Carbohydrate Complexes (LCC) in Alkali-Extracted Plant Hemicelluloses

Structural and Chemical Analysis of Three Regions of Bamboo (Phyllostachys Edulis)

Unveiling the Structural Properties of Lignin–Carbohydrate Complexes in Bamboo Residues and Its Functionality As Antioxidants and Immunostimulants

[Revealing the Cell Structure and Formation of Bamboo with Confocal Raman Microscopy].

Structural studies of an enzymatically produced Norway spruce lignin-carbohydrate complex