Double insertion of isocyanides into dihydropyridines: direct access to substituted benzimidazolium salts.

C. Masdeu,E. Gómez,N. A. Williams,R. Lavilla

DOI: https://doi.org/10.1002/ANIE.200605070

2007-04-20

Angewandte Chemie

Abstract:

What problem does this paper attempt to address?

Programable sewage-cleaning technology: Regenerating chitosan biofilms with anti-bacterial capacity via self-purification of water pollutants

Jianming Wu,Shuai Chen,Qinjie Xu,Qingkai Pang,Peng Li,Yulin Li

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132355

Abstract:In this paper, a novel programable sewage-cleaning technology for the regeneration of antibacterial nanocomposites via the removal of wastewater pollutants is presented. Montmorillonite (MMT) was encapsulated in poly(vinyl alcohol) (PVA)-enhanced chitosan (CTS) hydrogels to form MMT-loaded nanocomposite biofilms (PCM). The PCM nanocomposite biofilms exhibited increased breaking strength and elongation at break, by factors of approximately 1.38 and 1.40, respectively, compared with those of the pure PVA/CTS biofilms. The maximum adsorption capacity of the PCM nanocomposite biofilms toward tetracycline and Ag(I) is 275.0 and 567.0 mg/g, respectively. The adsorbed nanocomposite biofilms exhibited excellent antibacterial properties against Staphylococcus aureus and Escherichia coli. Meanwhile, the nanocomposite also showed an effective adsorption capacity toward other toxic components, where the highest adsorption capacity is 2748.0 mg/g (for methyl blue). The simulation results indicated that the adsorption behaviors of the malachite green, neutral red, methyl blue, tetracycline, Cu(II), Zn(II), and Ag(I) by the PCM nanocomposite biofilms followed pseudo-second-order kinetic and Freundlich isotherm models. Furthermore, the PCM nanocomposite biofilms are stable in PBS solution but degradable in lysozyme-containing PBS solution, suggesting their potential application in the wastewater treatment as well as antibacterial fields.
Synthesis and characterization of well-aligned ZnO:Sb nanowires

D. Nakamura,K. Okazaki,I. Palani,M. Higashihata,T. Okada

DOI: https://doi.org/10.1109/IQEC-CLEO.2011.6193764

2011-08-28

Abstract:Vertically-aligned ZnO nanowires on a sapphire substrate have been synthesized by a nanoparticle-assisted pulsed-laser deposition using a Sb2O3 doped ZnO target. Uniform cone-shape core was formed at the bottom of each vertically-aligned ZnO nanowire. The nanowires consist of single-crystalline wurzite ZnO crystal with a growth direction along [0001]. The room-temperature photo luminescence spectrum exhibited a strong ultraviolet emission at around 380 nm.
Efficient synergistic degradation of tetracycline hydrochloride by protonated g-C3N4 and Chlorella pyrenoidosa: Kinetics and mechanism

Kaipian Shi,Juan Wang,Li Yin,Ying Xu,Desheng Kong,Hongxiang Li,Yong Zhang,Youru Yao,Huan He,Shaogui Yang,Lixiao Ni,Shiyin Li

DOI: https://doi.org/10.1016/j.cej.2023.142331

IF: 15.1

2023-04-01

Chemical Engineering Journal

Abstract:The combined application of microalgae and photocatalytic materials in degrading and detoxifying organic pollutants has shown good application prospects. However, the combined application of the two technologies had problems such as the difficult recovery of photocatalytic materials and poor biocompatibility. Therefore, this study combined the protonated graphitized carbon nitride (P-g-C3N4) with Chlorella pyrenoidosa through electrostatic adsorption to form a new photocatalytic microalgae composite degradation system. At the same time, Chlorella pyrenoidosa enhanced the photocatalytic activity of P-g-C3N4 through EOMs photosensitization and electron transfer, and there was a synergistic effect between P-g-C3N4 and Chlorella pyrenoidosa, which realized the efficient degradation and mineralization of tetracycline hydrochloride. Meanwhile, the new compound degradation system had a good solid–liquid separation effect and recycling efficiency. Electron paramagnetic resonance (EPR) and free radical capture experiments showed that superoxide radical was dominant in the reaction pathway. The research results can provide theoretical and practical support for the application of the combined technology of microalgae and photocatalytic materials.

engineering, chemical, environmental
MXene-like Carbon Sheet/carbon Nanotubes Derived from Metal-Organic Frameworks for Efficient Removal of Tetracycline by Non-Radical Dominated Advanced Oxidation Processes

Ming Zhang,Jingqi Ruan,Lianjie Wang,Zhenqing Zhao,Weizhen Shao,Jiansheng Li,Zhanghao Chen,Cheng Gu,Weichuan Qiao

DOI: https://doi.org/10.1016/j.seppur.2022.121851

IF: 8.6

2022-01-01

Separation and Purification Technology

Abstract:Metal-organic frameworks (MOFs) derived carbon with diversified structure and composition have received tremendous attention in persulfate advanced oxidation processes (AOPs). Here, layer-by-layer MXene-like carbon sheet/carbon nanotubes (MCS/CNTs) were facilely prepared by pyrolysis of homologous MOF precursors. To present the influence of structure and composition on catalytic performance, different pyrolysis temperatures range from 700 to 1000 degrees C were applied to treat MOF precursor, and common antibiotic tetracycline hydro-chloride (TTCH) was selected as the targeted pollutant to degrade. The results indicated that under 900 degrees C generated MCS/CNTs-9 with maximum specific surface area displayed much higher adsorption capacity (35.9%) and faster degradation rate (0.26 min(-1)) than that of the others. The degradation mechanism was confirmed by radical quenching experiments and electron paramagnetic resonance spectra. Degradation pathway was inferred by liquid chromatography-mass spectrograph (LC-MS), and a biotoxicity experiment of degradation products was carried out by culture of Escherichia coli. This work promotes the development of environmental nanomaterials and demonstrates the possibility of AOPs in water remediation.
Acid-modified red mud biochar for the degradation of tetracycline: Synergistic effect of adsorption and nonradical activation

Bohan Xu,Qiang An,Shuman Deng,Zheng Li,Zihao Yang,Haoyu Wu,Zhihong Ye

DOI: https://doi.org/10.1016/j.jenvman.2023.119077

2023-12-01

Abstract:In this study, a novel acid-modified red mud biochar catalyst (MMBC) was synthesized by industrial waste red mud (RM) and peanut shell (PSL) to activate peroxodisulfate (PDS) for the degradation of TC. Meanwhile, MMBC exhibited remarkable adsorption capacity, reaching a 60% removal ratio of TC within 60 min (equilibrium adsorption capacity = 12 mg/g). After adding PDS, MMBC/PDS system achieved a 93.8% removal ratio of TC within 60 min. Quenching experiments and electron paramagnetic resonance (EPR) results showed that 1O2 played a dominant role in the degradation of TC and O2•- was the mainly precursor for the production of 1O2 in the MMBC/PDS system. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis showed that the surface Fe(II), -OH and -COOH provided the active sites for the activation of PDS by MMBC. In addition, acid modification optimised the surface structure of the catalyst and enhanced the conversion of Fe (mainly Fe(III) to Fe(II)), thereby improving the adsorption and catalytic efficiency of MMBC. This study confirmed that modified red mud biochar is an efficient composite with both adsorption and catalysis, providing new ideas for the practical treatment of antibiotic wastewater and the resource utilization of red mud.
Elucidating tetracycline degradation in a coupled system of photocatalysis combined with Bacillus cereus

Linyu Ji,Ke Li,Meng Gao,Lianyong Lu,Qiaochu Liang,Huixia Lan,Weiwei Lu,Wudi Zhang,Yang Zhang

DOI: https://doi.org/10.1016/j.jwpe.2023.104616

IF: 7

2023-12-07

Journal of Water Process Engineering

Abstract:Tetracycline (TC) causes environmental problems, so its effective degradation technology has attracted wide attention. A coupled system combined photocatalysis with Bacillus cereus (CS) was adopted for TC degradation in this study to make up the defects of the separate photocatalytic system (SPS) and the separate microbial system (SMS). The results showed that the CS outperformed the SPS or SMS, with the removal rate of TC and total organic carbon (TOC) reaching 82.1 % and 51.6 %, respectively. Moreover, photoelectrons in the CS were significantly higher compared with the SPS, and the hydrogen peroxide concentration, O 2 − and soluble iron content were slightly higher, but OH content was lower, indicating that photoelectrons played a primary role in TC degradation. The CS had stronger electron transport activity compared with the SMS, indicating that the presence of photocatalyst was conducive to the degradation of TC by Bacillus cereus . The lower cytochrome C content in the CS revealed that photocatalysis caused a certain degree of damage to Bacillus cereus , but it still could hinder the recombination of photoelectrons and holes, which enhanced the degradation efficiency. Finally, the degradation pathway of TC was inferred by intermediate products, and the result indicated TC was effectively degraded under the combined action of photocatalysis and microorganisms. The study provides valuable insights for degradation of antibiotics.

engineering, chemical, environmental,water resources
Promoted photocatalytic degradation of tetracycline hydrochloride by montmorillonite catalyst loaded with Cu/Mn

Lifang Hu,Kun Yang,Xijing Liu,Jichao Zhu,Jie He,Xiaoyang Chen

DOI: https://doi.org/10.1007/s10854-023-10862-4

2023-07-05

Abstract:Semiconductor photocatalysis is a green and environmentally friendly antibiotic wastewater treatment technology without secondary pollution. In this paper, a series of montmorillonite (MMT) samples loaded with Cu, Mn, and Ni were prepared by impregnation method. The structure and spectral response of the as-prepared samples were characterized by powder X-ray diffraction, energy-dispersive spectroscopy, laser Raman spectroscopy, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), electrochemical impedance spectroscopy, and photocurrent response test. The photocatalytic degradation of tetracycline hydrochloride (TCH) was carried out under simulated solar irradiation, and the photocatalytic properties of MMT samples with different loads were investigated. The characterization results show that Cu and Mn have strong interaction with MMT, and composite photocatalyst Cu 10 Mn 10 -MMT has the smallest Nyquist arc and higher photocurrent intensity. Degradation experiments on TCH showed that Cu 10 Mn 10 -MMT had the best photocatalytic degradation, with a degradation rate of 79.78%, three times that of the original MMT. Active substances capture experiments showed that h + and O 2 − were the main active substances for the degradation of TCH by Cu 10 Mn 10 -MMT. After the combination of Cu, Mn, and MMT, the band structure changed, resulting in more h + and O 2 .− involved in the redox reaction, thereby improving the photocatalytic degradation performance of TCH. In this work, a promising photocatalyst is used to efficiently and greenly degrade antibiotic wastewater.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
CS/CoFe2O4 nanocomposite as a high-effective and steady chainmail catalyst for tetracycline degradation with peroxymonosulfate activation: performance and mechanism

Weiwei Yu,Yueqi Li,Minghui Shu,Cong Liu,Yue Liang,Yufeng Mao,JiangLin Tan,Yang Liu,Ting Ai

DOI: https://doi.org/10.1007/s10653-023-01785-4

2024-01-16

Abstract:Tetracycline becomes a crucial measure for managing and treating communicable diseases in both human and animal sectors due to its beneficial antibacterial properties and cost-effectiveness. However, it is important not to trivialize the associated concerns of environmental contamination following the antibiotic's application. In this study, cobalt ferrate (CoFe2O4) nanoparticles were loaded into chitosan (CS), which can avoid the agglomeration problem caused by high surface energy and thus improve the catalytic performance of cobalt ferrate. And it can avoid the problem of secondary contamination caused by the massive leaching of metal ions. The resulting product was used as a catalyst to activate peroxymonosulfate (PMS) for the degradation of tetracycline (TC). To determine the potential effects on TC degradation, various factors such as PMS dosing, catalyst dosing, TC concentration, initial solution pH, temperature, and inorganic anions (Cl-, H2PO4- and HCO3-) were investigated. The CS/CoFe2O4/PMS system exhibited superior performance compared to the CoFe2O4-catalyzed PMS system alone, achieving a 92.75% TC removal within 120 min. The catalyst displayed high stability during the recycling process, with the efficiency observed after five uses remaining at a stable 73.1%, and only minor leaching of dissolved metal ions from the catalyst. This confirms the high stability of the catalyst. The activation mechanism study showed that there are free radical and non-free radical pathways in the reaction system to degrade TC together, and SO4•- and 1O2 are the primary reactive oxygen radicals involved in the reaction, allowing for effective treatment of contaminated water by TC.
Efficient degradation of tetracycline in wastewater by novel biochar-based photocatalytic materials: performance, photocatalytic mechanism and degradation pathways

Zhirui Dou,Chen Li,Xiaohui Ji,Jinlong Lai,Qian Fu,Hui Liu,Songlin Gong,Jiale Wu

DOI: https://doi.org/10.1007/s11164-024-05451-x

IF: 3.134

2024-11-23

Research on Chemical Intermediates

Abstract:The rapid increase in antibiotic contaminants such as Tetracycline (TC) in aquatic environments poses significant threats to human health and ecosystems. This study presents a novel Mn-Al layered double hydroxide (LDH) composite with rice husk biochar (RHBC) as a highly efficient visible light photocatalyst for the degradation of TC in wastewater. The Mn-Al-LDH/RHBC composite was synthesized via a simple co-precipitation method and characterized by UV–vis DRS, PL, TRPL, EIS, and TPR tests, confirming its wide visible spectral absorption, low electron–hole recombination rate, and high charge transfer efficiency. Photocatalytic performance tests showed that Mn-Al-LDH/RHBC achieved a 90.10% TC degradation efficiency within 90 min of irradiation. Mechanistic studies using EPR and DFT analysis identified ·OH and ·O2− as the primary reactive species in TC degradation. Additionally, QSAR analysis demonstrated a reduction in the biotoxicity of TC and its intermediates post-degradation. This work offers a new insight for the utilization of biomass waste and the improvement of Mn-Al-LDH/RHBC photocatalytic performance, and extends the broad potential application of biochar-based photocatalyst in antibiotic-contaminated wastewater treatment applications.

chemistry, multidisciplinary
Biodegradation mechanism of chlortetracycline by a novel fungal Aspergillus sp. LS-1

Wenshan He,Run Jiang,Siqi Li,Minglu Zhang,Tingting Zhang,Xiaobiao Zhu,Xiaohui Wang

DOI: https://doi.org/10.1016/j.chemosphere.2023.139792

IF: 8.8

2023-08-16

Chemosphere

Abstract:Chlortetracycline (CTC), a widely used typical tetracycline antibiotic, has raised increasing concerns due to its potential health and environmental risks. Biodegradation is considered an effective method to reduce CTC in environment. In this study, a strain Aspergillus sp. LS-1, which can efficiently degrade CTC, was isolated from CTC-rich activated sludge. Under optimal conditions, the maximum removal efficiency of CTC could reach 95.41%. Temperature was the most significant factor affecting the degradation efficiency of LS-1. The 19 products were identified in the CTC degradation by strain LS-1, and three degradation pathways were proposed. All the degradation pathways for CTC exhibited ring-cleaving, which may accelerate the mineralization of CTC. To gain more comprehensive insights into this strain, we obtained the genome of LS-1, which had high GC content (50.1%) and completeness (99.3%). The gene annotation revealed that LS-1 contains some vital enzymes and resistance genes that may carry functional genes involved in the CTC degradation. In addition, other antibiotic resistance genes were found in the genome of LS-1, indicating that LS-1 has the potential to degrade other antibiotics. This study provides a more theoretical basis for the investigation of CTC degradation by fungi and new insights into the biodegradation of CTC.

environmental sciences
Degradation of chlortetracycline hydrochloride by peroxymonosulfate activation on natural manganese sand through response surface methodology

Bo He,Ying Yang,Bingrui Liu,Zixuan Zhao,Jiangwei Shang,Xiuwen Cheng

DOI: https://doi.org/10.1007/s11356-022-21556-5

IF: 5.8

2022-06-25

Environmental Science and Pollution Research

Abstract:AbstractThis work studies the degradation of chlortetracycline hydrochloride (CTC) by activated peroxymonosulfate (PMS) with natural manganese sand (NMS). Meanwhile, the NMS was characterized and analyzed by isothermal nitrogen adsorption (BET), energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscope (SEM). It can be induced that NMS material may contain C, O, Al, Si, Fe, Mn, and K, and the proportion of each is 6%, 9%, 13%, 34%, 27%, 5%, and 6%. Critical parameters, including initial pH value, catalyst dosage, and PMS amount, were optimized through response surface methodology. One of the essential significances of response surface methodology (RSM) is the establishment and optimization of the mathematical model to reduce the complexity of the experimental process. It can provide the degree of mutual influence between various factors and optimize the response based on the investigated factors. Results indicated that 81.65% of CTC could be degraded under the optimized conditions of PMS amount 2.02 g/L, the NMS dosage 0.29 g/L and pH 3.87. Also, it shows that NMS is the most powerful of each factor on the degradation efficiency. We proposed the degradation pathways of CTC from the liquid chromatograph–mass spectrometer (LC–MS) results. Therefore, NMS could be applied as an efficient activator of peroxymonosulfate to purify the water and wastewater.

environmental sciences
Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Yiqiong Yang,Wenqing Ji,Xingyu Li,Huidong Lin,Hongjia Chen,Fukun Bi,Zenghui Zheng,Jingcheng Xu,Xiaodong Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2021.127640

IF: 13.6

2022-02-01

Journal of Hazardous Materials

Abstract:Tetracycline (TC) is a commonly used antibiotic that has gained wide spread notoriety owing to its high environmental risks. In this study, rich carbonyl-modified carbon-coated Fe0 was obtained by pyrolysis of MIL-100(Fe) in an Ar atmosphere, and used to activate peroxymonosulfate (PMS) for the degradation of tetracycline in water. The roles of Fe0, carbon and surface carbonyl on PMS activation were investigated. Fe0 continuously activated PMS, acted as a sustained-release source of Fe2+, and could effectively activate PMS to produce SO4•-, O2•- and •OH. Carbon was found to do responsible for electron transportation during the activation of PMS and slow down the oxidation of Fe0. The carbonyl group on the carbon surface layer was the active site of 1O2, which explains the enhanced performance for TC degradation. When Ca = 0.1 g/L and C0 = 0.4 mM, TC degradation rate reached 96%, which was attributed to the synergistic effect of radicals (i.e., SO4•-, O2•-, •OH) and non-radical (i.e., 1O2). Finally, the degradation pathway was proposed by combining density functional theory (DFT) calculations with liquid chromatography-mass spectrometry (LC-MS), toxicities of the intermediate products were also evaluated. All results show that carbonyl-modified carbon-coated Fe0 possesses promising capacity for the removal of antibiotics from water.

environmental sciences,engineering, environmental
Degradation of Tetracycline Hydrochloride by a Novel CDs/g-C3N4/BiPO4 under Visible-Light Irradiation: Reactivity and Mechanism

Wei Qian,Wangtong Hu,Zhifei Jiang,Yongyi Wu,Zihuan Li,Zenghui Diao,Mingyu Li

DOI: https://doi.org/10.3390/catal12070774

IF: 3.9

2022-07-13

Catalysts

Abstract:In recent years, with the large-scale use of antibiotics, the pollution of antibiotics in the environment has become increasingly serious and has attracted widespread attention. In this study, a novel CDs/g-C3N4/BiPO4 (CDBPC) composite was successfully synthesized by a hydrothermal method for the removal of the antibiotic tetracycline hydrochloride (TC) in water. The experimental results showed that the synthesized photocatalyst was crystalline rods and cotton balls, accompanied by overlapping layered nanosheet structures, and the specific surface area was as high as 518.50 m2/g. This photocatalyst contains g-C3N4 and bismuth phosphate (BiPO4) phases, as well as abundant surface functional groups such as C=N, C-O, and P-O. When the optimal conditions were pH 4, CDBPC dosage of 1 g/L, and TC concentration of 10 mg/L, the degradation rate of TC reached 75.50%. Active species capture experiments showed that the main active species in this photocatalytic system were holes (h+), hydroxyl radicals, and superoxide anion radicals. The reaction mechanism for the removal of TC by CDBPC was also proposed. The removal of TC was mainly achieved by the synergy between the adsorption of CDBPC and the oxidation of both holes and hydroxyl radicals. In this system, TC was adsorbed on the surface of CDBPC, and then the adsorbed TC was degraded into small molecular products by an attack with holes and hydroxyl radicals and finally mineralized into carbon dioxide and water. This study indicated that this novel photocatalyst CDBPC has a huge potential for antibiotic removal, which provides a new strategy for antibiotic treatment of wastewater.

chemistry, physical
MOF/bacterial Cellulose Derived Octahedral MnO/carbon Nanofiber Network: A Hybrid for Peroxymonosulfate Activation Toward Degradation of Tetracycline

Rong Su,Zeyi Wang,Maojie Zhao,Feng Xiao,Luyao Zhang,Lu Yang,Zongjian Wu,Jinwei Bai,Ping He

DOI: https://doi.org/10.1016/j.jallcom.2023.171896

IF: 6.2

2023-01-01

Journal of Alloys and Compounds

Abstract:Metal-organic frameworks (MOFs) derived materials have distinctive structures and conspicuous catalytic performance, making them extensively employed as catalysts in several fields. Herein, MnO/carbon nanofiber has been successfully generated by pyrolyzing Mn-MOF/bacterial cellulose (BC) composite, in which BC serves as a structural support for the growth of Mn-MOF. The characterizations of field-emission scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy demonstrate the effective synthesis of MOFs-derived MnO that maintains its original octahedral structure. MnO/carbon nanofiber is applied as a catalyst to activate peroxymonosulfate (PMS) for the degradation of tetracycline (TC), exhibiting remarkable catalytic activity with 90.59% TC decomposition generated after 30 min. Meanwhile, the removal efficiency for TC remains 83.38% after five cycles. Besides, the quenching experiments confirm not only synergistic effect of radical and non-radical species, but also the vital role of singlet oxygen (1O2) in MnO/CBC-PMS system. This work constructs a new pathway in the preparation of high-performance MOFs-derived metal oxides/carbon materials, which have the potential to enhance the activity in activating peroxymonosulfate for effluent disposal.
The surface asymmetric site regulation of carbon nitride oxide enabling peroxymonosulfate activation for degrading tetracycline

Yunxiong Zeng,Zhilong Zhang,Xingyu Zhan,Jingcai Xu,Shenyun Liu,Fan Wu,Jing Li,Bo Hong,Xinqing Wang,Yingchun Xia

DOI: https://doi.org/10.1016/j.seppur.2024.127211

IF: 8.6

2024-03-29

Separation and Purification Technology

Abstract:Peroxymonosulfate (PMS) activation by the carbonaceous-based materials for degrading antibiotics is a recent emerging hotspot in water environment restoration. Herein, a triazine carbon material is prepared by urea thermal condensation follwed by water-mediated oxidation. The optimized triazine carbon material (CNOR 15 ) can degrade around 100 % of tetracycline within 6 mins, thus pseudo-first-order kinetic constant (k obs ) enhances approximately 49 folds compared to pristine carbon material. Experiments and characterizations demonstrate non-radical reactive species of 1 O 2 plays a crucial role in CNOR 15 /PMS system to eliminate tetracycline, in which performs at an asymmetric C = O site on the edge of triazine motief. Electron paramagnetic resonance and trapping tests comfirm the novel mechanism of electron conduction from sp/sp 2 -hybrdized triazine to C = O prompting PMS decomposition for 1 O 2 generation. Ex-situ argon sputtering XPS technology solidly unveils a underlysing linear corelation between catalysis activity and content of carbonyl-constructed assymetric sites. In addition, membranoid CNOR 15 /PVDF removes ca. 90 % tetracycline at a rate of 100 mL·min −1 in a continuous flow-cell device, exhibiting a promising application in the practical wastewater purification. Our work emphasized a significance of asymmetric site regulation of carbonaceous materials towards PMS activation for environmental remediation.

engineering, chemical
Microbial weathering of montmorillonite and its implication for Cd(II) immobilization

Xun Liu,Minwang Laipan,Chao Zhang,Min Zhang,Ziyu Wang,Mengyao Yuan,Junkang Guo

DOI: https://doi.org/10.1016/j.chemosphere.2023.140850

IF: 8.8

2023-12-03

Chemosphere

Abstract:Interactions between silicate bacteria and silicates are very common in nature and hold great potential in altering their mutual physicochemical properties. But their interactions in regulating contaminants remediation involving performance and mechanisms are often overlooked. Here, we focused on the interactions between silicate bacteria ( Paenibacillus polymyxa , PP; Bacillus circulans , BC) and a soil silicate montmorillonite (Mt), and their impact on Cd(II) immobilization. The obtained results showed that Mt greatly promoted the growth of the bacteria, resulting in a maximum 10.31 times increase in biomass production. In return, the bacteria strongly enhanced the Cd(II) adsorption on Mt, with adsorption capacities increased by 80.61%–104.45% in comparison to the raw Mt. Additionally, the bacteria-Mt interaction changed Cd(II) to a more stabilized state with a maximum reduction of 38.90%/g Mt in bioavailability. The enhancement of Cd(II) adsorption and immobilization on the bacterial modified Mt was caused by the following aspects: (1) the bacteria activities altered the aggregation state of Mt and made it better dispersed, thus more active sites were exposed; (2) the microbial activities brought about more rough and crumpled surface, as well as smaller Mt fragments; (3) a variety of microbial-derived functional groups were introduced onto the Mt surface, increasing its affinity for heavy metals; (4) the main Cd(II) immobilization mechanism was changed from ion exchange to the combination of ion exchange and functional groups induced adsorption. This work elucidates the potential ecological and evolutionary processes of silicate bacteria-soil clay mineral interactions, and bears direct implications for the clay-mediated bioremediation of heavy metals in natural environments.

environmental sciences
Efficient degradation of tetracycline by activated peroxymonosulfate with high permeate flux FeTiO x reactive ceramic membrane: Membrane preparation, real wastewater application, and mechanism insight

Peng Chen,Zhiliang Cheng,Liping Zhang,Shengmei Tan,Jinyu Sun,Jialu Wang,Feifei Duan,Anke Du,Siqi Li

DOI: https://doi.org/10.1016/j.jwpe.2024.105328

IF: 7

2024-05-03

Journal of Water Process Engineering

Abstract:Antibiotic residue in wastewater is one of the most worrying environmental pollution problems. In this study, innovative bimetallic nanocatalysts of FeTiO x were prepared. Benefiting from the synergistic effect between Ti and Fe, FeTiO x exhibited an excellent performance in activating peroxymonosulfate (PMS) for tetracycline (TC) degradation. Within 60 min, the TC treatment efficiency can reach 96 %. Mechanism study confirmed that the non-free radical pathway ( 1 O 2 ) and free radical pathway (O 2 − , OH, SO 4 − ) co-participated during the TC treatment process. To further improve the separation function and efficiency, FeTiO x nanocatalyst was loaded on the ceramic membrane (CM) by a facile spraying method and a self-designed experimental device was constructed, which can be used to degrade TC with large volume. In the designed device, 2 L 40 mg/L TC wastewater can be degraded at one time with an efficiency of 85 % and a permeate flux of 1011.66 kg/m 2 ·h when the transmembrane pressure (TMP) was 20 kPa. Finally, real pharmaceutical wastewater was treated and found that the removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH 3 − N) and total organic carbon (TOC) were 70.3 %, 62.85 % and 32.8 %, respectively. The study provides a new strategy for treating wastewater pollutants by combining CM technology with advanced oxidation processes (AOPs).

engineering, chemical,water resources, environmental
In-situ synthesis of MIL-100(Fe)@chitosan composite beads with hierarchical porous structure for efficient adsorption of chlortetracycline hydrochloride: Synthesis, performance and mechanisms

Si Duan,Yuan Gao,Guihong Lan,Haiyan Qiu,Bo Xu,Zhuang Xie,Songsong Xue,Tianxiong Ou

DOI: https://doi.org/10.1016/j.seppur.2023.125938

IF: 8.6

2023-12-08

Separation and Purification Technology

Abstract:The widespread use of chlortetracycline hydrochloride (CTC) inevitably poses a potential threat to human health and the biological system, and its environmental pollution and ecotoxicological effects cannot be ignored. Herein, we adopted an in-situ growth method to immobilize the powder form of MIL-100(Fe) adsorbent into low-cost chitosan (CS) matrix for the CTC removal. Metal hydroxide (or metal oxide)/CS beads from the acid-dissolved/alkali-solidified self-sphering shaping method were employed as the substrates for MIL-100(Fe) immobilization, allowing it grow uniformly and stably. Notably, this strategy not only reduced the loss in the separation and regeneration process of powdery MIL-100(Fe), but also improved the adsorption capacity of the CS. Isotherm and kinetic studies showed that the Freundlich and PSO models can describe the experimental data better, respectively, and the maximum adsorption capacity of Langmuir can reach 578.03 mg g −1 . Further, the performance of MIL-100@CS-2 composite beads was thoroughly explored by batch experiments and response surface methodology (RSM) to obtain the optimized operating conditions with the highest CTC removal rate. By combining the density functional theory (DFT) calculation with experimental analysis, the adsorption mechanisms of pore filling, hydrogen bonding , electrostatic interaction, π-π EDA interaction, and hydrophilic interaction were proposed. This work provides a reliable basis for the development of shaping adsorbents and has potential application prospects in the treatment of wastewater containing antibiotics.

engineering, chemical
Efficient tetracycline degradation via peroxymonosulfate activation by magnetic Co/N co-doped biochar: Emphasizing the important role of biochar graphitization

Hui Zhu,An Guo,Siming Wang,Yan Long,Guangyin Fan,Xiaojun Yu

DOI: https://doi.org/10.1016/j.cej.2022.138428

IF: 15.1

2022-12-15

Chemical Engineering Journal

Abstract:The accumulation of tetracycline (TC) in aquatic environments raised the risk to ecosystems and human health due to its potential biological toxicity. The development of carbon-based materials with features of low cost, easy isolation and excellent performance for activating peroxymonosulfate (PMS) to generate reactive oxygen species toward TC degradation is essential but remains a grand challenge. Herein, sustainable biomass kelp-derived self-nitrogen doped biochar (KC)-stabilized Co nanoparticles were developed for PMS activation toward TC degradation. The influences of calcination temperature on the microstructure were studied to further optimize the degradation performance for TC. The Co-N/KC-900 exhibited an optimal performance for activating PMS to degrade TC with a removal efficiency of 99 % within 15 min. Additionally, the magnetic Co-N/KC-900 had robust recycling stability because of the enhanced interaction between the Co nanoparticles and graphitized biochar. Characterization results indicated that Co nanoparticles, graphite nitrogen, and direct electron transfer process participate in the PMS activation. Quenching experiments and electron paramagnetic resonance analyses revealed the combined radical and non-radical pathways for TC degradation, and the non-radical pathway plays a dominant role. The possible degradation pathways of tetracycline were proposed, and the toxicity of intermediates in the degradation process was evaluated. This study offers a facile and low-cost strategy to prepare an efficient PMS activator for antibiotic wastewater remediation.
Photocatalytic synergistic biofilms enhance tetracycline degradation and conversion

Chuanbao Xiao,Jilin Yuan,Linyang Li,Nianbing Zhong,Dengjie Zhong,Quanhua Xie,Haixing Chang,Yunlan Xu,Xuefeng He,Min Li

DOI: https://doi.org/10.1016/j.ese.2022.100234

IF: 9.371

2023-04-01

Environmental Science and Ecotechnology

Abstract:Tetracyclines are refractory pollutants that cause persistent harm to the environment and human health. Therefore, it is urgently necessary to develop methods to promote the efficient degradation and conversion of tetracyclines in wastewater. This report proposes a photobiocatalytic synergistic system involving the coupling of GeO2/Zn-doped phosphotungstic acid hydrate/TiO2 (GeO2/Zn-HPW/TiO2)-loaded photocatalytic optical hollow fibers (POHFs) and an algal-bacterial biofilm. The GeO2/Zn-HPW/TiO2 photocatalyst exhibits a broad absorption edge extending to 1000 nm, as well as high-efficiency photoelectric conversion and electron transfer, which allow the GeO2/Zn-HPW/TiO2-coated POHFs to provide high light intensity to promote biofilm growth. The resulting high photocatalytic activity rapidly and stably reduces the toxicity and increases the biodegradability of tetracycline-containing wastewater. The biofilm enriched with Salinarimonas, Coelastrella sp., and Rhizobium, maintains its activity for the rapid photocatalytic degradation and biotransformation of intermediates to generate the O2 required for photocatalysis. Overall, the synergistic photocatalytic biofilm system developed herein provides an effective and efficient approach for the rapid degradation and conversion of water containing high concentrations of tetracycline.

environmental sciences,green & sustainable science & technology

Double insertion of isocyanides into dihydropyridines: direct access to substituted benzimidazolium salts.

Programable sewage-cleaning technology: Regenerating chitosan biofilms with anti-bacterial capacity via self-purification of water pollutants

Synthesis and characterization of well-aligned ZnO:Sb nanowires

Efficient synergistic degradation of tetracycline hydrochloride by protonated g-C3N4 and Chlorella pyrenoidosa: Kinetics and mechanism

MXene-like Carbon Sheet/carbon Nanotubes Derived from Metal-Organic Frameworks for Efficient Removal of Tetracycline by Non-Radical Dominated Advanced Oxidation Processes

Acid-modified red mud biochar for the degradation of tetracycline: Synergistic effect of adsorption and nonradical activation

Elucidating tetracycline degradation in a coupled system of photocatalysis combined with Bacillus cereus

Promoted photocatalytic degradation of tetracycline hydrochloride by montmorillonite catalyst loaded with Cu/Mn

CS/CoFe2O4 nanocomposite as a high-effective and steady chainmail catalyst for tetracycline degradation with peroxymonosulfate activation: performance and mechanism

Efficient degradation of tetracycline in wastewater by novel biochar-based photocatalytic materials: performance, photocatalytic mechanism and degradation pathways

Biodegradation mechanism of chlortetracycline by a novel fungal Aspergillus sp. LS-1

Degradation of chlortetracycline hydrochloride by peroxymonosulfate activation on natural manganese sand through response surface methodology

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Degradation of Tetracycline Hydrochloride by a Novel CDs/g-C3N4/BiPO4 under Visible-Light Irradiation: Reactivity and Mechanism

MOF/bacterial Cellulose Derived Octahedral MnO/carbon Nanofiber Network: A Hybrid for Peroxymonosulfate Activation Toward Degradation of Tetracycline

The surface asymmetric site regulation of carbon nitride oxide enabling peroxymonosulfate activation for degrading tetracycline

Microbial weathering of montmorillonite and its implication for Cd(II) immobilization

Efficient degradation of tetracycline by activated peroxymonosulfate with high permeate flux FeTiO x reactive ceramic membrane: Membrane preparation, real wastewater application, and mechanism insight

In-situ synthesis of MIL-100(Fe)@chitosan composite beads with hierarchical porous structure for efficient adsorption of chlortetracycline hydrochloride: Synthesis, performance and mechanisms

Efficient tetracycline degradation via peroxymonosulfate activation by magnetic Co/N co-doped biochar: Emphasizing the important role of biochar graphitization

Photocatalytic synergistic biofilms enhance tetracycline degradation and conversion