Abstract:Poly(vinyl alcohol) (PVA) aerogels with excellent environmentally friendly properties have been considered to replace undegradable polymer foams. However, due to highly flammable, hydrophilic, and worse compression resistance performance, PVA aerogels have always been excluded from practical. Herein, a fire safety and compression resistance PVA/expansible graphene oxide (EGO)/Layered double hydroxides (LDHs) (PGL) aerogel was prepared via the freeze-drying method and electrostatic adsorption of flame retardant. The ice crystals from aerogels were sublimated and left a mass of tree-like pore tunnel structures. Meantime, the compound of EGO and LDHs rendered PGL aerogels high compressive strength of 6.0917 MPa (at 80% of strains), a high specific modulus of 19.16 m2/s2, and an ultra-low density of 0.059 g/cm3. Especially, the as-prepared PGL aerogels showed heat release reduced by 55.4%, smoke release reduced by 54.3%, and the limiting oxygen index reaching up to 31%. Moreover, LDHs also enhanced the interface with PVA/EGO resulting in hydrophobic performance improvement. The proposed enhancements mechanism suggested that (i) chemical reactions between EGO and PVA matrix; (ii) a mass of negative potential sites from the interface of PVA/EGO composites made LDHs sheets easily adsorbing; (iii) oxygen-containing groups from EGO and LDHs absorbed mass of heat during combustion; (iv) the compact char residues on the surface of aerogels acting as barriers suppressed smoke and prevented PVA matrix from further combustion. Therefore, electrostatic adsorption as a facile production process was paved for meeting the compression resistance, flame-retardant, heat-insulating, and smoke-suppressed requirements of PVA aerogels in this work.

Layer-over-Layer Electrostatic Self-Assembly of Bioresourced Compounds in Thermoreversible Polylactide Gels as an Effective Approach to Enhance the Flame Retardancy of Aerogels

A facile strategy for constructing lightweight, fire safety and compression resistance poly(vinylalcohol) aerogels with highly-efficient expansible graphene oxide/layered double hydroxides hybrid synergistic flame retardant

Preparation, Properties, and Mechanism of Flame-Retardant Poly(vinyl alcohol) Aerogels Based on the Multi-Directional Freezing Method

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Ultra-light polylactic acid/combination composite foam: A fully biodegradable flame retardant material

Dual cross-linked alginate/lignosulfonate—based aerogel with robust flame retardancy and antibacterial property

Preparation of phosphorus-nitrogen synergistic flame retardant cellulose composite aerogel from waste cotton/phytic acid/acrylamide

Enhanced mechanical property and flame resistance of phosphorylated cellulose nanofiber based‐aerogel combined with boric acid

Preparation of a novel bio‐based aerogel with excellent hydrophobic flame‐retardancy and high thermal insulation performance

Enhancing Foamability and Flame‐retardancy of Polylactic Acid Bead Foams Through Inter‐beads Bulk Polymerization and Continuous Phase Dispersion of LDHs

Self-assembly of hydroxyapatite with polyelectrolyte as a green flame retardant for poly(vinyl alcohol)

Rigid and Fire-Resistant All-Biomass Aerogels

A Polyphosphoramide-Grafted Lignin Enabled Thermostable and Fire-Retardant Polylactide with Preserved Mechanical Properties

Ice-Template Crosslinked PVA Aerogels Modified with Tannic Acid and Sodium Alginate

Facile construction of flame‐retardant, heat‐insulating agar/polyvinyl alcohol composite aerogels via in situ formation of magnesium hydroxide and palygorskite‐assisted strategy

Integration of N- and P- elements in sodium alginate aerogels for efficient flame retardant and thermal insulating properties

Zeolitic Imidazolate Framework-8/Polyvinyl Alcohol Hybrid Aerogels with Excellent Flame Retardancy

Anisotropic composite aerogel with thermal insulation and flame retardancy from cellulose nanofibers, calcium alginate and boric acid

Phytic Acid-Based Flame Retardant and Its Application to Poly(lactic Acid) Composites

Efficient approach to improving the flame retardancy of poly(vinyl alcohol)/clay aerogels: incorporating piperazine-modified ammonium polyphosphate

Enhancement of flame retardant performance of bio-based polylactic acid composites with the incorporation of aluminum hypophosphite and expanded graphite