Abstract:Objective. With the strong drive towards miniaturization of active implantable medical devices and the need to improve the resolution of neural stimulation arrays, there is keen interest in the manufacture of small electrodes capable of safe, continuous stimulation. Traditional materials such as platinum do not possess the necessary electrochemical properties to stimulate neurons safely when electrodes are very small (i.e. typically less than about 300 µm (78 400 µm2)). While there are several commercially viable alternative electrode materials such as titanium nitride and iridium oxide, an attractive approach is modification of existing Pt arrays via a high electrochemical capacitance material coating. Such a composite electrode could still take advantage of the wide range of fabrication techniques used to make platinum-based devices. The coating, however, must be biocompatible, exhibit good adhesion and ideally be long lasting when implanted in the body. Approach. Platinum foils were roughened to various degrees with regular arrays of laser milled pits. Conducting diamond films were grown on the foils by microwave plasma chemical vapor deposition. The adhesion strength of the films to the platinum was assessed by prolonged sonication and accelerated aging. Electrochemical properties were evaluated and compared to previous work. Main results. In line with previous results, diamond coatings increased the charge injection capacity of the platinum foil by more than 300% after functionalization within an oxygen plasma. Roughening of the underlying platinum substrate by laser milling was required to generate strong adhesion between the diamond and the Pt foil. Electrical stress testing, near the limits of safe operation, showed that the diamond films were more electrochemically stable than platinum controls. Significance. The article describes a new method to protect platinum electrodes from degradation in vivo. A 300% increase in charge injection means that device designers can safely employ diamond coated platinum stimulation electrodes at much smaller sizes and greater density than is possible for platinum.

Surface modification of multilayer graphene electrodes by local printing of platinum nanoparticles using spark ablation for neural interfacing

Rapid electrophoretic deposition of biocompatible graphene coatings for high-performance recording neural electrodes

Direct Electrodeposition of Graphene Enhanced Conductive Polymer on Microelectrode for Biosensing Application.

Surface Modification to Improve the Electrochemical Performance of Neural Microelectrode Arrays

Electrophoretic Deposition of Platinum Nanoparticles using Ethanol-Water Mixtures Significantly Reduces Neural Electrode Impedance

Long term performance of porous platinum coated neural electrodes

Graphene-based micro-electrodes with reinforced interfaces and tunable porous structures for improved neural recordings

Research Update: Platinum-elastomer mesocomposite as neural electrode coating

Nanoporous graphene-based thin-film microelectrodes for in vivo high-resolution neural recording and stimulation

Optimizing in Vitro Impedance and Physico-Chemical Properties of Neural Electrodes by Electrophoretic Deposition of Pt Nanoparticles

The Potential of Graphene Coatings as Neural Interfaces

Nanoporous gold as a neural interface coating: effects of topography, surface chemistry, and feature size

Nanostructuring Platinum Nanoparticles on Multilayered Graphene Petal Nanosheets for Electrochemical Biosensing

Electrically conducting diamond films grown on platinum foil for neural stimulation

Surface modification of neural stimulating/recording electrodes with high surface area platinum-iridium alloy coatings

Flexible Neural Electrode Array Based-on Porous Graphene for Cortical Microstimulation and Sensing

Biocompatibility of Pristine Graphene for Neuronal Interface.

Platinum‐Iridium Alloy Nanoparticle Coatings Produced by Electrophoretic Deposition Reduce Impedance in 3D Neural Electrodes

Novel multifunctional graphene sheets with encased Au/Ag nanoparticles for advanced electrochemical analysis of organic compounds

Nanoporous Platinum Microelectrode Arrays for Neuroscience Applications

Laminin coated diamond electrodes for neural stimulation