Abstract:Carbon fiber reinforced polymer composites are widely used in the rehabilitation, repair, and strengthening of civil, marine, and naval infrastructure and structural systems. In these applications, they are exposed to a range of exposure conditions, including humidity and immersion, which are known to affect the durability of the resin and the fiber–matrix interface over long periods of time. This paper presents results of long-term hygrothermal aging of wet layup carbon/epoxy composites including through acceleration by temperature focusing on the development of a comprehensive understanding of moisture uptake kinetics and its effects on glass transition temperature and interface and inter-/intra-laminar dominated performance characteristics. A two-phase model for uptake that incorporates both diffusion- and relaxation-/deterioration-dominated regimes, as well as a transition regime, is shown to describe uptake well. The inclusion of damage terms to the diffusion and relaxation coefficients is seen to capture changes well, with the effective diffusion and relaxation coefficients increasing with fiber volume fraction and temperature. Effects of uptake, including at elevated temperatures, reflective of accelerated aging, on glass transition temperature and flexural strength are correlated, emphasizing a three-stage progression of overall response in line with the moisture uptake changes. The drop in glass transition temperature per percent increase in moisture uptake was seen to range from a low of 4.38% per % increase in moisture content, for the highest volume fraction at the highest temperature, to a high of 6.95% per % increase in moisture content, for the intermediate volume fraction at the lowest temperature. The composites with heavier fabric showed the greatest drop in both glass transition temperature and flexural strength, indicating a level of correlation between these characteristics as well. It is shown that both glass transition temperature and flexural strength show steep initial decreases, followed by a regime with slower decrease and, then, an asymptotic or near-asymptotic response with time of immersion, suggesting a close correlation with moisture uptake, which forms the basis for future modeling.

Effect of acidic environment on absorptive, morphological, mechanical, structural, and thermal properties of glass-carbon/epoxy-based hybrid composites

Influence of Long-Term Moisture Exposure and Temperature on the Mechanical Properties of Hybrid FRP Composite Specimens

Dynamic responses and damage/element composition analysis of thermoplastic polyamide reinforced epoxy composites exposed to HCI environment

Impact of the Harsh Environment on E-Glass Epoxy Composite

Effect of saltwater on the mechanical properties of basalt/carbon/glass-epoxy hybrid composites

Investigation of effects of environmental conditions on wear behaviors of glass fiber reinforced polyester composite materials

Impact response of hybrid composites under varying environmental conditions: A comparative study

Moisture and Glass Transition Temperature Kinetics of Ambient-Cured Carbon/Epoxy Composites

Mechanical and dynamic characteristics for the CFRP, GFRP, and hybrid composites exposed to HCl environment

Durability of an Epoxy Resin and Its Carbon Fiber- Reinforced Polymer Composite upon Immersion in Water, Acidic, and Alkaline Solutions

Characterization of Mechanical Properties and Surface Wettability of Epoxy Resin/Benzoxazine Composites in a Simulated Acid Rain Environment

The Study of Chemical and Thermal Influences of the Environment on the Degradation of Mechanical Properties of Carbon Composite with Epoxy Resin

Effects of Immersion and Sustained Bending on Water Absorption and Thermomechanical Properties of Ultraviolet Cured Glass Fiber-Reinforced Acylate Polymer Composites

Study of Heat Treatment Effect on Mechanical Properties of Epoxy Resin Reinforced with Fiber Glass

Study on Hygrothermal Properties of Carbon Fiber Reinforced Composites Aged in Cyclic Environment

Effect of thermal exposure on carbon fiber reinforced composites used in civil infrastructure rehabilitation

Water Absorption and Property Evolution of Epoxy Resin under Hygrothermal Environment

Effect of Immersion in Water or Alkali Solution on the Structures and Properties of Epoxy Resin.

Mechanical Properties Characterization of Glass/Carbon Fiber Hybrid Multilayer Composite under Environmental Aging Condition

Impact of Prolonged Exposure of Eleven Years to Hot Seawater on the Degradation of a Thermoset Composite

Dynamic Mechanical Properties and Thermal Effect of an Epoxy Resin Composite, Encapsulation’s Element of a New Electronic Component