Abstract:Carbon-based products are crucial to our society, but their production from fossil-based carbon is unsustainable. Production pathways based on the reuse of CO2 will achieve ultimate sustainability. Furthermore, the costs of renewable electricity production are decreasing at such a high rate, that electricity is expected to be the main energy carrier from 2040 onward. Electricity-driven novel processes that convert CO2 into chemicals need to be further developed. Microbial electrosynthesis is a biocathode-driven process in which electroactive microorganisms derive electrons from solid-state electrodes to catalyze the reduction of CO2 or organics and generate valuable extracellular multicarbon reduced products. Microorganisms can be tuned to high-rate and selective product formation. Optimization and upscaling of microbial electrosynthesis to practical, real life applications is dependent upon performance improvement while maintaining low cost. Extensive biofilm development, enhanced electron transfer rate from solid-state electrodes to microorganisms and increased chemical production rate require optimized microbial consortia, efficient reactor designs, and improved cathode materials. This Account is about the development of different electrode materials purposely designed for improved microbial electrosynthesis: NanoWeb-RVC and EPD-3D. Both types of electrodes are biocompatible, highly conductive three-dimensional hierarchical porous structures. Both chemical vapor deposition (CVD) and electrophoretic deposition were used to grow homogeneous and uniform carbon nanotube layers on the honeycomb structure of reticulated vitreous carbon. The high surface area to volume ratio of these electrodes maximizes the available surface area for biofilm development, i.e., enabling an increased catalyst loading. Simultaneously, the nanostructure makes it possible for a continuous electroactive biofilm to be formed, with increased electron transfer rate and high Coulombic efficiencies. Fully autotrophic biofilms from mixed cultures developed on both types of electrodes rely on CO2 as the sole carbon source and the solid-state electrode as the unique energy supply. We present first the synthesis and characteristics of the bare electrodes. We then report the outstanding performance indicators of these novel biocathodes: current densities up to -200 A m-2 and acetate production rates up to 1330 g m-2 day-1, with electron and CO2 recoveries into acetate being very close to 100% for mature biofilms. The performance indicators are still among the highest reported by either purposely designed or commercially available biocathodes. Finally, we made use of the titration and off-gas analysis sensor (TOGA) to elucidate the electron transfer mechanism in these efficient biocathodes. Planktonic cells in the catholyte were found irrelevant for acetate production. We identified the electron transfer to be mediated by biologically induced H2. H2 is not detected in the headspace of the reactors, unless CO2 feeding is interrupted or the cathodes sterilized. Thus, the biofilm is extremely efficient in consuming the generated H2. Finally, we successfully demonstrated the use of a synthetic biogas mixture as a CO2 source. We thus proved the potential of microbial electrosynthesis for the simultaneous upgrading of biogas, while fixating CO2 via the production of acetate.

Comparing the performance of fluidized and fixed granular activated carbon beds as cathodes for microbial electrosynthesis of carboxylates from CO2

Novel electrochemical strategies for the microbial conversion of CO2 into biomass and volatile fatty acids using a fluid‐like bed electrode in a three‐phase reactor

Impact of cathodic pH and bioaugmentation on acetate and CH4 production in a microbial electrosynthesis cell

Efficient microbial electrosynthesis through the barrier and shearing effect of fillers

Flow-Electrode Microbial Electrosynthesis for Increasing Production Rates and Lowering Energy Consumption

Improved reactor design enables productivity of microbial electrosynthesis on par with classical biotechnology

Microbial electrosynthesis feasibility evaluation at high bicarbonate concentrations with enriched homoacetogenic biocathode

Carbon dioxide reduction by mixed and pure cultures in microbial electrosynthesis using an assembly of graphite felt and stainless steel as a cathode

Effect of different hydrogen evolution rates at cathode on bioelectrochemical reduction of CO 2 to acetate

Zeolitic imidazolate framework-8 modified cathode promotes microbial electrosynthesis from carbon dioxide

Conductive Materials on Biocathodes Altered the Electron-Transfer Paths and Modulated Γ-Hch Dechlorination and CH4 Production in Microbial Electrochemical Systems

Enhanced microbial electrosynthesis performance with 3-D algal electrodes under high CO2 sparging: Superior biofilm stability and biocathode-plankton interactions

Electrochemical Regulation on the Metabolism of Anode Biofilms under Persistent Exogenous Bacteria Interference

Effect of Electroactive Biofilm Formation on Acetic Acid Production in Anaerobic Sludge Driven Microbial Electrosynthesis

Gas Diffusion Electrodes Modified With Binary Doped Polyaniline For Enhanced Co2 Conversion During Microbial Electrosynthesis

Purposely Designed Hierarchical Porous Electrodes for High Rate Microbial Electrosynthesis of Acetate from Carbon Dioxide.

Co3O4/C derived from ZIF-67 cathode enhances the microbial electrosynthesis of acetate from CO2

Effects of High Ammonia Loading and In-Situ Short-Cut Nitrification in Low Carbon‑nitrogen Ratio Wastewater Treatment by Biocathode Microbial Electrochemical System.

Cathode materials in microbial electrosynthesis systems for carbon dioxide reduction: recent progress and perspectives

Enhanced CO2 Conversion to Acetate through Microbial Electrosynthesis (MES) by Continuous Headspace Gas Recirculation

Impact analysis of operating conditions on carbon dioxide reduction in microbial electrosynthesis: Insight into the substance utilization and microbial response