Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

Radical Polymer-based Positive Electrodes for Dual-Ion Batteries: Enhancing Performance with γ-Butyrolactone-based Electrolytes

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

A PF 6 − ‐Permselective Polymer Electrolyte with Anion Solvation Regulation Enabling Long‐Cycle Dual‐Ion Battery

Polysiloxane-Based Single-Ion Conducting Polymer Electrolyte for High-Performance Li‖NMC<sub>811</sub> Batteries

Dual In Situ Polymerization Strategy Endowing Rapid Ion Transfer Capability of Polymer Electrolyte toward Ni‐Rich‐Based Lithium Metal Batteries

Unlocking Mechanism of Anion and Cation Interaction on Ion Conduction of Polymer Based Electrolyte in Metal Batteries

Solid Polymer Electrolytes with Sacrificial End Groups for a Wide Oxidative Potential and Stable Interface in Lithium Metal Batteries

A redox-active porous polymer based on poly(imide-triazine) as a high-performance cathode for lithium-ion batteries

Self-Standing Single-Ion Borate Salt-Based Polymer Electrolyte for Lithium Metal Batteries

Performance Improvement of Gel Polymer Electrolyte with 2D Bimetallic MOF for Advanced Lithium-Ion Batteries

Conjugated Diketone-Linked Polyimide Cathode Material for Organic Lithium-Ion Batteries

Enhanced Performance of Lithium Metal Batteries via Cyclic Fluorinated Ether Based Electrolytes

Rational design of a topological polymeric solid electrolyte for high-performance all-solid-state alkali metal batteries

Conjugated Microporous Polymers with Bipolar and Double Redox‐Active Centers for High‐Performance Dual‐Ion, Organic Symmetric Battery

An All‐Fluorinated Electrolyte Toward High Voltage and Long Cycle Performance Dual‐Ion Batteries

Poly (vinyl Ethylene Carbonate)-Based Dual-Salt Gel Polymer Electrolyte Enabling High Voltage Lithium Metal Batteries

Design and Synthesis of Viologen‐based Copolymers for High Performance Li‐Dual‐Ion Batteries

Imino-Linked Carbonyl-Enriched Polymer as a High-Performance Cathode Material for Lithium-Ion Batteries

Mechanically and Thermally Robust Gel Electrolytes Built from A Charged Double Helical Polymer

Solid Polymer Electrolytes with Dual Salts Enhance Lithium-Metal Interfacial Stability for Long Cycle Performance of Lithium Batteries