Vitamin A ester formed by rat intestinal sections from beta-carotene.

C. Hou,K. Harashima,S. Funahashi

Abstract:

What problem does this paper attempt to address?

Nontoxic Carbon Quantum Dots/g-C N for Efficient Photocatalytic Inactivation of Staphylococcus aureus under Visible Light.

Chenyi Tang,Chao Liu,Yu Han,Qiaoqi Guo,Wei Ouyang,Huajun Feng,Meizhen Wang,Feng Xu

DOI: https://doi.org/10.1002/adhm.201801534

IF: 10

2019-01-01

Advanced Healthcare Materials

Abstract:The widespread use of antibiotics has caused the rapid emergence of antibiotic-resistant bacterial strains and antibiotic resistance genes in the past few decades. Photocatalytic inactivation, a promising approach for the killing of pathogens, efficiently avoids the problems induced by antimicrobial drugs. However, traditional photocatalysts usually have some disadvantages, such as high costs of raw materials, ultraviolet ray excitation, and potential leaching of toxic metals. Here, a metal-free heterojunction photocatalyst, denoted as CQDs/g-C3N4, is synthesized through incorporating carbon quantum dots (CQDs) on graphitic carbon nitride (g-C3N4), which significantly enhances photocatalytic inactivation of Staphylococcus aureus (S. aureus) compared with pure g-C3N4 in vitro. CQDs/g-C3N4 causes a rapid increase of intracellular reactive oxygen species levels and destruction of cell membranes under visible light, eventually leading to death of bacteria. The efficacy of CQDs/g-C3N4 is further examined by a mouse cutaneous infection model of S. aureus. CQDs/g-C3N4 markedly reduces the bacterial loads and prompts lesion recovery in mice, as compared with g-C3N4-treated group. In vivo and in vitro toxicity analyses show that the side effects of CQDs/g-C3N4 are negligible. Considering the efficient photocatalytic inactivation and nontoxicity of CQDs/g-C3N4, this visible-light-driven photocatalyst paves a brand new avenue for the treatment of S. aureus infection.
Cuprous Oxide–demethyleneberberine Nanospheres for Single Near-Infrared Light-Triggered Photoresponsive-Enhanced Enzymatic Synergistic Antibacterial Therapy

Tao Wang,Xiao-Chan Yang,Yong Ding,Yu-Jiao Zhang,Yu-Qing Ru,Jia-Jun Tan,Fang Xu,Wei-Wei Gao,Ya-Mu Xia

DOI: https://doi.org/10.1039/d2tb02594a

IF: 7.571

2023-01-01

Journal of Materials Chemistry B

Abstract:In this work, novel cuprous oxide-demethyleneberberine (Cu2O-DMB) nanomaterials are successfully synthesized for photoresponsive-enhanced enzymatic synergistic antibacterial therapy under near-infrared (NIR) irradiation (808 nm). Cu2O-DMB has a spherical morphology with a smaller nanosize and positive ζ potential, can trap bacteria through electrostatic interactions resulting in a targeting function. Cu2O-DMB nanospheres show both oxidase-like and peroxidase-like activities, and serve as a self-cascade platform, which can deplete high concentrations of GSH to produce O2˙- and H2O2, then H2O2 is transformed into ˙OH, without introducing exogenous H2O2. At the same time, Cu2O-DMB nanospheres become photoresponsive, producing 1O2 and having an efficient photothermal conversion effect upon NIR irradiation. The proposed mechanism is that the generated ROS (O2˙-, ˙OH and 1O2) and hyperthermia can have synergetic effects for killing bacteria. Moreover, hyperthermia is not only beneficial for destroying bacteria, but also effectively enhances the efficiency of ˙OH production and accelerates GSH oxidation. Upon NIR irradiation, Cu2O-DMB nanospheres exhibit excellent antibacterial ability against methicillin-resistant Staphylococcus aureus (MRSA) and ampicillin-resistant Escherichia coli (AREC) with low cytotoxicity and bare bacterial resistance, destroy the bacterial membrane causing an efflux of proteins and disrupt the bacterial biofilm formation. Animal experiments show that the Cu2O-DMB + NIR group can efficiently treat MRSA infection and promote wound healing. These results suggest that Cu2O-DMB nanospheres are effective materials for combating bacterial infections highly efficiently and to aid the development of photoresponsive enzymatic synergistic antibacterial therapy.
Nontoxic Carbon Quantum Dots/g-C 3 N 4 for Efficient Photocatalytic Inactivation of Staphylococcus aureus under Visible Light

Tang Chenyi,Chao Liu,Yu Han,Guo Qiaoqi,Wei Ouyang,Huajun Feng,Meizhen Wang,Feng Xu

DOI: https://doi.org/10.1002/adhm.201801534

IF: 10

2019-01-01

Advanced Healthcare Materials

Abstract:The widespread use of antibiotics has caused the rapid emergence of antibiotic-resistant bacterial strains and antibiotic resistance genes in the past few decades. Photocatalytic inactivation, a promising approach for the killing of pathogens, efficiently avoids the problems induced by antimicrobial drugs. However, traditional photocatalysts usually have some disadvantages, such as high costs of raw materials, ultraviolet ray excitation, and potential leaching of toxic metals. Here, a metal-free heterojunction photocatalyst, denoted as CQDs/g-C3 N4 , is synthesized through incorporating carbon quantum dots (CQDs) on graphitic carbon nitride (g-C3 N4 ), which significantly enhances photocatalytic inactivation of Staphylococcus aureus (S. aureus) compared with pure g-C3 N4 in vitro. CQDs/g-C3 N4 causes a rapid increase of intracellular reactive oxygen species levels and destruction of cell membranes under visible light, eventually leading to death of bacteria. The efficacy of CQDs/g-C3 N4 is further examined by a mouse cutaneous infection model of S. aureus. CQDs/g-C3 N4 markedly reduces the bacterial loads and prompts lesion recovery in mice, as compared with g-C3 N4 -treated group. In vivo and in vitro toxicity analyses show that the side effects of CQDs/g-C3 N4 are negligible. Considering the efficient photocatalytic inactivation and nontoxicity of CQDs/g-C3 N4 , this visible-light-driven photocatalyst paves a brand new avenue for the treatment of S. aureus infection.
Visible-light-activated antibacterial and antipollutant properties of biocompatible Cu-doped and Ag-decorated TiO2 nanoparticles

Panagiotis Tzevelekidis,Maria Theodosiou,Athina Papadopoulou,Elias Sakellis,Nikos Boukos,Alexandros K Bikogiannakis,Georgios Kyriakou,Eleni K Efthimiadou,Christiana A Mitsopoulou

DOI: https://doi.org/10.1016/j.heliyon.2024.e35634

IF: 3.776

2024-08-08

Heliyon

Abstract:Optical and photocatalytic restrictions of anatase TiO2 nanoparticles (Nps) limit their potential applications, as antipollutant and antibacterial agents for sanitary applications, to the UV spectral region. While modification with transition metals extends the absorption capacity to the visible light spectrum, often undermines the photocatalysts' biocompatibility due to toxic ion leaching. In this study, we synthesized Cu-doped and Ag-decorated TiO2 photocatalysts by employing solvothermal (ATiO2:Cu) and sol-gel synthetic procedures (BTiO2:Ag), respectively. We acquired TiO2 Nps modified with three percentages of either Cu or Ag content, to examine the potential differentiation of their structural, photocatalytic, and biological impact. Comprehensive structural characterization supports the prevailing anatase crystalline structure of bare and modified titania nanostructures, while morphological differences are demonstrated among the different samples. Optical response in the visible region of ATiO2:Cu Nps stems from band gap narrowing and lattice-defect generation, while plasmonic effects are at play for BTiO2:Ag Nps. Their photocatalytic potential under visible light irradiation, originated from low-energy LED lamps commonly found in indoor spaces, was verified after monitoring the successful enhancement of methylene blue (MB) degradation rate. Safety assessment on immortalized healthy human keratinocyte cell line (HaCaT) revealed their biocompatibility up to a certain concentration, while reactive oxygen species (ROS) production was intensified after light irradiation. The visible-light-induced photocatalytic-driven antibacterial activity was confirmed against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli.
Unveiling the bacterial photoinactivation through cerium-gallium titanate nanotubes

Michelle de P. Madeira,Keyla R. B. da Silva Costa,Idglan S. de Lima,Humberto M. Barreto,Ramón R. Peña Garcia,Eduardo R. Triboni,Edson C. Silva-Filho,Bartolomeu C. Viana,Juan Antonio Cecilia,Josy A. Osajima

DOI: https://doi.org/10.1016/j.jphotochem.2024.115483

IF: 5.141

2024-01-30

Journal of Photochemistry and Photobiology A Chemistry

Abstract:Ion exchange may improve the surface and optical properties of titanate nanotubes, impacting their antibacterial performance. This work presents a characterization and antibacterial evaluation of titanate nanotubes exchanged with cerium and/or gallium. Analyzes of the chemical composition of the samples show that the ion exchange was satisfactory. Transmission electron microscopy images illustrate the preserved tubular morphology, and Brunauer-Emmet-Teller analysis indicates a considerable increase in surface area. The increased textural properties could be due to the presence of voids between adjacent particles of oxides and/or hydroxides of cerium or gallium deposited on the titanates. The band gap of nanotubes with cerium (2.87 eV) or cerium/gallium (2.88 eV) allows their excitation under light. Direct contact assays found that the cerium/gallium nanotubes increased inhibitory effects of S. aureus (83.1 ± 23.9 %) and E. coli (70.3 ± 20.6 %) under light. Hydroxyl radicals may be mainly responsible for the photoinactivation of bacteria. The increase in the surface area of the nanotubes, the effects of the interaction of cerium and gallium with bacteria, and the generation of reactive oxygen species under light explain the results obtained. Therefore, these nanotubes are promising in photoinduced reactions.

chemistry, physical
Efficient Fabrication of Cu-Doped TiO2 Nanoparticles for Enhanced Visible Light Photocatalysis and Antimicrobial Efficacy

Amna Azam,Tahir Iqbal

DOI: https://doi.org/10.1007/s10904-024-03232-y

IF: 3.518

2024-07-13

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:In order to enhance photocatalytic degradation and antibacterial activities, copper doped titanium dioxide has been synthesized in this work. The samples were analyzed by X-ray diffraction, Energy dispersive X-ray diffraction, Raman spectroscopy, UV–Vis spectroscopy, Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller (BET) analysis. The rutile phase tetragonal structure of both pure and Cu/TiO 2 has been shown by XRD data. It is discovered that nanoparticle average crystallite sizes were for pure and Cu-TiO 2 is in the range of 8.6–16.50 nm. The band gap decrease trend in this research is approximately followed from 3.42–2.86 eV. Cu-TiO 2 has the best photocatalytic behavior and doping in TiO 2 material changes its structure appears to increase the photocatalytic activity. The SEM images additionally determined the particle size within the approximately 15.5 nm range. The Tauc plots were utilized to identify the nanoparticles optical band gap. The surface study of optimized sample has been analyzed using BET analysis. Research on the characterization of copper doped TiO 2 nanoparticles that demonstrate a significant increase in the photocatalytic activity could also be expected to increase the shelf life of fruit storage. In order to investigate its biological activities for example antimicrobial and antifungal properties this research has been utilize as the awareness for the fabrication of copper nanoparticles. Due to its exceptional qualities, the material under study is also thought to present a viable alternative for the creation of intelligent systems that detect pathogens and act as antimicrobial agents.

polymer science
Visible Light-Driven Photocatalysis and Antibacterial Performance of a Cu-TiO 2 Nanocomposite

Michele S. de Lima,Aline L. Schio,Cesar Aguzzoli,Wellington V. de Souza,Mariana Roesch-Ely,Leonardo M. Leidens,Carla D. Boeira,Fernando Alvarez,Mariana A. Elois,Gislaine Fongaro,Carlos A. Figueroa,Alexandre F. Michels

DOI: https://doi.org/10.1021/acsomega.4c07515

IF: 4.1

2024-12-04

ACS Omega

Abstract:A Cu-TiO(2) nanomaterial with unique antibacterial and photocatalytic properties is introduced in this study. Cu-TiO(2) nanocomposites were obtained using an adapted direct current magnetron sputtering apparatus, where TiO(2) anatase nanoparticles (NPs) were used as the substrates and copper as the sputtering target. The obtained powder was characterized by physical and chemical methods. Copper was deposited on TiO(2) NPs for 30 and 60 min, resulting in two samples with different copper contents...

chemistry, multidisciplinary
NIR-triggered photocatalytic and photothermal performance for sterilization based on copper sulfide nanoparticles anchored on Ti3C2T MXene

Qiyuan Li,Wei Wang,Huimeng Feng,Lin Cao,Hongfen Wang,Di Wang,Shougang Chen

DOI: https://doi.org/10.1016/j.jcis.2021.07.048

IF: 9.9

2021-12-01

Journal of Colloid and Interface Science

Abstract:Harmful bacterial flourish with the increase in environmental pollution and pose a great threat to human health. Thus, developing new and efficient antibacterial materials is imperative to reduce the pollution caused by traditional sterilization materials and improve sterilization efficiency. In this study, a new photocatalytic antibacterial material was developed to achieve an efficient antibacterial effect. Ti3C2Tx@CuS composites were synthesized by simple hydrothermal method, by which copper sulfide (CuS) nanoparticles were anchored on the surface of Ti3C2Tx to sharply improve the photocatalytic its antibacterial ability. Ti3C2Tx@CuS exhibits excellent antibacterial activity against Escherichia coli and Staphylococcus aureus with bactericidal rates of 99.6% and 99.1%, respectively. Photoluminescence spectroscopy (PL), decay time PL, photocurrent test, electrochemical impedance spectroscopy and finite element method showed that the formation of Ti3C2Tx@CuS heterojunction promoted the separation of electrons and holes, improved the electron transport efficiency, and elevated the generation of reactive oxygen species. Moreover, Ti3C2Tx@CuS has a stronger photothermal effect and causes more heat release than CuS to improve antibacterial performance. The Ti3C2Tx@CuS heterojunction has a broad application prospect in the disinfection and antibacterial fields.

chemistry, physical
Synthesis of Mn and Se-Doping TiO2 Mesoporous Materials and Their Antibacterial Efficacy under Visible Light Irradiation

Sheng Chu,Haoyue Zhu,Min Xue,Leilei Luo,Fei Kong,Ying Wang,Zhigang Zou

DOI: https://doi.org/10.4028/www.scientific.net/amr.287-290.1852

2011-01-01

Advanced Materials Research

Abstract:Two kinds of visible light driven mesoporous structured Mn and Se-doping TiO2 nanocrystal photocatalysts have been synthesized through a modified sol-gel method, and N2 adsorption-desorption isotherm confirms that the mesoporous materials possess large pore size and narrow pore size distribution. X-Ray powder Diffraction (XRD) analyses reveal that the doping of Mn and Se inhibits the growth of TiO2 anatase nanocrystal and the Mn species are higher dispersed on the surface of TiO2. Ultraviolet (UV)-vis spectrum demonstrates the excellent adsorption property of Mn doping TiO2 for visible light region, which enables this novel photocatalysis material to possess remarkable activity in photocatalytic antibacterial for E. Coli. bacteria under visible lights radiation.
LED-driven sulfamethazine removal and bacterial disinfection by a novel photocatalytic textile impregnated with oxygen vacancy-rich BiO 2-x /g-C 3 N 4 hybrid

Jing Wang,Qingfeng Fan,Lidong Kou,Huan Chen,Xing Xing,Wenjie Duan,Kai Jiang

DOI: https://doi.org/10.1016/j.cej.2023.145590

IF: 15.1

2023-08-31

Chemical Engineering Journal

Abstract:Oxygen vacancies (OVs) and heterostructures of photocatalysts play crucial roles in photocatalysis driven by visible light. In this study, a novel photocatalytic textile was prepared by spraying heterostructures of OVs-rich bismuth oxide (BiO 2-x ) and urea-derived graphitic carbon nitride (UCN) on amine group-modified poly(acrylonitrile) nonwoven textile (APAN), and then studied for sulfamethazine (SMT) removal and bacterial ( S. aureus ) disinfection under irradiation of energy-efficient white light emitting diodes (LEDs). The optimal BiO 2-x , prepared within a much shorter time (i.e. 1 h), was actually a ternary mixture of NaBiO 3 -Bi 2 O 3 -BiO 2-x with rich OVs rather than pure BiO 2-x . Incorporation of UCN could help redistribute electrons and induce formation of more OVs, thereby improve the photocatalytic activity of the BU-0.2 hybrid (i.e. mass ratio of BiO 2-x /UCN = 1:0.2). The BU-0.2 could use full-spectrum white light (i.e. 380–760 nm) to achieve superior SMT removal in a wide pH range (pH 5.0–9.0) and in the co-presence of common water constituents. The enhanced photocatalytic performance of BU-0.2 was attributed to the formation of OVs and heterostructure, which could broaden light absorption, help charges separation, and favor adsorption and activation of molecular O 2 . Detection of reactive species demonstrated that 1 O 2 and holes were the dominant factors responsible for SMT removal. Spraying deposition of BU-0.2 on APAN could endow the resultant textile (i.e. APAN-BU-0.2) with excellent photocatalytic activity for SMT removal and bacterial disinfection under LED white light irradiation. The as-prepared photocatalysts showed promising application prospects in purification of emerging pollutants utilizing LED white light.

engineering, chemical, environmental
Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts

Magda Kozak,Paweł Mazierski,Joanna Żebrowska,Tomasz Klimczuk,Wojciech Lisowski,Andrzej M. Żak,Piotr M. Skowron,Adriana Zaleska-Medynska

DOI: https://doi.org/10.3390/nano14050409

IF: 5.3

2024-02-23

Nanomaterials

Abstract:The use of heterogeneous photocatalysis in biologically contaminated water purification processes still requires the development of materials active in visible light, preferably in the form of thin films. Herein, we report nanotube structures made of TiO2/Ag2O/Au0, TiO2/Ag2O/PtOx, TiO2/Cu2O/Au0, and TiO2/Cu2O/PtOx obtained via one-step anodic oxidation of the titanium-based alloys (Ti94Ag5Au1, Ti94Cu5Pt1, Ti94Cu5Au1, and Ti94Ag5Pt1) possessing high visible light activity in the inactivation process of methicillin-susceptible S. aureus and other pathogenic bacteria—E. coli, Clostridium sp., and K. oxytoca. In the samples made from Ti-based alloys, metal/metal oxide nanoparticles were formed, which were located on the surface and inside the walls of the NTs. The obtained results showed that oxygen species produced at the surface of irradiated photocatalysts and the presence of copper and silver species in the photoactive layers both contributed to the inactivation of bacteria. Photocatalytic inactivation of E. coli, S. aureus, and Clostridium sp. was confirmed via TEM imaging of bacterium cell destruction and the detection of CO2 as a result of bacteria cell mineralization for the most active sample. These results suggest that the membrane ruptures as a result of the attack of active oxygen species, and then, both the membrane and the contents are mineralized to CO2.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Self-redox reaction driven in situ formation of Cu2O/Ti3C2Tx nanosheets boost the photocatalytic eradication of multi-drug resistant bacteria from infected wound

Ya-Ju Hsu,Amit Nain,Yu-Feng Lin,Yu-Ting Tseng,Yu-Jia Li,Arumugam Sangili,Pavitra Srivastava,Hui-Ling Yu,Yu-Fen Huang,Chih-Ching Huang,Huan-Tsung Chang

DOI: https://doi.org/10.1186/s12951-022-01428-3

IF: 10.2

2022-05-20

Journal of Nanobiotechnology

Abstract:Background MXenes with interesting optical and electrical properties have been attractive in biomedical applications such as antibacterial and anticancer agents, but their low photogeneration efficiency of reactive oxygen species (ROS) and poor stability are major concerns against microbial resistance. Methods Water-dispersible single layer Ti 3 C 2 T x -based MXene through etching tightly stacked MAX phase precursor using a minimally intensive layer delamination method. After addition of Cu(II) ions, the adsorbed Cu(II) ions underwent self-redox reactions with the surface oxygenated moieties of MXene, leading to in situ formation of Cu 2 O species to yield Cu 2 O/Ti 3 C 2 T x nanosheets (heterostructures). Results Under NIR irradiation, the Cu 2 O enhanced generation of electron–hole pairs, which boosted the photocatalytic production of superoxide and subsequent transformation into hydrogen peroxide. Broad-spectrum antimicrobial performance of Cu 2 O/Ti 3 C 2 T x nanosheets with sharp edges is attributed to the direct contact-induced membrane disruption, localized photothermal therapy, and in situ generated cytotoxic free radicals. The minimum inhibitory concentration of Cu 2 O/Ti 3 C 2 T x nanosheets reduced at least tenfold upon NIR laser irradiation compared to pristine Cu 2 O/Ti 3 C 2 T x nanosheets. The Cu 2 O/Ti 3 C 2 T x nanosheets were topically administrated on the methicillin-resistant Staphylococcus aureus (MRSA) infected wounds on diabetic mice. Conclusion Upon NIR illumination, Cu 2 O/Ti 3 C 2 T x nanosheets eradicated MRSA and their associated biofilm to promote wound healing. The Cu 2 O/Ti 3 C 2 T x nanosheets with superior catalytic and photothermal properties have a great scope as an effective antimicrobial modality for the treatment of infected wounds. Graphical

biotechnology & applied microbiology,nanoscience & nanotechnology
Preparation of C@CuNi/TiO 2 with a local surface plasmon resonance for photocatalytic degradation of organic dyes and antibiotics under visible light irradiation

Yunfei Yang,Hongfang Shen,Congcong Ma,Dong Li,Bo Ma,Youjun Lu,Yanmin Wang

DOI: https://doi.org/10.1016/j.colsurfa.2024.135406

IF: 5.518

2024-09-26

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:A composite photocatalyst with carbon-coated CuNi nanoparticles-loaded TiO 2 nanotubes (C@CuNi/TiO 2 ) was synthesized via a microwave hydrothermal alkali stripping method combined with subsequent in-situ carbothermal reduction. The structure, morphology, and surface chemical composition were investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The findings demonstrate that the microwave hydrothermal alkali peeling enables the formation of a three-dimensional C@CuNi/TiO 2 composite structure. The results of transient photocurrent response ( i - t ) and electrochemical impedance spectroscopy under visible light demonstrate that C@CuNi/TiO 2 exhibits a reduced rate of electron-hole recombination and lower surface resistance compared to C@TiO 2 , C@Cu/TiO 2 , and C@Ni/TiO 2 . After a two-hour exposure to visible light, the composite photocatalyst C@CuNi/TiO 2 , featuring a molar ratio of 2 % CuNi nanoparticles to TiO 2 nanotubes, exhibited remarkable degradation activity towards organic dyes (Rhodamine B (RhB), Methylene Blue (MB), Methyl Orange (MO)), as well as antibiotics (tetracycline (TC) and levofloxacin (LVFX)). After 5 cycles of photocatalytic reaction, the photodegradation activity of RhB remained above 79 %. It is indicated that CuNi nanoparticles effectively trap and enrich photoelectrons through the photoexcitation of TiO 2 nanotubes. Additionally, the local surface plasmonic resonance (LSPR) effect of CuNi nanoparticles reduces the recombination rate of photogenerated electron/hole and the electron transport resistance in the composite photocatalyst, thereby enhancing its overall photocatalytic activity.

chemistry, physical
Photocatalytic Nanocomposite Based on Titanate Nanotubes Decorated with Plasmonic Nanoparticles for Enhanced Broad-Spectrum Antibacterial Activity

Mostafa Fytory,Shaimaa A Khalid,Ayman H Zaki,Wolfgang Fritzsche,Hassan M E Azzazy

DOI: https://doi.org/10.1021/acsabm.4c00877

2024-10-21

Abstract:Infections resulting from microorganisms pose an ongoing global public health challenge, necessitating the constant development of novel antimicrobial approaches. Utilizing photocatalytic materials to generate reactive oxygen species (ROS) presents an appealing strategy for combating microbial threats. In alignment with this perspective, sodium titanate nanotubes were prepared by scalable hydrothermal method using TiO2 and NaOH. Ag, Au, and Ag/Au-modified titanate nanotubes (TNTs) were prepared by a cost-effective and simple ion-exchange method. All samples were characterized by XRD, FT-IR, HRTEM, and DLS techniques. HRTEM images indicated that the tubular structure was preserved in all TNTs even after the replacement of Na+ with Ag+ and/or Au3+ ions. The antibacterial activity in dark and sunlight conditions was evaluated using different bacterial strains, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results showed that while a low bacterial count (∼log 5 cells per well) was used for inoculation, the TNTs exhibited no antibacterial activity against the three bacterial strains, regardless of whether they were tested under light or dark conditions. However, the plasmonic nanoparticle-decorated TNTs showed remarkable activity in the dark. Additionally, Ag/Au-TNTs demonstrated significantly higher activity in the dark compared with either Ag-TNTs or Au-TNTs alone. Notably, under dark conditions, the Au/Ag-TNTs achieved log reductions of up to 4.5 for P. aeruginosa, 5 for S. aureus, and 3.7 for E. coli. However, when exposed to sunlight, Au/Ag-TNTs resulted in a complete reduction (log reduction ∼9) for P. aeruginosa and E. coli. The combination of two plasmonic nanoparticles (Ag/Au) decorated on the surface of TNTs showed synergetic bactericidal activity under both dark and light conditions. Ag/Au-TNTs could be explored to design surfaces that are responsive to visible light and exhibit antimicrobial properties.
Enhanced activation of peroxymonosulfate by a floating Cu0-MoS2/C3N4 photocatalyst under visible-light assistance for tetracyclines degradation and Escherichia coli inactivation

Yiyang Liu,Xuejiang Wang,Qiunan Sun,Liuyu Chen,Meng Yuan,Zhenhua Sun,Yanan Zhang,Siqing Xia,Jianfu Zhao

DOI: https://doi.org/10.1016/j.cej.2022.141220

IF: 15.1

2023-02-01

Chemical Engineering Journal

Abstract:Transition metal-based photocatalysts have recently attracted much attention in photo-induced Peroxymonosulfate (PMS) activation systems. Herein, a novel floating catalyst Cu0-MoS2/C3N4-expanded graphite (Cu-MSCN-EG) was prepared by a chemical reduction method and applied as a PMS activator to remove tetracyclines (TCs) and inactivate Escherichia coli under visible light irradiation in aqueous solution. Over 99.0 % of TCs and Escherichia coli could be removed and inactivated within 1 h in Vis/PMS/Cu-MSCN-EG system. Compared to the MoS2/C3N4-EG system, the loading of zero-valent copper in the Vis/PMS/Cu-MSCN-EG system increased the reaction rate by 278 %. Raman spectroscopy and density functional theory (DFT) calculations indicated that ·OH and 1O2 were generated via two different adsorption patterns between PMS and copper (≡Cu+-OSO3 -–OH and ≡Cu+–OH-OSO3 -). With the light assistance, the photo-induced electrons reduced the copper leaching and enhanced the generation of ·SO4 - and ·O2 –, leading to a high recyclability and mineralization rate. Overall, this study provides a new insight into the fabrication of copper-based PMS activator with high efficiency and durability for contaminants degradation and pathogen inactivation.

engineering, chemical, environmental
The Enhanced Near-Infrared Photocatalytic and Photothermal Effects of MXene-based Heterojunction for Rapid Bacteria-Killing

Qian Wu,Lei Tan,Xiangmei Liu,Zhaoyang Li,Yu Zhang,Yufeng Zheng,Yanqin Liang,Zhenduo Cui,Shengli Zhu,Shuilin Wu

DOI: https://doi.org/10.1016/j.apcatb.2021.120500

2021-01-01

Abstract:Bacterial resistance threatens the health of human beings when they combat pathogenic diseases with antibiotics. Herein, an ecofriendly and antibiotics-free 0D/2D Schottky heterojunction (Ag2S/Ti3C2) was synthesized for the first time to treat bacterial infection with a high efficacy of 99.99% within 20 min under 808 nm NIR light irradiation, which was ascribed to the synergy of enhanced photocatalytic and photothermal effects. The density functional theory calculations show that when a redistribution of charge occurs at the interface between Ag2S and Ti3C2 due to the difference in their Fermi energy levels (EF), it results in an upward bend of the Ag2S energy band. Additionally, in the case of Ag2S/Ti3C2, the higher conduction band energy of Ag2S compared to the EF of Ti3C2 and the excellent electrical conductivity of the latter made the photoexcited electrons in Ag2S, including those hot electrons produced by surface plasma resonance (SPR), rapidly flow to Ti3C2, thus greatly increasing both photocatalytic and photothermal performance of Ti3C2. In vitro and in vivo tests showed that this photoresponsive system possessed not only highly effective antibacterial efficacy against Staphylococcus aureus infection but also excellent biocompatibility simultaneously. Therefore, this hybrid is expected to be a promising ecofriendly platform for the rapid treatment of bacterial infections using NIR light.
Extensive solar light utilizing by ternary C-dots/Cu2O/SrTiO3: Highly enhanced photocatalytic degradation of antibiotics and inactivation of E. coli

Yuanyuan Zhang,Yue Li,Zhaohui Ruan,Yuan Yuan,Kaifeng Lin

DOI: https://doi.org/10.1016/j.chemosphere.2021.133340

IF: 8.8

2022-03-01

Chemosphere

Abstract:Fabrication of a visible-light driven photocatalyst is of great vital for the elimination of antibiotics and microorganism in the wastewater and the construction of sustainable green energy systems. In this work, carbon quantum dots (C-dots) were integrated with Cu2O/SrTiO3 p-n heterojunction to optimize the photocatalytic activity. The excellent photocatalytic degradation efficiency of chlortetracycline hydrochloride (CTC·HCl) (92.6% within 90 min) and E. coli inactivation efficiency were observed over C-dots/Cu2O/SrTiO3 under visible light irradiation. It is the synergistic effect of p-n heterojunction and modification of C-dots that facilitates the separation and transfer of electron-holes. Meanwhile, the modification of C-dots improves the harvesting of long wavelength solar light of photocatalysts due to its unique up-conversion photoluminescence (UCPL) characteristics. Eventually, the possible photocatalytic degradation path of the catalyst was inferred by LC-MS spectra, and the degradation mechanism was analyzed. This study sheds light on new possibilities for the application of photocatalysts in various light sources and has broad application prospects in water treatment.

environmental sciences
CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline

Zicheng Huang,Jing Ni,Ning Ding,Hong Liu

DOI: https://doi.org/10.1007/s11356-023-31801-0

IF: 5.8

2024-01-07

Environmental Science and Pollution Research

Abstract:CuS/Bi 2 O 3 composite photocatalyst was prepared by calcination and in situ precipitation, and peroxymonosulfate (PMS) was applied to the degradation of tetracycline (TC) wastewater under visible light. The microscopic morphology, chemical composition, and optical properties of the composites were investigated by characterization means of XRD, FTIR, SEM, XPS, and UV-Vis DRS. The results showed that the introduction of CuS increased the specific surface area of Bi 2 O 3 and increased the visible absorption boundary of Bi 2 O 3 from 455 to 524 nm, which effectively inhibited the complexation of photogenerated electron-hole pairs. The experimental results showed that the introduction of PMS strengthened the removal of TC from the composites, and 95% of TC could be removed under visible light irradiation, and the reaction rate was 8.22 times higher than that of the unspiked PMS, indicating that the BC-15+vis/PMS catalytic system could degrade the pollutants efficiently. The radical capture experiments showed that several radicals, including ·OH, SO 4 · − , ·O 2 − , h + , and 1 O 2 , were present in the catalytic system as the main active species to degrade TC, and the mechanism of photocatalytic activation of PMS by Z-type heterostructures of CuS/Bi 2 O 3 composites was proposed. The present study showed that BC-15 has excellent degradation performance and stability, which provides new ideas for the treatment of antibiotic wastewater.

environmental sciences
Exploration of Copper-Cysteamine Nanoparticles As a New Type of Agents for Antimicrobial Photodynamic Inactivation.

Liyi Huang,Lun Ma,Weijun Xuan,Xiumei Zhen,Han Zheng,Wei Chen,Michael R. Hamblin

DOI: https://doi.org/10.1166/jbn.2019.2829

2019-01-01

Journal of Biomedical Nanotechnology

Abstract:Copper-cysteamine (Cu-Cy) nanoparticles (NPs) are a new type of sensitizers that can be activated by UV light, X-rays, microwaves and ultrasound to produce reactive oxygen species for cancer treatment. Here, for the first time, we explored Cu-Cy NPs for bacteria inactivation by treating gram-positive bacteria (methicillin-resistant Staphylococcus aureus and Enterococcus faecalis) and gram-negative bacteria (Escherichia coli and Acinetobacter baumannii), respectively. The results show that Cu-Cy NPs are very effective in killing gram-positive bacteria but are quite limited in killing gram-negative bacteria yet. The major killing mechanism is cell damage by singlet oxygen and Cu-Cy NPs are potential agents for bacteria inactivation.
Electroacupuncture Accelerates Solid Gastric Emptying and Improves Dyspeptic Symptoms in Patients with Functional Dyspepsia

San-ping Xu,X. Hou,Hui Zha,Zhongchun Gao,Yongxue Zhang,Jiann-Hwa Chen

DOI: https://doi.org/10.1007/s10620-006-9412-x

2006-11-03

Digestive Diseases and Sciences

Abstract:

Vitamin A ester formed by rat intestinal sections from beta-carotene.

Nontoxic Carbon Quantum Dots/g-C N for Efficient Photocatalytic Inactivation of Staphylococcus aureus under Visible Light.

Cuprous Oxide–demethyleneberberine Nanospheres for Single Near-Infrared Light-Triggered Photoresponsive-Enhanced Enzymatic Synergistic Antibacterial Therapy

Nontoxic Carbon Quantum Dots/g-C 3 N 4 for Efficient Photocatalytic Inactivation of Staphylococcus aureus under Visible Light

Visible-light-activated antibacterial and antipollutant properties of biocompatible Cu-doped and Ag-decorated TiO2 nanoparticles

Unveiling the bacterial photoinactivation through cerium-gallium titanate nanotubes

Efficient Fabrication of Cu-Doped TiO2 Nanoparticles for Enhanced Visible Light Photocatalysis and Antimicrobial Efficacy

Visible Light-Driven Photocatalysis and Antibacterial Performance of a Cu-TiO 2 Nanocomposite

NIR-triggered photocatalytic and photothermal performance for sterilization based on copper sulfide nanoparticles anchored on Ti3C2T MXene

Synthesis of Mn and Se-Doping TiO2 Mesoporous Materials and Their Antibacterial Efficacy under Visible Light Irradiation

LED-driven sulfamethazine removal and bacterial disinfection by a novel photocatalytic textile impregnated with oxygen vacancy-rich BiO 2-x /g-C 3 N 4 hybrid

Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts

Self-redox reaction driven in situ formation of Cu2O/Ti3C2Tx nanosheets boost the photocatalytic eradication of multi-drug resistant bacteria from infected wound

Preparation of C@CuNi/TiO 2 with a local surface plasmon resonance for photocatalytic degradation of organic dyes and antibiotics under visible light irradiation

Photocatalytic Nanocomposite Based on Titanate Nanotubes Decorated with Plasmonic Nanoparticles for Enhanced Broad-Spectrum Antibacterial Activity

Enhanced activation of peroxymonosulfate by a floating Cu0-MoS2/C3N4 photocatalyst under visible-light assistance for tetracyclines degradation and Escherichia coli inactivation

The Enhanced Near-Infrared Photocatalytic and Photothermal Effects of MXene-based Heterojunction for Rapid Bacteria-Killing

Extensive solar light utilizing by ternary C-dots/Cu2O/SrTiO3: Highly enhanced photocatalytic degradation of antibiotics and inactivation of E. coli

CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline

Exploration of Copper-Cysteamine Nanoparticles As a New Type of Agents for Antimicrobial Photodynamic Inactivation.

Electroacupuncture Accelerates Solid Gastric Emptying and Improves Dyspeptic Symptoms in Patients with Functional Dyspepsia