Safety of FFR-based treatment strategies: the Munich experience

J. Rieber,P. Jung,T. Schiele,A. Koenig,Isabelle Erhard,Tobias Segmiller,S. Ebel,K. Theisen,U. Siebert,V. Klauss

DOI: https://doi.org/10.1007/s00392-002-1321-1

Zeitschrift für Kardiologie

Abstract:

What problem does this paper attempt to address?

A robust, highly reversible, mixed conducting sodium metal anode

Keshuang Cao,Qianli Ma,Frank Tietz,Ben Bin Xu,Mi Yan,Yinzhu Jiang

DOI: https://doi.org/10.1016/j.scib.2020.06.005

IF: 18.9

2021-01-01

Science Bulletin

Abstract:Sodium metal anode holds great promise in pursuing high-energy and sustainable rechargeable batteries, but severely suffers from fatal dendrite growth accompanied with huge volume change. Herein, a robust mixed conducting sodium metal anode is designed through incorporating NaSICON-type solid Na-ion conductor into bulk Na. A fast and continuous pathway for simultaneous transportation of electrons and Na+ is established throughout the composite anode. The intimate contact between Na-ion conducting phase and Na metallic phase constructs abundant two-phase boundaries for fast redox reactions. Further, the compact configuration of the composite anode substantially protects Na metal from being corroded by liquid organic electrolyte for the minimization of side reactions. Benefiting from the unique configuration, the composite anode shows highly reversible and durable Na plating/stripping behavior. The symmetric cells exhibit ultralong lifespan for over 700 h at 1 mA cm(-2) with a high capacity of 5 mAh cm(-2) and outstanding rate capability up to 8 mA cm(-2) in the carbonate electrolyte. Full cells with Na3V2(PO4)(3)/C cathode demonstrate impressive cycling stability (capacity decay of 0.012% per cycle) and low charge/discharge polarization as well. This work provides new insights into rational design and development of robust sodium metal anode through an architecture engineering strategy for advanced rechargeable sodium batteries. (C) 2020 Science China Press. Published by Elsevier B.V. and Science China Press. All rights reserved.
A Series of Hybrid Multifunctional Interfaces as Artificial SEI layer for Realizing Dendrite Free, and Long‐life Sodium Metal Anodes

Megala Moorthy,Brindha Moorthy,Bala Krishnan Ganesan,Aditi Saha,Seungju Yu,Do‐Hoon Kim,Seungbum Hong,Sangho Park,Kisuk Kang,Ranjith Thangavel,Yun‐Sung Lee

DOI: https://doi.org/10.1002/adfm.202300135

IF: 19

2023-06-17

Advanced Functional Materials

Abstract:Sodium metal (Na) anodes are considered the most promising anode for fabricating high‐energy‐density sodium batteries because of their high theoretical capacity and low electrochemical potential. Herein, a series of Na‐ion conductive alloy‐type protective interface is studied (Na‐In, Na‐Bi, Na‐Zn, Na‐Sn) formed by facile in situ strategy as an artificial solid electrolyte interphase layer (SEI) layer to address the issues in Na metal anode, high Na deposition capacity, and long cycle life. The current study opens a new insight for designing dendrite Na metal anode for next generation energy storage devices. Sodium metal (Na) anodes are considered the most promising anode for high‐energy‐density sodium batteries because of their high capacity and low electrochemical potential. However, Na metal anode undergoes uncontrolled Na dendrite growth, and unstable solid electrolyte interphase layer (SEI) formation during cycling, leading to poor coulombic efficiency, and shorter lifespan. Herein, a series of Na‐ion conductive alloy‐type protective interface (Na‐In, Na‐Bi, Na‐Zn, Na‐Sn) is studied as an artificial SEI layer to address the issues. The hybrid Na‐ion conducting SEI components over the Na‐alloy can facilitate uniform Na deposition by regulating Na‐ion flux with low overpotential. Furthermore, density functional study reveals that the lower surface energy of protective alloys relative to bare Na is the key factor for facilitating facile ion diffusion across the interface. Na metal with interface layer facilitates a highly reversible Na plating/stripping for ≈790 h, higher than pristine Na metal (100 h). The hybrid self‐regulating protective layers exhibit a high mechanical flexibility to promote dendrite free Na plating even at high current density (5 mA cm−2), high capacity (10 mAh cm−2), and good performance with Na3V2(PO4)3 cathode. The current study opens a new insight for designing dendrite Na metal anode for next generation energy storage devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Rooted Multifunctional Heterogeneous Interphase Layer Enabled by Surface‐Reconstruction for Highly Durable Sodium Metal Anodes

Liang Cao,Jia Guo,Yong Feng,Yue Li,Yawen Qiu,Wenxuan Zhu,Yajun Tan,Chencheng Sun,Xianhong Rui,Hongbo Geng

DOI: https://doi.org/10.1002/adfm.202313962

IF: 19

2024-01-09

Advanced Functional Materials

Abstract:A rooted multifunctional heterogeneous Solid Electrolyte Interphase layer is designed through a surface reconstruction approach for sodium metal anode (SMA). The prepared protective layer with synergistic effects, including large Young's modulus, high sodiophilicity, and rapid Na+ diffusion conduction can regulate the Na+ deposition behavior and strengthen the stability of the electrode, enabling dendrite‐free SMA and ultralong cycle lifespan of sodium metal batteries. Sodium plating–stripping with high reversibility is still an intractable challenge for sodium metal‐based batteries due to the fragile natural solid‐electrolyte interphase (SEI) film and severe Na dendrites growth. Herein, a surface reconstruction strategy is proposed and a rooted heterogeneous interlayer derived from in situ reactions between tin selenide and Na metal (abbr. Na/SnSe) is produced to regulate Na+ deposition behavior and impede dendrite growth. The high sodiophilic Na15Sn4 component demonstrates the robust combination and dendrite suppression capability, inhibiting fracture and delamination problems during volume variation. Meanwhile, the superionic Na2Se ingredient contributes to the optimized Na+ conduction efficiency and low nucleation overpotential, enabling uniform distribution of electrical fields and ultimately eliminating Na dendrites. Consequently, the reconfigured multifunctional Na/SnSe interphase realizes a long‐term lifespan over 2400 h at 0.5 mA cm−2/1 mAh cm−2 in symmetric cell with an extremely low voltage hysteresis. Moreover, the assembled Na/SnSe||NaNi1/3Fe1/3Mn1/3O2 pouch cell achieves exceptional cycling stability and capacity retention (90.4 mAh g−1 after 1800 cycles at a high current density of 2 A g−1), exploiting an avenue for designing durable SEI layer and high‐quality sodium metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Facile and Scalable Development of High-Performance Carbon-Free Tin-Based Anodes for Sodium-Ion Batteries.

Arpita Das,Pranay Gandharapu,H. Poswal,A. Mukhopadhyay,R. Tripathi,V. Srihari

DOI: https://doi.org/10.1021/acsami.3c07305

2023-07-28

Abstract:Tin (Sn)-based anodes for sodium (Na)-ion batteries possess higher Na-storage capacity and better safety aspects compared to hard carbon -based anodes but suffer from poor cyclic stability due to volume expansion/contraction and concomitant loss in mechanical integrity during sodiation/desodiation. To address this, the usage of nanoscaled electrode-active particles and nanoscaled-carbon-based buffers has been explored, but with compromises with the tap density, accrued irreversible surface reactions, overall capacity (for "inactive" carbon), and adoption of non-scalable/complex preparation routes. Against this backdrop, anode-active "layered" bismuth (Bi) has been incorporated with Sn via a facile-cum-scalable mechanical-milling approach, leading to individual electrode-active particles being composed of well-dispersed Sn and Bi phases. The optimized carbon-free Sn-Bi compositions, benefiting from the combined effects of "buffering" action and faster Na transport of Bi, to go with the greater Na-storage capacity and lower operating potential of Sn, exhibit excellent cyclic stability (viz., ∼83-92% capacity retention after 200 cycles at 1C) and rate capability (viz., no capacity drop from C/5 to 2C, with only ∼25% drop at 5C), despite having fairly coarse particles (∼5-10 μm). As proven by operando synchrotron X-ray diffraction and stress measurements, the sequential sodiation/desodiation of the components and, concomitantly, stress build-ups at different potentials provide "buffering" action even for such "active-active" Sn-Bi compositions. Furthermore, the overall stress development upon sodiation of Bi has been found to be significantly lower than that of Sn (by a factor of ∼3.8), which renders Bi promising as a "buffer" material, in general. Dissemination of such complex interplay between electrode-active components during electrochemical cycling also paves the way for the development of high-performance, safe, and scalable "alloying-reaction"-based anode materials for Na-ion batteries and beyond, sans the need for ultrafine/nanoscaled electrode particles or "inactive" nanoscaled-carbon-based "buffer" materials.

Medicine,Materials Science,Engineering,Chemistry
Stabilize Sodium Metal Anode by Integrated Patterning of Laser‐Induced Graphene with Regulated Na Deposition Behavior

Hong Xiao,Yijuan Li,Weizhao Chen,Tangchao Xie,Hengji Zhu,Weitao Zheng,Jialang He,Shaoming Huang

DOI: https://doi.org/10.1002/smll.202303959

IF: 13.3

2023-07-28

Small

Abstract:A novel sodium metal anode host with sodiophilic Sn nanoparticles‐anchored laser‐induced graphene on copper foil is designed and fabricated by a facile and highly‐efficient laser‐induced technique, and the sodium deposition behavior in it is regulated and investigated by DFT calculations and in situ optical microscopy observation. Such an integrated patterning structure enables dendrite‐free Na deposition and outstanding electrochemical performances. Metallic sodium is regarded as the most potential anode for sodium‐ion batteries due to its high capacity and earth‐abundancy. Nevertheless, uncontrolled Na dendrite growth and infinite volume change remain great challenges for developing high‐performance sodium metal batteries. This work provides a simple and general approach to stabilize sodium metal anode (SMA) by constructing Sn nanoparticles‐anchored laser‐induced graphene on copper foil (Sn@LIG@Cu) consisting of Sn@LIG composite, polyimide (PI) columns, and Cu current collector. The Sn‐based sodiophilic species effectively reduce the Na nucleation overpotential and regulate the dendrite Na‐free deposition. While the flexible PI columns act as binder and buffer the volume variation of Na during cycling. Besides, the unique patterned structure provides continuous and rapid channels for ion transportation, promoting the Na+ transport kinetics. Therefore, the as‐fabricated Sn@LIG@Cu electrode exhibits outstanding rate performance to 40 mA cm−2 and excellent cycling stability without dendrite growth, which is confirmed by in‐situ optical microscopy observation. Moreover, the practical full cell based on such an anode displays a favorable rate capability of up to 10 C and cycling performance at 5 C for 600 cycles. This work thus demonstrates a facile, highly‐efficient, and scalable approach to stabilize SMAs and can be extended to other battery systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Nucleophilic Sn Seeding and Interface Engineering for Highly Stable Sodium Metal Batteries

Zeeshan Ali,Muhammad Burhan Shafqat,Muhammad Tayyab Ahsan,Shibo Li,Wanting Zhao,Yanglong Hou

DOI: https://doi.org/10.1002/smll.202406325

2024-01-01

Abstract:Sodium metal is a promising anode material for energy storage beyond lithium-ion batteries due to its abundance and low cost. However, the uncontrolled growth of dendrites and associated safety concerns have limited the practical application of sodium metal batteries (SMBs). By embedding nucleophilic tin seeds in a free-standing carbon film (FSF), here, an effective solution is developed to stabilize the sodium metal anode. The highly conductive and porous carbon matrix, intimately embedded with abundant Sn seeds (C@Sn), enables remarkably uniform sodium plating, and provides long-term stability for SMBs. Mechanistic studies confirm the formation of an Na─Sn alloy on interface which helps to lower the nucleation barrier for sodium plating. Hence, symmetric sodium cells equipped with C@Sn FSFs can sustain uninterrupted sodium plating and stripping for almost 2600 h at a high areal capacity of 4 mA h cm-2, achieving an average Coulombic efficiency (CE) of 99.88%. In addition, full cells prepared with commercial Na3V2(PO4)3 cathode and C@Sn-FSFs anode deliver remarkable cycling (90 mA h g-1 beyond 1300 cycles at 1C) and excellent rate performance. This ingenious strategy of embedding Sn particles within a carbon matrix offers an overall compelling solution to enhance the longevity of sodium anodes.
Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries

Sainan Mu,Qirong Liu,Pinit Kidkhunthod,Xiaolong Zhou,Wenlou Wang,Yongbing Tang

DOI: https://doi.org/10.1093/nsr/nwaa178

IF: 20.6

2020-08-25

National Science Review

Abstract:Abstract Sodium-based dual-ion batteries (Na-DIBs) show a promising potential for large-scale energy storage applications due to the merits of environmental friendliness and low cost. However, Na-DIBs are generally subject to poor rate capability and cycling stability for the lack of suitable anodes to accommodate large Na+ ions. Herein, we propose a molecular grafting strategy to in situ synthesize tin pyrophosphate nanodots implanted in N-doped carbon matrix (SnP2O7@N-C), which exhibits a high fraction of active SnP2O7 up to 95.6 wt% and a low content of N-doped carbon (4.4 wt%) as the conductive framework. As a result, this anode delivers a high specific capacity ∼400 mAh g−1 at 0.1 A g−1, excellent rate capability up to 5.0 A g−1 and excellent cycling stability with a capacity retention of 92% after 1200 cycles under a current density of 1.5 A g−1. Further, pairing this anode with an environmentally friendly KS6 graphite cathode yields a SnP2O7@N-C||KS6 Na-DIB, exhibiting an excellent rate capability up to 30 C, good fast-charge/slow-discharge performance and long-term cycling life with a capacity retention of ∼96% after 1000 cycles at 20 C. This study provides a feasible strategy to develop high-performance anodes with high-fraction active materials for Na-based energy storage applications.

multidisciplinary sciences
Interface Ionic/Electronic Redistribution Driven by Conversion‐Alloy Reaction for High‐Performance Solid‐State Sodium Batteries

Jiayu Chen,Sheng Feng,Hongjian Lai,Yan Lu,Wuhan Liu,Xiangwei Wu,Zhaoyin Wen

DOI: https://doi.org/10.1002/smtd.202301201

IF: 12.4

2024-01-03

Small Methods

Abstract:An ion/electron redistributed gradient sodiophilic and electronically insulating interphase are constructed on the surface of MNZSP electrolytes driven by the conversion‐alloy reaction of SnF2 interlayer with molten Na, which gives the NASICON electrolyte superior sodiophobicity and sodium dendrite suppression capability, thereby achieving uniform and dendrite‐free Na deposition during the cycling. NASICON‐type Na+ conductors show a great potential to realize high performance and safety for solid‐state sodium metal batteries (SSSMBs) owing to their superior ionic conductivity, high chemical stability, and low cost. However, the interfacial incompatibility and sodium dendrite hazards still hinder its applications. Herein, a conversion‐alloy reaction‐induced interface ionic/electronic redistribution strategy, constructing a gradient sodiophilic and electron‐blocking interphase consisting of sodium‐tin (Na‐Sn) alloy and sodium fluoride (NaF) between NASICON ceramic electrolyte and Na anode is proposed. The NaxSny alloy‐rich layer near the side of the sodium electrode acts as a superior conductor to enhance the anodic sodium‐ion transport dynamics while the NaF‐rich layer near the side of the ceramic electrolyte serves as an electron insulator to confine the interfacial electron turning ability, achieving uniform and dendrite‐free Na deposition during the cycling. Profiting from the synergistic effect of the gradient interphase, the critical current density (CCD) of the assembled Na symmetric cell is significantly increased to 1.7 mA cm−2 and the cycling stability of that is as high as 1200 h at 0.5 mA cm−2. Moreover, quasi‐solid‐state sodium batteries with both Na3V2(PO4)3 and NaNi1/3Fe1/3Mn1/3O2 cathode display outstanding electrochemical performance.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Sodiophilic Substrate Induces NaF‐Rich Solid Electrolyte Interface for Dendrite‐Free Sodium Metal Anode

Pei Liu,Licheng Miao,Zhiqin Sun,Xuchun Chen,Lifang Jiao

DOI: https://doi.org/10.1002/adma.202406058

IF: 29.4

2024-06-24

Advanced Materials

Abstract:Three‐dimensional (3D) substrate with abundant sodiophilic active sites holds promise for implementing dendrite‐free sodium metal anodes and high‐performance sodium batteries. However, the heightened electrode/electrolyte side reactions stemming from high specific surface area still hinder electrode structure stability and cycling reversibility, particularly under high current densities. Herein, we regulated the solid electrolyte interface (SEI) component and restrained detrimental side reactions through the uniform loading of Na‐Sn alloy onto a porous 3D nanofiber framework (NaSn‐PCNF). The strong interaction between Na‐Sn alloy and PF6− anions facilitates the dissociation of sodium salts and releases more free sodium ions for effective charge transfer. Simultaneously, the modulations of the interfacial electrolyte solvation structure and the construction of a high NaF content SEI layer stabilize the electrode/electrolyte interface. NaSn‐PCNF symmetrical battery demonstrates stable cycling for over 600 hours with an ultralow overpotential of 24.5 mV under harsh condition of 10 mA cm−2 and 10 mAh cm−2. Moreover, the full cells and pouch cells exhibit accelerated reaction kinetics and splendid capacity retention, providing valuable insights into the development of advanced Na substrates for high‐energy sodium metal batteries. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Conformal Sodium Deposition Facilitated by Ion Adsorption‐Intercalation Process within Hetero‐Interface for Stable Sodium Metal Batteries

Lei Wang,Jinghan Zuo,Zixuan Wang,Chunqiao Jin,Qian Chen,Zhilin Yang,Bixuan Li,Pengbo Zhai,Yongji Gong

DOI: https://doi.org/10.1002/aenm.202403258

IF: 27.8

2024-10-20

Advanced Energy Materials

Abstract:A novel adsorption‐intercalation mechanism is proposed to guide conformal sodium deposition within a sodiophilic interface for sodium metal batteries. Sodium ions first adsorb onto N‐atom hexagonal ring centers of the g‐C3N4 layer, and then intercalate into the hetero‐interface between g‐C3N4 and 3D‐C. The hetero‐interface construction strategy proposed in this work sparks new insights for designing high‐performance Na metal anodes. Sodium (Na) metal battery is regarded as one of the most promising candidates for large‐scale energy storage devices, benefiting from the abundant sodium reserves and low cost. However, its practical application is hindered by the dendrite growth and unstable electrode‐electrolyte interface. Herein, a 3D sodiophilic structure composed of a carbon matrix overlaid with g‐C3N4 coating layers (g‐C3N4/3D‐C) is designed to stabilize the Na plating/stripping behavior. The sodiophilicity is endowed by a highly reversible adsorption‐intercalation process at the hetero‐interface, which can guide conformal Na deposition and induce the formation of inorganic‐rich solid‐electrolyte interphases with high structural stability and fast Na‐ion transport. Meanwhile, the 3D scaffold can effectively accommodate Na deposition during Na plating/stripping and depress the dendrite formation. As a result, the half cell assembled with g‐C3N4/3D‐C electrode delivers long‐term cycling performance at 1.0 mA cm−2 with a high Coulombic efficiency of 99.92% for over 2000 cycles and of 99.94% even at 5 mA cm−2, 10 mAh cm−2. The practical feasibility of the g‐C3N4/3D‐C is verified with full cells, which shows favorable rate capability and long‐cycle performance. The sodiophilic hetero‐interface construction strategy proposed in this work sparks new insights for designing high‐performance Na metal anodes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Ion-conductive gradient sodiophilic 3D scaffold induced homogeneous sodium deposition for highly stable sodium metal batteries

Yanping Zhuang,Dongyuan Deng,Liang Lin,Ben Liu,Shasha Qu,Saichao Li,Yinggan Zhang,Baisheng Sa,Laisen Wang,Qiulong Wei,Liqiang Mai,Dong-Liang Peng,Qingshui Xie

DOI: https://doi.org/10.1016/j.nanoen.2022.107202

IF: 17.6

2022-06-01

Nano Energy

Abstract:Sodium (Na) metal is considered as an appealing anode material for high-energy density Na batteries owing to its low cost, low redox potential and high theoretical capacity. However, several issues triggered by the uncontrolled Na dendrites hinder the practical applications of Na metal anodes, such as the poor cycling reversibility, short lifespan and even the unexpected safety hazard. Herein, the gradient SnO2-modified 3D carbon nanofibers (SnO2-CNFs) scaffold is fabricated, in which, the in-situ formed sodiophilic Na-Sn alloys and Na2O during initial cycle can guide Na homogeneous deposition in a "bottom-up" mode. Moreover, Na2O with excellent ion-conductivity can decrease diffusion barrier to promote fast Na+ ion diffusion and uniform deposition into the scaffold. These features have positive effect on not only inhibiting dendrite growth but also improving space utilization of the 3D scaffold. As a result, the designed SnO2-CNFs electrode can maintain a high Coulombic efficiency (CE) of 99.88% after 1500 cycles (3000 h) at 3 mA cm−2 and 3 mAh cm−2. Besides, it can attain a CE of 99.68% after 400 cycles (800 h) when the current density and areal capacity increase to 5 mA cm−2 and 5 mAh cm−2. For the symmetric cell assembled by SnO2 electrodes, excellent cycling performance for 1500 h at 5 mA cm−2 and 5 mAh cm−2 is displayed. Moreover, the assembled full cell using Na3V2(PO4)3@ as cathode and SnO2 as anode exhibits an outstanding capacity retention of 95.1% after 400 cycles at a large current density of 5 C, evidencing the feasible application of the designed SnO2-CNFs scaffold to realize stable Na metal anodes for advanced Na metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Ultrahigh and Durable Volumetric Lithium/Sodium Storage Enabled by a Highly Dense Graphene-Encapsulated Nitrogen-Doped Carbon@Sn Compact Monolith.

Yunyong Li,Changzhi Ou,Junlu Zhu,Zhonggang Liu,Jianlin Yu,Wenwu Li,Haiyan Zhang,Qiaobao Zhang,Zaiping Guo

DOI: https://doi.org/10.1021/acs.nanolett.9b05349

IF: 10.8

2020-01-01

Nano Letters

Abstract:Tin-based composites hold promise as anodes for highcapacity lithium/sodium-ion batteries (LIBs/SIBs); however, it is necessary to use carbon coated nanosized tin to solve the issues related to large volume changes during electrochemical cycling, thus leading to the low volumetric capacity for tin-based composites due to their low packing density. Herein, we design a highly dense graphene-encapsulated nitrogen-doped carbon@Sn (HD N-C@Sn/G) compact monolith with Sn nanoparticles double-encapsulated by N-C and graphene, which exhibits a high density of 2.6 g cm(-3) and a high conductivity of 212 S-1. The as-obtained HD N-C@Sn/G monolith anode exhibits ultrahigh and durable volumetric lithium/sodium storage. Specifically, it delivers a high volumetric capacity of 2692 mAh cm(-3) after 100 cycles at 0.1 A g(-1) and an ultralong cycling stability exceeding 1500 cycles at 1.0 A g(-1) with only 0.019% capacity decay per cycle in lithium-ion batteries. Besides, in situ TEM and ex situ SEM have revealed that the unique double-encapsulated structure effectively mitigates drastic volume variation of the tin nanoparticles during electrode cycling. Furthermore, the full cell using HD N-C@Sn/G as an anode and LiCoO2 as a cathode displays a superior cycling stability. This work provides a new avenue and deep insight into the design of high-volumetric- capacity alloy-based anodes with ultralong cycle life.
Long Cycle Life and High‐Rate Sodium Metal Batteries Enabled by Regulating 3D Frameworks with Artificial Solid‐State Interphases

Xuejun Lai,Zhenming Xu,Xianfeng Yang,Qiongjie Ke,Qingshuai Xu,Zaisheng Wang,Yingying Lu,Yongcai Qiu

DOI: https://doi.org/10.1002/aenm.202103540

IF: 27.8

2022-01-22

Advanced Energy Materials

Abstract:The major challenge for sodium metal anodes is Na dendrite growth owing to the unstable and fragile solid–electrolyte interphase (SEI), leading to terrible cycle life and safety hazards. Constructing a robust SEI around a 3D porous host is considered to be a facile and efficient approach to stabilize Na metal anodes. Here, a durable 3D porous SnCl4@Na–rGO metal anode is fabricated by the in situ chemical reaction of SnCl4‐containing carbonate electrolyte with Na–rGO. Attributed to the robust SEI and the stereoscopic structure, the symmetric cells achieve a prolonged cycle life of 500 h without voltage fluctuation at 2 mA cm−2 and 2 mAh cm−2. Moreover, the Na3V2(PO4)3||SnCl4@Na–rGO full cell exhibits long‐term cycle stability (>600 cycles) and remarkable capacity retention (>92%). The novel approach provides an efficacious strategy for the practical implementation of Na metal batteries. A durable 3D porous SnCl4@Na–rGO anode is reported that is fabricated via an in situ chemical reaction. The anode possesses the merits of high Young's modulus, large specific surface area, and rapid Na ion diffusion kinetics. The electrochemical performance demonstrates that the anode can achieve long‐cycle life and high‐rate sodium metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
A High‐Performance Alloy‐Based Anode Enabled by Surface and Interface Engineering for Wide‐Temperature Sodium‐Ion Batteries

Jian Yang,Xin Guo,Hong Gao,Tianyi Wang,Zhigang Liu,Qing Yang,Hang Yao,Jiabao Li,Chengyin Wang,Guoxiu Wang

DOI: https://doi.org/10.1002/aenm.202300351

IF: 27.8

2023-06-23

Advanced Energy Materials

Abstract:A nitrogen‐doped carbon surface and a diglyme‐based electrolyte are designed to synergistically improve the electrochemical performance of alloy anode for all‐climate sodium‐ion batteries. The optimized single‐shelled [Na‐DEGDMEx]+ complexes co‐intercalation mechanism boosts reaction kinetics, and the formation of a thin, dense, and highly ionic conductive solid electrolyte inteface contributes to excellent long‐cycling performance. Alloy‐based anodes have shown great potential to be applied in sodium‐ion batteries (SIBs) due to their high theoretical capacities, suitable working potential, and abundant earth reserves. However, their practical applications are severely impeded by large volume expansion, unstable solid‐electrolyte interfaces (SEI), and sluggish reaction kinetics during cycling. Herein, a surface engineering of tin nanorods via N‐doped carbon layers (Sn@NC) and an interface engineering strategy to improve the electrochemical performance in SIBs are reported. In particular, the authors demonstrate that uniform surface modification can effectively facilitate electron and sodium transport kinetics, confine alloy pulverization, and simultaneously synergize interactions with the ether‐based electrolyte to form a robust organic‐inorganic SEI. Moreover, it is discovered that the diethylene glycol dimethyl ether electrolyte with strong stability and an optimized Na+ solvation structure can co‐embed the carbon layer to achieve fast reaction kinetics. Consequently, Sn@NC anodes deliver extra‐long cycling stability of more than 10 000 cycles. The full cell of Na3V2(PO4)3║Sn@NC exhibits high energy density (215 Wh kg−1), excellent high‐rate capability (reaches 80% capacity in 2 min), and long cycle life over a wide temperature range of −20 to 50 °C.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Amorphous phosphatized hybrid interfacial layer for dendrite-free sodium deposition

Yuanjun Zhang,Zhongyi Huang,Haoxuan Liu,Haifeng Chen,Yongya Wang,Kuan Wu,Guanyao Wang,Chao Wu

DOI: https://doi.org/10.1016/j.jpowsour.2023.233023

IF: 9.2

2023-06-01

Journal of Power Sources

Abstract:Sodium (Na) is a promising anode material for sodium ion batteries due to its high theoretical capacity and favorable redox voltage, but the dendrite growth issue limits its practical application. Herein, an artificial hybrid interface layer based on an amorphous phosphatized hybrid (a-Na3P/NaBr) is developed to facilitate a homogeneous and dendrite-free lateral growth behavior during recurring sodium plating/stripping processes. The proposed Na metal anode delivers an excellent cycling performance for over 200 cycles with an average Coulombic efficiency 99.5% under the capacity of 3 mAh cm−2. Besides, the symmetric cell also persists for over 2000 h under the same capacity. Notably, under the depth of discharge as high as 50%, the modified Na metal anode can still be stably cycled for nearly 350 h, showing much superior performance to the bare Na counterpart. Benefiting from these advantages, the full cell based on the Na anodes with this amorphous phosphatized hybrid interphase coating delivers a 98% capacity retention even after 1200 cycles. We believe that these findings will provide a promising avenue for the next-generation Na metal-based energy storage technologies.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Interfacial Protection Engineering of Sodium Nanoparticles toward Dendrite‐Free and Long‐Life Sodium Metal Battery

Shunzhang You,Minghui Ye,Jiaming Xiong,Zuyang Hu,Yufei Zhang,Yang Yang,Cheng Chao Li

DOI: https://doi.org/10.1002/smll.202102400

IF: 13.3

2021-07-26

Small

Abstract:The instability of interfacial solid-electrolyte interphase (SEI) layer of metallic sodium (Na) anode during cycles results in the rapid capacity decay of sodium metal batteries (SMBs). Herein, the concept of interfacial protection engineering of Na nanoparticles (Na-NPs) is proposed first to achieve stable, dendrite-free, and long-life SMB. Employing an ion-exchange strategy, conformal Sn-Na alloy-SEI on the interface of Na-NPs is constructed, forming Sn@Na-NPs. The stable alloy-based SEI layer possesses the following three advantages: 1) significantly enhancing the transport dynamics of Na+ ions and electrons; 2) enabling the well-distributed deposition of Na+ ions to avoid the growth of dendrites; and 3) protecting the Sn@Na-NPs anode from the attack of electrolyte, thereby reducing the parasitic reaction and boosting the Coulombic efficiency of SMBs. Because of these virtues, the symmetric Sn@Na-NPs cell shows an ultralow voltage hysteresis of 0.54 V at 10 mA cm−2 after 600 h. Paired with the Na3V2(PO4)2O2F (NaVPF) cathode, the NaVPF-Sn@Na-NPs full cell exhibits an initial discharge capacity of 89.2 mAh g−1 at 1 C and a high capacity retention of 81.6% after 600 cycles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Robust Artificial Interlayer with High Ionic Conductivity and Mechanical Strength toward Long‐Life Na‐Metal Batteries

Xianming Xia,Kaizhi Chen,Shitan Xu,Yu Yao,Lin Liu,Chen Xu,Xianhong Rui,Yan Yu

DOI: https://doi.org/10.1002/smsc.202300038

2023-06-07

Small Science

Abstract:Sodium metal, benefiting from its high theoretical capacity and natural abundance, is regarded as a promising anode for sodium‐metal batteries (SMBs). Unfortunately, the uncontrollable sodium dendrites formation caused from the sluggish ion‐transport kinetics and fragile solid electrolyte interphase (SEI) interlayer induces a low Coulombic efficiency and poor cycling stability. Constructing an artificial SEI interlayer with high ionic conductivity, stability, and mechanical toughness is an effective strategy for Na‐metal anode, yet it still presents major challenge for high current density and long cycling life. Herein, an artificial SEI interlayer composed of Na–Sn alloy, Sn, and Na2Te (denoted as NST) is designed via in‐situ conversion/alloying reaction of tin telluride (SnTe) with Na. Such artificial interlayer possesses rapid Na+‐transport kinetics and high Young's modulus (5.3 GPa), benefitting to even Na plating/stripping and suppressing Na dendrite growth. Owing to these merits, the symmetrical Na/NST cell presents an ultralong cycle life span over 1390 h with a small voltage hysteresis at 1 mA cm−2 with 1 mAh cm−2. And the Na3V2(PO4)3 (NVP)||Na/NST full cell exhibits a prolonged life of 1000 cycles with a high‐capacity retention of 88% at 5C. Herein, a promising strategy is provided to construct a high‐performance artificial interlayer for SMBs. An artificial solid electrolyte interphase layer composed of Na–Sn alloy, Sn, and Na2Te is designed to protect the Na anode via in situ conversion/alloying reactions. It presents rapid ionic conductivity, high Young's modulus, and structure stability, achieving homogeneous Na deposition with dendrite‐free morphology and ultralong life span over 1390 h at 1 mA cm−2/1 mAh cm−2.
Strain Retarding in Multilayered Hierarchical Sn‐Doped Sb Nanoarray for Durable Sodium Storage

Xinyan Li,Xin Zhang,Xiaobin Niu,Jing Zhang,Rui Wu,Jun Song Chen,Yan Yu

DOI: https://doi.org/10.1002/adfm.202300914

IF: 19

2023-05-07

Advanced Functional Materials

Abstract:Synthesis of pine tree‐like hierarchical multilayer triangular array by a template‐free electrodeposition method is exhibited. The bark‐like carbon coat armor, along with the pine tree‐like hierarchical multilayer stress‐release advantage, significantly dissipate the diffusion‐induced stress, eliminate volume fluctuation, promoting the structure integrity during cycling, thus exhibiting robust rate capability and cycling stability for sodium storage. Antimony (Sb) is a potential electrode material for sodium (Na) storage due to its high theoretical capacity of 660 mAh g−1. Yet, the alloy/dealloy reaction between Na and Sb induces detrimental structural strain that inevitably leads to electrode failure, further resulting in deteriorated rate performance and cycle life. Herein, inspired by the multilayered structure of the pine trees, 3D hierarchical multilayered tin (Sn)‐doped Sb nanoarray coated with a thin carbon (C) layer (Sb(Sn)@C) is developed. Density functional theory calculation results suggest that Sb(Sn)@C offers better kinetic properties for Na diffusion, and lower volume expansion upon sodium intercalation as compared to the counterparts without Sn dopant or carbon coating. Moreover, the simulation results based on finite element analysis suggest that the unique hierarchical multilayered construction not only provides highly efficient Na+ utilization, but also builds a uniform von Mises stress distribution that effectively confines structural strain induced during Na+ insertion. This is also verified by nanoindentation measurement that Sb(Sn)@C shows higher elastic modulus and hardness than Sb(Sn) and pure Sb, indicating best mechanical stability. As expected, Sb(Sn)@C achieves excellent electrochemical capability for sodium storage with high reversible capacity, enhanced cyclability, and remarkable rate performance.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
SnSb binary alloy induced heterogeneous nucleation within the confined nanospace: Toward dendrite-free, flexible and energy/power dense sodium metal batteries

Miao Bai,Keren Zhang,Dou Du,Xiaoyu Tang,Yujie Liu,Helin Wang,Min Zhang,Siyuan Liu,Yue Ma

DOI: https://doi.org/10.1016/j.ensm.2021.07.032

IF: 20.4

2021-11-01

Energy Storage Materials

Abstract:Rechargeable sodium (Na) metal batteries (SMBs) provide an alternative energy-dense, low-cost energy storage system beyond prevailing Li‐ion technologies. However, their practical deployment requires the performance evaluation of Na anodes on the device level and mitigation of safety hazards, i.e., mechanical stress, electrode pulverization and dynamic interfacial properties. Here, we propose a lightweight N-doped carbon nanofiber substrate with SnSb nanocrystallites monodispersed within the mesopores (). The alloying-induced Na15Sn4 and Na3Sb intermediates act as the heterogeneous sodiophilic "magnets" to homogenize Na ion flux and confine Na deposits within the nanospace. Additionally, the nucleation theory of metal solidification bridges the density functional theory calculations, elucidating the oriented Na propagation that maximizes the anode utilization. With the proper Na plating regulation, the substrate (pre-stored 1 × excess Na) integrates with the NaVPO4F cathode in 5 mA h single-layer pouch cell, the prototype of which exhibits the cycling endurance (96.3% capacity retention for 500 cycles) and high specific energy/power densities even upon the repetitive mechanical flexing scenarios. The nanoconfinement of the heterogeneous nucleation process affords a feasible approach to mitigate the dendrite formation upon the geometry deformation or high areal-capacity loading, which enlightens the further exploration of the energy-dense, mechanical flexible battery system.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Optimizing Na plating/stripping by a liquid sodiophilic Ga-Sn-In alloy towards dendrite-poor sodium metal anodes

Mengnuo Fu,Xilin Zhang,Wujie Dong,Bingchen Li,Ru-Ning Tian,Qi Guo,Jingjing Chen,Dajian Wang,Chenlong Dong,Zhiyong Mao

DOI: https://doi.org/10.1016/j.ensm.2023.103020

IF: 20.4

2023-10-12

Energy Storage Materials

Abstract:Benefited by the abundant Na resources and high theoretical capacity of Na, rechargeable sodium metal batteries exhibit great potentials for next-generation energy storage systems. However, there are several key puzzles of Na anodes restricting the wide application, including high activity of Na metal, uncontrollable dendrite growth and unstable solid-electrolyte interface (SEI). In this work, a liquid alloy comprised of Ga, Sn and In was uniformly coated on commercial Cu foil in order to regulate the Na plating/stripping behaviors and thereupon enable stable sodium metal battery. The liquid sodiophilic Ga-Sn-In alloy on Cu foil (GSIC) can enhance the wettability of electrolyte and melted Na and decrease the Na nucleation overpotential. Based on the results of ex situ SEM and in situ optical microscopy, the Ga-Sn-In alloy coating layer can induce the uniform Na plating and decrease the volume expansion, enabling dendrite-poor capability. By taking NVP as cathode and optimal Na-GSIC as Na anode, the sodium metal full battery manifests a high reversible capacity of 108.7 mAh g −1 at the 1 st cycles and offers 87.4 mAh g −1 (80.4% retention) at 5 C after 250 cycles. Such sodiophilic liquid alloy current collector would pave new pathway on designing feasible and highly stable Na metal anodes for sodium metal batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Safety of FFR-based treatment strategies: the Munich experience

A robust, highly reversible, mixed conducting sodium metal anode

A Series of Hybrid Multifunctional Interfaces as Artificial SEI layer for Realizing Dendrite Free, and Long‐life Sodium Metal Anodes

A Rooted Multifunctional Heterogeneous Interphase Layer Enabled by Surface‐Reconstruction for Highly Durable Sodium Metal Anodes

Facile and Scalable Development of High-Performance Carbon-Free Tin-Based Anodes for Sodium-Ion Batteries.

Stabilize Sodium Metal Anode by Integrated Patterning of Laser‐Induced Graphene with Regulated Na Deposition Behavior

Nucleophilic Sn Seeding and Interface Engineering for Highly Stable Sodium Metal Batteries

Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries

Interface Ionic/Electronic Redistribution Driven by Conversion‐Alloy Reaction for High‐Performance Solid‐State Sodium Batteries

Sodiophilic Substrate Induces NaF‐Rich Solid Electrolyte Interface for Dendrite‐Free Sodium Metal Anode

Conformal Sodium Deposition Facilitated by Ion Adsorption‐Intercalation Process within Hetero‐Interface for Stable Sodium Metal Batteries

Ion-conductive gradient sodiophilic 3D scaffold induced homogeneous sodium deposition for highly stable sodium metal batteries

Ultrahigh and Durable Volumetric Lithium/Sodium Storage Enabled by a Highly Dense Graphene-Encapsulated Nitrogen-Doped Carbon@Sn Compact Monolith.

Long Cycle Life and High‐Rate Sodium Metal Batteries Enabled by Regulating 3D Frameworks with Artificial Solid‐State Interphases

A High‐Performance Alloy‐Based Anode Enabled by Surface and Interface Engineering for Wide‐Temperature Sodium‐Ion Batteries

Amorphous phosphatized hybrid interfacial layer for dendrite-free sodium deposition

Interfacial Protection Engineering of Sodium Nanoparticles toward Dendrite‐Free and Long‐Life Sodium Metal Battery

Robust Artificial Interlayer with High Ionic Conductivity and Mechanical Strength toward Long‐Life Na‐Metal Batteries

Strain Retarding in Multilayered Hierarchical Sn‐Doped Sb Nanoarray for Durable Sodium Storage

SnSb binary alloy induced heterogeneous nucleation within the confined nanospace: Toward dendrite-free, flexible and energy/power dense sodium metal batteries

Optimizing Na plating/stripping by a liquid sodiophilic Ga-Sn-In alloy towards dendrite-poor sodium metal anodes