Abstract:A formulated photocurable poly(ethylene glycol) diacrylate (PEGDA) and 2‐hydroxylethyl methacrylate (HEMA) polymer matrix (PEGDA:HEMA) was developed for constructing an adsorptive 3D cubic monolith using masked stereolithography (MSLA) 3D‐printing technique. A pure PEGDA formulation served as a control in comparative studies. Additionally, two structural designs (solid cube and cubic lattice) were also quantitatively compared to determine the adsorption performance for Rhodamine B (RhB) dye removal. Results indicated that the cubic lattice formulated with hydrophilic PEGDA:HEMA (θ~47.20°) was more effective at removing RhB dye. Additionally, the preliminary study identified pH 9 as the optimal level for RhB dye removal using 3D cubic monolith for both formulations. A Taguchi orthogonal array of L9 (3 3 ) was used to concurrently vary three parameters: adsorbent dosage (0.65 ± 0.02 g per cubic lattice), operating temperature (30°C, 40°C, and 50°C), and initial RhB concentration (20, 60, and 100 ppm). The highest mean of the signal‐to‐noise (S/N) ratio was chosen to obtain the highest adsorption performance. The removal efficiency (R%) of RhB dye ranged from 44.48% to 94.86%, and the adsorption capacity (K) ranged from 0.59 to 3.73 (mg/g) after 5 h. Seven adsorption isotherms and five adsorption kinetics modelling were performed. Adsorption isotherm data fitted well with the Redlich–Peterson model for both linear (R 2 = 0.998) and nonlinear (R 2 = 1). Besides that, the pseudo‐second‐order model (PSO) accurately described adsorption kinetics (R 2 = 0.995). The separation factor (R L ) confirmed favourable adsorption (0 < R L < 1). Thermodynamic parameters indicated that the adsorption process was endothermic and at higher temperatures, entropy increased. Also, the 3D–printed PEGDA:HEMA cubic lattice exhibited good mechanical stability. Furthermore, the 3D PEGA: HEMA lattice has the ability to be used in several adsorption cycles of degrading RhB dye. Ultimately, the present work demonstrates the viability of 3D printing photocurable PEGDA:HEMA resin and utilizes statistical tools to optimize process parameters, enhancing predictability for wastewater management.

Efficient adsorption of rhodamine B using synthesized Mg-Al hydrotalcite/ sodium carboxymethylcellulose/ sodium alginate hydrogel spheres: Performance and mechanistic analysis

Preparation of KHA/SA/MMT composites and their adsorption properties for Rhodamine B

Adsorption of Rhodamine B in Aqueous Solution by Mg/CS Composite Modified Attapulgite

Sodium alginate-encapsulated nano-iron oxide coupled with copper-based MOFs (Cu-BTC@Alg/Fe3O4): Versatile composites for eco-friendly and effective elimination of Rhodamine B dye in wastewater purification

Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability

Bentonite/Sesbania Gum Hydrogel for Effective Removal of Cationic Dyes: Network Structure Construction and the Role of Multiple Hydroxyl and Carboxyl Adsorption Sites

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

Multifunctional poly-(Acrylamide-acrylic acid)/sesbania gum/bentonite hydrogel composite for removal of methylene blue and malachite green dyes from water

Highly efficient removal of adsorbed cationic dyes by dual-network chitosan-based hydrogel

Facile Fabrication of Embedded g-C3N4/MoS2 Nano-Adsorbent for Removal of Persistent Rhodamine B Contaminant in Aqueous Solution

Novel synthesis and characterization of magnesium-doped CoFe 2 O 4 nanoparticles –SiO 2 –3-aminopropylethoxysilane– gallic acid magnetic nanocomposite for effective removal of cationic dyes

Surfactant-modified three-dimensional layered double hydroxide for the removal of methyl orange and rhodamine B: Extended investigations in binary dye systems

Removal of Various Cationic Dyes from Aqueous Solutions Using a Kind of Fully Biodegradable Magnetic Composite Microsphere

β-cyclodextrin and magnetic graphene oxide modified porous composite hydrogel as a superabsorbent for adsorption cationic dyes: Adsorption performance, adsorption mechanism and hydrogel column process investigates

3D Printing and Optimization of Biocompatible and Hydrophilic PEGDA‐HEMA Lattice for Enhanced RhB Dye Removal From Aqueous Solution

Synthesis of Sodium Carboxymethyl Cellulose/Poly(acrylic acid) Microgels via Visible-Light-Triggered Polymerization as a Self-Sedimentary Cationic Basic Dye Adsorbent

Selective biosorption mechanism of methylene blue by a novel and reusable sugar beet pulp cellulose/sodium alginate/iron hydroxide composite hydrogel

Efficient removal of direct dyes by SA-Er biopolymer gel spheres: Equilibrium isotherms, kinetics and regeneration performance study

Agarose‐sodium alginate hydrogel beads enhanced with zeolitic imidazolate frameworks/multiwalled carbon nanotubes nanoparticles for efficient adsorption and selective separation of methylene blue

Synthesis, Characterization, and Modification of Alumina Nanoparticles for Cationic Dye Removal

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent