Endocrine Physiology of Electrolyte Metabolism

K. Dawson

DOI: https://doi.org/10.2165/00003495-198400281-00011

1984-10-01

Drugs

Abstract:

What problem does this paper attempt to address?

Intelligent shielding material based on VO 2 with tunable near-field and far-field electromagnetic response

Si-Yuan Liao,Xiao-Yun Wang,Hai-Peng Huang,Yu-Ying Shi,Qiao-Feng Wang,You-Gen Hu,Peng-Li Zhu,Rong Sun,Ching-Ping Wong,Yan-Jun Wan

DOI: https://doi.org/10.1016/j.cej.2023.142596

IF: 15.1

2023-04-07

Chemical Engineering Journal

Abstract:Intelligent electromagnetic interference (EMI) shielding materials, which can generate reversible and real-time EM responses to external stimuli, have an attractive prospect in smart wearable electronics. Herein, we design and fabricate flexible and intelligent vanadium dioxide (VO 2 )/cellulose nanofiber (CNF) shielding composites, showing a controllable EM response based on the reversible metal-to-insulator transition characteristic of VO 2 by thermal stimuli. With the phase transition of VO 2 between the insulating M phase and metallic R phase at ∼68 °C, the electrical conductivity of VO 2 /CNF composites is reversibly changed between ∼0.3 and ∼446.5 S/m, leading to a tunable shielding effectiveness (SE) between ∼18.7 and ∼52.8 dB in the frequency of 8.2–12.4 GHz. The lattice strain of VO 2 driven by thermal stimuli radically changes the EM parameters and impedance matching of VO 2 /CNF composites, which dominates the attenuation mechanism of EM waves. Uniquely, we demonstrate the VO 2 /CNF composites with a proof of concept to reversibly control the on and off of the wireless transmission. Moreover, the VO 2 /CNF composites exhibit an outstanding near-field shielding performance, which is potential to be applied in the electronic packaging field. This intelligent EMI shielding material has a broad prospect in the smart EM devices of next generation.

engineering, chemical, environmental
Intelligent Off/On switchable electromagnetic wave absorbing material based on VO 2 nanowires

Shuhui Liang,Huan Guan,Hainan Zhang,Xiangge Han,Jia Gao,Jiupeng Zhao,Shuliang Dou,Yao Li

DOI: https://doi.org/10.1016/j.cej.2024.151025

IF: 15.1

2024-04-18

Chemical Engineering Journal

Abstract:With the development of modern communication devices, the demand for intelligent electromagnetic wave (EMW) absorbing materials that dynamically respond to environmental changes is ever-growing. However, the design and fabrication of high-performance EMW absorbing materials with adapt features remains challenging. Here, we report a temperature-responsive composite comprising VO 2 nanowires (NWs) and polyvinylidene fluoride-hexafluoropropylene copolymer (PVDF-HFP). Benefiting from the phase transition characteristics of VO 2 and the high aspect ratio of NWs, the composite demonstrates two distinct off/on switchable EMW absorbing performances as the temperature increases at low filler loading of VO 2 . The composite with 10 wt% VO 2 NWs transitions from transmission to absorption, showcasing a maximum change in reflection loss (RL) and effective absorption bandwidth (EAB) values of 53.09 dB and 4.85 GHz at the thin thickness of 2.5 mm and 2 mm, respectively. While the composite with 30 wt% VO 2 NWs shows a switch from absorption to reflection with the highest ΔEAB and ΔRL values of 3.59 GHz (1.5 mm) and 44.29 dB (2.5 mm), respectively. Additionally, radar cross-sectional (RCS) simulations verify the intelligent EMW absorbing performance of the composite. The work provides an effective and sustainable approach to harness the potential of VO 2 for developing tunable and high-performance wave-absorbing materials.

engineering, chemical, environmental
Tunable High-Performance Electromagnetic Interference Shielding of VO 2 Nanowires-Based Composite

Shuhui Liang,Huan Guan,Hainan Zhang,Xiangge Han,Jiupeng Zhao,Shuliang Dou,Sue Hao,Haoxin Zhou,Chenchen Geng,Tao Zhao,Jinxin Gu,Hang Wei,Yao Li

DOI: https://doi.org/10.1021/acsami.3c19326

IF: 9.5

2024-04-13

ACS Applied Materials & Interfaces

Abstract:The unique metal-insulator transition of VO(2) is very suitable for dynamic electromagnetic (EM) regulation materials due to its sharp change in electrical conductivity. Here, we have developed an off/on switchable electromagnetic interference (EMI) shielding composite by interconnecting VO(2) nanowires (NWs) in poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) to form conductive networks, resulting in outstanding performance at the X and Ku bands with maximum change values of 44.8 and...

materials science, multidisciplinary,nanoscience & nanotechnology
Intelligent Off/On Switchable Microwave Absorption Performance of Reduced Graphene Oxide/VO2 Composite Aerogel

Zheng Cheng,Ruofeng Wang,Yishu Cao,Zhihao Cai,Zhiwei Zhang,Yi Huang

DOI: https://doi.org/10.1002/adfm.202205160

IF: 19

2022-07-26

Advanced Functional Materials

Abstract:The graphene/VO2 composite aerogel displays real‐time off/on switchable microwave absorption performance, which is induced by the phase change behavior of VO2. The maximum changes for the effective absorption bands (ΔEAB) and RL values (ΔRL) can be as high as 7.27 GHz and 49 dB. Intelligent microwave absorption (MA) materials possess the ability to dynamically change their microwave absorption performance, according to real‐time requirements, and it is of great significance in future civil and military fields. For the first time, the reduced graphene oxide/VO2 composite aerogels are developed with off/on switchable MA performance, and the switchable mechanism is originated from the unique phase change behavior of VO2. As temperature increases (>68 °C), the VO2 displays the phase change from monoclinic to rutile phase, which accompanies with significant changes in aerogel's electrical conductivity as well as its permittivity, and consequently leads to off/on switchable MA performance. Particularly, two different off/on switch modes, "on to off" and "off to on", can be separately realized by different composite aerogels as temperature increases, and this off/on switchable MA performance is also confirmed with good cycling stability. More importantly, during the off/on switch process, the maximum changes for the effective absorption bands (ΔEAB) and RL values (ΔRL) can be as high as 7.27 GHz and 49 dB, which exceeds most current reports. Besides, the RCS simulations on aircrafts have been performed and verified this intelligent MA performance, thus providing useful guidance for next‐generation smart electromagnetic devices in various fields.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Lightweight Microwire/graphene/silicone Rubber Composites for Efficient Electromagnetic Interference Shielding and Low Microwave Reflectivity

Y. L. Xu,A. Uddin,D. Estevez,Y. Luo,H. X. Peng,F. X. Qin

DOI: https://doi.org/10.1016/j.compscitech.2020.108022

IF: 9.1

2020-01-01

Composites Science and Technology

Abstract:Most traditional fillers used in electromagnetic shielding composites require high loading, uniform distribution and complicated structures for modest property enhancement. Here, we propose a simple shielding system incorporating magnetic microwires M and graphene fibers G in different arrangements. Integrating both fillers in the composite resulted in superior shielding effectiveness (SE) with respect to incorporating either individual type of filler, due to improved absorption efficiency, impedance matching and polarization triggered by different arrangements of the fillers. Randomly dispersed arrays provided a maximum shielding of 6 dB for equal amount of G and M, in which polarization effects at the interface between the two regions contributed to the SE value. The highest SE of 18 dB (98.4% attenuation) was reached by the MMMGGG periodic arrays with merely 0.059 wt % filler loading enabled by the optimized arrangement and wave attenuation from the microwires dielectric/magnetic response. The normalized SE of this composite was about two to four orders of magnitude higher than that of many other shielding candidate materials. High SE, low loading, simple structure, and multifunctionality make these composites attractive for several applications. Moreover, tailoring topological and structural factors of both fillers would facilitate further SE enhancement without sacrificing the important lightweight advantage.
Ultrathin Carbon Foams for Effective Electromagnetic Interference Shielding

Yang Li,Bin Shen,Xueliang Pei,Yonggang Zhang,Da Yi,Wentao Zhai,Lihua Zhang,Xingchang Wei,Wenge Zheng

DOI: https://doi.org/10.1016/j.carbon.2016.01.030

IF: 10.9

2016-01-01

Carbon

Abstract:Ultrathin carbon foams with the thickness about 24 mm were fabricated by the pyrolysis of polyimide/graphene composite foams. The addition of graphene was verified to stabilize the porous structure of the foams and accelerate their graphitization process simultaneously. Consequently, the well-defined carbon foams exhibited much higher electromagnetic interference (EMI) shielding effectiveness (SE) up to 24 dB over the frequency range of 8-12 GHz, in comparison with the non-foamed counterparts. The possible mechanism behind the phenomenon was attributed to their enhanced microwave absorption via the internal multiple scattering and reflections. Moreover, the SE could be further improved to 43 and 51 dB by increasing the sample thickness gradually to 51 and 73 mm, respectively. The carbon foams with high thermal stability are very promising in the fabrication of ultrathin EMI shields for thermally harsh applications. (C) 2016 Elsevier Ltd. All rights reserved.
Synthesis and mechanism investigation of wide-bandwidth Ni@MnO2 NS foam microwave absorbent

Weidong Zhang,Yuan Zheng,Xue Zhang,Qing Zhu,Hongxia Yan,Leonarda Francesca Liotta,Hongjing Wu,Shuhua Qi

DOI: https://doi.org/10.1016/j.jallcom.2019.04.093

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:Lightweight and easily available foams used for microwave absorption are hotspots for preventing electromagnetic (EM) pollution. In this paper, we focused on a novel kind of Ni-based foam that modified by MnO2 nanosheets (denote as Ni@MnO2 NS foam) was synthesized by a facile hydrothermal reaction, then analyzed by XRD, XPS and SEM characterization techniques. The Ni@MnO2 NS foam possess excellent microwave absorption performance (MAP). In details, the superb reflection loss (RL) was up to -37.55 dB with the coating thickness of 3.6 mm and ultra-wide effective absorption (RL < - 10 dB), suggesting 90% EM wave were attenuated, which could reach 11.2 GHz (from 6.8 GHz to 18 GHz). Meanwhile, the EM wave attenuation mechanism was discussed and it was proposed that the prominent MAP could be responsible for magnetic loss (natural resonance of Ni frameworks) and dielectric loss (interface polarization and dipole polarization). Ni@MnO2 NS foam is a multifunction material that not only can be used in controlling EM pollution but also has potential application in other fields. (C) 2019 Elsevier B.V. All rights reserved.
Integration of efficient microwave absorption and shielding in a multistage composite foam with progressive conductivity modular design

Yadong Xu,Zhiqiang Lin,Yaqi Yang,Hongji Duan,Guizhe Zhao,Yaqing Liu,Yougen Hu,Rong Sun,Ching-Ping Wong

DOI: https://doi.org/10.1039/d1mh01346g

IF: 13.3

2022-01-01

Materials Horizons

Abstract:The effective microwave absorber and highly efficient EMI shield can be integrated in one multistage composite foam through a progressive conductive modular design which enables the arbitrary regulation of EM wave reflection and absorption.

materials science, multidisciplinary,chemistry
Heterogeneous silicon rubber composite foam with gradient porous structure for highly absorbed ultra-efficient electromagnetic interference shielding

Jianming Yang,Xia Liao,Gui Wang,Jia Chen,Pengwei Song,Wanyu Tang,Fumin Guo,Feng Liu,Guangxian Li

DOI: https://doi.org/10.1016/j.compscitech.2021.108663

IF: 9.1

2021-04-01

Composites Science and Technology

Abstract:Heterogeneous silicone rubber (VMQ)/silver plated glass fiber ()/multiwalled carbon nanotubes (MWCNT)/ferroferric oxide (Fe3O4) composite foams with gradient porous structure were fabricated through layer by layer combination and supercritical carbon dioxide (scCO2) foaming. The average electromagnetic interference shielding effectiveness (EMI SE) and absorption coefficient (A) of the composite foam are as high as 78.6 dB and 0.82 respectively, because of the reasonable progressive dissipation mechanism. The resonance cancellation caused by the encounter of incident and reflected electromagnetic (EM) waves further improved the microwave absorbing performance of the foam, and an absorption ratio of up to 94% can be obtained at 7.68 GHz. Moreover, the composite foam exhibits excellent stability of EMI shielding performance under multiple bending. This composite foam has great application prospects in the field of EM protection of wearable flexible electronics, high-power instruments and the forthcoming 5th-Generation communication products.

materials science, composites
Integrated Electromagnetic Device with On‐Off Heterointerface for Intelligent Switching Between Wave‐Absorption and Wave‐Transmission

Fei Pan,Ke Pei,Gang Chen,Hongtao Guo,Haojie Jiang,Renchao Che,Wei Lu

DOI: https://doi.org/10.1002/adfm.202306599

IF: 19

2023-07-21

Advanced Functional Materials

Abstract:Integrated electromagnetic device with on‐off heterointerface for intelligent switching between wave‐absorption and wave‐transmission. Schematic diagram of on‐off heterostructure mechanism for intelligent switching between wave‐absorption and wave‐transmission, showing the "quantized" dielectric loss. Intelligent electromagnetic wave absorbers (IEAs) are in high demand due to their dynamic electromagnetic parameters that can adapt to the complex and volatile application environments of the current 5G era. Despite of this, there is currently a lack of research on the convertible electromagnetic wave (EMW) absorption mode (switching between wave‐absorption and wave‐transmission) and their integrated design with external physical stimulations, so that the electromagnetic device will realize intelligent switching in any conditions. In this work, a V2C‐VO2(M) heterostructure that exhibits a reversible metal–insulator transition at the temperature of 62 °C is fabricated via oxidation of MXene. The heterostructures demonstrate near wave‐transmission characteristics at 25 °C while wave‐absorption behavior with wide effective absorption bandwidth (4.04 GHz) at 70 °C. VO2(M) exhibits stronger intrinsic conductivity after phase transition, and the "on‐off" heterostructure between V2C and VO2 lead to poor/strong local conductive network and interfacial polarization in 25/70 °C, thus creating "quantized" dielectric loss. Furthermore, a multilayered electromagnetic functional device is developed to facilitate the absorber's phase transition temperature at a voltage of 17.5 V. This work presents promising opportunities of the V2C‐VO2(M) heterostructure for various applications, including radar stealth, portable stealth suits, signal regulation, and deicing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Heterostructured composite foam with highly efficient absorption-dominant EMI shielding capability and mechanical robustness

Zhu Wang,Shuaibing Wang,Kailiang Zhang,Zhenxiang Shen,Enze Yu,Si Yu Zheng,Shanqiu Liu,Jintao Yang

DOI: https://doi.org/10.1016/j.coco.2023.101603

IF: 8

2023-05-06

Composites Communications

Abstract:Highly efficient electromagnetic interference (EMI) shielding materials with strong electromagnetic (EM) waves absorption capability have attracted great interest in both academia and industry. Here, a robust heterostructured composite foam, which features both excellent EMI shielding performance and ultra-high EM waves absorption ability, is designed and fabricated, by combing an EM wave-absorbing aerogel layer with an EM wave-reflecting layer of highly conductive segregated structure. The designed heterostructure endows the composite foam with a strong interfacial dielectric loss as well as a unique "absorption-reflection-reabsorption" process towards the incident EM waves, resulting in remarkable EM waves absorption capability with a power coefficient of reflectivity as low as 0.16 and a high EMI SE. Furthermore, the engineered composite foam demonstrates desirable flexibility and superior robustness towards mechanical damages. This work provides a simple and effective strategy for the preparation of ultra-robust, highly efficient, and absorption-dominated EMI shielding materials.

materials science, composites
Multifunctional heterostructured composite foam with tunable electromagnetic interference shielding

Shuaibing Wang,Zhu Wang,Si Yu Zheng,Jintao Yang

DOI: https://doi.org/10.1016/j.compscitech.2024.110482

IF: 9.1

2024-02-05

Composites Science and Technology

Abstract:Multifunctional composite materials with adjustable electromagnetic interference (EMI) shielding properties hold significant promise in the emerging field of combating electromagnetic radiation pollution. Herein, we construct a heterostructured composite foam with tunable EMI shielding performance by adjusting the thickness and spatial distribution of Ag conductive network in the porous sponge, coupled with the incorporation of CNTs/WPU aerogel. The remarkable conductivity of 3D Ag network within the composite foam enables it possesses excellent shielding performance at X-band (47.1 dB), fast sensing response time (∼0.2 s), and high temperature of 101.8 °C through efficient joule heating even at a low voltage of 3 V. Importantly, controllable tuning of EMI shielding effectiveness (from 25.0 to 40.1 dB), are successfully achieved by changing the position of the Ag layer or compression strain of the composite foam. These achievements underscore the substantial potential of this material for creating electromagnetic shielding solutions with adaptable characteristics.

materials science, composites
Conductive MXene/melamine sponge combined with 3D printing resin base prepared as an electromagnetic interferences shielding switch

Wenjing Yuan,Haitao Liu,Xihua Wang,Li Huang,Fuxing Yin,Ye Yuan

DOI: https://doi.org/10.1016/j.compositesa.2020.106238

2021-04-01

Abstract:With the rapid development of wireless communication and electronic devices, current electromagnetic interference (EMI) shielding materials cannot meet the demands of smart EMI shielding in the next generation of electronic equipment. Herein, we developed an intelligent EMI shielding switch to realize microwave shielding and transmitting functions for one material simultaneously. The EMI shielding switch is composed of MXene/melamine sponge, and 3D printed resin base. The EMI shielding switch can smartly regulate its absorption-dominant EMI SE from ∼0 dB to ∼43.1 dB in S-band through simply operation, to fully realize microwave transmitting and shielding functions simultaneously. The EMI shielding switch provides a novel way to fabricate efficient EMI shielding materials for actual wireless communication demands.
Controllable Proton-Reservoir Ordered Gel towards Reversible Switching and Reliable Electromagnetic Interference Shielding

Yan-Qin Wang,Min Cao,Bo-Wen Liu,Fu-Rong Zeng,Qiang Fu,Hai-Bo Zhao,Yu-Zhong Wang

DOI: https://doi.org/10.1039/d3mh01795h

IF: 13.3

2023-12-14

Materials Horizons

Abstract:Smart and dynamic electromagnetic interference (EMI) shielding materials possess the remarkable capacity to modify their EMI shielding abilities in real-time, rendering them invaluable in various civil and military applications. However, the present response mechanism of switch-type EMI shielding materials is somewhat restricted, as it primarily depends on continuous pressure induction, thereby resulting in concerns regarding their durability and reliability. Herein, for the first time, we demonstrate a novel way of achieving solvent-responsive, reversible switching, and robust EMI shielding capabilities using a controlled proton-reservoir ordered gel. The gel contains polyaniline and sodium alginate molecular chains that respond to diverse polar solvents such as water, acetonitrile, ethanol, n-hexane, and air by inducing distinct conformations. This impacts the degree of polyaniline conjugation and electron migration along the chain. The process is reversible and non-destructive to the polymer chain, which ensures that the EMI shielding switch works effectively and without any compromise in performance. We can achieve precise and reversible tuning (on/off) of EMI shielding with different effectiveness by manipulating solvents within the framework. This work opens up a new solvent-stimuli avenue for the development of EMI shielding materials with reliable and intelligent on/off switching capabilities.

materials science, multidisciplinary,chemistry
Tuning of anisotropic electrical conductivity and enhancement of EMI shielding of polymer composite foam via CO2-assisted delamination and orientation of MXene

Ruosong Li,Li Ding,Qiang Gao,Hongming Zhang,Dan Zeng,Biao Zhao,Bingbing Fan,Rui Zhang

DOI: https://doi.org/10.1016/j.cej.2021.128930

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Integration of a foam structure into a shielding material not only reduces its mass density but also enhances its electromagnetic interference (EMI) shielding performance. In this study, poly(vinylidene fluoride) (PVDF) composite films and foams consisting of carbon nanotubes (CNTs) and bulk Ti3C2Tx MXenes were fabricated. Prominent anisotropy with high in-plane electrical conductivity (sigma(parallel to)) and low through-plane electrical conductivity (sigma(perpendicular to)) was achieved (e.g., sigma(parallel to )= 17.02 S/m and sigma(perpendicular to) = 0.42 S/m with 1 wt% MXenes) in the composite films due to the aligned structure of the MXenes in the PVDF matrix. With CO2-assisted foaming, the intercalation of PVDF chains and cell-induced biaxial stretch facilitated reorganized orientation and delamination of the MXenes. Consequently, sigma(parallel to) decreased and sigma(perpendicular to) increased, and exhibiting an isotropic feature. Furthermore, the integration of the foam structure resulted in an increased sigma(perpendicular to), which improved the EMI shielding effectiveness (EMI SE) to 65.1 dB at a MXene content of 12 wt%, owing to enhanced multi-reflections, dielectric loss and conduction loss. Moreover, the shielding effectiveness coming from reflection was reduced to lower than 3 dB due to the decrease in sigma(parallel to) and destructive interference in the composite foam, thus leading to an absorption-dominated mechanism. Additionally, the prepared composite foams exhibited outstanding thermal conductivity and mechanical strength, enabling them to be used as lightweight and robust EMI shielding materials that could transform EM wave energy into Joule heat.
MXene/Ag@ZnO/WPU/Melamine gradient composite foams prepared by a unidirectional evaporation approach for absorption-dominated electromagnetic interference shielding

Tongcheng Zuo,Wei Wang,Dan Yu

DOI: https://doi.org/10.1016/j.jallcom.2023.171644

IF: 6.2

2023-08-06

Journal of Alloys and Compounds

Abstract:Gradient electromagnetic interference (EMI) shielding materials with absorption-dominated characteristics are promising but always have problems like complicated steps or harsh operation conditions. Herein, we propose a gradient EMI composite foam of MXene//WPU/Melamine fabricated through a simple unidirectional evaporation in combination with a vacuum-drying method. Benefiting from it, the conductivity of the material decreases from the top and bottom to the middle. The top with good impedance matching, which allows electromagnetic waves to enter the material, and the bottom with an efficient conductive network, which ensures an excellent EMI SE of the composite foam, could be balanced owing to the difference in the dispersibility of MXene and . Under the effect of "absorb-reflect-reabsorb", the as-prepared M 2 A 3 F composite material exhibits a high EMI SE of 39.90 dB and a low reflectivity coefficient of 0.1423 with an ultra-low volume ratio (2.72 % MXene and 4.25 % Ag). In addition, it features good mechanical properties, especially cyclic compression recovery. In sum, this study provides a novel solution for preparing high-performance EMI materials with absorption-dominated characteristics on a large scale.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Multifunctional composite with porous gradient structure for absorption-oriented ultrahigh electromagnetic interference shielding

Mengyao Li,Huimin Liao,Jian Wang

DOI: https://doi.org/10.1016/j.compositesa.2023.107637

2023-06-06

Abstract:The stable porous composite encapsulated with polydimethylsiloxane (PDMS) consisting of Ni-plated melamine foam () in different densities and Fe 3 O 4 -polyaniline (Pani) layer, exhibiting a positive conductive gradient to attain an effective shielding and absorbing effect on the electromagnetic wave (EMW). As the difference in conductivity of each layer and the presence of porous interfaces bring additional interface polarization while achieving multiple reflections, dielectric and magnetic losses of EMW, the electromagnetic interference shielding effectiveness (EMI SE) of the composite achieves 90 dB with an absorption value of 0.68. Furthermore, owing to the encapsulation effect of PDMS and the construction of Fe 3 O 4 -Pani layer, additional photothermal response and hydrophobicity are conferred while satisfying the mechanical and chemical stability of the composite. It provides a unique approach to the multi-functional integration of composites and opens up design ideas for sophisticated shielding composites in the future communication field.

materials science, composites,engineering, manufacturing
Asymmetric conductive structure design for stabilized composites with absorption dominated ultra-efficient electromagnetic interference shielding performance

Mengyao Li,Yujia Feng,Jian Wang

DOI: https://doi.org/10.1016/j.compscitech.2023.110006

IF: 9.1

2023-05-01

Composites Science and Technology

Abstract:Structurally asymmetric melamine foam (MF)/Polyaniline (Pani)/Fe3O4@reduced graphene oxide (rGO)/Ag-plated aramid paper (AgP)/Polydimethylsiloxane (PDMS) stabilized composites were successfully designed with controlled distribution of the conductive network to accomplish harmonization of electromagnetic absorption and shielding. Wherein, the upper MF/Pani/Fe3O4@rGO/PDMS foam combines in-situ polymerization and dip coating methods utilizing the synergistic effect of conductive Pani and Fe3O4@rGO to achieve superior impedance matching and absorption performance, while the dense conductive network formed in the bottom AgP by electroless plating technique ensures superior electromagnetic shielding effectiveness (EMI SE). With the rational arrangement of the absorptive and conductive shielding layers, MF/Pani/Fe3O4@rGO/AgP/PDMS composites demonstrate of 70 dB and extremely high absorption coefficient (A) of 0.86 at X-band. Notably, benefiting from the asymmetric structural design and PDMS wrapping, the composites possess superior thermal stability, mechanical strength and stable EMI SE. This valid work delivers a useful concept for the rational regulation of conductive networks in shielding composites, improving the applicability in practical environments.

materials science, composites
Random Nano-Structuring of PVA/MXene Membranes for Outstanding Flammability Resistance and Electromagnetic Interference Shielding Performances

Wei Wang,Anthony Chun Yin Yuen,Hu Long,Wei Yang,Ao Li,Lei Song,Yuan Hu,Guan Heng Yeoh

DOI: https://doi.org/10.1016/j.compositesb.2021.109174

2021-01-01

Abstract:Nowadays, highly flexible, ultrathin, and conductive polymer composites are exceptionally desirable for electromagnetic interference shielding (EMI) applications due to their unique mechanical strength and electrical and flame-resistant properties. While the traditional nanocomposites blending remains the mainstream method to fabricate polymer/inorganic composites, it results in poor electrical conductivity caused by the discontinuous connection of conductive network as well as the unsatisfactory mechanical strength limiting the further practical applications. Herein, we introduce a facile and practical methodology involving the fabrication of selfinterlocked poly (vinyl alcohol) (PVA) and conductive Ti3C2Tx MXene networks, then combining them to construct a nanostructure-engineered PVA/MXene membrane. This membrane exhibits superior mechanical strength, in which the tensile strength is about three times higher than the control PVA. Additionally, the membrane demonstrates outstanding fire-resistant performances with an 80% reduction of peak heat release rate than pure PVA. More importantly, this unique membrane with random conductive networks possesses an outstanding EMI shielding efficiency near 41 dB much greater than traditional composite, which meets the requirement of high-efficiency EMI shielding applications. This article displays a novel strategy to fabricate a nanostructured polymer membrane with outstanding fire resistance, electrical conductivity, and mechanical strength, targeted and designed for high-efficiency EMI shielding applications.
Lightweight and Thermal Insulation Fabric-Based Composite Foam for High-Performance Electromagnetic Interference Shielding

Yunbo Guo,Noira R. Vokhidova,Qin Wang,Bijian Lan,Yinxiang Lu

DOI: https://doi.org/10.1016/j.matchemphys.2023.127787

IF: 4.778

2023-01-01

Materials Chemistry and Physics

Abstract:With the rapid development of electronic devices, electromagnetic interference (EMI) has posed serious threats to human health. Therefore, wearable materials with high EMI shielding performance are urgently required for protecting people from electromagnetic radiation. Herein, electroless plating and compression molding methods were utilized to fabricate sandwich structured composite foam. Aramid-carbon blend fabrics with Co-Ni coatings were selected as the surfaces, and the porous polyurethane (PU) foam doped with diverse content of carbon nanotubes (CNTs) served as the core lightweight layer. With the CNTs doping content of 3 wt%, a 3D conductive network is precisely constructed in the core foam with a tested 13.82 GPa tensile strength. Through a "reflectionabsorption-reflection" triple-loss mechanism, the resulting composite foam possesses a favorable average EMI shielding effectiveness (SE) of 73.9 dB in the X band (8-12 GHz), which was far more than the requirement of 30 dB for common commercial EMI SE. In addition, the porous structure exhibits excellent thermal insulation properties within a wide range of temperature (0-150 degrees C) while presenting a low thermal conductivity of 0.0695 W/(m center dot K). Finally, the prepared composites were applied to the simulation scene of electromagnetic protection to explore its reliability and practicability as a wearable electromagnetic wave proof material. With the good combination of mechanical properties, thermal properties and excellent electromagnetic shielding properties, the prepared composites have a great application prospect in electromagnetic protective materials.

Endocrine Physiology of Electrolyte Metabolism

Intelligent shielding material based on VO 2 with tunable near-field and far-field electromagnetic response

Intelligent Off/On switchable electromagnetic wave absorbing material based on VO 2 nanowires

Tunable High-Performance Electromagnetic Interference Shielding of VO 2 Nanowires-Based Composite

Intelligent Off/On Switchable Microwave Absorption Performance of Reduced Graphene Oxide/VO2 Composite Aerogel

Lightweight Microwire/graphene/silicone Rubber Composites for Efficient Electromagnetic Interference Shielding and Low Microwave Reflectivity

Ultrathin Carbon Foams for Effective Electromagnetic Interference Shielding

Synthesis and mechanism investigation of wide-bandwidth Ni@MnO2 NS foam microwave absorbent

Integration of efficient microwave absorption and shielding in a multistage composite foam with progressive conductivity modular design

Heterogeneous silicon rubber composite foam with gradient porous structure for highly absorbed ultra-efficient electromagnetic interference shielding

Integrated Electromagnetic Device with On‐Off Heterointerface for Intelligent Switching Between Wave‐Absorption and Wave‐Transmission

Heterostructured composite foam with highly efficient absorption-dominant EMI shielding capability and mechanical robustness

Multifunctional heterostructured composite foam with tunable electromagnetic interference shielding

Conductive MXene/melamine sponge combined with 3D printing resin base prepared as an electromagnetic interferences shielding switch

Controllable Proton-Reservoir Ordered Gel towards Reversible Switching and Reliable Electromagnetic Interference Shielding

Tuning of anisotropic electrical conductivity and enhancement of EMI shielding of polymer composite foam via CO<sub>2</sub>-assisted delamination and orientation of MXene

MXene/Ag@ZnO/WPU/Melamine gradient composite foams prepared by a unidirectional evaporation approach for absorption-dominated electromagnetic interference shielding

Multifunctional composite with porous gradient structure for absorption-oriented ultrahigh electromagnetic interference shielding

Asymmetric conductive structure design for stabilized composites with absorption dominated ultra-efficient electromagnetic interference shielding performance

Random Nano-Structuring of PVA/MXene Membranes for Outstanding Flammability Resistance and Electromagnetic Interference Shielding Performances

Lightweight and Thermal Insulation Fabric-Based Composite Foam for High-Performance Electromagnetic Interference Shielding