Abstract:Electro-concentration enables treatment and nutrient recovery from source-separated urine, and is a potential technology for on-site treatment using a 3 compartment configuration that has anode, cathode and middle concentrate compartments. There is a particular focus on driving concentration towards the precipitation threshold in the concentrate compartment to generate solid ammonium salts, including ammonium bicarbonate. To evaluate controlling mechanisms and the feasibility of achieving high concentrations, a dynamic mechanistic model was developed and validated using experiments with synthetic urine. It was identified that high concentrations are prevented by increased back diffusion (diffusion from the middle chamber to the anolyte and catholyte) due to large concentration gradients, and the preferential migration of protons or hydroxide ions due to a loss of buffering capacity in the anolyte and catholyte (due to pH extremes). Model-based sensitivity analysis also identified that electrolyte ion concentrations (including buffer capacity) were the main controlling mechanisms, rather than membrane or electrolyte current transfer capacity. To attain high concentrations, operation should be done using a) a high current density (however there is a maximum efficient current density); b) feed at short hydraulic retention time to ensure sufficient buffer capacity; and c) a feed high in ammonium and carbonate, not diluted, and not contaminated with other salts, such as pure ureolysed urine. Taking into account electron supply and bio-anodic buffer limitations, model testing shows at least double the aqueous concentrations observed in the experiments may be achieved by optimising simple process and operational parameters such as flow rate, current density and feed solution composition. Removal of total ammonium nitrogen (TAN) and total carbonate carbon (TCC) was between 43-57% and 39-53%, respectively. Balancing the sometimes conflicting process goals of high concentrations and removal percentage will need to be considered in further application. Future experimental work should be directed towards developing electrodes capable of higher current densities. In addition it would be desirable to use ion exchange membranes with higher resistance to water fluxes and which limit back diffusion. Future modelling work should describe osmotic and electro-osmotic water fluxes as a function of the concentration gradient across the membranes and ionic fluxes, respectively. More generalised wastewater physico-chemistry speciation models should identify best methods where relatively simple Davies activity corrections do not apply.

Enhancing selective ammonium transport in membrane electrochemical systems

Ammonia Recovery from Manure Wastewater Using Membrane Electrochemical Systems

Effects of High Ammonia Loading and In-Situ Short-Cut Nitrification in Low Carbon‑nitrogen Ratio Wastewater Treatment by Biocathode Microbial Electrochemical System.

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Modelling recovery of ammonium from urine by electro-concentration in a 3-chamber cell

Stepwise Ammonium Enrichment Using Selective Battery Electrodes

Ammonium Recovery from Manure Wastewater and Simultaneous Electrosynthesis Using Ammonium-Ion Selective Redox Material

Ammonia enrichment and recovery via ion exchange from municipal wastewater after filtered by ultrafiltration membrane

Nickel-Based Membrane Electrodes Enable High-Rate Electrochemical Ammonia Recovery.

Graphene Oxide/Polyethyleneimine-Modified Cation Exchange Membrane for Efficient Selective Recovery of Ammonia Nitrogen from Wastewater

Ammonium crossover as a function of membrane type and operating conditions in flow cells for ammonia synthesis and water treatment applications

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

Ammonia Recovery from Manure Wastewater and Simultaneous Electrosynthesis and Wastewater Treatment Using Ion Selective Redox Material

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

A stacked transmembrane electro-chemisorption system connected by hydrophobic gas permeable membranes for on-site utilization of authigenic acid and base to enhance ammonia recovery from wastewater

Ammonia recovery from nitrate-rich wastewater using a membrane-free electrochemical system

Continuous high-purity bioelectrochemical nitrogen recovery from high N-loaded wastewaters

Electricity-driven ammonia oxidation and acetate production in microbial electrosynthesis systems

Ammonium Removal by a Novel Magnetically Modified Excess Sludge

Poisoning effects of na-ions on membrane electrode assemblies in proton exchange membrane water electrolysis and strategies for recovery

Coupling nitrate capture with ammonia production through bifunctional redox-electrodes