Abstract:A new magnetic IIP was synthesized to develop an environmentally benign SPE coupled FAAS method for preconcentration, trace determination and removal of the persistent, bio‐accumulative, toxic contaminant of emerging concern; Ni(II). The method was optimized using RSM‐CCD and ANN. Apart from regeneration Ni(II) loaded IIP was exploited for reduction of permanganate ions, further reducing pollution. In order to study transportation and biomagnification of Ni(II) trace‐determination, and removal of Ni(II) was performed in ground water, wastewater, and food samples. A novel silica fabricated allyloxy ethanol based imprinted polymer is synthesised with surface area of 333 m2 g−1 and average pore size of 6.5 nm by an environment friendly one pot surface imprinting process. It was employed for the selective solid‐phase extraction (SPE) of trace Ni(II) in real samples prior to FAAS determination. The factor settings produced via central composite design in response surface methodology (RSM) (pH: 3.6; initial concentration; 800 mg L−1 and time; 15 minute) provide adsorption capacity of 176 mg g−1. Artificial neural network model employed on the RSM data, provided better predictability. Sips isotherm model and BSf kinetic model describes best the sorption phenomena of the homogenous binding terrain. The developed SPE‐coupled FAAS method demonstrate a detection limit of 1.62 μg L−1, quantification limit of 4.17 μg L−1, and Linear dynamic range of 20–8000 μg L−1. It was successfully applied to determine nickel in food (Spinach, Radish, Green tea infusion, Black tea infusion, Coffee, Soya milk, Chocolate Soya milk, Tobacco) and wastewater samples (>99 % removal). For five replicate determinations, the method's relative standard deviation was 2.3 %. The method was validated by analysing two certified reference materials, and the outcomes were well‐congruent with standard values. For the synthesised polymer Ni(II) exhibits higher distribution ratio than other competing ions (Cu(II), Pb(II), Cd(II), and Zn(II)) with the imprinting factor; β values of 5.73, 4.98, 6.80, and 5.04 respectively. The reusability experiments revealed that APS@Ni‐IIP retains a strong adsorption efficacy even after 15 cycles and after its exhaustion it was employed as catalyst for reducing permanganate ions, further reducing pollution. The rigid structure of mesoporous silica contributes to its acid resilience and reusability, which can lead to a relative increase in polymer performance in absorption rate and selectivity. Apart from the novelty in the synthesis, thorough examination of the method and material selectivity (in binary, ternary and multielement system), multi fold applications of determination, removal of Ni(II) and reduction of permanganate ions, makes APS@Ni‐IIP a promising candidate for environmental remediation.

Dispersive micro-solid phase extraction (D-μSPE) of nickel on activated nanodiamonds@Bi2WO6 nanocomposite from water and food samples

Functionalized nanodiamonds with NiCoFe layered double hydroxides used as a novel adsorbent in dispersive solid phase microextraction for Pb(II) determination in juice samples

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Modification of magnetized MCM-41 by pyridine groups for ultrasonic-assisted dispersive micro-solid-phase extraction of nickel ions

Activated nanodiamonds (AND)-MIL-125 (Ti) (AND@MIL-125) nanocomposite for the micro-solid phase extraction of cadmium and lead from water and food samples

Nickel hydroxide nanoflower–based dispersive solid-phase extraction of copper from water matrix

Use of a new magnetic ion–imprinted nanocomposite adsorbent for selective and rapid preconcentration and determination of trace nickel by flame atomic absorption spectrometry

Magnetic Luffa@metal-organic frameworks (MOF-199) nanocomposite for the solid phase microextraction of some metal ions at trace levels from food and water samples

Silica Grafted Imprinted Mesoporous Polymer for the Development of SPE Coupled FAAS Method of Nickel Determination, Removal, and Spent Polymer for Reduction of Permanganate: Multivariate Optimization

Environmentally friendly nanoflower Al2O3@carbon spheres as adsorbent for dispersive solid-phase microextraction of copper and lead in food and water samples

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

Separation and enrichment of Cd and Pb from food and water samples based on a graphene oxide-decorated poly 2-diethylaminoethyl methacrylate nanocomposite by dispersive micro-solid phase extraction (d-μ-SPE)

Magnetic hydrophobic deep eutectic solvents for orbital shaker-assisted dispersive liquid-liquid microextraction (MAGDES-OS-DLLME) - Determination of nickel and copper in food and water samples by FAAS

Vortex‐Assisted Magnetic Solid‐Phase Extraction of Heavy Metals in Water and Food Samples Using Iron Oxide Nanoparticle‐Impregnated Carboxymethyl‐β‐Cyclodextrin

Solid phase extraction of heavy metal ions in environmental samples on multiwalled carbon nanotubes

Development and Application of Temperature-Induced Dispersive Solid Phase Extraction for Preconcentration and Determination of Cobalt Ions in Water and Food Samples

Preparation of a new coating of graphene oxide/nickel complex on a nickelized metal surface for direct immersion solid phase microextraction of some polycyclic aromatic hydrocarbons

Dispersive Micro‐Solid Phase Extraction of Selected Metals in Water and Food Samples Followed by ICP‐OES Analysis: Method Development, Analysis of Real Samples and Greenness Evaluation

Synthesis of the modified SBA-15 mesoporous silica with TAN ligand to preconcentrate and determine trace amounts of Ni (II) ions in water and wastewater samples

A Nickel separation from human blood samples based on Amine and Amide Functionalized magnetic graphene oxide nano structure by dispersive sonication micro solid phase extraction

Portable one-step effervescence tablet-based microextraction combined with smartphone digital image colorimetry: Toward field and rapid detection of trace nickel ion