Management of intestinal obstruction in advanced malignancy

H. Ferguson,C. Ferguson,J. Speakman,T. Ismail

DOI: https://doi.org/10.1016/j.amsu.2015.07.018

2015-08-01

Annals of Medicine and Surgery

Abstract:

What problem does this paper attempt to address?

Low-Cost and High-Performance Microporous Metal–Organic Framework for Separation of Acetylene from Carbon Dioxide

Ling Zhang,Ke Jiang,Jun Zhang,Jiyan Pei,Kai Shao,Yuanjing Cui,Yu Yang,Bin Li,Banglin Chen,Guodong Qian

DOI: https://doi.org/10.1021/acssuschemeng.8b05431

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Separation of acetylene (C2H2) from carbon dioxide (CO2) is very difficult and challenging because of their similar molecular sizes and associated physical properties. Realization of low-cost and high-performance porous materials is of importance to facilitate the implementation of energy-efficient adsorptive separation into practical gas separation applications. Here, we utilized a cheap and commercially available formic acid ligand to successfully construct a robust MOF material [Ni-3(HCOO)(6)center dot DMF] (1DMF), offering high chemical stability, low cost, and high selectivity toward C2H2 over CO2. The exceptional separation performance of the activated 1 is mainly attributed to the small pore size (4.3 angstrom) and functional O donor sites on the pore walls that provide strong binding affinity toward C2H2, as revealed by the detailed computational studies. This material thus exhibits ultrahigh low-pressure C2H2 uptake (38.2 cm(3) cm(-3) at 0.01 bar and 298 K) and possesses a high C2H2/CO2 selectivity (22.0 at ambient conditions), comparable to other leading porous materials. The high separation performance of 1 was further confirmed by the actual breakthrough experiments on a 50/50 C2H2/CO2 mixture.
Insights into the Ultra-High Volumetric Capacity in a Robust Metal–Organic Framework for Efficient C 2 H 2 /CO 2 Separation

Yi-Ming Gu,Hai-Feng Qi,Tan-Tan Sun,Xiao-Wei Liu,Salman Qadir,Tian-Jun Sun,De-Fu Li,Sheng-Sheng Zhao,David Fairen-Jimenez,Shu-Dong Wang

DOI: https://doi.org/10.1021/acs.chemmater.1c04168

IF: 10.508

2022-03-04

Chemistry of Materials

Abstract:The efficient separation of C2H2/CO2 is a challenging problem due to their similar physical properties. This is in addition to the risk of explosion when pressuring C2H2 over 2.07 bar. Besides, understanding the framework–guest and guest–guest interactions is also critical to achieving an optimal separation. Herein, we report the development of a robust and low-cost adsorbent, MIL-160(Al), with an extremely high acetylene volumetric capacity of 227 cm3(STP)/cm3 and high C2H2/CO2 selectivity of 7.1 under ambient conditions. We combine in situ solid-state nuclear magnetic resonance spectroscopy and in-depth theoretical calculations to unravel the synergistic interactions, driven by the hydrogen bonding of C2H2-MOF, and the electrostatic interactions between C2H2 molecules in the confined ångström-scale pores. This suitable pore confinement is also reflected in the rotation of the MOF ligands and the resultant evolution in the interacting distances between the metal–organic framework (MOF) backbone and C2H2 molecules. Acetylene is adsorbed as a unique dimer in MIL-160(Al), leading to an extremely efficient packing inside the pores. Breakthrough experiments confirm the efficient performance of MIL-160(Al) in real C2H2/CO2 mixtures, showing a C2H2-volumetric breakthrough performance superior to any previous MOF.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c04168.Additional experimental details on porosity and density analysis, chemical stability measurements, PXRD patterns, FT-IR spectra, TGA, SEM, 13C SSNMR, calculation of adsorption selectivity and enthalpy, DFT-D3 calculation, etc. (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical
Adsorption Separation of Acetylene and Ethylene in a Highly Thermostable Microporous Metal -Organic Framework

Yingcai Zhao,Jiawei Wang,Zongbi Bao,Huabin Xing,Zhiguo Zhang,Baogen Su,Qiwei Yang,Yiwen Yang,Qilong Ren

DOI: https://doi.org/10.1016/j.seppur.2017.11.044

IF: 8.6

2018-01-01

Separation and Purification Technology

Abstract:A magnesium-based metal-organic framework with high hydrothermal stability, Mg-CUK-1, was investigated for the adsorption separation of acetylene from ethylene. The synthesized MOF remained excellent thermostability even near 500 degrees C according to TGA results. Characterization techniques including FTIR, SEM, and PXRD were utilized to confirm the detailed structure and properties of the Mg-based MOF. It exhibited moderate adsorption capacities of C2H2 (3.01 mmol/g at 100 kPa and 273 K). Moreover, it showed preferential adsorption of C2H2 over C2H4 with C2H2/C2H4 adsorption selectivity over 3, outperforming some popular MOFs. Furthermore, the isosteric heat of C2H2 (< 21 kJ/mol) and C2H4 (< 18 kJ/mol) were extremely lower than those MOFs with open metal sites. From an industrial point of view, this MOF could be synthesized in absence of organic solvent, drastically reducing the risk of environmental pollution in the production process. Besides, such advantages as excellent hydrothermal stability, cheap and non-poisonous metal ion resource, high C2H2 adsorption capacity, and low isosteric heat make the Mg-based MOF promising in practical application.
A thermostable calcium-based metal–organic framework for efficient capture and separation of acetylene from ternary mixture

Shan-Qing Yang,Rajamani Krishna,Lei Zhou,Yi-Long Li,Bo Xing,Qiang Zhang,Fei-Yang Zhang,Tong-Liang Hu

DOI: https://doi.org/10.1016/j.seppur.2023.125167

IF: 8.6

2023-09-25

Separation and Purification Technology

Abstract:High-efficiency and eco-friendly selective separation of C 2 H 2 from industrial gaseous mixtures such as CO 2 and CH 4 is of great importance in the purification and production of downstream commodity chemicals. Herein, we report a thermostable calcium-based metal–organic framework, namely NUM-20 , which could preferentially capture C 2 H 2 from C 2 H 2 -containing gaseous mixtures. NUM - 20 exhibits a higher capacity and preferential adsorption behavior of C 2 H 2 versus the competing gases including CO 2 and CH 4 , as reflected by single component gas sorption isotherms and the heat of adsorption. The IAST selectivity calculations indicate that NUM - 20 possesses multiple component separation capacity, and the transient breakthrough simulations were performed to validate the capture and separation of C 2 H 2 from multiple components. Furthermore, computational simulations were carried out to unveil the host–guest interactions under the molecular-level. This study on Ca-based MOF materials will enrich the three-dimensional Ca-based MOF adsorbents for gas capture and separation applications and address the industrial challenging separation process.

engineering, chemical
Dense Packing of Acetylene in a Stable and Low‐Cost Metal–Organic Framework for Efficient C2H2/CO2Separation

Jiyan Pei,Hui-Min Wen,Xiao-Wen Gu,Quan-Li Qian,Yu Yang,Yuanjing Cui,Bin Li,Banglin Chen,Guodong Qian

DOI: https://doi.org/10.1002/anie.202110820

2021-01-01

Angewandte Chemie International Edition

Abstract:Porous materials for C2H2/CO2 separation mostly suffer from high regeneration energy, poor stability, or high cost that largely dampen their industrial implementation. A desired adsorbent should have an optimal balance between excellent separation performance, high stability, and low cost. We herein report a stable, low-cost, and easily scaled-up aluminum MOF (CAU-10-H) for highly efficient C2H2/CO2 separation. The suitable pore confinement in CAU-10-H can not only provide multipoint binding interactions with C2H2 but also enable the dense packing of C2H2 inside the pores. This material exhibits one of the highest C2H2 storage densities of 392 g L-1 and highly selective adsorption of C2H2 over CO2 at ambient conditions, achieved by a low C2H2 adsorption enthalpy (27 kJ mol(-1)). Breakthrough experiments confirm its exceptional separation performance for C2H2/CO2 mixtures, affording both large C2H2 uptake of 3.3 mmol g(-1) and high separation factor of 3.4. CAU-10-H achieves the benchmark balance between separation performance, stability, and cost for C2H2/CO2 separation.
Potential of a pH-Stable Microporous MOF for C2H2/C2H4 and C2H2/CO2 Gas Separations under Ambient Conditions

Shyam Chand Pal,Raka Ahmed,Arun K Manna,Madhab C Das

DOI: https://doi.org/10.1021/acs.inorgchem.2c03275

2022-11-14

Abstract:Cost-effective adsorption-based C2H2/C2H4 and C2H2/CO2 gas separations are extremely important in the industry. Herein, a pH-stable three-dimensional (3D) metal-organic framework (MOF), IITKGP-25, possessing exposed functional sites is presented, which facilitates such separations with excellent ideal adsorbed solution theory (IAST) selectivity (4.61 for C2H2/C2H4 and 3.93 for C2H2/CO2) under ambient conditions (295 K, 100 kPa, 50:50 gas mixtures) and a moderate affinity toward C2H2 (26.6 kJ mol-1). Interestingly, IITKGP-25 can maintain structural integrity in water and in aqueous acidic/alkaline (pH = 2-10) medium because of the higher coordination numbers around the metal center and the hydrophobicity of the ligand. The adsorption capacity for C2H2 remains unchanged for a minimum of up to five consecutive cycles and 15 days of exposure to 97% relative humidity, which are the prerequisites of an adsorbent for practical gas separation application. Density functional theory (DFT) calculations reveal that the open Cd(II) sites and carboxylate oxygen-coordinated Cd(II) corner of the triangle-shaped one-dimensional (1D) channel are the enthalpically more preferred binding sites for C2H2, which stabilize the adsorbed C2H2 through nonlocal stronger H-bonding and also pπ-dπ and CH-π interactions.
A Calcium-Based Microporous Metal-Organic Framework for Efficient Adsorption Separation of Light Hydrocarbons

Liangying Li,Lidong Guo,Siyu Pu,Jiawei Wang,Qiwei Yang,Zhiguo Zhang,Yiwen Yang,Qilong Ren,Sufian Alnemrat,Zongbi Bao

DOI: https://doi.org/10.1016/j.cej.2018.10.034

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Ideal metal-organic frameworks (MOFs) are those have not only significant adsorption separation performances but also excellent vapor and/or thermal stability. In this work, a calcium-based metal-organic framework with high vapor-stability and thermostability, Ca(squarate), was prepared using readily available precursor (CaCO3) and squaric acid as starting materials by hydrothermal method. Characterization techniques including PXRD, TGA and BET surface area analysis reveal that this MOF remains stable no matter whether it was soaked in water or exposed to air for as long as 2 weeks. Moreover, the studied MOF material is capable of discriminating C-2 hydrocarbon molecules as it has an appropriate pore diameter around 3.4 angstrom. Excellent efficient separation for C2H2/C2H4 mixture (50:50, v/v) with an adsorption selectivity of 8.1 was realized at room temperature and ambient pressure, on the other hand, it also displayed a good separation performance for C2H4/C4H6 mixture (50:50, v/v) with an adsorption selectivity of 5.9. Furthermore, adsorption mechanism of C-2 hydrocarbons in this framework was investigated by the DFT-D calculation. The results revealed that this framework discriminated light hydrocarbons as a result of different interaction strength between hydrocarbons and framework that mainly arise from pi-pi interactions.
A robust calcium-based microporous metal-organic framework for efficient CH4/N2 separation

Miao Chang,Jiahao Ren,Qingyuan Yang,Dahuan Liu

DOI: https://doi.org/10.1016/j.cej.2020.127294

IF: 15.1

2021-03-01

Chemical Engineering Journal

Abstract:Efficient CH4/N2 separation is of importance for natural gas purification, which is however a great challenge due to their very close kinetic diameters and thermodynamic properties. Herein, a robust microporous calcium-based metal-organic framework (MOF) named SBMOF-1 was prepared to separate CH4/N2 for the first time, in consideration of the biocompatible, low cost, low toxicity and natural abundance feature of Ca metal. With the help of the organic ligand containing multiple-aromatic rings with low polarity, this Ca-MOF exhibits a high CH4/N2 selectivity (11.5), which is comparable to the best materials reported so far while with relatively high CH4 adsorption capacity (about 20.7 cm3 (STP)/g). The results of GCMC simulations and DFT calculations indicate that pore centers are the most energetically-favorable binding sites, and the stronger adsorption affinity of CH4 can be attributed to its shorter average distance with the pore wall of the material. Breakthrough experiment results in combination of good stability and regenerability suggest the promising application of this MOF in natural gas purification.

engineering, chemical, environmental
Efficient C 2 H 2 /CO 2 Separation in Ultramicroporous Metal–Organic Frameworks with Record C 2 H 2 Storage Density

Wei Gong,Hui Cui,Yi Xie,Yingguo Li,Xianhui Tang,Yan Liu,Yong Cui,Banglin Chen

DOI: https://doi.org/10.1021/jacs.1c07191

IF: 15

2021-08-31

Journal of the American Chemical Society

Abstract:Physical separation of C2H2 from CO2 on metal–organic frameworks (MOFs) has received substantial research interest due to the advantages of simplicity, security, and energy efficiency. However, that C2H2 and CO2 exhibit very close physical properties makes their separation exceptionally challenging. Previous work appeared to mostly focused on introducing open metal sites that aims to enhance the C2H2 affinity at desired sites, whereas the reticular manipulation of organic components has rarely been investigated. In this work, by reticulating preselected amino and hydroxy functionalities into isostructural ultramicroporous chiral MOFs—Ni2(l-asp)2(bpy) (MOF-NH2) and Ni2(l-mal)2(bpy) (MOF-OH)—we targeted efficient C2H2 uptake and C2H2/CO2 separation, which outperforms most benchmark materials. Explicitly, MOF-OH adsorbs substantial amount of C2H2 with record storage density of 0.81 g mL–1 at ambient conditions, which even exceeds the solid density of C2H2 at 189 K. In addition, MOF-OH gave IAST selectivity of 25 toward equimolar mixture of C2H2/CO2, which is nearly twice higher than that of MOF-NH2. Notably, the adsorption enthalpies for C2H2 at zero converge in both MOFs are remarkably low (17.5 kJ mol–1 for MOF-OH and 16.7 kJ mol–1 for MOF-NH2), which to our knowledge are the lowest among efficient rigid C2H2 sorbents. The efficiencies of both MOFs for the separation of C2H2/CO2 are validated by multicycle breakthrough experiments. DFT calculations provide molecular-level insight over the adsorption/separation mechanism. Moreover, MOF-OH can survive in boiling water for at least 1 week and can be easily scaled up to kilograms eco-friendly and economically, which is very crucial for potential industrial implementation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/jacs.1c07191.Experimental procedures and characterization data (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary
A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Pengtao Guo,Yanling Chen,Miao Chang,Yuxiao Li,Qingyuan Yang,Dahuan Liu

DOI: https://doi.org/10.1021/acs.jced.1c00787

2022-02-25

Abstract:Due to the very close physical properties and kinetic diameters of CH4 and N2, the development of adsorbents for the efficient capture of methane from coal-bed methane (CBM) is a significant challenge. Porous materials can be used as adsorbents to separate CH4/N2 mixtures with low energy consumptions. However, most adsorbents suffer from poor stability and relatively low adsorption capacity of CH4, limiting their practical applications. Herein, we report a stable ultramicroporous Cu(I)-based metal–organic framework (MOF), NKMOF-8-Br, exhibits an excellent CH4 (1.84 mmol/g) adsorption capacity with a high CH4/N2 (50/50, v/v) selectivity (8.9), at 298 K and 1.0 bar. The CH4 adsorption capacity exceeds all water stable MOFs and other kinds of adsorbents used for CH4/N2 separation. Cyclic dynamic breakthrough experiments indicate that this sample can separate the CH4/N2 mixtures completely with good breakthrough regenerability. Therefore, it is a promising adsorbent for enriching CH4 from CBM.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.jced.1c00787.Material characterization, thermal stability of NKMOF-8-Br, dual-site Langmuir–Freundlich model fitting results, and detailed comparison table of selectivity and adsorption capacity, and computational methods (PDF)Additional data (XLSX)This article has not yet been cited by other publications.

engineering, chemical,thermodynamics,chemistry, multidisciplinary
Optimizing Multivariate Metal-Organic Frameworks for Efficient C2H2/CO2 Separation

Weidong Fan,Shuai Yuan,Wenjing Wang,Liang Feng,Xiuping Liu,Xiurong Zhang,Xia Wang,Zixi Kang,Fangna Dai,Daqiang Yuan,Daofeng Sun,Hong-Cai Zhou

DOI: https://doi.org/10.1021/jacs.0c00805

IF: 15

2020-01-01

Journal of the American Chemical Society

Abstract:Adsorptive separation of acetylene (C2H2) from carbon dioxide (CO2) promises a practical way to produce high-purity C2H2 required for industrial applications. However, challenges exist in the pore environment engineering of porous materials to recognize two molecules due to their similar molecular sizes and physical properties. Herein, we report a strategy to optimize pore environments of multivariate metal-organic frameworks (MOFs) for efficient C2H2/CO2 separation by tuning metal components, functionalized linkers, and terminal ligands. The optimized material UPC-200(Al)-F-BIM, constructed from Al3+ clusters, fluorine-functionalized organic linkers, and benzimidazole terminal ligands, demonstrated the highest separation efficiency (C2H2/CO2 uptake ratio of 2.6) and highest C2H2 productivity among UPC-200 systems. Experimental and computational studies revealed the contribution of small pore size and polar functional groups on the C2H2/CO2 selectivity and indicated the practical C2H2/CO2 separation of UPC-200(Al)-F-BIM.
Honeycomb-Like Pillar-Layered Metal–Organic Frameworks with Dual Porosity for Efficient C 2 H 2 /CO 2 and C 2 H 2 /C 2 H 4 Separations

Jing Zhang,Ying-Ying Xue,Peng Zhang,Hai-Peng Li,Ying Wang,Jie Xu,Shu-Ni Li,Quan-Guo Zhai

DOI: https://doi.org/10.1021/acs.cgd.1c01088

2021-11-19

Abstract:The storage of C2H2 and separating C2H2 from the mixture of CO2 or C2H4 are still huge challenges in industry due to their similar physical properties. Metal–organic frameworks (MOFs) as a new generation of high-capacity adsorbents can meet various separation needs. Here, honeycomb-like MOFs, named as [M3(OX)3(TPA)2] (SNNU-333, M = Co or Ni, OX = oxalic acid, TPA = Tri(pyridin-4-yl)amine) with tfz topology are successfully synthesized via the in situ ligand transformation process. SNNU-333 can be regarded as a pillar-layered framework with OX anions as pillars and [M3(TPA)2] as 2D layers or a rod-packing architecture with 1D inorganic [M(OX)(TPA)2] chains as rod-like building blocks. Such a linkage makes SNNU-333 highly porous networks with two types of micropores of about 6 and 12 Å, respectively. Unexpectedly, these MOFs with mononuclear building units are of good stability, and SNNU-333-Ni can keep the integrity of the framework in water and solution with pH values varying from 3 to 11 for 24 h. Taking advantage of the frameworks with dual porosity, SNNU-333 MOFs exhibit high C2H2 adsorption capacity as well as high separation performance of C2H2/CO2 and C2H2/C2H4 mixtures. The ideal adsorbed solution theory selectivity calculations, column breakthrough tests, and Grand Canonical Monte Carlo simulations further indicate SNNU-333 MOFs promising adsorbents for C2H2 adsorption and purification.

chemistry, multidisciplinary,materials science,crystallography
An ultramicroporous multi-walled metal–organic framework for efficient C2H2/CO2 separation under humid conditions

Weize Wang,Wenke Yuan,Cunding Kong,Yu-Chen Yang,Shuting Xi,Xiangyu Liu,Bo Liu

DOI: https://doi.org/10.1039/d3ta05242g

IF: 11.9

2023-11-06

Journal of Materials Chemistry A

Abstract:The removal of carbon dioxide (CO2) from acetylene (C2H2) is not only industrially important for acetylene purification but also scientifically challenging owing to their high similarities in physical properties and molecular sizes. Multi-walled and ultramicroporous metal–organic frameworks (MOFs) can provide multiple specific interactions with C2H2 supplied to form a cooperative effect for efficient separation property. Herein, we report a new strategy involving the extension of vertex to create an infinite multi-walled MOF (In-TATB) by 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (H3TATB) and In(III) ions. Two 3D frameworks built by In(III) chains and TATB3− molecules interpenetrate through the strong π–π interactions between triazine rings. Taking advantage of the confined ultramicroporous space (3.8 Å × 4.1 Å) and accessible sites of multiple walls, In-TATB shows high adsorption enthalpy of C2H2 (36.6 kJ mol–1 at 298 K and low-coverage) and excellent separation of C2H2/CO2 mixture with an IAST selectivity of 11.8 (at 298 K and 1 bar). More importantly, both dry and wet breakthrough results validated its exceptional separation performance for C2H2/CO2 mixtures, affording a high dynamic separation factor. This work provides a novel and powerful approach to address this extremely challenging gas separation in industry.

materials science, multidisciplinary,chemistry, physical,energy & fuels
A metal-organic framework for C2H2/CO2 separation under highly humid conditions: Balanced hydrophilicity/hydrophobicity

Xiao-Jing Xie,Heng Zeng,Mo Xie,Wei Chen,Gui-Fang Hua,Weigang Lu,Dan Li

DOI: https://doi.org/10.1016/j.cej.2021.132033

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Metal-organic frameworks (MOFs) intended for C2H2/CO2 separation should possess high C2H2/CO2 adsorption selectivity and large C2H2 adsorption capacity. Here we report the scalable synthesis of a cage-interconnected microporous MOF (JNU-2). Dynamic column breakthrough experiments on JNU-2 manifest a C2H2-capture capacity of 3.08 mmol g−1 for an equimolar C2H2/CO2 mixture at 298 K and 1 bar, exceeding the benchmark materials such as UTSA-74a and FeNi-M’MOF. Meanwhile, the selectivity factor was estimated to be ca. 1.5 for JNU-2 and consistent with the increasing flow rate. Theoretical calculations confirm that the surface of the JNU-2 framework enables preferential binding of C2H2 over CO2 via multiple C–H···O, C–H···N, and π-complexation interactions. More importantly, JNU-2 retains its C2H2/CO2 separation capacity under highly humid conditions. Although the equilibrium adsorption of H2O is much higher than those of C2H2 and CO2, kinetic studies reveal that the diffusion of C2H2 and CO2 in JNU-2 is more than two orders of magnitude faster than that of H2O. A balanced hydrophobicity/hydrophilicity of the MOF framework surface might be the key to achieving large adsorption capacity for nonpolar gas molecule while minimizing the competition of water vapor adsorption.

engineering, chemical, environmental
Synergistic Effect of Active Sites and a Multiple-Micropore System for a Metal–Organic Framework Exhibiting High Separation of CO 2 /CH 4 and C 2 H 2 /CH 4

Liang Wu,Meng Feng,Yuxiao Zhang,Yu Cao,Dongmei Wang,Chunxia Li

DOI: https://doi.org/10.1021/acs.inorgchem.1c01370

IF: 4.6

2021-07-26

Inorganic Chemistry

Abstract:Efficient gas separation and purification play a vital role in the current advanced development of industry, and the application of MOF adsorbents in this area with highly technical materials shows obvious advantages. On the basis of reticular chemistry, the 4-c lvt MOF adsorbent [CuDTTA]·3DMF·CH3CN has been constructed (CuDTTA; H2DTTA = 2,5-bis(1H-1,2,4-triazol-1-yl)terephthalic acid). CuDTTA reveals a multiple-micropore system and high-density active sites decorated on the channel surfaces, which are conducive to its extraordinary selectivity of CO2/CH4 and C2H2/CH4 (29 and 166, 1:1). In combination with an analysis of Qst values, CuDTTA possesses the synergistic effect of size sieving and abundant functional sites, significantly improving the gas adsorption and separation performance. Meanwhile, the results also reveal that functional sites have a stronger binding affinity toward C2H2 with respect to CO2. Such a conclusion renders CuDTTA to be a promising adsorbent material for industrial applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c01370.PXRD, TGA, additional structural figures, and crystal data for CuDTTA and calculations of selectivity from IAST (PDF)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
Customizing Pore System in a Microporous Metal–Organic Framework for Efficient C2H2 Separation from CO2 and C2H4

Qiang Zhang,Guan-Nan Han,Xin Lian,Shan-Qing Yang,Tong-Liang Hu

DOI: https://doi.org/10.3390/molecules27185929

IF: 4.6

2022-09-13

Molecules

Abstract:Selective-adsorption separation is an energy-efficient technology for the capture of acetylene (C2H2) from carbon dioxide (CO2) and ethylene (C2H4). However, it remains a critical challenge to effectively recognize C2H2 among CO2 and C2H4, owing to their analogous molecule sizes and physical properties. Herein, we report a new microporous metal–organic framework (NUM-14) possessing a carefully tailored pore system containing moderate pore size and nitro-functionalized channel surface for efficient separation of C2H2 from CO2 and C2H4. The activated NUM-14 (namely NUM-14a) exhibits sufficient pore space to acquire excellent C2H2 loading capacity (4.44 mmol g−1) under ambient conditions. In addition, it possesses dense nitro groups, acting as hydrogen bond acceptors, to selectively identify C2H2 molecules rather than CO2 and C2H4. The breakthrough experiments demonstrate the good actual separation ability of NUM-14a for C2H2/CO2 and C2H2/C2H4 mixtures. Furthermore, Grand Canonical Monte Carlo simulations indicate that the pore surface of the NUM-14a has a stronger affinity to preferentially bind C2H2 over CO2 and C2H4 via stronger C-H···O hydrogen bond interactions. This article provides some insights into customizing pore systems with desirable pore sizes and modifying groups in terms of MOF materials toward the capture of C2H2 from CO2 and C2H4 to promote the development of more MOF materials with excellent properties for gas adsorption and separation.

chemistry, multidisciplinary,biochemistry & molecular biology
Mixed Metal-Organic Framework with Multiple Binding Sites for Efficient C2 H2 /CO2 Separation

Junkuo Gao,Xuefeng Qian,Rui-Biao Lin,Rajamani Krishna,Hui Wu,Wei Zhou,Banglin Chen

DOI: https://doi.org/10.1002/anie.202000323

2020-03-09

Abstract:The separation of C2 H2 /CO2 is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal-organic framework (M'MOF), [Fe(pyz)Ni(CN)4 ] (FeNi-M'MOF, pyz=pyrazine), with multiple functional sites and compact one-dimensional channels of about 4.0 Å for C2 H2 /CO2 separation. This MOF shows not only a remarkable volumetric C2 H2 uptake of 133 cm3 cm-3 , but also an excellent C2 H2 /CO2 selectivity of 24 under ambient conditions, resulting in the second highest C2 H2 -capture amount of 4.54 mol L-1 , thus outperforming most previous benchmark materials. The separation performance of this material is driven by π-π stacking and multiple intermolecular interactions between C2 H2 molecules and the binding sites of FeNi-M'MOF. This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi-M'MOF as a promising material for C2 H2 /CO2 separation.
One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH 4 /N 2 Mixture

Pengtao Guo,Yunpan Ying,Dahuan Liu

DOI: https://doi.org/10.1021/acsami.3c18378

IF: 9.5

2024-02-02

ACS Applied Materials & Interfaces

Abstract:Separating CH(4) from coal bed methane is of great importance but challenging. Adsorption-based separation often suffers from low selectivity, poor stability, and difficulty to scale up. Herein, a stable and scalable metal-organic framework [MOF, CoNi(pyz-NH(2))] with multiple CH(4) binding sites was reported to efficiently separate the CH(4)/N(2) mixture. Due to its suitable pore size and multiple CH(4) binding sites, it exhibits excellent CH(4)/N(2) selectivity (16.5) and CH(4) uptake (35.9...

materials science, multidisciplinary,nanoscience & nanotechnology
Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Yong-Zhi Li,Gang-Ding Wang,Li-Na Ma,Lei Hou,Yao-Yu Wang,Zhonghua Zhu

DOI: https://doi.org/10.1021/acsami.0c21554

2021-01-19

Abstract:Separation or purification is one of the difficult problems in the petrochemical industry. To help solve the difficulty of separation or purification for C2H2/CO2 and C2Hn/CH4 in the chemical industry, we synthesized a new metal–organic framework (MOF), [Ni(dpip)]·2.5DMF·H2O (1), by a bipyridyl-substituted isophthalic acid ligand. The MOF includes two types of one-dimensional (1D) tubular channels with different sizes and porous environments. The unique tubular channels lead to not only remarkable gas sorption capacity of C2H4, C2H2, and CO2, but also good selectivity for C2H2/CH4, C2H2/CH4, CO2/CH4, and C2H2/CO2, as demonstrated by single-component sorption isotherm results, ideal adsorbed solution theory calculations, and dynamic breakthrough curves. Grand canonical Monte Carlo (GCMC) simulation reveals preferential adsorption sites in the MOF for CO2, C2H2, and C2H4. The MOF also exhibits an obvious size-selective absorption effect on vapor molecules.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21554</a>.X-ray crystallography; GCMC simulation; calculation of sorption heat for gas using Virial 2 model; selectivity prediction via IAST; crystallographic data of 1 (Table S1); selected bond lengths and angles of 1 (Table S2); coordination environment of Ni2+ ion in 1 (Figure S1); 3D (4,4)-c sqc net of 1 (Figure S2); PXRD patterns (Figure S3); TGA curves (Figure S4); porous distributions of 1a (Figure S5); fitted CO2, C2H2, C2H4, and CH4 adsorption isotherms of 1a (Figures S6 and S7); density contours (Figure S8); and VOC adsorption isotherms of 1a (Figure S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21554/suppl_file/am0c21554_si_001.pdf">PDF</a>)Crystallographic data (CCDC 2047212) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21554/suppl_file/am0c21554_si_002.cif">CIF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Fine-tuning of pore-space-partitioned metal-organic frameworks for efficient C2H2/C2H4 and C2H2/CO2 separation

Xiaobing Mu,Yingying Xue,Mancheng Hu,Peng Zhang,Ying Wang,Haipeng Li,Shuni Li,Quanguo Zhai

DOI: https://doi.org/10.1016/j.cclet.2022.03.019

IF: 9.1

2022-03-01

Chinese Chemical Letters

Abstract:Acetylene (C2H2) and ethylene (C2H4) both are important chemical raw materials and energy fuel gasses. But the effective removement of trace C2H2 from C2H4 and the purification of C2H2 from carbon dioxide (CO2) are particularly challenging in the petrochemical industry. As a class of porous physical adsorbent, metal-organic frameworks (MOFs) have exhibited great success in separation and purification of light hydrocarbon gas. Herein, we rationally designed four novel MOFs by the strategy of pore space partition (PSP) via introducing triangular tri(pyridin-4-yl)-amine (TPA) into the 1D hexagonal channels of acs-type parent skeleton. By modulating the functional groups of linear dicarboxylate linkers for the parent skeleton, a series of isoreticular PSP-MOFs (SNNU-278−281) were successfully obtained. The synergistic effects of suitable pore size and Lewis basic functional groups make these MOFs ideal C2H2 adsorbents. The gas adsorption experimental results show that all MOFs have excellent C2H2 uptakes. Specially, SNNU-278 demonstrates a high C2H2 uptake of 149.7 cm3/g at 273 K and 1 atm. Meanwhile, SNNU-278−281 MOFs also show extremely great C2H2 separation from CO2 and C2H4. The optimized SNNU-281 with high-density hydroxy groups exhibits extraordinary C2H2/CO2 and C2H2/C2H4 dynamic breakthrough interval times up to 31 min/g and 17 min/g under 298 K and 1 bar.

chemistry, multidisciplinary

Management of intestinal obstruction in advanced malignancy

Low-Cost and High-Performance Microporous Metal–Organic Framework for Separation of Acetylene from Carbon Dioxide

Insights into the Ultra-High Volumetric Capacity in a Robust Metal–Organic Framework for Efficient C 2 H 2 /CO 2 Separation

Adsorption Separation of Acetylene and Ethylene in a Highly Thermostable Microporous Metal -Organic Framework

A thermostable calcium-based metal–organic framework for efficient capture and separation of acetylene from ternary mixture

Dense Packing of Acetylene in a Stable and Low‐Cost Metal–Organic Framework for Efficient C2H2/CO2Separation

Potential of a pH-Stable Microporous MOF for C2H2/C2H4 and C2H2/CO2 Gas Separations under Ambient Conditions

A Calcium-Based Microporous Metal-Organic Framework for Efficient Adsorption Separation of Light Hydrocarbons

A robust calcium-based microporous metal-organic framework for efficient CH4/N2 separation

Efficient C 2 H 2 /CO 2 Separation in Ultramicroporous Metal–Organic Frameworks with Record C 2 H 2 Storage Density

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Optimizing Multivariate Metal-Organic Frameworks for Efficient C2H2/CO2 Separation

Honeycomb-Like Pillar-Layered Metal–Organic Frameworks with Dual Porosity for Efficient C 2 H 2 /CO 2 and C 2 H 2 /C 2 H 4 Separations

An ultramicroporous multi-walled metal–organic framework for efficient C2H2/CO2 separation under humid conditions

A metal-organic framework for C2H2/CO2 separation under highly humid conditions: Balanced hydrophilicity/hydrophobicity

Synergistic Effect of Active Sites and a Multiple-Micropore System for a Metal–Organic Framework Exhibiting High Separation of CO 2 /CH 4 and C 2 H 2 /CH 4

Customizing Pore System in a Microporous Metal–Organic Framework for Efficient C2H2 Separation from CO2 and C2H4

Mixed Metal-Organic Framework with Multiple Binding Sites for Efficient C2 H2 /CO2 Separation

One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH 4 /N 2 Mixture

Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Fine-tuning of pore-space-partitioned metal-organic frameworks for efficient C2H2/C2H4 and C2H2/CO2 separation