Preparation of Biologically Active Film-Forming Materials Based on Polyphosphate-Modified Chitosan

M. A. Kasatkina,N. Budantseva,N. R. Kil′deeva

DOI: https://doi.org/10.1007/s11094-016-1432-z

2016-08-11

Pharmaceutical Chemistry Journal

Abstract:

What problem does this paper attempt to address?

[Disseminated intravascular coagulation and ruptured aneurysm of the abdominal aorta].

J. Jausseran,P. Bergeron,M. Reggi,P. Varlet,M. Formichi,R. Courbier

1982-11-01

Annales de Chirurgie

Abstract:
Preparation, Characterization, and Foaming Properties of Soy Protein Nanoparticles by the Cross-Linking Reaction Induced by Microbial Transglutaminase

Sihong Wu,Jiujie Xia,Zhengxun Wei,Weijun Sun,Ximing Zhang,Ning Xiang

DOI: https://doi.org/10.1016/j.foodhyd.2023.108627

IF: 10.7

2023-01-01

Food Hydrocolloids

Abstract:Native soy proteins have limited surface properties, but fortunately, it is expected that their foaming behaviors can be improved through the enzymatic cross-linking method. In this paper, by using the cross-linking method with microbial transglutaminase (mTG) as the catalyst, soy protein isolate (SPI), soy β-conglycinin (7S), and soy glycinin (11S) nanoparticles (NPs) were prepared in the molten state of the protein induced by dithiothreitol (DTT). We compared the structural characteristics of these nanoparticles, including particle sizes, morphologies, zeta potentials, surface hydrophobicities, changes of spatial structure, and cross-linking degrees. In addition, their foaming properties, including foamabilities, foam stabilities, and bubble diameters, were also tested. The results show that there are no significant differences in the foamabilities between the native soy proteins and their nanoparticles with similar initial foam heights. However, it is found that 11S NPs have enhanced foam stabilities with longer half-lives and smaller changes in bubble size, which is closely related to their high wettability and cross-linking degree. This study may provide references for the application of soy protein nanoparticles as new foam stabilizers to replace the traditional foaming agents in the food industry.
Physicochemical properties and stability of oil-in-water emulsions stabilized by soy protein isolate and xanthan gum

Veljko Krstonošić,Nebojša Pavlović,Ivana Nikolić,Jovana Milutinov,Dejan Ćirin

DOI: https://doi.org/10.1016/j.ijbiomac.2024.129610

IF: 8.2

2024-01-26

International Journal of Biological Macromolecules

Abstract:The aim of this work was to determine rheological and disperse characteristics and stability of oil-in-water emulsions stabilized by soy protein isolate (SPI) and xanthan gum (XG), as natural components. The effects of their combination on emulsion stabilization have not been investigated yet. The existence of interactions between the two macromolecules were indicated by the influence of XG on SPI surface hydrophobicity and surface tension values. Increase in SPI concentration from 1 to 3 % shift of distribution curves towards smaller particle size, while the opposite effects of further increase of SPI was obtained. The emulsions stabilized by SPI showed shear-thinning flow behavior, which changed to thixotropic at 5 % of SPI concentration. The presence of XG in emulsions at low concentrations did not affect the size distribution of the droplets, while at 0.1 % of XG Sauter mean diameter value raised and distribution curves were shifted towards a higher particle size. The presence of XG at higher concentration resulted in thixotropic flow behavior of emulsions. Also, increase in XG concentration led to the increase in consistency index and extent of non-Newtonian behavior of emulsions and enhanced the influence of the elastic modulus and creaming stability of the systems.

polymer science,biochemistry & molecular biology,chemistry, applied
Effect of glycation with three polysaccharides on the structural and emulsifying properties of ovalbumin

Yaxue Hu,Qiqi Bian,Lijia Chen,Xichang Wang,Jian Zhong

DOI: https://doi.org/10.1016/j.fochx.2024.101632

2024-07-06

Abstract:Herein, three types of ovalbumin (OA)-polysaccharide conjugates were prepared with three polysaccharides (XG: xanthan gum; GG: guar gum; KGM: konjac glucomannan) for the fish oil emulsion stabilization. The glycation did not change the spectra bands and secondary structure percentages of OA, whereas it decreased the molecular surface hydrophobicity of OA. The initial emulsion droplet sizes were dependent on the polysaccharide types, OA preparation concentrations, polysaccharide: OA mass ratios, and glycation pH. The emulsion stability was mainly dependent on the polysaccharide types, polysaccharide: OA mass ratios, and glycation pH. However, it was minorly dependent on the OA preparation concentrations. The emulsions stabilized by conjugates with high polysaccharide: OA mass ratios (e.g., ≥3:5 for OA-GG) or appropriate glycation pH (e.g., 5.0-6.1 for OA-XG) showed no obvious creaming during the room temperature storage. This work provided basic knowledge on the structural modification and functional application of a protein.
Effects of soybean protein isolate − polyphenol conjugate formation on the protein structure and emulsifying properties: Protein − polyphenol emulsification performance in the presence of chitosan

Shizhang Yan,Fengying Xie,Shuang Zhang,Lianzhou Jiang,Baokun Qi,Yang Li

DOI: https://doi.org/10.1016/j.colsurfa.2020.125641

2021-01-01

Abstract:Herein, we investigated the influence of covalent complexation between (−)-epigallocatechin gallate (EGCG) and soy protein isolate (SPI) on the structural and emulsifying properties of the protein as well as the effect of chitosan (CS) on the stability of emulsions formed by the covalent conjugates. The formation of the covalent complex of SPI and EGCG was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Three-dimensional fluorescence spectroscopy and circular dichroism spectroscopy were conducted to analyze the changes in the protein structure at different EGCG concentrations (0.005, 0.015, and 0.025 wt%). The addition of EGCG changed the tertiary conformation and secondary structure of the protein—unfolding of the protein polypeptide chain, decrease in the β-strand content, and increase in α-helix and random coil contents were observed. After covalent bonding of SPI with EGCG (0.015 wt %), the complex exhibited optimal solubility and emulsifying properties. SPI–EGCG–CS emulsions were prepared by layer-by-layer electrostatic assembly at pH 5.0. The effect of environmental stress on the stability of the CS–loaded SPI–EGCG (0.015 wt%) emulsion oil droplets was studied by freezing (−20 ℃, pH 5) and thermal treatment (90 ℃, 30 min, pH 5). The stability of the emulsion was improved when the CS concentration was >0.25 wt%; this improvement was attributed to the increase in electrostatic force and steric hindrance among droplets and the formation of a relatively thick biopolymer interface on the surface of oil droplets. In addition, the rheological properties showed that thicker interface layers and network structures caused deviations from the flow behavior of emulsions. These results indicate that SPI − EGCG conjugates can be used as food additives and for the construction of the lipophilic active ingredient delivery system.

chemistry, physical
Effects of glycation methods on the interfacial behavior and emulsifying performance of soy protein isolate-gum Arabic conjugates

Sirui Feng,Suyun Zhang,Minghao Jiang,Feng Liu,Kexian Chen,Yue Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2023.123554

IF: 8.2

2023-04-01

International Journal of Biological Macromolecules

Abstract:Glycated conjugation of plant protein such as soy protein isolate (SPI) with saccharides is one popular strategy to modify the physicochemical characteristics of these plant protein resources, which may be affected by the glycation methods including dry-heating and wet-heating. In this study, the impact of these two glycation methods on the rheological and emulsifying properties of a binary system made by SPI-gum Arabic (GA) was studied. The results indicated that dry-heating conjugates had higher viscosity and more elastic characteristics than those wet-heating conjugates. The emulsifying properties of SPI-GA conjugates by different preparation routes were evaluated by various oil phases including eugenol, cinnamaldehyde and soybean oil. Overall, emulsions stabilized by dry-heating conjugates showed lower zeta-potential value than those with wet heating conjugates. The interfacial properties of these conjugates were compared using soybean oil emulsion as a model. Higher emulsifying ability and stability were obtained by emulsions with dry-heating conjugates, which was attributed to their more compact structures, higher protein adsorption capacity and thicker viscoelastic films formed at the interface, and therefore enhanced electrostatic repulsion between droplets. The findings in this study are useful for fabrication and utilization of protein-polysaccharide glycation conjugates as emulsifiers in functional foods.

polymer science,biochemistry & molecular biology,chemistry, applied
Highly ordered aggregation of soy protein isolate particles for enhanced gel-related properties through konjac glucomannan addition

Wenyao Tu,Xizhong Liu,Kexin Li,Binjia Zhang,Fatang Jiang,Dongling Qiao

DOI: https://doi.org/10.1016/j.foodchem.2024.141004

2024-08-26

Abstract:This study assessed the effect of konjac glucomannan (KGM) on the aggregation of soy protein isolate (SPI) and its gel-related structure and properties. Raman results showed that KGM promoted the rearrangement of SPI to form more β-sheets, contributing to the formation of an ordered structure. Atomic force microscopy, confocal laser scanning microscopy, and small-angle X-ray scattering results indicated that KGM reduced the size of SPI particles, narrowed their size distribution, and loosened the large aggregates formed by the stacking of SPI particles, improving the uniformity of gel system. As the hydrogen bonding between the KGM and SPI molecules enhanced, a well-developed network structure was obtained, further reducing the immobilized water's content (T22) and increasing the water-holding capacity (WHC) of SPI gel. Furthermore, this gel structure showed improved gel hardness and resistance to both small and large deformations. These findings facilitate the design and production of SPI-based gels with desired performance.
Improving gel properties of soy protein isolate through alkaline pH-shifting, mild heat treatment, and TGase cross-linking

Ping Sun,Qin Zhang,Yu Zhao,Dongshun Zhao,Xiaohui Zhao,Lianzhou Jiang,Yan Zhang,Fei Wu,Xiaonan Sui

DOI: https://doi.org/10.1016/j.foodhyd.2023.108924

IF: 10.7

2023-05-01

Food Hydrocolloids

Abstract:Improving the functional properties of soybean protein isolate (SPI) is essential for expanding its applications in food-related fields, given its poor solubility and gelation. This study investigated the effect of alkaline pH-shifting and mild heating on the structure of SPI, as well as the gel properties after TGase cross-linking. Solubility of SPI increased with increasing alkalinity from pH 7.0 to 12.0 at 25 °C, accompanied by decreased particle size and increased surface hydrophobicity. At pH 12.0 and 50 °C, SPI showed the highest solubility, smallest particle size, and best surface hydrophobicity. Intrinsic fluorescence spectra revealed that the protein structure unfolded after combined treatment, exposing more hydrophobic groups. TGase cross-linking modified SPI exhibited significantly increased gel hardness and water holding power. Therefore, alkaline pH transfer combined with mild heating treatment has great potential for generating functional modified SPI and provides a simple and easy method for preparing SPI with diverse gel and structural properties.

food science & technology,chemistry, applied
Effect of glycosylation and limited hydrolysis on structural and functional properties of soybean protein isolate

Chun-Li Song,Jian Ren,Jia-Peng Chen,Xiao-Hong Sun,Narasimha-Kumar Kopparapu,Yong-Guo Xue

DOI: https://doi.org/10.1007/s11694-018-9910-5

2018-08-23

Abstract:The effects of glycosylation followed by limited hydrolysis on the structural and functional properties of soybean protein isolate (SPI) were investigated. SPI was glycosylated by transglutaminase (TGase) in the presence of oligochitosan to generate a glycosylated soybean protein isolate (GSPI) and then hydrolyzed using Alcalase to obtain hydrolysates with degree of hydrolysis (DH) of 1%, 2% and 4%. Structural properties were characterized using estimate of molecular weight distribution and circular dichroism (CD) spectra. Electrophoresis analysis revealed that GSPI contains peptide polymers, and its hydrolysates exhibit broad molecular weight distributions. CD analysis indicated more flexible structure for GSPI compared to SPI, and the following limited hydrolysis of GSPI induces even more flexible structure on its hydrolysates. GSPI showed significant increase in the apparent viscosity at the shear rate of 0.1–10/s. Emulsion stability of GSPI also increased by 33.9% than that of SPI. Hydrolysates from GSPI, especially for DH of 4%, showed significantly improved emulsifying activity index, increasing by 39.2% compared to SPI. The hydrolysates also showed notably enhanced antioxidant activities, namely, DPPH radical-scavenging ability and reducing power. These results revealed that TGase-induced glycosylation and further limited hydrolysis may have potential for creating food ingredients with improved functional properties.

food science & technology
Stabilization of O/W emulsions via interfacial protein concentrating induced by thermodynamic incompatibility between sarcoplasmic proteins and xanthan gum

Feifei Du,Yue Qi,Hongbing Huang,Peng Wang,Xinglian Xu,Zongyun Yang

DOI: https://doi.org/10.1016/j.foodhyd.2021.107242

IF: 10.7

2022-03-01

Food Hydrocolloids

Abstract:Thermodynamic incompatibility between sarcoplasmic proteins (SPs) and xanthan gum (XG) in aqueous solutions and enhanced emulsion stabilization induced by interfacial concentrating were discovered in this research. The phase diagram was investigated in the dependence of the concentrations of SP and XG at pH 7.2. With XG fixed at 0.5%, as the SP concentration in the solution system was increased, the mean particle size of the aqueous system decreased gradually. This might be attributed to the reduction in the aggregation of XG. The Turbiscan Stability Index and delta backscattering profiles indicted that 1% was the critical SP concentration, thermodynamic incompatibility then enhanced greatly and led to phase separation once exceeding 1%. Particle size distribution results and confocal laser scanning microscopy images revealed that in the emulsion system, the particle size distribution of the droplets and flocculation decreased as the SP concentration reached 2% (w/v). The results of interfacial properties suggested that due to the interfacial concentrating effect by XG, more SPs are adsorbed onto the oil-water interface, resulting in an increase in interfacial pressure. The decrement in ζ-potential in the presence of XG (from −23.42 mV to −21.80 mV at 2% SPs) implied that the charge stabilization effect did not dominate in the stabilization of SP/XG-based emulsions. The emulsion with 0.5% XG showed better physical stability. Our research may have potential implications for the recycle of SPs and the regulation of meat-protein-based emulsions by the interfacial concentrating effect.

food science & technology,chemistry, applied
Effect of polysaccharide on structures and gel properties of microgel particle reconstructed soybean protein isolate/polysaccharide complex emulsion gels as solid fat mimetic

Zixin Wang,Jie Long,Caimeng Zhang,Yufei Hua,Xingfei Li

DOI: https://doi.org/10.1016/j.carbpol.2024.122759

2025-01-01

Abstract:In this work, a soybean protein isolate (SPI)/polysaccharide microgel particle reconstructed emulsion gels (MPEG) were fabricated through heat-induced gel (HG)-microgel particle-transglutaminase (TG) induced gel process in the presence of four polysaccharides (κ-carrageenan, κC; konjac glucomannan, KGM; high-acyl gellan, HA and xanthan gum, XG). HG exhibited a higher springiness than that of pig back fat (PBF) regardless of polysaccharide type and concentration. After forming MPEG, the springiness was significantly lowered at ≥0.6 % κC, which made MPEG exhibit similar springiness of PBF; while SPI/KGM, SPI/XG and SPI/HA systems failed to regulate the springiness property. Rheological behavior revealed the loss in elasticity, the increase in the plastic deformation of SPI/κC MPEG, while KGM, XG and HA systems still exhibited elasticity dominated rheological properties. Compared with KGM, XG, the presence of excess κC and HA disturbed the continuous protein network structure, resulting to the aggregation of microgel particles and oil droplets. Disulfide bonds and hydrophobic interactions mainly contributed to the formation of MPEG, while the addition of κC weakened the contribution of them, which was not conducive to the formation of gel network. This study provides a guidance on the development of solid fat mimetic based on the microgel particle emulsion gels.
Assessment of Soy Protein Acid Hydrolysate—Xanthan Gum Mixtures on the Stability, Disperse and Rheological Properties of Oil-in-Water Emulsions

Dejan Ćirin,Nebojša Pavlović,Ivana Nikolić,Veljko Krstonošić

DOI: https://doi.org/10.3390/polym15092195

IF: 5

2023-05-06

Polymers

Abstract:There is a growing need for natural ingredients that could be utilized for the production of food, pharmaceutical, and cosmetic emulsions. Soy protein acid hydrolysate (SPAH) is a plant-based additive used in the food industry mainly as a flavor enhancer. For the purpose of this work, however, it was mixed with a well-known natural polysaccharide, xanthan gum (XG), to produce stable 30% (w/w) sunflower oil-in-water emulsions using a rotor-stator homogenizer. In order to assess the emulsifying properties of the SPAH and its mixtures with XG, the surface tension properties of their water solutions, particle size, creaming stability, and rheological properties of the emulsions were investigated. Since the emulsions prepared using only SPAH, in various concentrations, were not stable, systems containing 5% of SPAH and 0.1, 0.2, 0.3, 0.4, or 0.5% of XG were then studied. The increase in concentration of the macromolecule led to an increase in creaming stability. The emulsions with 5% SPAH and 0.5% XG were stable for at least 14 days. The increase in XG concentration led to a decrease in d4,3, while consistency index and non-Newtonian behavior increased. The systems containing SPAH, in the absence of XG, showed shear-thinning flow behavior, which was changed to thixotropic with the addition of XG. Viscoelastic properties of emulsions containing over 0.2% of XG were confirmed by oscillatory rheological tests, demonstrating the dominance of elastic (G') over viscous (G") modulus.

polymer science
Effects of Sequential Enzymolysis and Glycosylation on the Structural Properties and Antioxidant Activity of Soybean Protein Isolate

Qing Zhang,Lin Li,Lan Chen,Shuxiang Liu,Qiang Cui,Wen Qin

DOI: https://doi.org/10.3390/antiox12020430

IF: 7.675

2023-02-09

Antioxidants

Abstract:The effects of limited hydrolysis following glycosylation with dextran on the structural properties and antioxidant activity of the soybean protein isolate (SPI) were investigated. Three SPI hydrolysate (SPIH) fractions, F30 (>30 kDa), F30-10 (10–30 kDa), and F10 (<10 kDa), were confirmed using gel penetration chromatography. The results demonstrated that the glycosylation of F30 was faster than that of F30-10 or F10. The enzymolysis caused the unfolding of the SPI to expose the internal hydrophobic cores, which was further promoted by the grafting of dextran, making the obtained conjugates have a loose spatial structure, strong molecular flexibility, and enhanced thermal stability. The grafting of dextran significantly enhanced the DPPH- or •OH-scavenging activity and the ferrous reducing power of the SPI or SPIH fractions with different change profiles due to their different molecular structures. The limited enzymolysis following glycosylation was proven to be a promising way to obtain SPI-based food ingredients with enhanced functionalities.

biochemistry & molecular biology,chemistry, medicinal,food science & technology
Konjac glucomannan-assisted fabrication of stable emulsion-based oleogels constructed with pea protein isolate and its application in surimi gels

Zhifeng Tan,Xiaoqing Yang,Zheming Wang,Zhejin Chen,Jinfeng Pan,Qinxiu Sun,Xiuping Dong

DOI: https://doi.org/10.1016/j.foodchem.2024.138538

2024-06-15

Abstract:Konjac glucomannan (KGM) is widely used as a stabilizer for the structuring of highly unsaturated oils. This study aimed to investigate the changes in structure and functional properties of soybean oil - based oleogels (emulsion template method) prepared with different amounts of KGM-modified pea isolate protein (PPI). The findings revealed that the oleogels formed three - dimensional networks through van der Waals interactions and hydrogen bonding between the stretched PPI and KGM. As the amount of KGM increased, the oil droplets were more uniformly dispersed within the continuous PPI - KGM rigid network, especially when the ratio of PPI to KGM was 4:1. This formulation also showed the highest thixotropy (73.2 %) and the best oil binding capacity (94 %). Cryo - SEM revealed that the oleogel - prepared surimi gels successfully enclosed oil droplets in a dense matrix through a dual stabilization mechanism. Additionally, the incorporation of oleogels significantly improved the textural properties of surimi in comparison to directly adding oil.
Fabrication and characterization of succinylated and glycosylated soy protein isolate and its self-assembled nanogel

Mingyu He,Meng Zhang,Tian Gao,Zengnan Liu,Le Chen,Yue Liu,Yuyang Huang,Fei Teng,Yang Li

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125104

IF: 8.2

2023-05-01

International Journal of Biological Macromolecules

Abstract:In this study, we used succinic anhydride (SA) acylation and dextran (DX) glycosylation modified soybean isolate protein (SPI) to develop self-assembled SPI-SA-DX adduct-based nanogels. Degree of modification, SDS-PAGE, and FT-IR studies showed that the amino group of the SPI was replaced by hydrophilic dextran and succinic acid carboxyl groups. Dextran chain and anhydride group attachment to the soybean protein surface enhanced hydrophilicity and spatial site blocking. Modification-induced protein structure unfolding, free sulfhydryl groups to be converted to disulfide bonds, and reduced surface hydrophobicity (H0). H0 was lowest at 33,750 ± 1008.29 when SA content = 10 % protein content (SPI-SA3-DX). The nanometer gel based on SPI-SA3-DX had the maximum turbidity and clear transparent solution without precipitation. Its particle size and polymer dispersibility index (PDI) were also the smallest, with values of (106.87 ± 4.51) nm and 0.21 ± 0.009, respectively. Transmission electron microscopy showed that nanogels had subspherical shell-core structures. Nanogels were stable under different pH, ionic strength, high temperature, and storage conditions.

polymer science,biochemistry & molecular biology,chemistry, applied
Effect of Lycium barbarum polysaccharides on heat-induced gelation of soy protein isolate

Haoran Xing,Xuguang Liu,Yunfeng Hu,Kailei Hu,Junran Chen

DOI: https://doi.org/10.1016/j.foodhyd.2023.109323

IF: 10.7

2023-09-28

Food Hydrocolloids

Abstract:As a versatile ingredient, soy protein isolate (SPI) has been widely used in the food industry and the gelling property of SPI can be further modified using exogenous polysaccharides to achieve desired functionalities and nutritional properties. Therefore, in this study, the effect and mechanism of Lycium barbarum polysaccharides (LBP) on the gelling behavior of soy protein isolate (SPI) were investigated. It was found that the gel strength, water-holding capacity, and viscoelastic properties of SPI gel were improved with the addition of LBP (0.5–2.5%, w/v) in a concentration-dependent manner. Thermogravimetric analysis indicated that the thermal stability of SPI was also improved with the addition of LBP. The FTIR spectroscopy revealed that LBP addition had no significant effect on the α-helix and random coil content of SPI but significantly increased the β-sheet content and reduced the β-turn content. Furthermore, through intrinsic fluorescence, surface hydrophobicity, free sulfhydryl content, and protein solubility analysis, it was concluded that the electrostatic and hydrophobic interactions played a critical role in the formation of the SPI-LBP gel composite. Interestingly, the disulfide bond formation was the least contributor to the binary gel composite network. Overall, LBP is not only an important nutritional supplement but also a promising functional ingredient for improving the gel properties of SPI.

food science & technology,chemistry, applied
Soybean protein isolate-sodium alginate double network emulsion gels: Mechanism of formation and improved freeze-thaw stability

Shijiao Wang,Zenan Wu,Lingyue Jia,Xinhui Wang,Tian He,Lu Wang,Gaojie Yao,Fengying Xie

DOI: https://doi.org/10.1016/j.ijbiomac.2024.133296

Abstract:Soybean protein isolate (SPI) is widely used in the food industry. However, SPI-based emulsion gels tend to aggregate and undergo oiling-off during freeze-thawing. In this study, emulsion gels were prepared by a combination of heat treatment and ionic cross-linking using SPI and sodium alginate (SA) as raw materials. The focus was on exploring the mechanistic effects of the SPI-SA double network structure on the freeze-thaw stability of emulsion gels. The results showed that the addition of SA could form different types of network structures with SPI, due to different degrees of phase separation. In addition, SA appearing on the SPI network indicated that the addition of Ca2+ shielded the electrostatic repulsion between SPI and SA to form SPI-SA complexes. The disappearance of the characteristic peaks of SA and SPI in Fourier transform infrared spectroscopy analysis also confirmed this view. Low-field nuclear magnetic resonance data revealed that SA played a role in restricting water migration within the emulsion gels, increasing bound water content, and thereby improving the water-holding capacity of the emulsion gels. Therefore, the incorporation of SA improved the freeze-thaw stability of SPI emulsion gels. These findings offer a theoretical basis and technical support for SPI application in frozen products.
Development of soy protein isolate emulsion gels as extrusion-based 3D food printing inks: Effect of polysaccharides incorporation

Jie Yu,Xue-ying Wang,Dong Li,Li-jun Wang,Yong Wang

DOI: https://doi.org/10.1016/j.foodhyd.2022.107824

IF: 10.7

2022-05-30

Food Hydrocolloids

Abstract:Soy protein isolate (SPI) emulsion gel inks with polysaccharides of guar gum (GG) or xanthan gum (XG) for extrusion-based three-dimensional (3D) printing were investigated. The effects of the polysaccharide type and concentration on the printability, rheological properties, and microstructure of inks were discussed. Results indicated that the 3D printed products of SPI-GG 0.5 inks demonstrated low dimensional printing deviation with great self-supporting capability and smooth and slightly flawed surface texture, while SPI-XG 0.5 inks had the highest hardness and rough surface texture. The results of small amplitude oscillatory shear (SAOS) and large amplitude oscillatory shear (LAOS) test proved that SPI-XG 0.5 inks exhibited the maximal gel strength, providing its 3D printed products with highest hardness. Secondary loops of Lissajous plots wouldn't emerge in SPI-XG 0.5 inks, indicating decreased network flexibility and slightly larger dimensional printing deviation. The microstructure and fourier transform infrared (FTIR) analysis suggested the interaction of SPI with XG was stronger than that of GG due to hydrogen bonding and electrostatic interactions. When the XG concentration reached 0.5%, the network structure of the inks was changed, resulting in a rough surface texture of the 3D printed product. There are few studies on 3D printing of SPI emulsion gels, and this research offers more possibilities for the development of 3D printing inks.

food science & technology,chemistry, applied
Create Fat Substitute From Soybean Protein Isolate/Konjac Glucomannan: The Impact of the Protein and Polysaccharide Concentrations Formulations

Lu Huang,Yuqing Ren,He Li,Qibo Zhang,Yong Wang,Jinnuo Cao,Xinqi Liu

DOI: https://doi.org/10.3389/fnut.2022.843832

2022-03-09

Abstract:In this study, soybean protein isolate (SPI) and coconut oil were emulsified and konjac flour was added to prepare the protein/polysaccharide composite emulsion gel. The SPI/polysaccharide compound fat substitute was obtained by vacuuming. The effects of protein and konjac flour addition on the gel system of the mixed emulsion were explored. Sensory evaluation experiments showed that the overall acceptability of fat substitutes added with 1% SPI was higher. With the increase of protein and konjac content, the juiciness of the samples decreased gradually. The increase of konjac content reduced the brightness of compound fat substitutes, and the yellowness of compound fat substitute increases significantly with the increase of protein content. The rheological results showed that the G' and loss modulus (G″) increased with the increase of protein and konjac content, forming a rigid elastic gel matrix, which provided a basis for the preparation of fat substitutes. Texture profile analysis (TPA) results showed that the springiness of all samples was similar to the natural fat after 20 min of heating. With the increase of protein and konjac content, the hardness of the samples increased gradually. The results of oral tribology showed that the friction coefficients of all samples were very small. The friction behavior of the samples with SPI content of 1% was similar to that of natural fat, which could better simulate the swallowing feeling and lubricity of natural fat. To sum up, the appearance of solid fat substitutes prepared with SPI and konjac flour is similar to pork fat. They show ideal functional characteristics in mechanical properties and oral tribology. Among them, the fat substitute with the protein content of 1% and konjac content of 4% is the most popular among consumers.
Influence of xanthan gum on properties and stability of oil-in-water Pickering emulsions stabilized by zein colloidal particles

Jiratthitikan Sriprablom,Manop Suphantharika

DOI: https://doi.org/10.1007/s11694-022-01386-2

2022-04-15

Abstract:Influence of xanthan gum (XG) concentration (0–0.5%) on physical and rheological properties and stability of oil-in-water (O/W) Pickering emulsions stabilized by zein colloidal particles was investigated. Protein zein interacted with XG in solution from pH 3.0 to 9.0. The isoelectric point of zein was 6.2. At pH 5.5, electrostatic and steric repulsion between droplets increased whereas droplet size and degree of droplet flocculation decreased with increasing XG concentration, resulting in an increase in emulsion stability against creaming. At 0.1% XG, the emulsions were highly unstable due to the effective size of flocculated droplets was so large that the viscosity was not high enough to prevent the flocs movement. At 0.5% XG, however, the emulsions were highly stable due to the formation of gel-like structures which immobilized the oil droplets. This study demonstrates an importance of polysaccharide concentration on the improvement of emulsion stability.

food science & technology

Preparation of Biologically Active Film-Forming Materials Based on Polyphosphate-Modified Chitosan

[Disseminated intravascular coagulation and ruptured aneurysm of the abdominal aorta].

Preparation, Characterization, and Foaming Properties of Soy Protein Nanoparticles by the Cross-Linking Reaction Induced by Microbial Transglutaminase

Physicochemical properties and stability of oil-in-water emulsions stabilized by soy protein isolate and xanthan gum

Effect of glycation with three polysaccharides on the structural and emulsifying properties of ovalbumin

Effects of soybean protein isolate − polyphenol conjugate formation on the protein structure and emulsifying properties: Protein − polyphenol emulsification performance in the presence of chitosan

Effects of glycation methods on the interfacial behavior and emulsifying performance of soy protein isolate-gum Arabic conjugates

Highly ordered aggregation of soy protein isolate particles for enhanced gel-related properties through konjac glucomannan addition

Improving gel properties of soy protein isolate through alkaline pH-shifting, mild heat treatment, and TGase cross-linking

Effect of glycosylation and limited hydrolysis on structural and functional properties of soybean protein isolate

Stabilization of O/W emulsions via interfacial protein concentrating induced by thermodynamic incompatibility between sarcoplasmic proteins and xanthan gum

Effect of polysaccharide on structures and gel properties of microgel particle reconstructed soybean protein isolate/polysaccharide complex emulsion gels as solid fat mimetic

Assessment of Soy Protein Acid Hydrolysate—Xanthan Gum Mixtures on the Stability, Disperse and Rheological Properties of Oil-in-Water Emulsions

Effects of Sequential Enzymolysis and Glycosylation on the Structural Properties and Antioxidant Activity of Soybean Protein Isolate

Konjac glucomannan-assisted fabrication of stable emulsion-based oleogels constructed with pea protein isolate and its application in surimi gels

Fabrication and characterization of succinylated and glycosylated soy protein isolate and its self-assembled nanogel

Effect of Lycium barbarum polysaccharides on heat-induced gelation of soy protein isolate

Soybean protein isolate-sodium alginate double network emulsion gels: Mechanism of formation and improved freeze-thaw stability

Development of soy protein isolate emulsion gels as extrusion-based 3D food printing inks: Effect of polysaccharides incorporation

Create Fat Substitute From Soybean Protein Isolate/Konjac Glucomannan: The Impact of the Protein and Polysaccharide Concentrations Formulations

Influence of xanthan gum on properties and stability of oil-in-water Pickering emulsions stabilized by zein colloidal particles