Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Energetic picosecond 10.2-μm pulses generated in a BGGSe crystal for nonlinear seeding of terawatt-class CO2 amplifiers

Energetic picosecond 10.2-μm pulses generated in a BGGSe crystal for nonlinear seeding of terawatt-class CO_2 amplifiers

High-power, mid-infrared, picosecond pulses generated by compression of a CO2 laser beat-wave in GaAs

High energy, single-polarized, single-transverse-mode, nanosecond pulses generated by a multi-stage Yb-doped photonic crystal fiber amplifier

Femtosecond Laser Pumped Conical Emission and Seeded Ring Amplification in Bbo Crystals

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

Generation of 3 mJ, 44 fs, 2.5 micrometer pulses from a single-stage Cr2+:ZnSe amplifier

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

Generation of 100-J Sub-Picosecond Laser Pulse from High Energy Nd:Glass Chirped Pulse Amplification System

A Cavity-Dumped and Regenerative Amplifier System for Generating High-Energy, High-Repetition-rate Picosecond Pulses

Generation of few-cycle radiation pulses in the IR spectral range (1.3 – 2.2 μm) using wide-aperture BBO crystals pumped by a terawatt Ti : sapphire laser

Microjoule Level Femtosecond Optical Pulses with Double-Cladding Fiber-Based Nonlinear Chirped-Pulse Amplification

Gain Measurement of ZnGeP2 Optical Parametric Oscillator Pulses in a High-Pressure CO2 Amplifier

Cascaded nonlinear optical gain modulation for coherent femtosecond pulse generation

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

High-Power, Widely Tunable, Picosecond Coherent Source From Optical Parametric Amplification In Barium Borate

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

Generation of 8-fs and 13-nJ pulse from a Yb-fiber system with nonlinear-pulse-compression

High average power amplification of femtosecond pulses based on the Yb:CaYAlO4 crystal

Generation of femtosecond pulses based on efficient frequency doubling of erbium fiber oscillator-amplifier laser