X-linked anhidrotic ectodermal dysplasia and de novo t(X;1) in a female

J. Limon,J. Filipiuk,B. Nedoszytko,K. Mrózek,M. Castrén,M. Larramendy,J. Roszkiewicz

DOI: https://doi.org/10.1007/BF00200916

1991-07-01

Human Genetics

Abstract:

What problem does this paper attempt to address?

A Capacitive Pressure Sensor with Adjustable Working Range for Deep Sea

Haijun Wang,Dongrui Ruan,Letian Gan,Zihang Shen,Jiangshan Zhuo,Xiangping Chen,Fanghao Zhou,Zheng Jia,Tiefeng Li,Huizhu Hu

DOI: https://doi.org/10.1109/jsen.2024.3464608

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:Pressure sensors have widespread applications across various fields in air and underwater environments. However, the drastic pressure difference makes it hard for pressure sensors to measure air and deep-sea pressure under the same mechanism. In this study, we present a design of a capacitive pressure sensor based on the soft sensing membrane bending deformation to measure air pressure or extreme hydrostatic pressure. A mechanical model was developed to analyze the relationship between the membrane capacitance and the external pressure condition on different compressible mediums of the sensor. By changing the compressible mediums, the deformability of the sensor membrane under load can be modulated, enabling rapid adjustments to the working range of the sensor by at least four to five orders of magnitude. In the experiments, the sensor demonstrated the capability to monitor gas pressures of 1 kPa in air and hydrostatic pressures of 100 MPa (equal to hydrostatic pressure at a depth of 10,000m) in the pressure vessel. With consistent and stable performance across a low-to-high measurement range, this sensor proves versatile for applications such as wind pressure, depth, and environmental pressure measurements.
A Bioinspired Shape Memory Alloy Based Soft Robotic System for Deep‐Sea Exploration

Yi Xu,Jiangshan Zhuo,Mingyu Fan,Xinge Li,Xunuo Cao,Dongrui Ruan,Hejinsheng Cao,Fanghao Zhou,Tuck-Whye Wong,Tiefeng Li

DOI: https://doi.org/10.1002/aisy.202300699

IF: 7.298

2024-01-01

Advanced Intelligent Systems

Abstract:Developing robots integrating sensors, actuators, and computational capabilities for deep‐sea exploration is challenging. Nature often offers innovative solutions to complex problems, and in this context, inspiration is drawn from the remarkable abilities of deep‐sea snails, specifically their unique tentacles, often referred to as “eyestalks” due to the presence of an eye at their tip. Herein, “DeepStalk,” a soft robot designed for deep‐sea exploration, is introduced, utilizing three shape memory alloys (SMAs) springs that mimic the three tentacle flexor muscles of deep‐sea snails. Overall, DeepStalk incorporates sensory, actuation, and control modules for operation under high hydrostatic pressure. To achieve precise control of its orientation in 3D space, a simple and reliable vector‐PID controller is developed. Remarkably, the robot successfully maintains its desired bending attitude even at 30 MPa hydrostatic pressure, achieved through the Joule heating of SMA springs. Furthermore, DeepStalk demonstrates the capability to track moving objects underwater, showcasing its potential application in challenging environments at depths of up to 20 MPa. This marks the first attempt for soft robots to integrate sensor, actuator, and control modules capable of complex tasks under high hydrostatic pressure. This innovative research advances integrated soft robotic systems for deep‐sea exploration field.
Electrostatic Jet Engineering of Flexible Composite Pressure Sensors for Physical Applications

Yanhua Song,Hao Dong,Wenxin Liu,Xiang Fu,Zheng Fu,Peilun Li,Long Chen,Zeeshan Ahmad,Jun Liu,Xing Chen,Ming-Wei Chang

DOI: https://doi.org/10.1021/acsapm.1c01357

2022-01-01

ACS Applied Polymer Materials

Abstract:Design and fabrication of highly sensitive and flexible sensors is an area of intense interest and research but is limited with respect to the detection range and application (e.g., deployment in both terrestrial and aquatic environments). Here, we present flexible pressure sensors (FPSs) comprising graphene-PANI-embedded polyethylene oxide and exhibiting ultralow detection limits. These sensors were prepared using a modified electrohydrodynamic (EHD) jetting method and enabled wearable monitoring of physiological parameters and selective aquatic life activity. Sensor thickness, resistance, and sensitivity were modulated through jetted layers. Through EHD jetting, the minimum detected static pressure was seen to be 12 Pa. The strain resistance test displayed a gauge factor of 5.5 under a bending strain of 12.5-50%. FPS engineering was performed using a green, sustainable, and cost-effective approach and demonstrated high sensitivity, ultralow detection limits, rapid response, and excellent mechanical durability. Detection of minute signals during physical activity (e.g., finger movements, facial expression, cough, hand gestures, acoustic vibrations, and real-time pulse waves of near-body states) was shown. Furthermore, real-time detection of underwater activity elucidates the potential in emerging healthcare, environmental, and bio-related monitoring.
Underwater Biomimetic Lateral Line Sensor Based on Triboelectric Nanogenerator for Dynamic Pressure Monitoring and Trajectory Perception

Jianhua Liu,Peng Xu,Bo Liu,Ziyue Xi,Yuanzheng Li,Linan Guo,Tangzhen Guan,Peng Zhu,Zhaochen Meng,Siyuan Wang,Hao Wang,Minyi Xu

DOI: https://doi.org/10.1002/smll.202308491

IF: 13.3

2023-12-08

Small

Abstract:Drawing inspiration from fish lateral line, this work introduces a triboelectric dynamic pressure sensor designed for underwater sensing. The biomimetic lateral line sensor analyzes electrical signals to obtain motion parameters of moving objects such as robotic fish. Demonstrating remarkable sensitivity and suitability for underwater conditions, this research promises to play a pivotal role in shaping innovative approaches to underwater sensing. Developing desirable sensors is crucial for underwater perceptions and operations. The perceiving organs of marine creatures have greatly evolved to react accurately and promptly underwater. Inspired by the fish lateral line, this study proposes a triboelectric dynamic pressure sensor for underwater perception. The biomimetic lateral line sensor (BLLS) has high sensitivity to the disturbance amplitude/frequency, good adaptability to underwater environments and (relative) low cost. The sensors are deployed at the bottom of the test basin to perceive various moving objects, such as a robotic fish, robotic seal, etc. By analyzing the electrical signal of the sensor, the motion parameters of the objects passed over can be obtained. By monitoring signal variations across multiple sensors, the ability to sense different disturbance movement trajectories, including linear and angular trajectories, is achievable. The study will prove significant in forming an unconventional underwater perceiving method, which can back‐up the sonic/optical sensors when are impaired in complex underwater environments.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Machine-learning-accelerated design of functional structural components in deep-sea soft robots

Shunyu Yin,Zheng Jia,Xinge Li,Jiakai Zhu,Yi Xu,Tiefeng Li

DOI: https://doi.org/10.1016/j.eml.2022.101635

IF: 4.728

2022-01-01

Extreme Mechanics Letters

Abstract:To explore the deepest regions of the ocean with high flexibility and environmental adaptability, deep-sea soft robots have been developed recently. One prominent example is the self-powered soft robot that successfully operated in the Mariana Trench at a depth of 11,000 meters. Notably, many functional electronic components such as resistive elements, capacitors, and crystal oscillators may fail under extreme hydrostatic pressure, posing significant challenges for the practical massive deployment of deep-sea soft robots. Consequently, designing miniature pressure vessels on the printed circuit board to protect these vulnerable electronic components is vital for enhancing the reliability of deep-sea soft robots. However, traditional structure design methods - which often rely on theoretical analysis, experimental testing and numerical simulations - are often costly and time-consuming, especially for design problems in high-dimensional design spaces. Herein, we demonstrate a machine learning-accelerated design method for devising miniature pressure vessels for vulnerable electronic components in deep-sea soft robots. Machine learning algorithms including decision trees and neural network models are employed and compared. The resulting design algorithm can predict whether a specific design can survive the deep-sea hydrostatic pressure with high accuracy in similar to 0.35 ms, roughly seven orders of magnitude faster than traditional design methods. (c) 2022 Elsevier Ltd. All rights reserved.
A new sensor inspired by the lateral-line system of fish using the self-powered d33 mode piezoelectric diaphragm for hydrodynamic sensing

Xingxu Zhang,Xiaobiao Shan,Tao Xie,Jianmin Miao

DOI: https://doi.org/10.1016/j.ymssp.2019.106476

IF: 8.4

2020-07-01

Mechanical Systems and Signal Processing

Abstract:Inspired by the ubiquitous lateral-line system of fish which plays an essential role in flow sensing and object detection, this paper presents a new sensor consisting of a radial field piezoelectric diaphragm in d33 mode and a high aspect ratio pillar. Finite element analysis was conducted to simulate the in-plane poling released by inter-circulating electrodes and the vibration behavior of the sensor. Prototypes were fabricated by microfabrication combined with 3D printing. Impedance spectrums were examined to characterize the dynamic behaviors of the sensor. By utilizing a vibrating sphere to imitate the underwater disturbances, the performance of the sensor in sensing oscillatory flows was tested. Experimental results demonstrate that the sensor has a high sensitivity of 2.476 mV/(mm/s) and very good response ability to the low frequency hydrodynamic flow phenomena. Besides, the ability of the sensor in locating the vibrating sphere was illustrated. This sensor is miniaturized, light-weight, self-powered and low-cost. It provides a good prospect for the underwater sensing of autonomous underwater vehicles.

engineering, mechanical
A Highly Sensitive 3D-Printed Flexible Sensor for Sensing Small Pressures in Deep-Sea High-Pressure Environment

Siqi Hu,Wuxu Zhang,Shengbin Li,Yuwei Wang,Zhiyi Gao,Xiangling Xia,Huiyun Xiao,Qi Zhang,Dan Xu,Feng Xu,Jinyun Liu,Baoru Bian,Yuanzhao Wu,Yiwei Liu,Jie Shang,Run-Wei Li

DOI: https://doi.org/10.1021/acsami.4c10569

IF: 9.5

2024-08-29

ACS Applied Materials & Interfaces

Abstract:The origin of life on Earth is believed to be from the ocean, which offers abundant resources in its depths. However, deep-sea operations are limited due to the lack of underwater robots and rigid grippers with sensitive force sensors. Therefore, it is crucial for deep-sea pressure sensors to be integrated with mechanical hands for manipulation. Here, a flexible stress sensor is presented that can function effectively under high water pressure in the deep ocean. Inspired by biological structures...

materials science, multidisciplinary,nanoscience & nanotechnology
An underwater vest containing an antioxidant MXene hydrogel for sensitive recognition of fish locomotion

Chengxiu Yang,Jiafei Hu,Lihui Liu,Shaowei Wu,Mengchun Pan,Yan Liu,Haomiao Wang,Peisen Li,Qi Zhang,Weicheng Qiu,Huihui Luo

DOI: https://doi.org/10.1038/s41378-024-00675-8

2024-03-22

Microsystems & Nanoengineering

Abstract:Abstract The perception of fish locomotion is important for understanding their adaptive behaviors and ethological characteristics. However, the main strategy used for extracting fish attitudes involves the use of a vision-based monitoring system, which is limited in its range of observation and cannot perform tracking for long times. Here, we report the use of a wearable tagging electronic device, referred to as an underwater vest, to capture the surrounding flow field disturbances triggered by swimming or momentary postural changes. All of these goals were achieved by integrating a pair of pseudocapacitive pressure-sensing units and a flexible circuit board. Notably, additional conditions, such as variable hydraulic pressures and minimal changes in fish posture, require high stability and sensitivity of the sensing units. Thus, hybrid hydrogel electrodes were developed through cross-linking MXene with holey-reduced graphene oxide nanosheets and further modification with 1-ethyl-3-methylimidazolium dicyanamide ionic liquids, which increased the interfacial capacitance and long-term interfacial activity of the MXene. Consequently, the sensing unit exhibited ultrahigh sensitivity ( S max ~136,207 kPa −1 ) in an aquatic environment for 60 days and superior high-pressure resolution (10 Pa) within a wide working range of 1 MPa. Ultimately, an underwater vest integrated with such sensing units clearly distinguished and recorded fish locomotion. We believe that the designed device may open avenues in flow field monitoring and ocean current detection and provide new insights into the development of sensitive underwater tagging.

nanoscience & nanotechnology,instruments & instrumentation
Hydrodynamic pressure sensing for a biomimetic robotic fish caudal fin integrated with a resistive pressure sensor

Quanliang Zhao,Chao Zhang,Jinghao Chen,Mengying Zhang,Junjie Yuan,Lei Zhao,Jie Zhang,Can Huang,Guangping He

DOI: https://doi.org/10.1088/1748-3190/ad6d21

2024-08-22

Abstract:Micro-sensors, such as pressure and flow sensors, are usually adopted to attain actual fluid information around swimming biomimetic robotic fish for hydrodynamic analysis and control. However, most of the reported micro-sensors are mounted discretely on body surfaces of robotic fish and it is impossible to analyzed the hydrodynamics between the caudal fin and the fluid. In this work, a biomimetic caudal fin integrated with a resistive pressure sensor is designed and fabricated by laser machined conductive carbon fibre composites. To analyze the pressure exerted on the caudal fin during underwater oscillation, the pressure on the caudal fin is measured under different oscillating frequencies and angles. Then a model developed from Bernoulli equation indicates that the maximum pressure difference is linear to the quadratic power of the oscillating frequency and the maximum oscillating angle. The fluid disturbance generated by caudal fin oscillating increases with an increase of oscillating frequency, resulting in the decrease of the efficiency of converting the kinetic energy of the caudal fin oscillation into the pressure difference on both sides of the caudal fin. However, perhaps due to the longer stability time of the disturbed fluid, this conversion efficiency increases with the increase of the maximum oscillating angle. Additionally, the pressure variation of the caudal fin oscillating with continuous different oscillating angles is also demonstrated to be detected effectively. It is suggested that the caudal fin integrated with the pressure sensor could be used for sensing thein situflow field in real time and analyzing the hydrodynamics of biomimetic robotic fish.
A Pressure Sensory System Inspired by the Fish Lateral Line: Hydrodynamic Force Estimation and Wall Detection

Yiming Xu,K. Mohseni

DOI: https://doi.org/10.1109/JOE.2016.2613440

IF: 3.883

2017-07-01

IEEE Journal of Oceanic Engineering

Abstract:Studies have shown that many behavioral decisions of fish are facilitated by the lateral line system which provides hydrodynamic information about the surrounding fluid. Inspired by the functionality of the system, a distributed pressure sensory system is developed. The system is intended for use on autonomous underwater vehicles to aid station keeping and accurate maneuvering by allowing the vehicle to react to the changes in the fluid environment before they result in body perturbation. The system can also be used for mission level decision making such as obstacle detection. This paper presents a prototype sensory system using differential, as opposed to absolute or gauge, pressure sensors as the sensing elements, which allows for higher measurement precision. Experimental tests are designed to characterize the system's ability to estimate the hydrodynamic force and to detect the presence of a wall. The hydrodynamic force estimated by the system is validated with an independent force measuring apparatus. The impending wall could also be detected by analyzing the pressure distribution obtained from the sensory system. Particularly, it is found that the wall distance and angle may be inferred by comparing the amplitude and phase of the Fourier components in the pressure distribution against those without the obstacle.

Engineering,Environmental Science
Maximized Hydrodynamic Stimulation Strategy for Placement of Differential Pressure and Velocity Sensors in Artificial Lateral Line Systems

Zhen Yang,Zheng Gong,Yonggang Jiang,Yueri Cai,Zhiqiang Ma,Xin Na,Zihao Dong,Deyuan Zhang

DOI: https://doi.org/10.1109/lra.2022.3143203

IF: 5.2

2022-04-01

IEEE Robotics and Automation Letters

Abstract:Fish can perceive the surrounding flow field using their lateral line systems, consisting of canal neuromasts (CNs) for flow pressure gradient perception and superficial neuromasts (SNs) for flow velocity detection. Although various artificial lateral line (ALL) systems have been developed inspired by the lateral line of fish, few studies have combined both pressure and velocity sensors for hydrodynamic perception, and how to optimize sensor placement remains unanswered, particularly on three-dimensional models. Herein we proposed a maximized hydrodynamic stimulation strategy for sensor placement optimization. We built a fish model and designed an ALL system by mimicking the geometry of a blind cavefish, Sinocyclocheilus tianlinensis. Differential pressure sensors and hot-film flow velocity sensors were used to mimic the CNs and SNs, respectively, with optimized sensor placement. The simulation and experimental results on yaw angle detection suggested that both sensor placement of our ALL system and distribution of the biological lateral line showed good agreement with the maximized hydrodynamic stimulation strategy. Our ALL system could detect a wall within a distance of 0.1 body length, comparable to the perception ability of cave fish. The new sensor placement strategy can be used to equip ALL systems on bionic robotic fish and other underwater vehicles.

robotics
High-resolution Quasi-Distributed Temperature and Pressure Sensing System for Deep-Sea Reservoir Monitoring

Xiangge He,Shangran Xie,Lijuan Gu,Fei Liu,Min Zhang,Hailong Lu

DOI: https://doi.org/10.1016/j.measurement.2022.111568

IF: 5.6

2022-01-01

Measurement

Abstract:The ocean contains rich oil and gas resources such as natural gas hydrate and there is an urgent need to develop tools for in-situ and continuous monitoring of the reservoir with a high resolution in the mining and development procedure. Here we report a state-of-the-art quasi-distributed temperature and pressure sensing system targeting at reservoir monitoring in deep-sea environment. The system contains a quasi-distributed temperature sensing cable, an optical-fiber-based pressure gauge and an interrogator. The temperature sensing cable contains in total 32 fiber Bragg gratings (FBGs) covering a sensing length of similar to 120 m. The cabled FBG sensor array has been calibrated during its on-site installation in seawater showing a measurement accuracy of +/- 0.05 degrees C along with a resolution of 0.009 degrees C. An unique Fabry-Perot cavity structure and an optimized demodulation algorithm are designed to realize the pressure gauge, achieving a pressure sensitivity as high as 142.3 nm/MPa, corresponding to a pressure measurement accuracy of +/- 1.6 kPa, together with a temperature cross-sensitivity as low as 1.2 kPa/degrees C. A tailored sealing procedure is presented to achieve a pressure resistance up to 30 MPa for the entire sensing system, corresponding to an accessible depth of 3000 m underwater. The proposed sensing system demonstrates its ability to continuously track temperature and pressure variation in sea water, representing as an advanced toolkit for energy resources monitoring in marine condition and for deep-sea exploration.
Soft, Flexible Pressure Sensors for Pressure Monitoring Under Large Hydrostatic Pressure and Harsh Ocean Environments

Yi Li,Andres Villada,Shao-Hao Lu,He Sun,Jianliang Xiao,Xueju Sophie Wang

DOI: https://doi.org/10.1039/d3sm00563a

IF: 4.046

2023-06-25

Soft Matter

Abstract:Traditional rigid ocean pressure sensors typically require protection from bulky pressure chambers and complex seals to survive the large hydrostatic pressure and harsh ocean environment. Here we introduce soft, flexible pressure sensors that can eliminate such need and measure a wide range of hydrostatic pressure (0.1 MPa to 15 MPa) in environments that mimic the ocean, achieving small size, high flexibility, and potentially low power consumption. The sensors are fabricated from lithographically patterned gold thin films (100 nm thick) encapsulated with a soft Parylene C film and tested in a customized pressure vessel with well-controlled pressure and temperature conditions. Using a rectangular pressure sensor as an example, the resistance of the sensor is found to decrease linearly with the increase of the hydrostatic pressure from 0.1 MPa to 15 MPa. Finite element analysis (FEA) reveals the strain distribution in the pressure sensor under hydrostatic pressure of up to 15 MPa. The effect of geometry on sensor performance is also studied, and symmetric pressure sensors (like circular and spike-shaped) are shown to have more uniform strain distributions under large hydrostatic pressure and, therefore, a potentially enhanced pressure measurement range. Pressure sensors of all geometries show high consistency and negligible hysteresis over 15 cyclic tests. In addition, the sensors exhibit excellent flexibility and operate reliably under a hydrostatic pressure of 10 MPa for up to 70 days. The developed soft pressure sensors are promising for integration with many platforms including animal tags, diver equipment, and soft underwater robotics.

polymer science,chemistry, physical,materials science, multidisciplinary,physics
High-Pressure Sensor With High Sensitivity and High Accuracy for Full Ocean Depth Measurements

Ting Li,Haiping Shang,Bing Wang,Chaomin Mao,Weibing Wang

DOI: https://doi.org/10.1109/jsen.2022.3144467

IF: 4.3

2022-03-01

IEEE Sensors Journal

Abstract:Ocean depth measurement is very important for ocean observation, prediction and development. In this work, an absolute piezoresistive pressure sensor with high sensitivity and high accuracy for full ocean depth measurement is designed and fabricated through theoretical calculations and simulations. The shape and dimension of the diaphragm are designed through finite element simulation. A thick circular C-type diaphragm is used and the stress distribution on the diaphragm is simulated. The influence of the shape, dimension and position of the piezoresistors on the sensitivity and nonlinearity is calculated and analyzed, and the performance of sensors with single-bar-shaped piezoresistors and sensors with meander-shaped piezoresistors with different spacing is further compared. A tri-meanders-shaped piezoresistor with a large ratio of piezoresistance to connecting layer resistance is designed, and the piezoresistor position with high linearity is determined through simulation. Non-glue oil-filled isolation package is used to improve the repeatability and hysteresis of the sensor. The pressure sensor has a range of 0–120 MPa, a sensitivity of 0.425 mV/V/MPa, and an accuracy of 0.0182 %FS.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
A Durable and Self-Powered Triboelectric Sensor for Hydraulic Pressure Monitoring and Underwater Disturbance Detection

Weichen Wang,Cong Zhao,Zhaoyang Wang,Baijin Mao,Haoyu Wang,Yiping Zhang,Ziyue Xi,Cheng Xiang,Minyi Xu,Juntian Qu

DOI: https://doi.org/10.1109/jsen.2024.3395970

IF: 4.3

2024-06-19

IEEE Sensors Journal

Abstract:Enhancing marine sensory capabilities is a crucial pathway to advance human understanding of the oceans. Triboelectric nanogenerators (TENGs), known for their high-quality self-powered sensing properties, present a novel solution for underwater sensing. In this article, we introduce a new hydraulic pressure TENG (HP-TENG) structure designed specifically for HP measurements. When the external HP changes, the slider slides along the cylinder shell and the contact area between the fluorinated ethylene propylene (FEP) film and the aluminum (AI) electrodes changes, thus generating the electrical signal. The electromechanical performance characteristics of the HP-TENG are experimentally measured. Through underwater experiments, we validate the ability of HP-TENG to measure water pressure and demonstrate its ability to perceive the magnitude of pressure and the speed of pressure change with a linear correlation coefficient greater than 0.995. Furthermore, we provide insights into its applications in real-time control and underwater disturbance detection to demonstrate its utility. The sensor has the advantages of low production cost, self-powered, environmentally friendly, high sensitivity to environmental disturbances (0.954 V/N), good mechanical reliability, and electrical stability. The experimental results indicate that the proposed sensor exhibits promising potential for environmental monitoring, emphasizing its utility in enhancing ocean perception for underwater robots.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Piezoresistive foam sensor arrays for marine applications

Jeff E. Dusek,Michael S. Triantafyllou,Jeffrey H. Lang

DOI: https://doi.org/10.1016/j.sna.2016.07.025

2016-09-01

Abstract:Spatially-dense pressure measurements are needed on curved surfaces in marine environments to provide marine vehicles with the detailed, real-time measurements of the near-field flow necessary to improve performance through flow control. To address this challenge, a waterproof and conformal pressure sensor array comprising carbon black-doped-silicone closed-cell foam (CBPDMS foam) was developed for use in marine applications. The response of the CBPDMS foam sensor arrays was characterized underwater using periodic hydrodynamic pressure stimuli from vertical plunging and surface water waves, from which a piecewise polynomial calibration was developed to describe the sensor response. Inspired by the distributed pressure and velocity sensing capabilities of the fish lateral line, the CBPDMS foam sensor arrays have significant advantages over existing commercial sensors for distributed flow reconstruction and control. Experimental results have shown the sensor arrays to have sensitivity underwater on the order of 5Pa, dynamic range of 50–500Pa; are contained in a waterproof and completely flexible package, and have material cost less than $10 per sensor.
Interface Deformable, Thermally Sensitive Hydrogel–Elastomer Hybrid Fiber for Versatile Underwater Sensing

Chengmin Wang,Baohu Wu,Shengtong Sun,Peiyi Wu

DOI: https://doi.org/10.1002/admt.202000515

IF: 6.8

2020-11-09

Advanced Materials Technologies

Abstract:Underwater sensing plays a vital role in perceiving various hydrodynamic stimuli for underwater operations, while fishes evolve an adaptable, durable, and multifunctional lateral line sensory system to feel mechanical deformations from nearly all sources as well as water temperature changes. Such perfect integration of multiple functions into one biological system poses a great challenge for artificial soft sensors. Here, by constructing a stretchable and water‐proof core‐cladding hydrogel–elastomer hybrid optical fiber, nearly all the underwater sensations of fish lateral lines can be realized with unprecedented sensing stability. High‐refractive‐index salt, LiBr, is introduced to the hydrogel core to enable long‐range light propagation with a low loss coefficient (≈0.32 dB cm−1), and the dissimilar yet tightly adhered hydrogel–elastomer interface is readily deformable, contributing to the ultrasensitive optical response to subtle environmental stimulations, induced by either motions, hydrostatic pressure variations, ultrasonic/audible sound waves, or water flows. Moreover, the optical loss of the hybrid fiber is linearly responsive to wide temperature changes (5–70 °C), caused by the altered light scattering from hydrogel chain clustering. The present elastomer–hydrogel hybrid optical fiber offers a new designing strategy in developing next‐generation underwater stretchable ray‐optic sensors.

materials science, multidisciplinary
A MEMS flow sensor based on fish lateral line sensing system

Lihua Guo,Kuiwei Xu,Jingmin Li,Chong Liu

DOI: https://doi.org/10.1007/s00542-020-05156-2

2021-02-01

Microsystem Technologies

Abstract:The artificial lateral line is a bionic sensor developed in recent years to detect physical parameters of gas and liquid flow field, which has great application prospects in underwater target detection, microfluidic velocity detection and smart skin. However, these sensors generally have only one kinocilium, resulting in inability to identify directions. Moreover, the kinocilium exposed directly in fluid shows performance of low sensitivity. This paper presents a flexible, lightweight, and sensitive piezoresistive sensor inspired by lateral line. The sensor presented comprises a cluster of micropillars arranged in stepwise distribution to detect fluid direction and a hydrogel cap to realize high-sensitive and low-speed threshold detection. The experiment of direction detection shows that the output signal in inhibitory direction of the sensor is smaller than the signal in excitatory direction and lagging behind, which can be used in orientation identification. The results show that the sensitivity of the sensor without hydrogel cap is 0.57 mV/(mm/s), while the sensor with hydrogel cap is 1.18 mV/(mm/s), which indicates that the hydrogel cap can increase the sensitivity by 107%. The sensor developed in this paper has a broad application prospect in biomedicine devices and micro-fluid equipment.
Underwater Source Localization Using an Artificial Lateral Line System With Pressure and Flow Velocity Sensor Fusion

Yonggang Jiang,Zheng Gong,Zhen Yang,Zhiqiang Ma,Chunxuan Wang,Yanjie Wang,Deyuan Zhang

DOI: https://doi.org/10.1109/tmech.2021.3062869

2022-02-01

IEEE/ASME Transactions on Mechatronics

Abstract:Mimicking fish lateral line for hydrodynamic sensing, various artificial lateral line systems have been developed for underwater robotics. However, previous studies of artificial lateral line systems for underwater source localization were based on a single sensing modality of either pressure or flow velocity. Inspired by the functions of flow and pressure receptors of fish, in this article, we developed an artificial lateral line system integrated with pressure sensors and flow velocity sensors. A dual-sensor fusion modality was proposed to locate near-field dipole source by measuring hydrodynamic signals. A multilayer perceptron neural network was constructed to process the pressure and flow velocity signals and to predict near-field dipole coordinates in two and three dimensions. In a 2-D plane, compared with a single pressure- or velocity-sensing modality, the dual-sensor fusion modality reduced the mean localization error by 30%. In a 3-D space, the mean localization error based on the dual-sensor fusion modality was approximately 0.1 body lengths, when considering a source located within one body length from the artificial lateral line. In addition, we studied the influence of the number of sensors on the localization accuracy via analysis of variance. Our experimental results indicated that the bio-inspired dual-sensor fusion modality is beneficial for improving the performance of artificial lateral line systems for underwater source localization.
A Hydrogel-Based Self-Sensing Underwater Actuator

Shuyu Wang,Zhaojia Sun,Shuaiyang Duan,Yuliang Zhao,Xiaopeng Sha,Shifeng Yu,Lei Zuo

DOI: https://doi.org/10.3390/mi13101779

IF: 3.4

2022-10-20

Micromachines

Abstract:Soft robots made of hydrogels are suited for underwater exploration due to their biocompatibility and compliancy. Yet, reaching high dexterity and actuation force for hydrogel-based actuators is challenging. Meanwhile, real-time proprioception is critical for feedback control. Moreover, sensor integration to mimic living organisms remains problematic. To address these challenges, we introduce a hydrogel actuator driven by hydraulic force with a fast response (time constant 0.83 s). The highly stretchable and conductive hydrogel (1400% strain) is molded into the PneuNet shape, and two of them are further assembled symmetrically to actuate bi-directionally. Then, we demonstrate its bionic application for underwater swimming, showing 2 cm/s (0.19 BL/s) speed. Inspired by biological neuromuscular systems' sensory motion, which unifies the sensing and actuation in a single unit, we explore the hydrogel actuator's self-sensing capacity utilizing strain-induced resistance change. The results show that the soft actuator's proprioception can monitor the undulation in real-time with a sensitivity of 0.2%/degree. Furthermore, we take a finite-element method and first-order differential equations to model the actuator's bending in response to pressure. We show that such a model can precisely predict the robot's bending response over a range of pressures. With the self-sensing actuator and the proposed model, we expect the new approach can lead to future soft robots for underwater exploration with feedback control, and the underlying mechanism of the undulation control might offer significant insights for biomimetic research.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied

X-linked anhidrotic ectodermal dysplasia and de novo t(X;1) in a female

A Capacitive Pressure Sensor with Adjustable Working Range for Deep Sea

A Bioinspired Shape Memory Alloy Based Soft Robotic System for Deep‐Sea Exploration

Electrostatic Jet Engineering of Flexible Composite Pressure Sensors for Physical Applications

Underwater Biomimetic Lateral Line Sensor Based on Triboelectric Nanogenerator for Dynamic Pressure Monitoring and Trajectory Perception

Machine-learning-accelerated design of functional structural components in deep-sea soft robots

A new sensor inspired by the lateral-line system of fish using the self-powered d33 mode piezoelectric diaphragm for hydrodynamic sensing

A Highly Sensitive 3D-Printed Flexible Sensor for Sensing Small Pressures in Deep-Sea High-Pressure Environment

An underwater vest containing an antioxidant MXene hydrogel for sensitive recognition of fish locomotion

Hydrodynamic pressure sensing for a biomimetic robotic fish caudal fin integrated with a resistive pressure sensor

A Pressure Sensory System Inspired by the Fish Lateral Line: Hydrodynamic Force Estimation and Wall Detection

Maximized Hydrodynamic Stimulation Strategy for Placement of Differential Pressure and Velocity Sensors in Artificial Lateral Line Systems

High-resolution Quasi-Distributed Temperature and Pressure Sensing System for Deep-Sea Reservoir Monitoring

Soft, Flexible Pressure Sensors for Pressure Monitoring Under Large Hydrostatic Pressure and Harsh Ocean Environments

High-Pressure Sensor With High Sensitivity and High Accuracy for Full Ocean Depth Measurements

A Durable and Self-Powered Triboelectric Sensor for Hydraulic Pressure Monitoring and Underwater Disturbance Detection

Piezoresistive foam sensor arrays for marine applications

Interface Deformable, Thermally Sensitive Hydrogel–Elastomer Hybrid Fiber for Versatile Underwater Sensing

A MEMS flow sensor based on fish lateral line sensing system

Underwater Source Localization Using an Artificial Lateral Line System With Pressure and Flow Velocity Sensor Fusion

A Hydrogel-Based Self-Sensing Underwater Actuator