Abstract:Compliant leg function found during bouncy gaits in humans and animals can be considered a role model for designing and controlling bioinspired robots and assistive devices. The human musculoskeletal design and control differ from distal to proximal joints in the leg. The specific mechanical properties of different leg parts could simplify motor control, e.g., by taking advantage of passive body dynamics. This control embodiment is complemented by neural reflex circuitries shaping human motor control. This study investigates the contribution of specific passive and active properties at different leg joint levels in human hopping at different hopping frequencies. We analyze the kinematics and kinetics of human leg joints to design and control a bioinspired hopping robot. In addition, this robot is used as a test rig to validate the identified concepts from human hopping. We found that the more distal the joint, the higher the possibility of benefit from passive compliant leg structures. A passive elastic element nicely describes the ankle joint function. In contrast, a more significant contribution to energy management using an active element (e.g., by feedback control) is predicted for the knee and hip joints. The ankle and knee joints are the key contributors to adjusting hopping frequency. Humans can speed up hopping by increasing ankle stiffness and tuning corresponding knee control parameters. We found that the force-modulated compliance (FMC) as an abstract reflex-based control beside a fixed spring can predict human knee torque-angle patterns at different frequencies. These developed bioinspired models for ankle and knee joints were applied to design and control the EPA-hopper-II robot. The experimental results support our biomechanical findings while indicating potential robot improvements. Based on the proposed model and the robot's experimental results, passive compliant elements (e.g. tendons) have a larger capacity to contribute to the distal joint function compared to proximal joints. With the use of more compliant elements in the distal joint, a larger contribution to managing energy changes is observed in the upper joints.

Design of Low-Cost Modular Bio-Inspired Electric-Pneumatic Actuator (EPA)-Driven Legged Robots

Designing Synergistic Walking of a Humanoid Single Leg Driven by Pneumatic Artificial Muscles: an Empirical Study

Diaphragm Ankle Actuation for Efficient Series Elastic Legged Robot Hopping

An Open Torque-Controlled Modular Robot Architecture for Legged Locomotion Research

Deep Reinforcement Learning Based Co-Optimization of Morphology and Gait for Small-Scale Legged Robot

Bionic Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Additive Manufacturing and Topology Optimization

Electrohydraulic musculoskeletal robotic leg for agile, adaptive, yet energy-efficient locomotion

A Study of a Compliant Hydraulic Actuator for Running Robots

Design of a biped robot actuated by pneumatic artificial muscles

Design and Characterization of 3D Printed, Open-Source Actuators for Legged Locomotion

Design and Optimization of a Planar Biped Leg Based on Direct Drive Linear Actuators

Role of compliant mechanics and motor control in hopping - from human to robot

Design and Control of a Pneumatic Musculoskeletal Biped Robot

A Novel Optimization Design of Dual-Slide Parallel Elastic Actuator for Legged Robots

Design and Operation Analysis of a New Biped Mechanism.

Effective Locomotion at Multiple Stride Frequencies Using Proprioceptive Feedback on a Legged Microrobot

Design and Fabrication of Soft Locomotion Robots based on Spatial Compliant Mechanisms

Modular crawling robots using soft pneumatic actuators

Design, Kinematics, and Application of Axially and Radially Expandable Modular Soft Pneumatic Actuators

A Passive Hydraulic Auxiliary System Designed for Increasing Legged Robot Payload and Efficiency

Development of modular multi-degree-of-freedom hybrid joints and robotic flexible legs via fluidic elastomer actuators