Endocrine and immunologic studies in a patient with resistant ovary syndrome.

L. Talbert,M. Raj,M. Hammond,T. Greer

DOI: https://doi.org/10.1016/s0015-0282(16)48200-2

IF: 6.7

1984-11-01

Fertility and Sterility

Abstract:

What problem does this paper attempt to address?

The effect of first and second premolar extractions on third molars: A retrospective longitudinal study

A Miclotte,B Grommen,M Cadenas de Llano-Pérula,A Verdonck,R Jacobs,G Willems

DOI: https://doi.org/10.1016/j.jdent.2017.03.007

Abstract:Objectives: To analyse the effect of first and second premolar extractions on eruption space for upper and lower third molars and on third molar position and angulation during orthodontic treatment. Methods: The sample consisted of 296 patients of which 218 patients were orthodontically treated without extraction and 78 patients with extraction of first or second premolars. The eruption space for third molars was measured on pre- and posttreatment lateral cephalograms, whereas the angulation, vertical position, the relation with the mandibular canal and the mineralization status of third molars were evaluated using pre- and posttreatment panoramic radiographs. All data were statistically analyzed. Results: The increase in eruption space and the change in vertical position of upper and lower third molars significantly differed between patients treated with and without premolar extractions, whereas the change in angulation, relationship with the mandibular canal and mineralization status of the third molars did not significantly differ between patients treated with and without premolar extractions. Conclusions: The retromolar space and the position of third molars significantly change during orthodontic treatment in growing patients. Premolar extractions have a positive influence on the eruption space and vertical position of third molars, whereas they do not influence the angular changes of third molars. Due to the retrospective character of the study, these conclusions should be carefully considered. Further prospective research is necessary for better insights into this complex topic. Clinical significance: This study stresses the importance of considering the possible effects of orthodontic treatment on third molars during treatment planning.
Effect of orthodontic extraction of mandibular premolars on third molar angulation after treatment with fixed appliances

Papageorgiou, Spyridon N.

DOI: https://doi.org/10.1007/s00056-023-00465-3

2023-04-01

Journal of Orofacial Orthopedics

Abstract:Purpose Orthodontic treatment involving premolar extractions might improve the angulation of lower third molars, which are the teeth most often impacted. This study analyzes the impact of first/second lower premolar extraction during orthodontic therapy on the angulation of mandibular third molars. Methods A total of 120 patients treated non-extraction ( n = 40), with extraction of first ( n = 40), or second lower premolars ( n = 40) were included. The mesiodistal angulation of lower third molars relative to the adjacent tooth and their developmental stage were evaluated from posttreatment orthopantomograms. Between-group differences were statistically evaluated at a significance level of 0.05. Results The orthopantomograms of 120 patients (51% female) with a median age of 15.2 years at the time of debonding were evaluated after a mean treatment duration time of 2.9 years. No difference ( P > 0.05) was seen between the average angulation of the lower third molars of the right (mean = 24.4°, standard deviation [SD] 13.6°) and the left side (mean = 23.6°, SD 14.1°). No differences in the angulation of the lower third molar were found between the non-extraction and extraction groups for the right ( P = 0.44) or the left side ( P = 0.22). Likewise, no differences were found when comparing the first and second premolars for the right ( P = 0.26) or the left side ( P = 0.10). Premolar extraction was associated with an advanced root development stage of the right third molar (odds ratio 7.1; 95% confidence interval 1.1–48.1; P = 0.04), with no differences between extraction of the first or second premolar ( P = 0.10). Conclusion Orthodontic treatment involving premolars extractions might be associated with a small acceleration in root development, but not with the angulation, of lower third molars.
Changes in the arch width and buccal corridor after fixed orthodontic treatment with Damon self-ligating system: premolar extraction vs. non-extraction

Sarah Bühling,Sabrina Schmied,Sara Eslami,Silvia Brandt,Nicolas Plein,Stefan Kopp,Babak Sayahpour,SAYAHPOUR,Babak

DOI: https://doi.org/10.1590/2177-6709.29.3.e2423159.oar

2024-07-09

Dental Press Journal of Orthodontics

Abstract:Bühling, Sarah ; Schmied, Sabrina ; Eslami, Sara ; Brandt, Silvia ; Plein, Nicolas ; Kopp, Stefan ; Sayahpour, Babak ; Introduction: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. Objective: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. Material and Methods: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. Results: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). Conclusion: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.
Influence of orthodontic treatment with premolar extraction on the spatial position of maxillary third molars in adult patients: a retrospective cohort cone-bean computed tomography study

Fangwei Pan,Zhentao Yang,Jian Wang,Ruilie Cai,Jialing Liu,Chenghao Zhang,Wen Liao

DOI: https://doi.org/10.1186/s12903-020-01314-0

2020-11-11

BMC Oral Health

Abstract:Abstract Background Based on low-dose radiation Cone-bean computed tomography (CBCT) images, This study aims to establish a space coordinate system, which offers more precise and comparable evaluation on changes of maxillary third molars influenced by orthodontic treatment with premolar extraction in adults. The system suggests promising application prospect in future studies related to CBCT superimposition and evaluation for its feasibility and efficiency. Methods Forty-nine maxillary third molars from 27 patients (mean age, 20.78 years) were included. CBCT images were obtained before and after orthodontic treatment with premolars extracted (mean treatment duration, 31.47 months). The changes in the position, angulation, and rotation of the third molars were evaluated with a space coordinate system using four landmarks: anterior nasal spine (ANS), posterior nasal spine (PNS), left and right orbitales. Results After orthodontic treatment, the third molars moved forward (adjusted mean, 1.44 mm) ( p < 0.001) and downward (adjusted mean, 2.87 mm) ( p < 0.001) accompanied by outward rotation of the crowns (adjusted mean, 5.38°) ( p = 0.001), while changes in angulation were insignificant. Conclusions This was the first study to systematically investigate the spatial position change of maxillary third molars in adult patients who received orthodontic treatment with premolar extraction. During the process, maxillary third molars moved downward and forward accompanied by outward rotation of the crowns. Orthodontists should take tooth movement potential into consideration when making extraction plans.

dentistry, oral surgery & medicine
[Three-Dimension Model Analysis for Physiological Drift of the Mandibular Dentition after Extraction of Mandibular Second Premolars of Angle Class II Patients].

Song Wei,Jing Li,Yan-heng Zhou

DOI: https://doi.org/10.3969/j.issn.1671-167x.2013.01.017

2013-01-01

Abstract:OBJECTIVE:To observe the self-adjustment of the mandibular dental arch after extraction of the second mandibular premolars. METHODS:Mandibular dental casts of 20 Angle class II patients treated with extraction of lower second premolars and upper first premolars, bonded with Alexander appliance,were taken before (T1) and after self-adjustment (T2). All the casts were laser scanned, Little index, curve of Spee, arch width, arch length and extraction spaces of casts were digitally measured and analyzed with SPSS 16.0. RESULTS:Little index,lower molar width, lower arch length and extraction spaces were reduced [(12.70±3.28) mm vs.(8.82±2.69) mm, P<0.001;(41.21±2.48) mm vs.(40.54±2.23) mm, P<0.001; (24.63±3.19) mm vs.(22.12±2.97) mm, P<0.001;(8.06±0.48) mm vs.(4.17±1.51) mm, P<0.001;(8.13±0.95) mm vs.(4.14±1.98) mm, P<0.001],while the curve of Spee and anterior lower arch length were increased significantly[(2.14±0.75) mm vs.(2.65±0.88) mm, P<0.05; (15.88±2.86) mm vs.(17.55±2.33) mm, P<0.05]. Width between lower canines remained the same[(27.25±2.69) mm vs.(27.26±1.73) mm, P>0 .05]. CONCLUSION:Severe crowding and Angle class II molar relationship could be successfully relived with lower second premolar extraction followed by self-adjustment.
Spatial and angular alterations in the dental arch after premature loss of primary molars: Immediate and 9-month computed tomography evaluation

Ruchika Kundra,Deepak Sharma,Ravneet Kaur,Suneet Monga,Shuchi Duvedi

DOI: https://doi.org/10.4103/jisppd.jisppd_86_24

2024-07-01

Abstract:Background: Contemporary imaging methods and quickly advancing technologies have increased the number of diagnostic tools available in medicine and orthodontics. The current study aimed to determine three-dimensional (3D) space changes that occurred after the extraction of either the maxillary or mandibular primary molars during the mixed dentition period. Materials and methods: The present study was a longitudinal split-mouth study with a study group and a control group. The sample consisted of 20 children aged between 6 and 9 years. Clinical examination, radiological analysis, and 3D digital images of the plaster casts were used sequentially to gather all the data. The dental cast measurements recorded were arch width, arch length, hemi-perimeter, dental space at the extraction site, and angulation of the first permanent molar. The children were recalled for follow-up after 9 months, and all dental cast measurements were repeated using nondestructive 3D computed tomography software. For repeated measurements, the test applied was a paired t-test, and for independent samples, the test was a Student's t-test. Results: A significant decrease in arch width (P = 0.001), arch length (P < 0.001), hemi-perimeter (P < 0.001), D-space (P < 0.001), and E-space (P = 0.001) was observed following extraction. A significant increase in angulation measurements was observed (P = 0.001). Conclusion: The study revealed a comparative reduction in mandibular arch width, a reduction in arch length in both the maxilla and the mandible, a reduced hemi-perimeter of dental arches, loss of dental extraction space, and a change in angulation of the erupted first permanent molars following premature loss of the primary molar.
The effect of orthodontic treatment with first premolar extraction on eruption of mandibular third molar: a cone beam CT study

任少毓,谷岩

DOI: https://doi.org/10.3760/cma.j.cn115797-20220328-22308

2022-01-01

Abstract:Objective:To evaluate the changes of mandibular third molars influenced by orthodontic treatment with first premolar extraction and analyze influencing factors of its angulation changes.Methods:This is a retrospective cohort study and a total of 40 patients with 68 mandibular third molar were included. Three-dimensional software was used for evaluating position and angulation of mandibular third molar. Paired t-tests and Wilcoxon tests were performed to compare treatment changes and multiple regression analysis were later processed to find influencing factors about angulation changes. Results:The third molars moved forward (1.59±3.35) mm ( P=0.012) with 10.24°±18.82° ( P<0.001) angulation changes after orthodontic treatment. The ANB angle, the mandibular plane angle, the distance from the central pit of third molar to horizontal plane and the angle between second and third molar long axis before treatment and changes of retromolar space didn't make a significant difference in angulation changes of third molar ( F=2.153, P=0.071). Conclusions:Mandibular third molar moved forward and the angulation changes of mandibular third molar increased after first premolar extraction. Orthodontists should be aware of that during making treatment plans.
Chemical sensors based on SPR in a Plastic Optical Fiber: Simultaneous detection of Fe(III) and Cu(II)

N. Cennamo,L. Zeni,G. Alberti,R. Biesuz,G. D’Agostino,D. Merli,M. Pesavento,A. Profumo

DOI: https://doi.org/10.1109/FOTONICA.2014.6843896

2014-05-12

Abstract:In this work we present a multichannel chemical sensor based on Surface Plasmon Resonance (SPR) in a Plastic Optical Fiber (POF), for the detection of metal ions. The SPR sensing platform was realized removing the cladding of a plastic optical fiber along half circumference, spin coating on the exposed core a buffer of Microposit S1813 photoresist, and finally sputtering a thin gold film by using a sputtering machine. The planar gold layer can be employed for the preparation of a Self Assembled Monolayer (SAM) with specific binding receptor. In the present study two different ligands for Fe(III) and Cu(II) are linked on the gold surface obtaining two SAM-POF sensors.
Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage

Heon-Mook Park,Byoung-Ho Kim,Il-Hyung Yang,Seung-Hak Baek

DOI: https://doi.org/10.4041/kjod.2012.42.6.280

2012-01-01

The Korean Journal of Orthodontics

Abstract:OBJECTIVE: This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients.METHODS: CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis.RESULTS: Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05).CONCLUSIONS: In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.
Three-dimensional Analysis of the Physiologic Drift of Adjacent Teeth Following Maxillary First Premolar Extractions

Fei Teng,Fei-Yu Du,Hui-Zhong Chen,Ruo-Ping Jiang,Tian-Min Xu

DOI: https://doi.org/10.1038/s41598-019-51057-4

IF: 4.6

2019-01-01

Scientific Reports

Abstract:We assessed the three-dimensional (3D) pattern of the physiologic drift of the remaining adjacent teeth after premolar extraction due to orthodontic reasons and the associated factors. Data were collected from 45 patients aged 17.04 ± 5.14 years who were scheduled to receive a fixed appliance after maxillary premolar extraction. Seventy-five drift models were obtained and digitalized via 3D scanning. The average physiologic drift duration was 81.66 ± 70.03 days. Angular and linear changes in the first molars, second premolars, and canines were measured using the 3D method. All the examined teeth had tipped and moved towards the extraction space, leading to space decreases. Posterior teeth primarily exhibited significant mesial tipping and displacement, without rotation or vertical changes. All canine variables changed, including distal inward rotation and extrusion. The physiologic drift tended to slow over time. Age had a limited negative effect on the mesial drift of posterior teeth, whereas crowding had a limited positive effect on canine drift. Thus, the mesial drift of molars after premolar extraction may lead to molar anchorage loss, particularly among younger patients. The pattern of the physiologic drift of maxillary canines can help relieve crowding and facilitate labially ectopic canine alignment, whereas canine drift is accelerated by more severe crowding.
Assessment of Maxillary Third Molar Status Before and After Orthodontic Treatment in Adolescent Patients

DOI: https://doi.org/10.37358/rc.19.12.7762

2020-01-19

Revista de Chimie

Abstract:Third maxillary molar prediction for impaction and eruption should be part of the orthodontic treatment planning. In our study we evaluated the reliability of some linear and angular measurements used for the assessment of maxillary third molar status by comparing them before and after orthodontic treatment. 208 upper third molars were analyzed, 148 at patients who undergone non extraction orthodontic treatment and 60 at patients where first premolar extractions were performed.We analyzed on orthopantomograms taken at the beginning and at the end of the orthodontic the ratio between the dimension of the retromolar space and the mesio distal diameter of the third molar, the angle between the long axis of third molar and the occlusal plane and the angle between the long axis of the second and third maxillary molars. We found significant changes in retromolar space dimension after orthodontic treatment with premolars removal and slight average increase in the non extraction group. We didn’t find significant statistical differences before and after orthodontic treatment neither between the angulations of the maxillary third molar with the occlusal plane, nor with the second upper molar (p>0.05) in both groups. The conclusion is that the type of orthodontic treatment has little or no influence upon third molar angulation and this parameter can be used as a predictive factor for third molar status from the beginning of the orthodontic treatment. Keywords: third maxillary molar; retromolar space; angulation
Upper Airway Changes After Orthodontic Extraction Treatment In Adults: A Preliminary Study Using Cone Beam Computed Tomography

jingjing zhang,gui chen,weiran li,tianmin xu,xuemei gao

DOI: https://doi.org/10.1371/journal.pone.0143233

IF: 3.7

2015-01-01

PLoS ONE

Abstract:ObjectiveWhether the orthodontic treatment with premolar extraction and maximum anchorage in adults will lead to a narrowed upper airway remains under debated. The study aims to investigate the airway changes after orthodontic extraction treatment in adult patients with Class II and hyperdivergent skeletal malocclusion.Materials and MethodsThis retrospective study enrolled 18 adults with Class II and hyperdivergent skeletal malocclusion (5 males and 13 females, 24.1 +/- 3.8 years of age, BMI 20.33 +/- 1.77 kg/m(2)). And 18 untreated controls were matched 1: 1 with the treated patients for age, sex, BMI, and skeletal pattern. CBCT images before and after treatment were obtained. DOLPHIN 11.7 software was used to reconstruct and measure the airway size, hyoid position, and craniofacial structures. Changes in the airway and craniofacial parameters from pre to post treatment were assessed by Wilcoxon signed rank test. Mann-Whitney U test was used in comparisons of the airway parameters between the treated patients and the untreated controls. Significant level was set at 0.05.ResultsThe upper and lower incisors retracted 7.87 mm and 6.10 mm based on the measurement of U1-VRL and L1-VRL (P < 0.01), while the positions of the upper and lower molars (U6-VRL, and L6-VRL) remained stable. Volume, height, and cross-sectional area of the airway were not significantly changed after treatment, while the sagittal dimensions of SPP-SPPW, U-MPW, PAS, and V-LPW were significantly decreased (P < 0.05), and the morphology of the cross sections passing through SPP-SPPW, U-MPW, PAS, and V-LPW became anteroposteriorly compressed (P < 0.001). No significant differences in the airway volume, height, and cross-sectional area were found between the treated patients and untreated controls.ConclusionsThe airway changes after orthodontic treatment with premolar extraction and maximum anchorage in adults are mainly morphological changes with anteroposterior dimension compressed in airway cross sections, rather than a decrease in size.
Effect of four premolar extractions on the vertical dimension of the face : A retrospective cephalometric study

Anna Rüedi,Spyridon N Papageorgiou,Theodore Eliades,Vasiliki Koretsi

DOI: https://doi.org/10.1007/s00056-022-00418-2

Abstract:Purpose: Adequate control of the vertical dimension is of great importance in orthodontic treatment. Although existing evidence is very limited, extraction of four premolars is thought to contribute towards improved control of anterior facial height compared with non-extraction treatment protocols. Thus, the aim of this retrospective cohort study was to compare the effect of fixed-appliance treatment with extraction of four premolars to non-extraction treatment on the skeletal vertical dimension. Methods: A consecutive sample of 76 children with skeletal hyperdivergence (49% male; mean age 11.9 years) was divided into two groups for treatment with either non-extraction (n = 31) or extraction of four premolars (n = 45). Baseline characteristics were comparable: overjet 5.1 ± 2.5 mm, overbite 2.4 ± 1.9 mm, ANB angle 4.6 ± 2.3°, and SN-ML angle 40.2 ± 3.5°. Patients were treated with standard edgewise fixed appliances with closing loops/sliding mechanics. Vertical skeletal and dental outcomes were measured on lateral cephalograms before and after treatment. Data were analyzed with linear regression at 5%. Results: Compared to non-extraction treatment, treatment with premolar extractions had no significant effect on the SN-ML angle (difference (Δ) = 0.07°; 95% confidence interval -0.90 to 1.01°; P = 0.88). Statistically significant changes between the extraction and non-extraction groups were only found for the parameters SNA (Δ -1.47°; P = 0.003), ANB (Δ -1.17°; P = 0.004), SN-OP (Δ -1.48°; P = 0.04), and L1-ML (Δ -6.39°; P < 0.001). Conclusion: Orthodontic treatment of children with skeletal hyperdivergence using systematic extraction of four premolars had minimal effects on the vertical facial dimension compared to non-extraction treatment.
The effect of dental restoration geometry and material properties on biomechanical behaviour of a treated molar tooth: A 3D finite element analysis

Behzad Babaei,Paul Shouha,Victor Birman,Paul Farrar,Leon Prentice,Gangadhara Prusty

DOI: https://doi.org/10.1016/j.jmbbm.2021.104892

Abstract:Objectives: To test the hypothesis that restoration of class II mesio-occlusal-distal (MOD) cavities can be strengthened through judicious choice of restoration geometry and material properties. Methods: An intact extracted human maxillary molar tooth was digitized, segmented, reconstructed, and four 3D restored tooth models were developed with four different restoration geometries: one straight, one single-curved, and two double-curved. Stress analysis was conducted for representative loading using finite element analysis, and maximum principal stresses were determined at the dentine-enamel and restoration-enamel junctions. A range of restorative material elastic moduli (5-80 GPa) and Poisson's ratios (0.25-0.35) were studied. Vertical loads of 400 N were applied on occlusal points, while the roots of the molar teeth, below the crevices, were supported in all directions. All the materials were modelled as homogeneous, isotropic, and elastic. Results: The maximum principal stresses at the restoration-enamel junctions were strongly dependent on the MOD restoration geometries. Peak stresses occurred along the palatal surface of the restoration rather than the opposite buccal surface. Double-curved restorations showed the lowest peak stress at restoration-enamel junctions. Choice of the mechanical properties of restorative material in the range of 5-35 GPa further reduced stress concentrations on the enamel. Significance: Class II MOD restorations may be stronger if designed with double-curved marginal geometries that can reduce stress concentrations. Designs with convex and concave geometries were particularly effective because they reduced stress concentrations dramatically. Results suggest that relatively minor changes to the geometry of a restoration can have a substantial effect on stress at the restoration-enamel junction and motivate future experimental analysis.
Changes in the alveolar bone thickness of maxillary incisors after orthodontic treatment involving extractions — A systematic review and meta-analysis

María Domingo-Clérigues,José-María Montiel-Company,José-Manuel Almerich-Silla,Verónica García-Sanz,Vanessa Paredes-Gallardo,Carlos Bellot-Arcís,M Domingo-Clerigues,JM Montiel-Company,JM Almerich-Silla,V Garcia-Sanz,V Paredes-Gallardo,C Bellot-Arcis

DOI: https://doi.org/10.4317/jced.55434

2019-01-01

Journal of Clinical and Experimental Dentistry

Abstract:BACKGROUND: Orthodontic treatment involving en-masse retraction of incisors following premolar extractions, may induce morphological alterations of the alveolar bone surrounding the anterior teeth.OBJECTIVE: To assess changes in alveolar bone thickness around the incisors of extraction patients measured with CBCT.MATERIAL AND METHODS: An electronic search was conducted in PubMed, Scopus, Embase and Cochrane Library, using search terms, with no limitation on publication date, up to April 2018. The articles selected for analysis included randomized controlled trials, case-control studies and cohort studies of patients treated with fixed appliances and premolar extractions, which had measured alveolar bone thickness with CBCT before and after treatment. Changes in bone thickness were calculated and the heterogeneity of the studies was assessed using the I2 and Cochran's Q tests.RESULTS: Of the 136 articles identified in the initial search, 19 were related to the review subject. After removing a further 14 that did not meet the inclusion criteria, 5 articles were selected for analysis. All five were retrospective studies of medium quality. The main changes in alveolar bone thickness were found in the labial cervical third of the central incisor, presenting increases of 0.4-0.64 mm. On the palatal side the results varied considerably.CONCLUSIONS: A significant increase in alveolar bone thickness occurs in the labial cervical third of the central incisor. These changes may be influenced by incisor position and inclination, the orthodontic technique and mechanics employed, the timing of the final CBCT scan and the bone remodeling capacity during en-masse retraction. Key words:Cone-beam computed tomography, alveolar bone, orthodontics.
Changes in Third Molar Angulations After First Premolar Extractions During Fixed Orthodontic Treatment

Dr. Ala'a Dawood Mahmood

DOI: https://doi.org/10.32828/mdj.v6i4.485

2018-03-27

Mustansiria Dental Journal

Abstract:To evaluate the effects of first premolar extraction on third molar angulation during fixed orthodontic treatment.Panoramic radiographs of 40 patients treated orthodontically by fixed appliances were evaluated for change in third molar angulation. Twenty patients were treated by extraction of first premolars, whereas the other 20 patients were treated nonextraction. The change in upper and lower third molars angulation, relative to the occlusal plane and adjacent second molars, were obtained by subtracting post- treatment from pre- treatment values.Statistically significant change in the angulation of both upper and lower third molars, relative to the occlusal plane and second molars, were found in the extraction group as compared to nonextraction group.The extraction of first premolars during orthodontic treatment significantly improved the angulation of third molars toward uprightening.
Third molar angulation changes in Class II div I malocclusion subjects treated with extraction of four premolars: A retrospective study

Keerthan Shashidhar,Chrysl Karishma Castelino,M N Kuttappa,Rohit A Nair,Crystal Runa Soans,Harikrishnan S Nair,MN Kuttappa,ChryslKarishma Castelino,RohitA Nair,CrystalRuna Soans,HarikrishnanS Nair

DOI: https://doi.org/10.4103/jispcd.JISPCD_342_19

2020-09-29

Journal of International Society of Preventive and Community Dentistry

Abstract:Aim: The aim of this study was to assess the changes in maxillary and mandibular third molar inclinations in individuals with class II div 1 malocclusion, before and after orthodontic treatment with extraction of all four first premolars. Materials and Methods: This retrospective study consisted of the pretreatment and posttreatment records of 30 patients that were obtained from the archives of the department of orthodontics and dentofacial orthopedics in A B Shetty Memorial Institute of Dental Sciences. The maxillary third molar's relation to the palatal plane and the mandibular third molar's relation to the mandibular plane were measured. The paired t test was used to calculate pre- and posttreatment changes. A value of P < 0.05 was considered to be statistically significant. Results: The maxillary third molars showed a mean correction of 6.15° ( P < 0.001) and the mandibular third molars showed a mean correction of 5.10° ( P < 0.001). Conclusion: Maxillary third molars showed more uprighting when compared to the mandibular third molars and that both maxillary and mandibular third molars showed an improvement in their angulations to their respective planes after extraction of the first premolars. However, the results of the study cannot be analyzed to state if the third molars do become fully functional.
Three-Dimensional Evaluation of Condylar Position and Joint Spaces Following Orthodontic Treatment With Quadruple Premolar Extractions

Kaiyang Xue,Qingran Li,Sihan Yang,Yuxiang Zhao,Jiawei Li,Chenghao Zhang,Wen Liao

DOI: https://doi.org/10.7759/cureus.67176

2024-08-19

Cureus

Abstract:This study aimed to assess the alterations in the temporomandibular joint among adult patients undergoing orthodontic treatment involving the extraction of four premolars. A cohort of 44 adults, with a mean age of 24.2 years, underwent orthodontic therapy that included quadruple premolar extractions. Cone-beam computed tomography scans were performed before and after the treatment to evaluate the temporomandibular joints. The three-dimensional assessment focused on the condylar position relative to the cranial base and the articular fossa, the axial condylar rotation, and the joint spaces. Notably, a significant posterior shift of the condyle was detected (P≤0.01), averaging a 0.41mm retraction. The posterior joint space narrowed by 0.32mm post-treatment. Additionally, a medial tilt of 0.62° in the condyle's long axis was observed in the frontal plane. No significant changes were recorded for the other condylar positions, rotations, or joint space dimensions. The findings suggest that orthodontic treatment with four premolar extractions may instigate condylar repositioning and rotation. These insights can inform refinements in treatment protocols.
Bearing Account-able Witness to the Ethical Algorithmic System

D. Neyland

DOI: https://doi.org/10.1177/0162243915598056

2016-01-01

Abstract:This paper explores how accountability might make otherwise obscure and inaccessible algorithms available for governance. The potential import and difficulty of accountability is made clear in the compelling narrative reproduced across recent popular and academic reports. Through this narrative we are told that algorithms trap us and control our lives, undermine our privacy, have power and an independent agential impact, at the same time as being inaccessible, reducing our opportunities for critical engagement. The paper suggests that STS sensibilities can provide a basis for scrutinizing the terms of the compelling narrative, disturbing the notion that algorithms have a single, essential characteristic and a predictable power or agency. In place of taking for granted the terms of the compelling narrative, ethnomethodological work on sense-making accounts is drawn together with more conventional approaches to accountability focused on openness and transparency. The paper uses empirical material from a study of the development of an “ethical,” “smart” algorithmic videosurveillance system. The paper introduces the “ethical” algorithmic surveillance system, the approach to accountability developed, and some of the challenges of attempting algorithmic accountability in action. The paper concludes with reflections on future questions of algorithms and accountability.
Effect of Premolar Extraction on the Upper Airway in Adult and Adolescent Orthodontic Patients: a Meta-analysis

Run Zhi Guo,Lin Wei Li,Li Wen Zhang,Qian Yao Yu,Yi Ping Huang,Wei Ran Li

DOI: https://doi.org/10.3290/j.cjdr.b3978679

2023-01-01

Abstract:Objective: To analyse the effects of premolar extraction on the upper airway in adult and ado-lescent orthodontic patients using CBCT. Methods: The Embase, Web of Science, Cochrane Library and Medline (via PubMed) databases were searched with no language restrictions. Longitudinal studies in which CBCT was applied to assess the effects of tooth extraction on the upper airway were included in the analysis. Two authors performed the study selection, methodological quality assessment, data extraction and data synthesis independently. Results: A total of 12 studies were included, six of which were eligible for quantitative synthe-sis. In the adult group, the nasopharynx and oropharynx volume showed no significant change, and the minimum cross-sectional area of the upper airway demonstrated a non-significant decrease compared to the non-extraction group. In the adolescent group, the nasopharynx volume, oropharynx volume and minimum cross-sectional area of the upper airway increased in a non-significant manner.Conclusion: The currently available evidence indicates that tooth extraction does not increase the risk of airway collapse in adult and adolescent patients. The present findings should be interpreted with caution and evaluated in further high-quality studies.

Endocrine and immunologic studies in a patient with resistant ovary syndrome.

The effect of first and second premolar extractions on third molars: A retrospective longitudinal study

Effect of orthodontic extraction of mandibular premolars on third molar angulation after treatment with fixed appliances

Changes in the arch width and buccal corridor after fixed orthodontic treatment with Damon self-ligating system: premolar extraction vs. non-extraction

Influence of orthodontic treatment with premolar extraction on the spatial position of maxillary third molars in adult patients: a retrospective cohort cone-bean computed tomography study

[Three-Dimension Model Analysis for Physiological Drift of the Mandibular Dentition after Extraction of Mandibular Second Premolars of Angle Class II Patients].

Spatial and angular alterations in the dental arch after premature loss of primary molars: Immediate and 9-month computed tomography evaluation

The effect of orthodontic treatment with first premolar extraction on eruption of mandibular third molar: a cone beam CT study

Chemical sensors based on SPR in a Plastic Optical Fiber: Simultaneous detection of Fe(III) and Cu(II)

Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage

Three-dimensional Analysis of the Physiologic Drift of Adjacent Teeth Following Maxillary First Premolar Extractions

Assessment of Maxillary Third Molar Status Before and After Orthodontic Treatment in Adolescent Patients

Upper Airway Changes After Orthodontic Extraction Treatment In Adults: A Preliminary Study Using Cone Beam Computed Tomography

Effect of four premolar extractions on the vertical dimension of the face : A retrospective cephalometric study

The effect of dental restoration geometry and material properties on biomechanical behaviour of a treated molar tooth: A 3D finite element analysis

Changes in the alveolar bone thickness of maxillary incisors after orthodontic treatment involving extractions — A systematic review and meta-analysis

Changes in Third Molar Angulations After First Premolar Extractions During Fixed Orthodontic Treatment

Third molar angulation changes in Class II div I malocclusion subjects treated with extraction of four premolars: A retrospective study

Three-Dimensional Evaluation of Condylar Position and Joint Spaces Following Orthodontic Treatment With Quadruple Premolar Extractions

Bearing Account-able Witness to the Ethical Algorithmic System

Effect of Premolar Extraction on the Upper Airway in Adult and Adolescent Orthodontic Patients: a Meta-analysis