Abstract:Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/FeIII/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO4•- and HO• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

Tailoring d-band center of high-valent metal-oxo species for pollutant removal via complete polymerization

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Rethinking strategies to attenuate organic pollutants: Mechanisms and challenges of catalytic pollutants polymerization

Transformative Removal of Aqueous Micropollutants into Polymeric Products by Advanced Oxidation Processes

Regulating the Metal–Support Interaction: Double Jump to Reach the Efficiency Apex of the Fe–N4-Catalyzed Fenton-like Reaction

Long-lasting organics removal via •OH adsorbed transition metal flocs: Electron transfer-mediated H-bond and van der Waals force

Highly efficient and selective organic pollutants degradation via peroxymonosulfate activation over micron-sized Co-MOF: Nearly 100% singlet oxygen mechanism

Nanoconfined Cu Clusters-Activated Peroxodisulfate for Efficient Wastewater Decontamination Via Polymerization

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers

Single-atom sites in metal–N 4 configuration for efficient abatement of refractory organic pollutants via Fenton-like reaction

Metal Oxyhalide-Based Heterogeneous Catalytic Water Purification with Ultralow H2O2 Consumption

Enhanced peroxymonosulfate activation by δ-MnO 2 nanocatalyst enriched with oxygen vacancies for phenolic pollutants polymerization

Hierarchical porous metal-organic frameworks/polymer microparticles for enhanced catalytic degradation of organic contaminants

Interfacial anchoring cobalt species mediated advanced oxidation: Degradation performance and mechanism of organic pollutants

Dual metal Co-anchored nanosheets to catalyze advanced oxidation processes for highly efficient oxytetracycline degradation

Cu/Mn–ZnO nanoparticles with dual-reaction centers (DRCs) induced peroxymonosulfate (PMS) activation for refractory organic compounds catalytic degradation

Selective removal of phenolic contaminants for carbon recycling by activated persulfate based on oxidative polymerization mechanism

Rational Regulation of Co-N-C Coordination for High-Efficiency Generation of 1O2 toward Nearly 100% Selective Degradation of Organic Pollutants.

Promotion of Single-Electron Transfer by Low-Coordinated Co Single Atoms to Facilitate Advanced Oxidation Processes in Wastewater Treatment

Unraveling timescale-dependent Fe-MOFs crystal evolution for catalytic ozonation reactivity modulation

Rational Regulation of Peroxymonosulfate Activation over Porous Co3O4 with Carbon Coating to Boost Utilization Efficiency of Peroxymonosulfate and Achieve Rapid Removal of Pollutants.