Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

In situ retention of lignin-rich bamboo green effectively improves the surface properties of flattened bamboo

A Novel Bamboo–Wood Composite Utilizing High-Utilization, Easy-to-Manufacture Bamboo Units: Optimization of Mechanical Properties and Bonding Performance

Bamboo, Soybean And Corn As Resources For Green Composites

Production, Environmental Impact and Mechanical Properties of Glubam

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Glue Laminated Bamboo (GluBam) for Structural Applications

Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo

Study on Bamboo Longitudinal Flattening Technology

Bamboo flattening technique: a literature and patent review

Functionalized flattened bamboo board: In-situ immersion assembly of flame-retardant, waterproof and anti-mold composite coatings

High strength, superior fire retardancy, and dimensional stability of cellulosic hybrids

Sustainable high-strength and dimensionally stable composites through in situ regulation and reconstitution of bamboo-derived lignin and hemicellulose contents

Properties and bonding interface characteristics of an innovative bamboo flattening and grooving unit (BFGU) for laminated bamboo lumber

High-performance bamboo composites based on the chemical bonding of active bamboo interface and chitosan

Processing Bulk Natural Bamboo into a Strong and Flame-Retardant Composite Material

High overall performance transparent bamboo composite via a lignin-modification strategy

Tunable Physical-Mechanical Properties of Eco-Friendly and Sustainable Processing Bamboo Self-Bonding Composites by Adjusting Parenchyma Cell Content

Green synthesis of binder-free plate from waste bamboo based on hydrothermal treatment

Laccase-catalyzed octadecylamine modification enables green and stable hydrophobization of bamboo

Synergistic in-situ reinforcement of lignin and adhesive for high-performance aligned bamboo fibers composites

A green and eco-friendly method to enhance Bamboo flame resistance via calcium alginate assisted in-situ mineralization of hydroxyapatite