Investigating the combustion behaviour of various wood species via their fire gases

A. Lingens,E. Windeisen,G. Wegener

DOI: https://doi.org/10.1007/s00226-004-0271-3

2005-01-15

Wood Science and Technology

Abstract:

What problem does this paper attempt to address?

A Methodology to Diagnose Transformer Faults Based on Principal Components Analysis and Artificial Neural Network

Yu Du,Zhiwu Wang,Guangming Feng,Shaowei Rao,Guoping Zou,Shiyou Yang

DOI: https://doi.org/10.1109/ei256261.2022.10117337

2022-01-01

Abstract:A methodology, combining the principal components analysis (PCA) and the artificial neural network (ANN), to diagnose transformer faults based on dissolved gas analysis (DGA) data is proposed. The main features extracted from DGA data by the PCA are used as the input of the ANN to train and test the classifier. The proposed methodology is tested with practical transformer fault data. The test results show that a higher diagnosis accuracy can be achieved by using the main features extracted by the PCA as compared to that by the original features or the optimal feature combinations obtained by feature selection methods.
Research On Neural Network Fault Diagnosis Method Based On Dga For Large Transformer

Cao Jian,Qian Suxiang,Yang Shixi,Hu Hongsheng

2007-01-01

Abstract:By researching the fundamental of DGA (Dissolved Gas Analysis) and fault characteristic of large transformer, analyzing the disadvantage of traditional method of large transformer fault diagnosis and utilizing the ability of function approximation and classification of Radial Basis Function neural network, the paper tries to establish a large transformer fault diagnosis model using Radial Basis Function neural network based on DGA theory In this model. Compared with the traditional method, three-ratio method which lacks of fault coding and no fault types with coding existent, the method proposed here overcome the disadvantage of the Three-ratio method and the related experiment results are more corrective, so it has comparatively good practical value in the future.
Fault Diagnosis of Power Transformers Using ANN and SMOTE Algorithm

Shaowei Rao,Guoping Zou,Shiyou Yang,Shoaib Ahmed Khan

DOI: https://doi.org/10.3233/jae-210227

2022-01-01

International Journal of Applied Electromagnetics and Mechanics

Abstract:An artificial neural network (ANN) based methodology to diagnose transformer faults is proposed. The synthetic minority over-sampling technique (SMOTE) is used to solve the imbalance in the dataset. The SMOTE is improved by introducing a full cycle of creating synthetic samples from minority class samples for the goals that the over-sampled ratio can be automatically determined and the sample size of each category can be completely consistent. The contents of dissolved gases in transformer oils are treated as the original features. The optimal features combination for ANN is determined by comparing the performances of the ANN when different feature combinations are used. The performances of different activation functions used in the ANN are investigated to give the optimal one. The tested results show the high accuracy (97.92%) of the proposed methodology if the optimum feature combination and activation function are used.
Neural networks and particle swarm for transformer oil diagnosis by dissolved gas analysis

Fettouma Guerbas,Youcef Benmahamed,Youcef Teguar,Rayane Amine Dahmani,Madjid Teguar,Enas Ali,Mohit Bajaj,Shir Ahmad Dost Mohammadi,Sherif S. M. Ghoneim

DOI: https://doi.org/10.1038/s41598-024-60071-0

IF: 4.6

2024-04-24

Scientific Reports

Abstract:The lifetime of power transformers is closely related to the insulating oil performance. This latter can degrade according to overheating, electric arcs, low or high energy discharges, etc. Such degradation can lead to transformer failures or breakdowns. Early detection of these problems is one of the most important steps to avoid such failures. More efficient diagnostic systems, such as artificial intelligence techniques, are recommended to overcome the limitations of the classical methods. This work deals with diagnosing the power transformer insulating oil by analysis of dissolved gases using new techniques. For this, we have proposed intelligent techniques based on Multilayer artificial neural networks (ANN). Thus, a multi-layer ANN-based model for fault detection is presented. To improve its classification rate, this one was optimized by a meta-heuristic technique as the particle swarm optimization (PSO) technique. Optimized ANNs have never been used in transformer insulating oil diagnostics so far. The robustness and effectiveness of the proposed model is demonstrated, and high accuracy is obtained.

multidisciplinary sciences
A Methodology to Diagnose Transformer Faults Based on the Multi-Objective Optimization and the Case-Based Reasoning

Shaowei Rao,Guoping Zou,Shiyou Yang

DOI: https://doi.org/10.1080/15325008.2023.2204869

IF: 1.276

2023-01-01

Electric Power Components and Systems

Abstract:There exists a complicated mapping relationship between the types of transformer faults and the compositions and concentrations of dissolved gases in transformer oil. A methodology based on multi-objective optimization and case-based reasoning (CBR) is proposed to diagnose transformer faults by analyzing the dissolved gas analysis data. Considering the characteristics of the features used in the transformer diagnosis model, the targeted improvements are made in the preprocessing phase of the features to protect the diversities of samples. The quality of the feature subset is quantified by the internal cross-validation based on the CBR, and the feature subset is optimized by NSGA-II, considering both the classification performance and the size of the feature subset. The effect of the algorithm parameters on the performance is investigated, and the results validate the robustness of the proposed methodology. The proposed methodology is applied to diagnose cases from the IEC TC 10 database, achieving a 100% fault type recognition accuracy and a 92.6% severity evaluation accuracy.
Power transformer faults diagnosis using undestructive methods (Roger and IEC) and artificial neural network for dissolved gas analysis applied on the functional transformer in the Algerian north-eastern: a comparative study

Bouchaoui Lahcene,Kamel Eddine Hemsas,Hacene Mellah,saad eddine benlahneche

DOI: https://doi.org/10.20998/2074-272X.2021.4.01

2021-08-02

Abstract:Nowadays, power transformer aging and failures are viewed with great attention in power transmission industry. Dissolved gas analysis (DGA) is classified among the biggest widely used methods used within the context of asset management policy to detect the incipient faults in their earlier stage in power transformers. Up to now, several procedures have been employed for the lecture of DGA results. Among these useful means, we find Key Gases, Rogers Ratios, IEC Ratios, the historical technique less used today Doernenburg Ratios, the two types of Duval Pentagons methods, several versions of the Duval Triangles method and Logarithmic Nomograph. Problem. DGA data extracted from different units in service served to verify the ability and reliability of these methods in assessing the state of health of the power transformer. Aim. An improving the quality of diagnostics of electrical power transformer by artificial neural network tools based on two conventional methods in the case of a functional power transformer at Sétif province in East North of Algeria. Methodology. Design an inelegant tool for power transformer diagnosis using neural networks based on traditional methods IEC and Rogers, which allows to early detection faults, to increase the reliability, of the entire electrical energy system from transport to consumers and improve a continuity and quality of service. Results. The solution of the problem was carried out by using feed-forward back-propagation neural networks implemented in MATLAB-Simulink environment. Four real power transformers working under different environment and climate conditions such as: desert, humid, cold were taken into account. The practical results of the diagnosis of these power transformers by the DGA are presented. Practical value.....

Signal Processing,Machine Learning,Systems and Control
Hybrid fuzzy and gated recurrent network based artificial intelligence approach for fault diagnosis and prognosis of transformers using dissolved gas analysis

R. Srinivas,S. Natarajan,S. KrishnaVeniK.

DOI: https://doi.org/10.3233/jifs-223592

2023-08-02

Journal of Intelligent & Fuzzy Systems

Abstract:In the electrical energy transmission and distribution sector, power transformers play an important role. Early fault diagnosis and prognosis are essential to ensure continuous operation and also to prepare a proper maintenance schedule based on the requirements. The occurrence of a fault in the transformer will lead to the formation of various gases inside the transformer tank. For fault diagnosis in the transformer, Dissolved Gas Analysis (DGA) is an excellent method. An Artificial Intelligence (AI) based fault diagnosis and prognosis system using dissolved gases in transformer oil is helpful to predict the health state of the transformer well in advance. Hence, based on the fault severity level, the remaining useful life of the transformer, fault type and current state of the transformer can be estimated effectively by imparting AI to the existing system. A Two-Tier Fuzzy Logic Controller (TTFLC) is proposed in this article to find the type of fault and health index (HI) of the transformer. For further fault prognosis, an effective Gated Recurrent Network (GRN) based deep learning enabled future learning estimator is used for predicting the Criticality Index (CI) of the Transformer. The performance of the proposed method is evaluated for both data from the IEEE data set and expert data collected from the southern Tamil Nadu region. The proposed system shows better results even in multivariate, complex process systems. The diagnosis accuracy of the proposed system is obtained as 95.28% and it compared with conventional methods such as Rogers Ratio Method (RRM), Duval Triangle Method (DTM) and Duval Pentagon Method (DPM) and other AI based methods such as Radial Basis Neural Network (RBNN), k-nearest neighbors (KNN). The diagnosis accuracy of other conventional and AI based methods are less than 90% for the collected dataset.

Environmental Science,Engineering,Computer Science
Power Transformer Fault Diagnosis using DGA and Artificial Intelligence

Seyed Javad Tabatabaei Shahrabad,Vahid Ghods,Mohammad Tolou Askari

DOI: https://doi.org/10.2174/2213275912666190212124133

2020-10-18

Recent Advances in Computer Science and Communications

Abstract:Background: Power transformers are one of the most applicable electricity network devices which transmit output power of the generator to the network through increasing voltage and decreasing current. Due to high cost of such devices and cost of disconnecting device upon failure, disconnection and failure of the transformer should be avoided as much as possible. Objective: In addition, in order to increase reliability and reduce maintenance costs, such devices should be monitored constantly. Internal faults ionize and warm up oil and as a result, gases like carbon dioxide, methane, ethane, ethylene and acetylene are produced. Various methods have been proposed for diagnosing fault in power transformers where one of the most well-known methods is dissolved gas analysis (DGA). DGA in oil is one of the effective tools for diagnosing initial faults in transformers. Methods: Common fault detection methods using oil-dissolved gas analysis include Dornemburge, Duval’s triangle, IEC/IEEE standard, key gases and Rogers. In recent years, artificial intelligence like genetic algorithm, fuzzy logic and neural networks have been used to detect faults using DGA. In this paper, support vector machine (SVM) and decision tree are used to detect internal faults in power transformers. Results: By evaluation of the proposed methods, total accuracies of classifiers using SVM and decision tree were 90% and 97.5%, respectively. Conclusion: Decision tree shows better performance and it is suggested as a proper method for obtaining promising results.
A Methodology for Transformer Fault Diagnosis Based on the Feature Extraction from DGA Data

Shaowei Rao,Shiyou Yang,Guoping Zou

DOI: https://doi.org/10.3233/jae-220169

2023-01-01

International Journal of Applied Electromagnetics and Mechanics

Abstract:A methodology to diagnose transformer faults based on dissolved gas analysis (DGA) is proposed. Since a fault is more sensitive to the ratios of gas contents, a general ratio feature extraction framework is proposed to generate a feature subset as the input of the diagnosis model. The feature subset is evaluated by the improved case-based reasoning (CBR) and optimized by using a proposed new algorithm called the k-optimal algorithm (k-OA). The comparison results between the k-OA and the genetic algorithm (GA) show that the k-OA is more efficient in solving such a combinatorial optimization problem. The obtained optimal feature subset is used to diagnose a public transformer fault dataset, and a 92.6% diagnosis accuracy is observed as compared to that of only 85.1% diagnosis accuracy by using the original features.
A Feature Selection and Ensemble Learning Based Methodology for Transformer Fault Diagnosis

Shaowei Rao,Guoping Zou,Shiyou Yang,Sami Barmada

DOI: https://doi.org/10.1016/j.asoc.2023.111072

IF: 8.7

2023-01-01

Applied Soft Computing

Abstract:Dissolved gas analysis (DGA) data are generally used to diagnose a transformer fault. However, the measurement errors in DGA data are inevitable and will affect the accuracy and reliability of the diagnosis results. Nevertheless, so far, only a few efforts have been devoted to addressing this issue. To provide an accurate and stable transformer fault diagnosis system, a feature selection and ensemble learning based methodology is proposed. Firstly, an Overlapping Information Feature Selection (OIFS) method is proposed to select efficient features from the given feature set for classifiers. Secondly, an Intelligent Voting Ensemble Learning (IVEL) method is proposed to generate a diagnosis model based on the feature combination from the OIFS method. The reported test results show that the OIFS method outperforms existing methods in 9 out of 10 tested classifiers. Additionally, the IVEL outperforms three popular ensemble learning methods, including random forest (RF), gradient boosting decision tree (GBDT), and LightGBM, in terms of both accuracy and robustness performances. Finally, the proposed methodology (OIFS-IVEL) is applied to diagnose the transformer faults in the IEC TC 10 database, achieving a 100% accuracy in recognizing fault types and a 92.6 % accuracy in evaluating fault severity.
Application of Dissolved Gas Analysis for Transformer Condition Assessment Using Computational Intelligence

Thembinkosi Benson Lubisi,Jacobus A. Jordaan,Aloys O. Akumu,Agha F. Nnachi

DOI: https://doi.org/10.1109/saupec55179.2022.9730777

2022-01-25

Abstract:Dissolved gas analysis is widely used in the detection of power transformer incipient faults. Presently, the interpretation of the dissolved gases is dependent on an expert's opinion at the power utility in the Republic of South Africa and often limited in the representation of the fault conditions. One of the drawbacks of relying on experts is the probability of error in judgement and diagnosis. Also, there are few experts in the field of transformer condition assessment. This paper aimed at evaluating the performance of the artificial neural network and support vector machine algorithms for the different established gas ratio concentrations methodologies on the Orange platform. To overcome the inaccuracies in these methods, a modified Doernenburg gas ratio method was proposed. Testing the model with a credible dataset of 922 field cases shows that the artificial neural network performed better with the accuracy of 97.5% of correctly predicted faults while the support vector machine is 90.4%. The modified method enhances the accuracy of the decisions in fault identification, thereby indicating a good application prospect in engineering practice.
Discernment of transformer oil stray gassing anomalies using machine learning classification techniques

M. K. Ngwenyama,M. N. Gitau

DOI: https://doi.org/10.1038/s41598-023-50833-7

IF: 4.6

2024-01-04

Scientific Reports

Abstract:This work examines the application of machine learning (ML) algorithms to evaluate dissolved gas analysis (DGA) data to quickly identify incipient faults in oil-immersed transformers (OITs). Transformers are pivotal equipment in the transmission and distribution of electrical power. The failure of a particular unit during service may interrupt a massive number of consumers and disrupt commercial activities in that area. Therefore, several monitoring techniques are proposed to ensure that the unit maintains an adequate level of functionality in addition to an extended useful lifespan. DGA is a technique commonly employed for monitoring the state of OITs. The understanding of DGA samples is conversely unsatisfactory from the perspective of evaluating incipient faults and relies mainly on the proficiency of test engineers. In the current work, a multi-classification model that is centered on ML algorithms is demonstrated to have a logical, precise, and perfect understanding of DGA. The proposed model is used to analyze 138 transformer oil (TO) samples that exhibited different stray gassing characteristics in various South African substations. The proposed model combines the design of four ML classifiers and enhances diagnosis accuracy and trust between the transformer manufacturer and power utility. Furthermore, case reports on transformer failure analysis using the proposed model, IEC 60599:2022, and Eskom (Specification—Ref: 240-75661431) standards are presented. In addition, a comparison analysis is conducted in this work against the conventional DGA approaches to validate the proposed model. The proposed model demonstrates the highest degree of accuracy of 87.7%, which was produced by Bagged Trees, followed by Fine KNN with 86.2%, and the third in rank is Quadratic SVM with 84.1%.

multidisciplinary sciences
A Novel Fault Diagnosis Method for a Power Transformer Based on Multi-Scale Approximate Entropy and Optimized Convolutional Networks

Haikun Shang,Zhidong Liu,Yanlei Wei,Shen Zhang

DOI: https://doi.org/10.3390/e26030186

IF: 2.738

2024-02-23

Entropy

Abstract:Dissolved gas analysis (DGA) in transformer oil, which analyzes its gas content, is valuable for promptly detecting potential faults in oil-immersed transformers. Given the limitations of traditional transformer fault diagnostic methods, such as insufficient gas characteristic components and a high misjudgment rate for transformer faults, this study proposes a transformer fault diagnosis model based on multi-scale approximate entropy and optimized convolutional neural networks (CNNs). This study introduces an improved sparrow search algorithm (ISSA) for optimizing CNN parameters, establishing the ISSA-CNN transformer fault diagnosis model. The dissolved gas components in the transformer oil are analyzed, and the multi-scale approximate entropy of the gas content under different fault modes is calculated. The computed entropy values are then used as feature parameters for the ISSA-CNN model to derive diagnostic results. Experimental data analysis demonstrates that multi-scale approximate entropy effectively characterizes the dissolved gas components in the transformer oil, significantly improving the diagnostic efficiency. Comparative analysis with BPNN, ELM, and CNNs validates the effectiveness and superiority of the proposed ISSA-CNN diagnostic model across various evaluation metrics.

physics, multidisciplinary
Interpreting dissolved gases in transformer oil: A new method based on the analysis of labelled fault data

Arnaud Nanfak,Samuel Eke,Charles Hubert Kom,Ruben Mouangue,Issouf Fofana

DOI: https://doi.org/10.1049/gtd2.12239

2021-06-28

Abstract:In this contribution, a new dissolved gas analysis (DGA) method combining key gases and ratio approaches for power transformer fault diagnostic is presented. It is based on studying subsets and uses the five main hydrocarbon gases including hydrogen (H2), methane (CH4), ethane (C2H6), ethylene (C2H4), and acetylene (C2H2). The proposed method uses 475 samples from the dataset divided into subsets formed from the maximum and minimum(s) concentrations of the whole dataset. It has been tested on 117 DGA sample data and validated on the International Electrotechnical Commission (IEC) TC10 database. The performance of the proposed diagnostic method was evaluated and compared with the following diagnostic methods: IEC ratios method, Duval's triangle (DT), three ratios technique (TRT), Gouda's triangle (GT), and self-organizing map (SOM) clusters. The results found were analysed by computer simulations using MATLAB software. The proposed method has a diagnosis accuracy of 97.42% for fault types, as compared to 93.16% of TRT, 96.58% of GT method, 97.25% of SOM clusters method and 98.29% of DT method. However, in terms of fault severity, the proposed method has a diagnostic accuracy of 90.59% as compared to 78.90% of SOM clusters method, 83.76% of TRT, 88.03% of DT method, and 89.74% of GT method.

engineering, electrical & electronic
Comparison of Surgical Outcomes, Narcotics Utilization, and Costs After an Anterior Cervical Discectomy and Fusion: Stand-alone Cage Versus Anterior Plating.

E. Tabaraee,Junyoung J Ahn,D. Bohl,Michael J. Collins,D. Massel,Khaled Aboushaala,Kern Singh

Abstract:STUDY DESIGN Retrospective cohort analysis of a prospectively maintained registry. OBJECTIVE To compare the surgical outcomes, narcotic utilization, and costs between a stand-alone (SA) cage and anterior plating (AP) with an interbody device for 1-level anterior cervical discectomy and fusion (ACDF). BACKGROUND DATA ACDF with a SA cage has gained popularity as a potential alternative to anterior cervical plating. Few studies have compared the surgical outcomes, narcotic utilization, and costs of ACDF utilizing a SA cage versus AP with an interbody device. METHODS Patients who underwent a primary 1-level ACDF for degenerative spinal pathology between 2010 and 2013 were analyzed. Patients were stratified on the basis of the type of implant system (SA cage vs. AP) and assessed with regard to demographics, comorbidities, smoking, visual analogue scale (VAS) scores (preoperative/postoperative), procedural time, estimated blood loss (EBL), length of hospitalization, complications, reoperations, narcotic consumption, and total costs. Statistical analysis was performed with independent sample T tests for continuous variables and χ analysis for categorical data. An α level of <0.05 denoted statistical significance. RESULTS Of the 93 patients included, 52 (55.9%) underwent an ACDF with a SA cage system. Patient demographics, comorbidity burden, body mass index, smoking status, and preoperative VAS score were similar between cohorts. The SA cohort incurred a significantly lower EBL (P<0.001) than the AP cohort. However, none required a transfusion and the procedural time, length of hospitalization, postoperative VAS score, complication rates, 1-year arthrodesis rate, and reoperation rates were similar between cohorts. Postoperative narcotics consumption and total costs were also similar between groups. CONCLUSIONS Our findings suggest that the SA cage may be associated with a significantly lower EBL, which may not be clinically relevant. Perioperative outcomes, complications, reoperation rates, narcotics consumption in the immediate postoperative period, and total costs may be similar regardless of the instrumentation utilized in a 1-level ACDF.
Deep Machine Learning-Based Asset Management Approach for Oil- Immersed Power Transformers Using Dissolved Gas Analysis

Lan Jin,Dowon Kim,Kit Yan Chan,Ahmed Abu-Siada

DOI: https://doi.org/10.1109/access.2024.3366905

IF: 3.9

2024-03-02

IEEE Access

Abstract:Reliable operation of oil-immersed power transformers is crucial for electrical transmission and distribution networks. However, the aging of high voltage assets including power transformers along with the increasing of load demand have heightened the importance of adopting cost-effective asset management strategies. Dissolved gas analysis (DGA) has been recognized as a valuable diagnostic tool for detecting potential faults and monitoring the condition of oil-immersed power transformers. Traditional offline DGA method involves periodic sampling and laboratory analysis, which often results in delayed detection and response to emerging faults. To address these limitations, online DGA approach has been emerged to provide real-time monitoring and continuous data acquisition. This paper presents a new asset management approach for mineral oil-immersed power transformers by analysing the online DGA data using convolutional neural networks. The proposed approach provides real time solutions to classify emerging fault type and predict transformer health deterioration level with high accuracy. Results show that the accuracy of fault diagnostics of the proposed approach is approximately 87%.

computer science, information systems,telecommunications,engineering, electrical & electronic
Dissolved Gas Analysis and Application of Artificial Intelligence Technique for Fault Diagnosis in Power Transformers: A South African Case Study

Bonginkosi A. Thango

DOI: https://doi.org/10.3390/en15239030

IF: 3.2

2022-11-30

Energies

Abstract:In South Africa, the growing power demand, challenges of having idle infrastructure, and power delivery issues have become crucial problems. Reliability enhancement necessitates a life-cycle performance analysis of the electrical power transformers. To attain reliable operation and continuous electric power supply, methodical condition monitoring of the electrical power transformer is compulsory. Abrupt breakdown of the power transformer instigates grievous economic detriment in the context of the cost of the transformer and disturbance in the electrical energy supply. On the condition that the state of the transformer is appraised in advance, it can be superseded to reduced loading conditions as an alternative to unexpected failure. Dissolved gas analysis (DGA) nowadays has become a customary method for diagnosing transformer faults. DGA provides the concentration level of various gases dissolved, and consequently, the nature of faults can be predicted subject to the concentration level of the gases. The prediction of fault class from DGA output has so far proven to be not holistically reliable when using conventional methods on account of the volatility of the DGA data in line with the rating and working conditions of the transformer. Several faults are unpredictable using the IEC gas ratio (IECGR) method, and an artificial neural network (ANN) has the hindrance of overfitting. Nonetheless, considering that transformer fault prediction is a classification problem, in this work, a unique classification algorithm is proposed. This applies a binary classification support vector machine (BCSVM). The classification precision is not reliant on the number of features of the input gases dataset. The results indicate that the proposed BCSVM furnishes improved results concerning IECGR and ANN methods traceable to its enhanced generalization capability and constructional risk-abatement principle.

energy & fuels
Power Transformer Fault Diagnosis Using Neural Network Optimization Techniques

Vasiliki Rokani,Stavros D. Kaminaris,Petros Karaisas,Dimitrios Kaminaris

DOI: https://doi.org/10.3390/math11224693

IF: 2.4

2023-11-20

Mathematics

Abstract:Artificial Intelligence (AI) techniques are considered the most advanced approaches for diagnosing faults in power transformers. Dissolved Gas Analysis (DGA) is the conventional approach widely adopted for diagnosing incipient faults in power transformers. The IEC-599 standard Ratio Method is an accurate method that evaluates the DGA. All the classical approaches have limitations because they cannot diagnose all faults accurately. Precisely diagnosing defects in power transformers is a significant challenge due to their extensive quantity and dispersed placement within the power network. To deal with this concern and to improve the reliability and precision of fault diagnosis, different Artificial Intelligence techniques are presented. In this manuscript, an artificial neural network (ANN) is implemented to enhance the accuracy of the Rogers Ratio Method. On the other hand, it should be noted that the complexity of an ANN demands a large amount of storage and computing power. In order to address this issue, an optimization technique is implemented with the objective of maximizing the accuracy and minimizing the architectural complexity of an ANN. All the procedures are simulated using the MATLAB R2023a software. Firstly, the authors choose the most effective classification model by automatically training five classifiers in the Classification Learner app (CLA). After selecting the artificial neural network (ANN) as the sufficient classification model, we trained 30 ANNs with different parameters and determined the 5 models with the best accuracy. We then tested these five ANNs using the Experiment Manager app and ultimately selected the ANN with the best performance. The network structure is determined to consist of three layers, taking into consideration both diagnostic accuracy and computing efficiency. Ultimately, a (100-50-5) layered ANN was selected to optimize its hyperparameters. As a result, following the implementation of the optimization techniques, the suggested ANN exhibited a high level of accuracy, up to 90.7%. The conclusion of the proposed model indicates that the optimization of hyperparameters and the increase in the number of data samples enhance the accuracy while minimizing the complexity of the ANN. The optimized ANN is simulated and tested in MATLAB R2023a—Deep Network Designer, resulting in an accuracy of almost 90%. Moreover, compared to the Rogers Ratio Method, which exhibits an accuracy rate of just 63.3%, this approach successfully addresses the constraints associated with the conventional Rogers Ratio Method. So, the ANN has evolved a supremacy diagnostic method in the realm of power transformer fault diagnosis.

mathematics
Assessment of computational intelligence and conventional dissolved gas analysis methods for transformer fault diagnosis

Jawad Faiz,Milad Soleimani

DOI: https://doi.org/10.1109/tdei.2018.007191

IF: 2.509

2018-10-01

IEEE Transactions on Dielectrics and Electrical Insulation

Abstract:Transformers are vital components of power systems as they are situated between energy generation and consumers and their failure disrupts the use of electrical energy. Therefore, diagnosing an incipient fault is essential in avoiding hazardous operating conditions and minimizes downtime cost. In transformers, faults take place due to electrical or thermal stresses that cause insulation decomposition in transformers. In oil-filled transformers, insulations are cellulose and oil, and the products of the insulation decomposition are gases which can be dissolved in the oil. Therefore, dissolved gas analysis (DGA) can be used for fault diagnosis in oil filled transformers. In this paper, DGA interpretation methods, conventional and intelligence, are investigated and compared. For evaluating consistency and accuracy of the methods, “No Result” cases are not considered. It can help the newcomers to this field to have access to a comprehensive comparison about the application of computational intelligence and conventional methods in transformer fault detection using DGA.

engineering, electrical & electronic,physics, applied
Fault Prediction Using a Grey-Markov Model from the Dissolved Gases Contents in Transformer Oils

Liu Yang,Du Yu,Wang Zhiwu,Feng Guangming,Rao Shaowei,Zou Guoping,Yang Shiyou

DOI: https://doi.org/10.1051/e3sconf/202125601038

2021-01-01

E3S Web of Conferences

Abstract:A novel method to predict transformer fault by forecasting the variation trend of the dissolved gases content is proposed. After the content of each feature gas, such as hydrogen and methane, is obtained by the proposed forecasting model, the fault type can be diagnosed by the dissolved gas analysis (DGA) technologies. Firstly, the GM (1,1) grey model with unequal time interval is introduced to generate a general forecasting model for each feature gas. The introduced grey model with unequal time interval will enforce no constrain on the historical measurement data. Consequently, the time intervals of the two adjacent measuring points can be either constant or variant. To address the deficiency that the existing grey model is unable to describe the fluctuation of the predicted object in time domain, the Markov chain is introduced to improve the accuracy of the grey forecasting model. An adaptive method to automatically divide the state space based on the number of states and the relative error of the grey model is presented by using Fibonacci sequences. Practical measurements are used to verify the accuracy of the proposed forecasting model. The numerical results show that there is high probability (86%) that the proposed grey-Markov model acquires a smaller prediction residual as compared to the original GM(1,1) grey model.

Investigating the combustion behaviour of various wood species via their fire gases

A Methodology to Diagnose Transformer Faults Based on Principal Components Analysis and Artificial Neural Network

Research On Neural Network Fault Diagnosis Method Based On Dga For Large Transformer

Fault Diagnosis of Power Transformers Using ANN and SMOTE Algorithm

Neural networks and particle swarm for transformer oil diagnosis by dissolved gas analysis

A Methodology to Diagnose Transformer Faults Based on the Multi-Objective Optimization and the Case-Based Reasoning

Power transformer faults diagnosis using undestructive methods (Roger and IEC) and artificial neural network for dissolved gas analysis applied on the functional transformer in the Algerian north-eastern: a comparative study

Hybrid fuzzy and gated recurrent network based artificial intelligence approach for fault diagnosis and prognosis of transformers using dissolved gas analysis

Power Transformer Fault Diagnosis using DGA and Artificial Intelligence

A Methodology for Transformer Fault Diagnosis Based on the Feature Extraction from DGA Data

A Feature Selection and Ensemble Learning Based Methodology for Transformer Fault Diagnosis

Application of Dissolved Gas Analysis for Transformer Condition Assessment Using Computational Intelligence

Discernment of transformer oil stray gassing anomalies using machine learning classification techniques

A Novel Fault Diagnosis Method for a Power Transformer Based on Multi-Scale Approximate Entropy and Optimized Convolutional Networks

Interpreting dissolved gases in transformer oil: A new method based on the analysis of labelled fault data

Comparison of Surgical Outcomes, Narcotics Utilization, and Costs After an Anterior Cervical Discectomy and Fusion: Stand-alone Cage Versus Anterior Plating.

Deep Machine Learning-Based Asset Management Approach for Oil- Immersed Power Transformers Using Dissolved Gas Analysis

Dissolved Gas Analysis and Application of Artificial Intelligence Technique for Fault Diagnosis in Power Transformers: A South African Case Study

Power Transformer Fault Diagnosis Using Neural Network Optimization Techniques

Assessment of computational intelligence and conventional dissolved gas analysis methods for transformer fault diagnosis

Fault Prediction Using a Grey-Markov Model from the Dissolved Gases Contents in Transformer Oils