Sparse inference of the drift of a high-dimensional Ornstein-Uhlenbeck process

Stéphane Gaïffas,Gustaw Matulewicz

DOI: https://doi.org/10.1016/J.JMVA.2018.08.005

IF: 1.387

2017-07-10

Journal of Multivariate Analysis

Abstract:

What problem does this paper attempt to address?

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin

Talita Tartari,Caroline Wichnieski,Renato Menezes Silva,Ariadne Letra,Marco Antonio Hungaro Duarte,Clovis Monteiro Bramante

DOI: https://doi.org/10.1590/1678-7757-2023-0005

2023-05-26

Abstract:Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2.5% NaOCl + 17% EDTA; G3 - 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 - 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 - mixture 5% NaOCl + 18% etidronate (HEDP); and G6 - mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time.
Bonding Quality of Etch-and-Rinse Adhesives in Root Canals Upon Different Pretreatments.

Jie Xiong,Lipei Shen,Qingsong Jiang,Bin Luo

DOI: https://doi.org/10.3290/j.jad.a41923

2019-01-01

Abstract:PURPOSE:To evaluate the effect of ethanol-wet/hydrophobic resin bonding (EWB) in a simplified dehydration protocol with ultrasonic agitation (UA) of etch-and-rinse adhesives on the bonding quality in root canals.MATERIALS AND METHODS:56 extracted human maxillary central incisors were divided into 4 groups (n = 14) according to the procedures of bonding fiber posts in root canals: A: conventional etch-and-rinse adhesive as control (All-Bond 3, Bisco); B: EWB in a simplified dehydration protocol, ie, after 100% ethanol dehydration (30 s, 3 times), ethanol/hydrophobic resin (50% bis-GMA + TEG-DMA, 50% ethanol) was applied into the root canal as a primer, followed by applying pure co-monomer adhesive; C: EWB in a standard dehydration protocol, ie, ascending concentrations of ethanol (50%, 70%, 80%, 90%) for 30 s and 100% ethanol (30 s, 3 times) for dehydration, with the remaining procedure conducted as in group B; D: EWB in a simplified dehydration protocol under ultrasonic agitation (UA), ie, 100% ethanol under ultrasonic agitation for 30 s, ethanol/hydrophobic resin as a primer applied under UA for 60 s, followed by the application of pure co-monomer adhesive. All the specimens were cemented with Duo-Link (Bisco) and immersed in artificial saliva for 24 h or thermocycled for 10,000 times. Bond strength, failure mode, and nanoleakage were evaluated. Hybrid layer and resin tags were also observed with SEM. Data were analyzed with two-way ANOVA (bond strength) and Kruskal-Wallis analysis (nanoleakage, resin tag score) (α = 0.05).RESULTS:Significant differences existed in bond strength (p = 0.02) and nanoleakage (p = 0.02) among groups. After 24 h and after thermocycling, group D exhibited higher bond strengths than did group B (p = 0.02 after 24 h, p = 0.03 after aging) and group A (p = 0.06 after 24 h, p = 0.04 after aging). Bond strength and nanoleakage showed no significant difference after aging (p > 0.05). There was no significant difference in resin tag scores between any of the groups, but the apical third of the roots exhibited the lowest score (p = 0.001).CONCLUSION:The synergistic effects of the two pretreatment strategies (EWB in a simplified dehydration protocol and UA) improved the bonding quality. UA had a positive effect on the adhesion of the etch-and-rinse adhesives, when EWB in a simplified procedure was applied into the root canal.
Effect of Calcium Hydroxide and Nano Calcium Hydroxide on Push-out Bond Strength of Epoxy Resin Sealer to Root Canal Dentin

Yasser Samadi,S. Sahebi,B. Asheghi,Fateme Eskandari

DOI: https://doi.org/10.22037/iej.v17i1.36566

Abstract:Introduction: The goal of this paper was to determine the impact of calcium hydroxide (CH) and nano-calcium hydroxide (NCH) on the push-out bond strength of an epoxy resin-based sealer. Materials and Methods: A total of 48 mandibular premolars were decoronated in vitro and instrumented by a ProTaper rotary system up to F4. The specimens then were randomly allocated into 3 groups (n=16). The two intervention groups were treated with either CH or NCH and one control group which did not receive any intracanal medicament. After one week of medicament placement, the specimens were irrigated by 10 mL 17% EDTA, followed by 10 mL 2.5% NaOCl and an ultimate flushing by 5 mL sterile saline. The samples were obturated using AH-Plus Jet sealer and gutta-percha by lateral condensation technique. Push-out test was done by a universal test machine to evaluate the bond strength among the sealer and the root canal dentin. Repeated measurement analysis followed by Tukey’s HSD and Bonferroni post-hoc tests were used for data analysis. Results: The control group showed a higher push-out bond strength in comparison to the specimens in the CH and NCH groups (P<0.05). In spite of the greater push-out bond strength of the samples treated with NCH in comparison to those in CH group, no statistically notable difference was found among them (P>0.05). Additionally, irrespective of the kind of medicament, the bonding at the apical level of the root canal was stronger compared to the coronal third (P<0.001). Conclusion: According to the present in vitro study, application of CH and NCH resulted in a significant reduction of the bond strength between the epoxy resin-based sealer and dentinal walls. Although, application of these medicaments resulted in reduction of bonding of epoxy resin-based sealers root canal dentin significantly.

Medicine
Filling Material Bond Strength to Dentin Is Positively Influenced by the Agitation of Endodontic Final Irrigating Solutions

Alessandra Aparecida da Silva Trandafilov,Renata Grazziotin-Soares,Amanda Palmeira Arruda Nogueira,Etevaldo Matos Maia-Filho,Meire Coelho Ferreira,Rudys Rodolfo de Jesus Tavarez,José Bauer,Ceci Nunes Carvalho

DOI: https://doi.org/10.22037/iej.v19i2.43108

Abstract:Introduction: The final step of irrigation has been considered to of increase the bonding strength of filling material to dentin. This study investigated the impact of three final-step irrigation methods on the endodontic sealer bond strength to dentin by using a micro push-out test. Materials and methods: Palatal roots of human maxillary molars were cleaned and shaped and randomly divided in six groups (n=15) according to the final-step irrigation method and the type of root canal sealer used. The solutions used for the final-step irrigation were 17% ethylenediaminetetraacetic acid and 2.5% sodium hypochlorite, which underwent three methods: 1) syringe-needle irrigation/conventional, 2) passive ultrasonic irrigation, and 3) XP-endo Finisher agitation. The root canal sealers used were: EndoSequence BC Sealer, and AH-Plus sealer. Roots were obturated with the single cone technique and then, cross-sectioned in 2-mm-thick slices (3 slices from each root). Push-out test was performed on the sliced specimens (cervical, middle, and apical thirds) with a universal testing machine. Bond strength values were recorded in megapascal (MPa). Subsequently, each specimen was longitudinally split to verify the type of failure. Data analysis was performed using Johnson transformation, three-way analysis of variance, Tukey's post-hoc tests, and the partial Eta squared test. Results: There were significant differences in bond strength between the sealers [AH: 4.46±2.24 and BC: 3.47±2.19 MPa (P<0.001)]; between final-step irrigation methods [passive ultrasonic irrigation: 4.52±2.25, XP-endo Finisher: 3.93±3.93 and syringe-needle irrigation/conventional: 3.37±2.51 MPa (P<0.001)], and between the root canal thirds represented by the sliced specimens [cervical: 5.45±2.39, middle: 4.14±1.99 and apical: 2.30±1.30 MPa (P<0.001)]. The interaction between the variables had no significance (P>0.05). Conclusion: Agitation of the final irrigating solution may improve the bonding of the sealer to canal walls. AH-Plus sealer had the highest bond strength. The bond strength reduced significantly towards the apical third.
The effect of different acidic irrigation solutions on the pushout bond strength of root canal filling

Funda Fundaoğlu Küçükekenci

DOI: https://doi.org/10.34172/joddd.2023.36920

2023-04-03

Abstract:Background. This study investigated the effects of different acidic solutions used as the final irrigation on the push-out bond strength (PBS) of resin-based and bioceramic-based root canal sealers. Methods. 100 single root and canal human incisors were selected and decorated. Root canal shaping was done with ProTaper Next rotary files up to X4 and rinsed with 5 mL of 5.25% NaOCl between each file. Then, teeth were divided into five main groups according to the final irrigation (n=20). Group 1: glycolic acid; Group 2: phosphoric acid; Group 3: citric acid; Group 4: EDTA and group 5: saline. Then, each group was divided into two subgroups according to the canal sealer used (n=10). The groups filled with bioceramic-based sealer (bioserra) were named A, and the groups filled with resin-based sealer (AH Plus) were called B. PBS test was applied to one of the two samples obtained from the coronal third of each root. The data were statistically analyzed using a two-way analysis of variance and Tukey’s HSD test (α=0.05). Results. Statistically, the highest PBS value was obtained in group 2A (4.81±0.03 MPa), which was irrigated with phosphoric acid and filled with bioserra, and the lowest PBS value was obtained in group 5B (1.10±0,03), which was irrigated with saline and filled with AH Plus (P<0.05). There was a statistical difference between all groups except group 1A and group 3A (P<0.05). Conclusion. The bioceramic-based root canal sealer (bioserra) bond strength is superior to resin-based (AH Plus). Phosphoric acid, glycolic acid, and citric acid can be an alternative to EDTA.
Removal efficiency of calcium hydroxide dressing from the root canal without chemically active adjuvant

Lara Maalouf,Carla Zogheib,Alfred Naaman

DOI: https://doi.org/10.5005/jp-journals-10024-1298

2013-03-01

Abstract:Aim: Compare the efficiency in removing two calcium hydroxide [Ca(OH)2] preparations from root canal and apical third using single use syringe, ultrasonics and RinsEndo((®)) with saline solution. Materials and methods: One hundred and eighty human singlerooted teeth were instrumented using ProTaper((®)) rotary system, divided into two groups according to Ca(OH)2 filling. A: Powder mixed with water, B: Pulpdent((®)). Each group was divided into three subgroups for the irrigation: A1, B1: Single use syringe; A2, B2: Ultrasonics; A3, B3: RinsEndo((®)). Teeth were split longitudinally, photographed and imported into Adobe Photoshop. The percentage ratios of Ca(OH)2 remaining in the canal and in the apical third were calculated. Data were statistically analyzed using 'ANOVA two-way' and 'univariate tests'. Results: (a) Remnants of medicament were found in all teeth, (b) no statistically significant difference in the elimination of both Ca(OH)2 from the entire canal (p = 0.436), however, mixed powder was better eliminated from the apical third (p = 0.005), (c) no statistically significant difference among the irrigation techniques in the whole canal (p = 0.608), though, RinsEndo((®)) and ultrasonics were the most effective in cleaning the apical third (p = 0.032) when mixed powder was used. Conclusion: None of the techniques removed completely Ca(OH)2 from the canal. In the apical third, RinsEndo((®)) and ultrasonics were the most effective when mixed powder was used. Clinical significance: Ca(OH)2, the most commonly used intracanal dressing, should be completely eliminated before the obturation to assure a good endodontic sealing. Based on the results of this study, RinsEndo((®)) and ultrasonics were the most effective in removal of Ca(OH)2 especially the powder mixed with water presentation.
Effect of sodium hypochlorite, ethylenediaminetetraacetic acid, and dual-rinse irrigation on dentin adhesion using an etch-and-rinse or self-etch approach

Matej Par,Tobias Steffen,Selinay Dogan,Noah Walser,Tobias T. Tauböck

DOI: https://doi.org/10.1038/s41598-024-57009-x

IF: 4.6

2024-03-16

Scientific Reports

Abstract:The aim was to investigate the influence of endodontic irrigation solutions and protocols on the micro-tensile bond strength (μTBS) to dentin using an etch-and-rinse (ER) or self-etch (SE) adhesive approach. Eighty extracted human molars were ground to dentin. After pretreating for 27 min (21 min–3 min–3 min) with five different endodontic irrigation protocols (Group 1: NaOCl–EDTA–NaOCl; Group 2: NaOCl–NaOCl–EDTA; Group 3: NaOCl–NaCl–NaOCl; Group 4: Dual Rinse–Dual Rinse–Dual Rinse; Group 5: NaCl–NaCl–NaCl), an ER (Optibond FL, Kerr) or a SE (Clearfil SE Bond, Kuraray) adhesive system was applied. After light-curing, composite build-ups were made and cut into dentin-composite sticks. μTBS and failure modes were analyzed. Nonparametric statistical analyses (α = 0.05) were performed for comparison of the five groups within each type of adhesive as well as between the two adhesive systems used. The use of an ER instead of a SE adhesive system resulted in significantly higher μTBS for all irrigation protocols except for group 1 (NaOCl–EDTA–NaOCl) and 2 (NaOCl–NaOCl–EDTA). A statistical difference between the five different endodontic irrigation protocols was only found within the SE adhesive group, where group 1 (NaOCl–EDTA–NaOCl) achieved highest values. The use of an ER adhesive system cancels out the effect of the endodontic irrigation solution. The highest μTBS was achieved when using a NaOCl–EDTA–NaOCl-irrigation protocol in combination with Clearfil SE Bond, which shows that the selection of the endodontic irrigation should match the corresponding SE adhesive system.

multidisciplinary sciences
Evaluation of the Sealing Ability and Bond Strength of Two Endodontic Root Canal Sealers: An In Vitro Study

Manuel Marques Ferreira,José Pedro Martinho,Inês Duarte,Diogo Mendonça,Ana Catarina Craveiro,Maria Filomena Botelho,Eunice Carrilho,Carlos Miguel Marto,Ana Coelho,Anabela Paula,Siri Paulo,Nuno Chichorro,Ana Margarida Abrantes

DOI: https://doi.org/10.3390/dj10110201

2022-10-27

Dentistry Journal

Abstract:Background: Obturation represents a critical step in endodontic treatment, which relies on a core material and a sealer. This study aims to evaluate the sealing ability and bond strength to the root canal walls of an epoxy resin-based sealer (AH-Plus®, Dentsply Sirona, Johnson City, TN, USA) and a bioceramic sealer (GuttaFlow Bioseal®, Coltène/Whaledent, GmbH + Co. KG, Langenau, Germany). Methods: Thirty-eight maxillary anterior teeth with single roots and identical round sections were separated into two experimental groups according to the root canal sealers used, namely, G1 = AH-Plus® and G2 = GuttaFlow Bioseal®, and two control groups, specifically, G3 = the negative control and G4 = the positive control. The sealing capacity was measured by the penetration of the radioactive isotope 99mTc. For the push-out test, the compressive force test was performed in a universal machine and the force was applied by exerting pressure on the surface of the material to be tested in the apical to the coronal direction and using three test points with different diameters. Results: GuttaFlow Bioseal® exhibited superior sealing ability compared to AH-Plus® (p = 0.003). Regarding the bond strength, AH-Plus® provided higher adhesion values than GuttaFlow Bioseal® in the three sections of the tooth root (p = 0.001). Conclusions: GuttaFlow Bioseal® had significantly better sealing ability than AH-Plus® but lower adhesion values in the three zones of the root canal, with statistically significant differences between the groups. However, it is important to note that for the action of endodontic sealers to be maximized, the root-filling technique must be most appropriate.
A comparative evaluation of two irrigating solutions combination effectiveness on apical sealing of different root canal sealers

Godelatia Jesslyn,FLoes Djimahit Sjahruddin,Tien Suwartini,BernardOngki Iskandar

DOI: https://doi.org/10.4103/SDJ.SDJ_13_23

2023-05-01

Scientific Dental Journal

Abstract:Background: Root canal irrigants play an essential role in removing the smear layer, pulp tissue, and microorganisms in the root canal system. The irrigation solution can remove the smear layer, which can interfere with the bond between the sealers. As a result of sealer penetration into dentin tubules following smear layer removal, an apical seal was obtained. One of the most recent innovations in root canals consists of a combination of silver citrate (BioAKT, New Tech Solution, Brescia, Italy) and chlorhexidine-ethylenediaminetetraacetic acid (CHX-EDTA; SmearOFF, Vista Dental, Racine, USA). These irrigants were used as the final irrigant for root canal disinfection. Epoxy sealers (AH26, Dentsply Maillefer, Ballaigues, Switzerland) and bioceramic sealers (ceraseal, Meta Biomed Co., Cheongju, Korea) have excellent adhesive properties and sealing ability and are commonly used as obturation materials. Objective: The aim of this study was to compare the effectiveness of a root canal combination irrigant between silver citrate and CHX-EDTA on the apical sealing ability of epoxy sealer and bioceramic sealer. Materials and Methods: Forty extracted mandible single-root premolars were used in this study. The root canal preparation was done with a rotary instrument until no. 30.06. Irrigation was performed using 5.25% NaOCl between instrumentations. The final irrigant and sealers were Group I: BioAKT + ceraceal; Group II: BioAKT + AH26; Group III: SmearOFF + ceraceal; and Group IV: SmearOFF + AH26. Obturation was then performed using the warm vertical compaction technique. The sealing ability of endodontic sealers was evaluated using the dye penetration method under the magnification of the stereomicroscope. The data were statistically analyzed using a two-way analysis of variance (ANOVA) (SPSS, IBM, USA). Results: No significant difference (P > 0.05) was observed between the four experimental groups. Conclusion: Both combination irrigants and sealers showed comparable effectiveness in smear layer removal and a similar sealing ability.

Medicine
The effect of different intracanal irrigants on the push-out bond strength of dentin in damaged anterior primary teeth

Leila Bassir,Shirin Taravati,Farzad Nouri,Saeide Rahimi

DOI: https://doi.org/10.25122/jml-2024-0164

Abstract:This experimental study investigated the effect of different intracanal irrigants on the push-out bond strength of dentin in damaged anterior primary teeth. The crowns of 90 anterior primary teeth were sectioned horizontally, 1 mm above the cementoenamel junction (CEJ). Following canal preparation with K-files, all groups except the negative control received normal saline irrigation. Canals were then irrigated with either 3% or 5.25% sodium hypochlorite (NaOCl), 2% or 0.2% chlorhexidine (CHX) solution (except negative and positive controls). The roots were filled with Metapex material and covered with a calcium hydroxide liner. In root canals, the bond was applied by self-etching and then light-cured for 20 seconds before canals were restored incrementally with composite. Stereomicroscopes were used to assess failure patterns. Push-out bond strengths (MPa ± SD) were: 3% NaOCl (16.92 ± 5.78), 5.25% NaOCl (8.96 ± 3.55), 2% CHX (14.76 ± 5.56), and 0.2% CHX (7.76 ± 2.93). Significant differences were seen across the irrigants regarding the push-out bond strength of dentin sections (P <0.001). The most frequent failures were adhesive and cohesive. NaOCl and CHX irrigants increased the push-out bond strength compared to controls. Compared to controls, both 3% NaOCl and 2% CHX irrigants significantly increased the push-out bond strength of dentin in non-vital anterior primary teeth.
The effect of different irrigation materials and application techniques on push-out bond strength of fiber post to root dentin

Sherif Elkhodary,Reham Elbasty

DOI: https://doi.org/10.21608/edj.2018.79366

2018-10-01

Egyptian Dental Journal

Abstract:Statement of the problem: Achieving a reliable bond to root canal dentin is a subject ofongoing research. Improving the bond strength between root dentin and fiber posts through differentirrigation materials and techniques used during post space preparation has been suggested; yet,there is a few data regarding the irrigation materials and application techniques that could be usedto achieve an optimum bond.Purpose: The aim of this invitro study was to evaluate the effect of different irrigation materials(NaOCl + EDTA and Qmix) and application techniques (syringe, passive ultrasonic irrigation, XPfinisher) on the push-out bond strength of fiber posts to root dentin.Materials and methods: Forty eight human premolars, with straight root canals and averageroot length of 17±1 mm were selected. The clinical crowns were cut 2mm above the cementoenameljunction. Root canal treatment was done with ProTaper universal rotary instruments to size F4 andthen obturated with lateral condensation technique and AdSeal sealer. Teeth were then stored indistilled water for 7 days at 37˚C after sealing of the access cavity with temporary filling free fromeugenol. For each tooth, post space preparation was done using gates glidden drills leaving 4-5 mmof gutta percha as apical seal. FibreKleer post tapered drill corresponding to the glass fiber postsize was used to remove any residual root filling. The prepared roots were equally and randomlydivided into two main groups (n = 18) before post cementation as follows; Group I: Irrigation with10 ml of 2.6% NaOCL over 60 seconds followed by 5 ml EDTA for another 60 seconds, Group II:Irrigation with 3 ml Q-mix for 60 seconds. Each of the two main groups was further divided into 3subgroups, Subgroup A (n = 6): Conventional syringe irrigation (IA, IIA), Subgroup B (n = 6):Passive ultrasonic irrigation (PUI) was performed for 60 seconds (IB, IIB), Subgroup C (n = 6):XP finisher was used with a torque-controlled motor according to the manufacturer’s instructions.The canal was filled with irrigant and the finisher was operated for 60 seconds using slow andgentle in-and-out movements (IC, IIC). All posts were tried-in, cleaned with alcohol, and thensilanized with ceramic primer for 60 seconds then air dried. Cementation was done using Rely XUnicem 2 self adhesive resin cement.After the luting procedure, the coronal part of the posts was covered completely with resinmodifiedglass ionomer cement and the roots were stored in distilled water for 7 days at 37˚C.Roots were embedded in epoxy resin and transversely sectioned perpendicular to the long axis ofthe root with an Isomet machine. It was pre-set to serially obtain six specimens (2 mm ± 0.1) thick,where two specimens corresponded to each root third. For push-out testing, each specimen wasmounted in a custom made loading fixture then subjected to compressive loading with the apicalsurface upwards at a crosshead speed of 1 mm/min via a computer controlled testing machine.The maximum failure load was recorded in Newton and converted into MPa. Two teeth as arepresentative of each subgroup were split longitudinally after post space preparation and irrigation,and smear layer was examined using scanning electron microscope at 1, 4.5, and 8mm levels fromthe apical to the coronal third of the post space at 1000 magnification. Data were recorded, tabulatedand statistically analysed.Results: Regarding the push-out bond strength results; it was found that regardless of applicationtechniques or radicular regions, there was no significant difference in the push-out bond strengthbetween both irrigation solutions as proven by three-way ANOVA test, where (NaOCl + EDTA ≥Q mix). Irrespective to irrigation solutions or radicular regions, there was significant difference inthe push-out bond strength between application techniques as demonstrated by three-way ANOVAtest , where (PUI ≥ XP > Syringe). Pair-wise Turkey’s post-hoc showed no significant difference inthe push-out bond strength between (PUI and XP). Regardless of irrigation solutions or applicationtechniques; there was no significant difference in the push-out bond strength between radicularregions as verified by three-way ANOVA test where (cervical ≥ apical ≥ middle). Regarding thesmear layer marking; it was found that there was non-significant difference between both irrigationsolutions as proven by Chi square test where (NaOCL+EDTA > Qmix). There was also nonsignificantdifference between irrigation application techniques as demonstrated by Chi square testwhere (Syringe ≥ PUI≥ XP). In addition, there was non-significant difference between radicularregions as verified by Chi square test where (apical ≥ middle ≥ cervical).Conclusions Within the limitations of this study it was concluded that:1. Q mix irrigation solution decreased the bond strength between root dentin and fiber postswhen self adhesive luting agent was used.2. The use of XP finisher and passive ultrasonic irrigation as irrigant activation devicesimproved the bond strength between root dentin and fiber posts compared to conventionalsyringe irrigation.
Comparison of push‐out bond strength and apical microleakage of different calcium silicate‐based cements after using EDTA, chitosan and phytic acid irrigations

Tutku Koçak Şahin,Murat Ünal

DOI: https://doi.org/10.1002/jemt.24589

2024-04-27

Microscopy Research and Technique

Abstract:After the root slices were immersed in EDTA, Chitosan, Phytic acid and Saline solutions, the root tip was sealed with Biodentine, MTA Repair HP and NeoPUTTY. SEM image after push out bond strength test is shown. This research was aimed to evaluate push‐out bond strength and apical‐microleakage after application of three different calcium silicate‐based cements with irrigation solutions on simulated immature teeth. 40 maxillary permanent canine teeth were used for push‐out bond strength test, and 120 maxillary permanent incisors were used for microleakage evaluation. 120 root slices were divided into four main groups (EDTA, Chitosan, Phytic acid, and Saline) and immersed these solutiouns according to irrigation procedures. Each irrigation group was divided into 3 subgroups (Biodentine, MTA Repair HP, and NeoPUTTY). The prepared teeth were divided into four groups according to irrigation procedure for microleakage test. EDTA irrigation with Biodentine group showed highest push‐out bond strength value and saline group with Neoputty showed the lowest push‐out bond strength value. The highest microleakage value was seen in saline group with MTA Repair HP, while the lowest microleakage value was observed chitosan with Biodentine group. Chitosan and phytic acid solutions can be recommended as an alternative irrigation solution to 17% EDTA in single‐session apexification treatment, since they are non‐toxic, naturally occurring materials, effectively remove the smear layer, and have a positive effect on bond strength and apical leakage. Research Highlights One of the factors affecting the long‐term success of root canal treatment is a hermetic seal. Non‐hermetic or inadequate filling triggers a chronic inflammatory reaction in periapical tissues, causing fluids to enter the spaces and negatively affecting the success of the treatment. Therefore, this study will help clinicians choose the right biomaterial and irrigation solution that will affect the success of root canal treatment.

biology,microscopy,anatomy & morphology
Effect of Chitosan Irrigant and Lubricating Gel on Bond Strength of Resin Sealer to Radicular Dentin: An In Vitro Study

Karthika K Kumar,Veena Pai,S N Joshi,Ashok,Roopa Nadig

DOI: https://doi.org/10.7759/cureus.60143

2024-05-12

Cureus

Abstract:Background: The adhesive strength of sealers to dentin is influenced by various factors, and the presence of a smear layer is among the critical variables. Chitosan, known for its dentin compatibility, has previously demonstrated a reduction in dentin change and resin sealer bond strength comparable to ethylenediaminetetraacetic acid (EDTA) when used as an irrigant and final rinse. The study investigates the impact of chitosan, used as both a lubricating gel and final rinse, on the push-out bond strength of resin sealer. Materials and method: Forty single-rooted premolar teeth, each with a fully formed root and a single root canal, were collected post-extraction. During canal preparation, 1 ml sodium hypochlorite (3%) was used for irrigation at every change of instrument, followed by applying specific chelating gel and final rinse for each experimental group. The groups included: Group 1 (17% EDTA chelating gel, final rinse with saline), Group 2 (17% EDTA chelating gel, final rinse with 17% EDTA solution), Group 3 (chitosan chelating gel, final rinse with saline solution), and Group 4 (chitosan chelating gel, final rinse with 0.2% chitosan solution), 10 specimens in each group. After obturation, specimens were sealed and incubated for a week at 37°C with 100% humidity. The universal testing machine was used for push-out tests, and specimens were examined using a scanning electron microscope (SEM) to identify various types of bond failure. Results: Among the four groups, Group 2 exhibited the highest mean push-out bond strength (7.33 ± 0.26 MPa), followed by Group 4 (5.33 ± 0.25 MPa), Group 1 (4.61 ± 0.30 MPa), and Group 3 (2.94 ± 0.32 MPa). The variations in bond strength suggest a notable impact of the chelating agents and final rinse solutions on the resin sealer's interaction with dentin. Conclusion: The study concludes that the use of EDTA as both a lubricating gel and a final rinse significantly enhances push-out bond strength, outperforming chitosan in this study. Groups with saline as the final rinse (Group 1 and Group 3) exhibited the least bond strength, highlighting the importance of the final rinse in root canal therapy.
Do intracanal medications used in regenerative endodontics affect the bond strength of powder-to-liquid and ready-to-use cervical sealing materials?

Marina Carvalho Prado,Kevillin Martiniano,Andrea Cardoso Pereira,Karine L. Cortellazzi,Marina A. Marciano,Gabriel Abuna,Adriana de-Jesus-Soares,MarinaCarvalho Prado,AndreaCardoso Pereira,KarineL Cortellazzi,MarinaA Marciano

DOI: https://doi.org/10.4103/jcd.jcd_428_21

2021-01-01

Journal of Conservative Dentistry

Abstract:Aim: This study evaluated the effect of four intracanal medications commonly used in regenerative endodontic procedures on the bond strength of four calcium silicate-based materials, in which two are powder-to-liquid products (MTA and MTA-HP) and the other are ready-to-use materials (EndoSequence Root Repair Material Fast Set Putty [ERRM] and Bioceramic Repair [BIO-C Repair]).Methods: Ten bovine central incisors were selected and 4 slices (1.0 ± 0.1 mm) were prepared from each root. Next, four 0.8-mm wide holes were drilled in each slice and specimens were filled with one of the following intracanal medications: triple antibiotic paste, double antibiotic paste, calcium hydroxide with distilled water, and calcium hydroxide with 2% chlorhexidine gel. After 21 days, holes were filled with one of the materials: MTA, MTA-HP, ERRM, or BIO-C Repair. After storage, push-out test and failure analysis were performed. Data were submitted to analysis of variance in a 4 × 4 factorial scheme. Tukey's test was used for multiple comparisons.Results: The use of different interappointment dressings did not influence the results (<i>P</i> > 0.05). ERRM and BIO-C Repair presented significantly higher values than MTA and MTA-HP (<i>P</i> < 0.0001). Specimens showed a 100% occurrence of adhesive failures.Conclusion: The use of different intracanal medications presented similar impact on bond strength of calcium silicate-based materials. Ready-to-use ERRM and BIO-C Repair materials presented the best push-out values to dentine, whereas powder-to-liquid MTA and MTA-HP cements showed the lowest results.
Persistent homology for automatic determination of human-data based cost of bipedal walking

Ramanarayan Vasudevan,A. Ames,R. Bajcsy

DOI: https://doi.org/10.1016/J.NAHS.2012.07.006

2013-02-01

Abstract:
Sodium transport in airway epithelium correlates with lung compliance in healthy newborn infants.

O. Helve,O. Pitkänen,T. Kirjavainen,S. Andersson

DOI: https://doi.org/10.1016/J.JPEDS.2004.09.024

IF: 2.99

2005-02-01

Jornal de Pediatria

Abstract:
Effect of calcium hydroxide and calcium hydroxide nanoparticles used as intracanal drugs after manual and ultrasonic removal on the bond strength of a new sealer with a pozzolan base (Endoseal mineral trioxide aggregate)

Mohammad Frough Reyhani,Amin Salem-Milani,Maryam Janani,Amirhossein Dogohar,Leila Nazari

DOI: https://doi.org/10.4103/endo.endo_11_24

2024-09-05

Endodontology

Abstract:ABSTRACT Aim: The adhesion ability of filling materials to the root canal wall can be affected by the intracanal medicaments. The present study investigated the effect of pretreatment with nano-calcium hydroxide and calcium hydroxide on the bond strength of Endoseal mineral trioxide aggregate (MTA) to root canal dentin. Materials and Methods: Fifty maxillary incisor teeth were randomly divided into two experimental groups ( n = 20) and a control group ( n = 10) after decoronation near the cementoenamel junction and root canal instrumentation according to the type of intracanal medicament (calcium hydroxide and nano-calcium hydroxide). Each experimental group was divided into two subgroups based on manual and ultrasonic drug removal methods. After removing intracanal medicaments and irrigating them, all the groups were obturated with gutta-percha and Endoseal MTA sealer. Then, the samples were sectioned into cross-sections with a thickness of 2 mm using a diamond disc, and the push-out bond strength test was performed on them. Results: The results showed no significant difference in the mean Endoseal MTA bond strength in terms of the type of intracanal medicament and the method used to remove it from the canal ( P > 0.05). Conclusion: Using the ultrasonic method compared to the manual method in removing intracanal medicament resulted in no significant difference in the strength of the Endoseal MTA bond. Furthermore, the effect of nanoparticle calcium hydroxide on Endoseal MTA bond strength was not different compared to the conventional type of this medication.
Effect of Dentin Irrigants on Push-Out Bond Strength in Resin Cementation Protocols for Fiber Posts in Endodontically Treated Teeth: An In Vitro Study

Sandra García-Varela,João Carlos Ramos,María José Ginzo-Villamayor,Pablo Castelo-Baz,Ramón Méndez-Díaz,Marcos Aníbal Anache-D’Abate,Tania Gancedo-Gancedo,Manuel Ruíz-Piñón,Soledad Mareque-Bueno,Benjamín José Martín-Biedma,Marcos Aníbal Anache-D'Abate

DOI: https://doi.org/10.3390/ma17061432

IF: 3.4

2024-03-22

Materials

Abstract:The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore®; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore®; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus). Forty-eight hours after post cementation, ten teeth from each group were cross-sectioned into three discs (cervical, middle and apical regions). Thirty specimens of each group (n = 30) were submitted to a push-out test at a crosshead speed of 1 mm/min. The remaining two teeth of each group were sectioned in the same manner, and the resin–dentin interface was evaluated using scanning electron microscopy (SEM). The results were statistically analyzed with the ANOVA test and Tukey's test (p 0.01). The combination of NaOCl 5% and ClearfilTM Universal Bond reduced the adhesive strength (p < 0.01). The NaOCl 5%, in relation to other irrigants, significantly decreased the push-out bond strength.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Fine structural localization of peroxidase in the rat thyroid

Y. Nakai,H. Fujita

DOI: https://doi.org/10.1007/BF00338961

Zeitschrift für Zellforschung und Mikroskopische Anatomie

Abstract:
Effects of Etching Time and Ethanol Wet Bonding on Bond Strength and Metalloproteinase Activity in Radicular Dentin

Allegra Comba,Andrea Baldi,Riccardo Pucci,Chiara Rolando,Mario Alovisi,Damiano Pasqualini,Nicola Scotti

DOI: https://doi.org/10.3390/jcm13092474

IF: 3.9

2024-04-25

Journal of Clinical Medicine

Abstract:(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) Methods: Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s H3PO4 application + UBQ; (G2) 30 s H3PO4 application + UBQ; (G3) 15 s H3PO4 application + ethanol pre-treatment + UBQ; (G4) 30 s H3PO4 + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at p < 0.05. (3) Result: ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength (p < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface (p < 0.01). (4) Conclusions: The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo.

medicine, general & internal

Sparse inference of the drift of a high-dimensional Ornstein-Uhlenbeck process

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin

Bonding Quality of Etch-and-Rinse Adhesives in Root Canals Upon Different Pretreatments.

Effect of Calcium Hydroxide and Nano Calcium Hydroxide on Push-out Bond Strength of Epoxy Resin Sealer to Root Canal Dentin

Filling Material Bond Strength to Dentin Is Positively Influenced by the Agitation of Endodontic Final Irrigating Solutions

The effect of different acidic irrigation solutions on the pushout bond strength of root canal filling

Removal efficiency of calcium hydroxide dressing from the root canal without chemically active adjuvant

Effect of sodium hypochlorite, ethylenediaminetetraacetic acid, and dual-rinse irrigation on dentin adhesion using an etch-and-rinse or self-etch approach

Evaluation of the Sealing Ability and Bond Strength of Two Endodontic Root Canal Sealers: An In Vitro Study

A comparative evaluation of two irrigating solutions combination effectiveness on apical sealing of different root canal sealers

The effect of different intracanal irrigants on the push-out bond strength of dentin in damaged anterior primary teeth

The effect of different irrigation materials and application techniques on push-out bond strength of fiber post to root dentin

Comparison of push‐out bond strength and apical microleakage of different calcium silicate‐based cements after using EDTA, chitosan and phytic acid irrigations

Effect of Chitosan Irrigant and Lubricating Gel on Bond Strength of Resin Sealer to Radicular Dentin: An In Vitro Study

Do intracanal medications used in regenerative endodontics affect the bond strength of powder-to-liquid and ready-to-use cervical sealing materials?

Persistent homology for automatic determination of human-data based cost of bipedal walking

Sodium transport in airway epithelium correlates with lung compliance in healthy newborn infants.

Effect of calcium hydroxide and calcium hydroxide nanoparticles used as intracanal drugs after manual and ultrasonic removal on the bond strength of a new sealer with a pozzolan base (Endoseal mineral trioxide aggregate)

Effect of Dentin Irrigants on Push-Out Bond Strength in Resin Cementation Protocols for Fiber Posts in Endodontically Treated Teeth: An In Vitro Study

Fine structural localization of peroxidase in the rat thyroid

Effects of Etching Time and Ethanol Wet Bonding on Bond Strength and Metalloproteinase Activity in Radicular Dentin