Migration behaviors of heavy metals during the co-pyrolysis of sludge and sawdust
Weihong Zhou,Xiangyu Li,Yifei Ding,Bin Bai
DOI: https://doi.org/10.1016/j.joei.2024.101547
IF: 6.47
2024-02-02
Journal of the Energy Institute
Abstract:The disposal of heavy metal-laden substances in sludge presents a significant challenge to the ecological environment. A thorough comprehension of heavy metal migration behavior is crucial for the environmentally friendly and safe management of sludge resources. Therefore, this study initially focuses on investigating the distribution of heavy metals from sludge pyrolysis. The results reveal a substantial reduction in the emission of heavy metals at a pyrolysis temperature of 700 °C. Consequently, Cu, Zn, Mn, Ni, and Cr migrate into syngas and char at concentrations of 1 %, 5 %, 3 %, 3 %, and 5 % by weight, and 78 %, 95 %, 79 %, 74 %, and 78 % by weight, respectively. Furthermore, to facilitate the enrichment and removal of heavy metals, sawdust is introduced for co-pyrolysis with sludge. During the co-pyrolysis, the total content of heavy metals in the syngas initially increases and then decreases with higher addition proportion of sawdust, while the opposite trend is observed in the pyrolysis char. In addition, the co-pyrolysis temperature affects the fixation of heavy metals. The total content of heavy metals in the syngas rises with higher temperatures, while it decreases in the char. Ultimately, the study concludes that the reasonable disposal process is achieved at a pyrolysis temperature of 600 °C with a 10 wt% addition of sawdust, resulting in the lowest content of heavy metals in syngas.
energy & fuels