Molecular cloning of rat uncoupling protein 2 cDNA and its expression in genetically obese Zucker fatty (fa/fa) rats.

S. Hidaka,T. Kakuma,H. Yoshimatsu,Seikoh Yasunaga,M. Kurokawa,Toshiie Sakata

DOI: https://doi.org/10.1016/S0005-2760(97)00188-4

1998-01-23

Biochimica et Biophysica Acta

Abstract:

What problem does this paper attempt to address?

Cost attractive hydrogel electrolyte for low temperature aqueous sodium ion batteries

Yingbo Cheng,Xiaowei Chi,Jianhua Yang,Yu Liu

DOI: https://doi.org/10.1016/j.est.2021.102701

IF: 9.4

2021-08-01

Journal of Energy Storage

Abstract:Low temperature tolerance of aqueous sodium ion batteries (ASIBs) represents a high challenge, eventhough ASIBs are attractive for large scale energy-storage application due to their high safety, low cost and environmental friendliness. For the first time, this work reports a Na2SO4-SiO2 hydrogel type electrolyte operated at low temperature as -30℃ using fumed silica as the gel matrix and methyl alcohol as the anti-freezing additive. Due to the inter-molecular bonding between SiO2 and Na2SO4, the precipitation of Na2SO4 and the continue growth of the Na2SO4 grain in supersaturated electrolyte is highly suppressed at low temperature. The Na2SO4-SiO2 hydrogel electrolyte possesses a high ionic conductivity as 0.070 mS cm−1 at -30℃. An aqueous sodium ion cell with the as-proposed SiO2Na2SO4 hydrogel electrolyte has been developed based on active carbon (AC) as the cathode and carbon coated NaTi2(PO4)3 () as the anode. At -30℃, the cell possesses a reversible capacity of 61.8 mAh g−1 (based on ) at a current density as 0.13 A g−1 (0.13 mA cm−2) with a high cycling stability. This work provides a new path for the development of aqueous sodium ion batteries for low temperature operation.

energy & fuels
Dilute Hybrid Electrolyte for Low Temperature Aqueous Sodium Ion Batteries

Yifei Sun,Yan Zhang,Zhao Xu,Wenshan Gou,Xuguang Han,Mengmeng Liu,Chang Ming Li

DOI: https://doi.org/10.1002/cssc.202201362

IF: 8.4

2022-10-06

ChemSusChem

Abstract:A hybrid electrolyte based on low concentration sodium nitrate with glycerol as an additive is proposed for aqueous sodium‐ion batteries (ASIBs) towards low temperature performances. Based on this dilute hybrid electrolyte and configured by bimetallic Prussian blue analogues (Ni 2 ZnHCF) cathode and 3,4,9,10‐perylenetetracarboxylic diimide (PTCDI) anode, the full cell demonstrates surprising cycle performance with a specific capacity of 60 mAh g ‐1 (>800 cycles) and achieves prominent performance at low temperature. Glycerol effectively expands the electrochemical stability window of the hybrid electrolyte to 2.7 V from formation of strong hydrogen bonds with water molecules and realizes the operation of the cell at low temperature, delivering a stable reversible capacity of 40 mAh g ‐1 at ‐10 °C. The hybrid electrolyte of glycerol‐water provides a new alternative in development of low‐cost, long‐lifespan and low‐temperature for ASIBs and other aqueous battery systems.

chemistry, multidisciplinary,green & sustainable science & technology
Regulating Ion‐Dipole Interactions in Weakly Solvating Electrolyte towards Ultra‐Low Temperature Sodium‐Ion Batteries

Hengyi Fang,Yaohui Huang,Wei Hu,Zihao Song,Xiangshuai Wei,Jiarun Geng,Zhuoliang Jiang,Heng Qu,Jun Chen,Fujun Li

DOI: https://doi.org/10.1002/anie.202400539

2024-02-09

Angewandte Chemie International Edition

Abstract:Sodium-ion batteries (SIBs) are recognized as promising energy storage devices. However, they suffer from rapid capacity decay at ultra-low temperatures due to high Na+ desolvation energy barrier and unstable solid electrolyte interphase (SEI). Herein, a weakly solvating electrolyte (WSE) with decreased ion-dipole interactions is designed for stable sodium storage in hard carbon (HC) anode at ultra-low temperatures. 2-methyltetrahydrofuran with low solvating power is incorporated into tetrahydrofuran to regulate the interactions between Na+ and solvents. The reduced Na+-dipole interactions facilitate more anionic coordination in the first solvation sheath, which consistently maintains anion-enhanced solvation structures from room to low temperatures to promote inorganic-rich SEI formation. These enable WSE with a low freezing point of -83.3°C and faster Na+ desolvation kinetics. The HC anode thus affords reversible capacities of 243.2 and 205.4 mAh g-1 at 50 mA g-1 at -40 and -60°C, respectively, and the full cell of HC||Na3V2(PO4)3 yields an extended lifespan over 250 cycles with high capacity retention of ~100% at -40°C. This work sheds new lights on the ion-dipole regulation for ultra-low temperature SIBs.

chemistry, multidisciplinary
An Anti‐Freezing Hydrogel Electrolyte for Flexible Zinc‐Ion Batteries Operating at −70 °C

S. Bi,Rui Wang,Ying Shi,Zhiqiang Niu,Min Yang,Lili Liu

DOI: https://doi.org/10.1002/adfm.202214546

IF: 19

2023-03-20

Advanced Functional Materials

Abstract:Aqueous zinc‐ion batteries (ZIBs) are considered as the promising candidate of flexible energy storage devices due to their high safety, eco‐friendliness, and low‐cost. However, conventional flexible aqueous ZIBs undergo severe capacity loss at bending and subzero temperature states. Herein, an anti‐freezing hydrogel electrolyte based on zinc tetrafluoroborate (Zn(BF4)2) and polyacrylamide (PAM) is developed. Owing to the strong electronegativity of F atoms, BF4− anions interact with water molecules by OH···F to replace the OH···O between water molecules in Zn(BF4)2‐PAM hydrogel electrolyte, inhibiting the formation of ice crystal lattice in hydrogel electrolyte at low‐temperature. Therefore, the Zn(BF4)2‐PAM hydrogel remains unfrozen state, good flexibility, and high ionic conductivity even at −70 °C, which ensures that they can act as the electrolytes of anti‐freezing flexible ZIBs. As a proof of concept, anti‐freezing flexible ZIBs with all‐in‐one integrated configuration are assembled based on Zn(BF4)2‐PAM hydrogel. They display enhanced electrochemical performance at −70 °C, such as high capacity retention and remarkable cyclic stability. Furthermore, they also maintain stable electrochemical performance under different bending states even at −70 °C. This work broadens the practical application of flexible aqueous ZIBs at ultralow temperature.

Materials Science,Engineering,Chemistry
Monolithic Interphase Enables Fast Kinetics for High‐Performance Sodium‐Ion Batteries at Subzero Temperature

Yi-Hu Feng,Mengting Liu,Junxiu Wu,Chao Yang,Qiang Liu,Yongwei Tang,Xu Zhu,Guang-Xu Wei,Haojie Dong,Xin-Yu Fan,Si-Fan Chen,Wenyu Hao,Lianzheng Yu,Xiao Ji,Ya You,Peng-Fei Wang,Jun Lu

DOI: https://doi.org/10.1002/anie.202403585

2024-04-03

Angewandte Chemie International Edition

Abstract:In spite of the competitive performance at room temperature, the development of sodium-ion batteries (SIBs) is still hindered by sluggish electrochemical reaction kinetics and unstable electrode/electrolyte interphase under subzero environments. Herein, a low-concentration electrolyte, consisting of 0.5 M NaPF6 dissolving in diethylene glycol dimethyl ether solvent, is proposed for SIBs working at low temperature. Such an electrolyte generates a thin, amorphous, and homogeneous cathode/electrolyte interphase at low temperature. The interphase is monolithic and rich in organic components, reducing the limitation of Na+ migration through inorganic crystals, thereby facilitating the interfacial Na+ dynamics at low temperature. Furthermore, it effectively blocks the unfavorable side reactions between active materials and electrolytes, improving the structural stability. Consequently, Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2//Na and hard carbon//Na cells deliver a high capacity retention of 90.8% after 900 cycles at 1 C, a capacity over 310 mA h·g−1 under −30 oC, respectively, showing long-term cycling stability and great rate capability at low temperature.

chemistry, multidisciplinary
Aqueous Batteries Operated at -50 °C

Qingshun Nian,Jiayue Wang,Shuang Liu,Tianjiang Sun,Shibing Zheng,Yan Zhang,Zhanliang Tao,Jun Chen

DOI: https://doi.org/10.1002/anie.201908913

2019-11-18

Abstract:Insufficient ionic conductivity and freezing of the electrolyte are considered the main problems for electrochemical energy storage at low temperatures (low T). Here, an electrolyte with a freezing point lower than -130 °C is developed by using dimethyl sulfoxide (DMSO) as an additive with molar fraction of 0.3 to an aqueous solution of 2 m NaClO4 (2M-0.3 electrolyte). The 2M-0.3 electrolyte exhibits sufficient ionic conductivity of 0.11 mS cm-1 at -50 °C. The combination of spectroscopic investigations and molecular dynamics (MD) simulations reveal that hydrogen bonds are stably formed between DMSO and water molecules, facilitating the operation of the electrolyte at ultra-low T. Using DMSO as the electrolyte additive, the aqueous rechargeable alkali-ion batteries (AABs) can work well even at -50 °C. This work provides a simple and effective strategy to develop low T AABs.
Antifreezing Functionalized-Alginate-Based Electrolytes for Zinc-Ion Batteries

Yuan Gao,Caiting Gu,Zhongdong Tian,Silong Tian,Shilu zhang,Fengwei Shi,Jun Mei

DOI: https://doi.org/10.1016/j.jpowsour.2024.235776

IF: 9.2

2025-01-01

Journal of Power Sources

Abstract:Flexible zinc-ion batteries (ZIBs) assembled with hydrogel electrolyte are considered as promising flexible energy storage devices because of their inherent safety and versatility. However, the ionic conductivity and mechanical properties of most hydrogel electrolytes are not satisfactory, Furthermore, they will freeze at subzero temperature due to existing water. In this work, a freezing resistant polycarboxylic double network gel electrolyte (SIP-CS) with high ionic conductivity (14.36 mS cm⁻1 at −20 °C) and excellent mechanical property (fracture stress of 241.5 kPa and fracture strain of 1011 %) is prepared. Iminodiacetic acid (IDA) is applied to modify the alginate mainchains with many -COOH groups, which could provide channels for ion migration and endow hydrogel with high ionic conductivity. Additionally, sorbitol, containing lots of hydroxyl groups, is applied as a cryoprotectant to enhance the subzero performance of the electrolyte, because sorbitol could break the hydrogen bonds between water molecules, inhibit the formation of ice crystals, and reduce the freezing point of the gel electrolyte. The freezing point of SIP-CS is −37.0 °C, enabling the electrolyte to perform well at low temperatures. The flexible quasi solid Zn-MnO2 battery is assembled to evaluate the low-temperature electrochemical performance of SIP-CS. The assembled Zn-MnO2 battery shows good cycling and stable electrochemical performance, which proves the excellent antifreezing property of SIP-CS. This work provides a new strategy for preparing an electrolyte with good withstand low-temperature capability.
An aqueous magnesium-ion battery working at −50 °C enabled by modulating electrolyte structure

Guoshen Yang,Xianqi Xu,Gangrui Qu,Jie Deng,Yachao Zhu,Chi Fang,Olivier Fontaine,Pritesh Hiralal,Jiaxin Zheng,Hang Zhou

DOI: https://doi.org/10.1016/j.cej.2022.140806

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:The earth-abundant magnesium resource and aqueous electrolyte make aqueous magnesium-ion batteries (AMIBs) a promising post-lithium-ion battery technology to synchronously address cost and safety concerns. Nonetheless, the freeze issue of aqueous electrolytes is curbing the development of AMIBs working at low-temperature conditions. Here, we report an MgCl2 solution having a great low-temperature property via anion and concentration adjustment, which roots in the variation of the pristine hydrogen bond reticulation. Consequently, a 4 M MgCl2 aqueous electrolyte endows a low freezing point (−62 °C) as well as ultra-high ionic conductivity (2.77 mS/cm at −50 °C). By using 4 M MgCl2 as an electrolyte, the MnO2//VO2 battery is capable of working in a wide temperature range from +25 to −50 °C, achieving a high discharge capacity of 97.9 mAh/g (0.1 A/g) and a high cycling capability of 1000 cycles (∼90 % capacity retention at −20 °C). Furthermore, MgCl2 can be well compatible with polyacrylamide into an outstanding hydrogel electrolyte (in terms of mechanical property, anti-freeze performance, and high ionic conductivity) for a flexible quasi-solid-state MIBs application. The assembled flexible device attains appealing electrochemical properties across a broad temperature region, while the constructed pouch cell demonstrates superior flexibility and reliable safety. Our current exploration depicts an expeditious but productive paradigm for devising the high-performing AMIBs for low-temperature energy storage sectors.

engineering, chemical, environmental
Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na3SbS4 at Extremely Low Temperatures

Hui Wang,Yan Chen,Zachary D. Hood,Jong Kahk Keum,Amaresh Samuthira Pandian,Miaofang Chi,Ke An,Chengdu Liang,Mahendra K. Sunkara

DOI: https://doi.org/10.1021/acsaem.8b01449

IF: 6.4

2018-01-01

ACS Applied Energy Materials

Abstract:All-solid-state batteries that employ superionic solid conductor potentially enable the broadening of battery operation in harsh environments, such as under subzero temperatures and even lower. The solid electrolyte as the key component requires structural stability, high-efficiency of ion transportation channels, and low activation energy to maintain the fast-ionic conduction against temperature drop. Herein, we use 3D superionic conductor Na3SbS4 as a model to investigate the structure and conductive mechanism at extremely low temperature. Cryogenic in situ neutron and X-ray diffractions reveal that Na3SbS4 maintains a stable tetragonal crystal structure and the anisotropic lattice contraction upon cooling. The dimensions of the S-gate (represented by the S-S pair length) that Na ions hop through in the 3D transportation network is found to maintain open sizes in the xy-plane, contributing to the low activation energy and impressive ionic conductivity. The Na-ion transportation network is demonstrated to be directionally accessible at the extremely low temperature, which reveals the ion conductive mechanism at broadened temperature range in the view of structure. These findings provide valuable guidance in the search for materials as promising solid electrolyte in solid-state batteries to fulfill harsh environmental needs.
A “Two‐in‐One” Strategy for Flexible Aqueous Batteries Operated at −80 °C

Yin Hu,Rongwei Shi,Yongyuan Ren,Wansu Peng,Chengdong Feng,Yan Zhao,Sijie Zheng,Weizheng Li,Zhe Sun,Jiangna Guo,Siyu Guo,Xiaoliang Wang,Feng Yan

DOI: https://doi.org/10.1002/adfm.202203081

IF: 19

2022-04-05

Advanced Functional Materials

Abstract:Inspired by the antifreezing properties of alcohol cryoprotective agents, a "two‐in‐one" cryoprotective agent, hydroxyl‐functionalized poly(ionic liquid) (PIL‐OH)‐based hydrogel electrolyte, with a low temperature adaptability and high ionic conductivity at −80 °C (0.08 mS cm−1) is prepared. The PIL‐OH hydrogel‐based flexible aqueous lithium‐ion batteries can be operated at an ultralow temperature of −80 °C.The development of aqueous metal‐ion batteries has attracted great attention due to their relatively low cost and high safety levels. However, their practical applications are hindered by the ease at which their aqueous electrolytes freeze. Inspired by the antifreezing properties of salts and alcohol cryoprotective agents, a "two‐in‐one" cryoprotective agent, hydroxyl‐functionalized poly(ionic liquid) (PIL‐OH)‐based hydrogel electrolyte for aqueous lithium‐ion batteries (ALIBs) is developed. The synergy of both ionic hydration and hydrogen bond interactions between the PIL‐OH and water molecules impairs the hydrogen‐bond networks of water and depresses the freezing point of water below −80 °C. Benefiting from exceptional ultralow temperature tolerance, the prepared PIL‐OH hydrogel exhibits a highly enhanced low temperature adaptability and a high ionic conductivity of 0.08 mS cm−1 at −80 °C. The PIL‐OH hydrogel‐based flexible ALIBs exhibit high flexible durability and good cycling stability with 93% capacity retention over 200 cycles at −80 °C. The PIL‐OH hydrogel report herein opens up new opportunities for practical applications of wearable and flexible aqueous batteries at ultralow temperature environments, such as the North and South Poles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
An anti-freezing and anti-drying multifunctional gel electrolyte for flexible aqueous zinc-ion batteries

Rui Wang,Minjie Yao,Shuo Huang,Jinlei Tian,Zhiqiang Niu

DOI: https://doi.org/10.1007/s40843-021-1924-2

2022-01-12

Science China Materials

Abstract:Aqueous zinc-ion batteries (ZIBs) have attracted immense attention for flexible energy storage devices due to their high safety and low cost. However, conventional flexible aqueous ZIBs will undergo severe capacity loss at subzero temperature due to the inevitably freeze of electrolytes. In addition, under large bending or stretching strains, the encapsulation of devices would be damaged, which causes the evaporation of water in electrolytes and results in device failure. Herein, an anti-freezing and anti-drying gel electrolyte based on polyacrylamide (PAM) and glycerol (Gly) is developed. The strong hydrogen-bonding interactions between PAM or Gly and water molecules not only avoid the crystallization of the gel electrolyte at low temperatures, but also constrain the free water and restrict its evaporation. Therefore, such gel electrolyte displays a high ionic conductivity of 9.65 × 10−5 S cm−1 at −40°C. Furthermore, it can restrict the dehydration process when the electrolyte is exposed to ambient environment. The flexible ZIBs based on such gel electrolyte exhibit excellent electrochemical performance at −40°C and the devices without encapsulation retain 98% of their initial capacity in ambient condition after 30 days. This work provides a route to design anti-freezing and anti-drying gel electrolytes for aqueous energy storage devices.

materials science, multidisciplinary
Aggregate-Dominated Dilute Electrolytes with Low-Temperature-Resistant Ion-Conducting Channels for Highly Reversible Na Plating/Stripping

Bingcheng Ge,Jiaojiao Deng,Zhijie Wang,Qinghua Liang,Liang Hu,Xiuyun Ren,Runmin Li,Yuxiao Lin,Yunsong Li,Qingrong Wang,Bin Han,Yonghong Deng,Xiulin Fan,Baohua Li,Guohua Chen,Xiaoliang Yu

DOI: https://doi.org/10.1002/adma.202408161

2024-08-13

Abstract:Developing rechargeable batteries with high power delivery at low temperatures (LT) below 0 °C is significant for cold-climate applications. Initial anode-free sodium metal batteries (AFSMBs) promise high LT performances because of the low de-solvation energy and smaller Stokes radius of Na+, nondiffusion-limited plating/stripping electrochemistry, and maximized energy density. However, the severe reduction in electrolyte ionic conductivity and formation of unstable solid electrolyte interphase (SEI) hinder their practical applications at LT. In this study, a 2-methyltetrahydrofuran-based dilute electrolyte is designed to concurrently achieve an anion-coordinated solvation structure and impressive ionic conductivity of 3.58 mS cm-1 at -40 °C. The dominant aggregate solvates enable the formation of highly efficient and LT-resistant Na+ hopping channels in the electrolyte. Moreover, the methyl-regulated electronic structure in 2-methyltetrahydrofuran induces gradient decomposition toward an inorganic-organic bilayer SEI with high Na+ mobility, composition homogeneity, and mechanical robustness. As such, a record-high Coulombic efficiency beyond 99.9% is achieved even at -40 °C. The as-constructed AFSMBs sustain 300 cycles with 80% capacity maintained, and a 0.5-Ah level pouch cell delivers 85% capacity over 180 cycles at -25 °C. This study affords new insights into electrolyte formulation for fast ionic conduction and superior Na reversibility at ultralow temperatures.
An aqueous zinc‐ion battery working at −50°C enabled by low‐concentration perchlorate‐based chaotropic salt electrolyte

Guoshen Yang,Jialei Huang,Xuhao Wan,Binbin Liu,Yachao Zhu,Jiawei Wang,Olivier Fontaine,Shiqiang Luo,Pritesh Hiralal,Yuzheng Guo,Hang Zhou

DOI: https://doi.org/10.1002/eom2.12165

2022-01-12

EcoMat

Abstract:Rechargeable aqueous zinc‐ion batteries (ZIBs) have been considered as a promising candidate for the large‐scale energy storage device owing to their low cost and high safety. However, the practical application of aqueous ZIBs at low temperature environment is hindered by the freezing aqueous electrolytes, which leads to a sharp drop in ionic conductivity, and thereby a rapid deterioration of battery performance. Herein, a chaotropic salt electrolyte based on low concentration aqueous Zn(ClO4)2 with superior ionic conductivity under low temperature (4.23 mS/cm at −50°C) is reported. The anti‐freezing methodology introduced here is completely different from conventional freeze‐resistant design of using “water‐in‐salt” electrolyte, cosolvents, or anti‐freezing agent additives strategy. Experimental analysis and molecular dynamics simulations reveal that the as‐prepared Zn(ClO4)2 electrolyte possesses faster ionic migration compared with other commonly used Zn‐based salts (i.e., Zn(CF3SO3)2 and ZnSO4) electrolyte. It is found that Zn(ClO4)2 electrolyte can suppress the ice crystal construction by forming more hydrogen bonds between solute ClO4− and solvent H2O molecules, thus leading to a superior anti‐freezing property. The fabricated ZIBs using this aqueous electrolyte exhibits a dramatically enhanced specific capacity, remarkable rate capability, and great cycling stability over a wide temperature range, from −50 to 25°C. The aqueous ZIBs also exhibit an outstanding energy density of 238.4 Wh/kg without compromising the power density (7.9 kW/kg) under −20°C. Moreover, the assembled aqueous ZIBs can also cycle stably over 1000 cycles at an ultra‐low −50°C. The high‐safety and cost‐effective chaotropic salt electrolyte presented here is a promising strategy for low temperature energy storage application. A cost‐effective, anti‐freezing, and high ionic conductivity Zn(ClO4)2 chaotropic salt electrolyte is discovered and applied in low‐temperature aqueous zinc‐ion battery.

English Else
High-voltage Aqueous Planar Symmetric Sodium Ion Micro-Batteries with Superior Performance at Low-Temperature of −40 ºc

Xiao Wang,Huijuan Huang,Feng Zhou,Pratteek Das,Pengchao Wen,Shuanghao Zheng,Pengfei Lu,Yan Yu,Zhong-Shuai Wu

DOI: https://doi.org/10.1016/j.nanoen.2020.105688

IF: 17.6

2021-01-01

Nano Energy

Abstract:Aqueous sodium ion micro-batteries (ANIMBs) hold great promise in smart wearable microelectronics due to the abundant reserves, low cost and high safety of sodium. However, their applications are substantially hindered by the narrow electrochemical stability window of aqueous electrolytes within a limited temperature range. Herein, we report a prototype of high-voltage planar ANIMBs based on symmetric interdigital microelectrodes working in water-in-salt (WiS) electrolyte (17 M NaClO4) and displaying exceptional performance at low temperature. This work features nanoflower Na3V2(PO4)3 (NVP)-based electrodes with perfectly matched voltage range as both anode and cathode in the WiS electrolyte operating in a widened electrochemical stability window (2.7 V vs. Na+/Na) under ultralow freezing point of -50 ?C. The resulting ANIMBs with interdigital in-plane geometry deliver remarkable volumetric capacity of 45 mAh/cm3 and energy density of 77 mWh/cm3, which are superior to most reported sodium-based micropower sources. Notably, the NVP||NaClO4||NVP micro-batteries exhibit a high coulombic efficiency of > 99% at room temperature down to -40 ?C. Furthermore, the NVP||NaClO4||NVP ANIMBs present admirable flexibility and modular integration. We believe that our ANIMBs can potentially enjoy wide market adoption ranging from domestic appliances to safe intelligent wearable microelectronics, especially those applications that need to be operated below freezing temperature.
Inexpensive Electrolyte with Double-site Hydrogen Bonding and Regulated Zn2+ Solvation Structure for Aqueous Zn-Ion Batteries Capable of High-rate and Ultra-long Low-Temperature Operation

Chaolin You,Ruoyu Wu,Xinhai Yuan,Jilei Ye,Lili Liu,Lijun Fu,Peng Han,Yuping Wu

DOI: https://doi.org/10.1039/d3ee01741a

2023-09-05

Energy and Environmental Sciences

Abstract:Aqueous Zn-ion batteries (AZIBs) present tremendous promise for large-scale energy storage owing to their intrinsically high safety, low cost and environmental friendliness. However, a huge challenge is the freezing of aqueous electrolytes at low temperature. Herein, we report the introduction of formamide (FA), a low-cost, safe co-solvent with high dielectric constant, as both a hydrogen bonding acceptor and donor, with an inexpensive zinc salt (zinc acetate), the hybrid electrolyte exhibits a low freezing point lower than –40 °C and high ionic conductivity under frozen environment. Experiments together with theoretical calculations demonstrate that FA can effectively anchor water molecules in a double-site hydrogen bonding interaction configuration and interrupt the original hydrogen bonding network, as well as confine free water activity, which significantly decreases the freezing point of the electrolyte and reduces the occurrence of hydrogen evolution reactions. In addition, the stronger coordination interaction between FA and Zn 2+ can regulate the solvation structure of Zn 2+ , replace the water in Zn 2+ solvation sheath, realize uniform Zn deposition, avoid the formation of dendrites and inhibit the corrosion on Zn surface. Consequently, ultralong cycling life of 9500 h at 0.5 mA cm –2 in the Zn||Zn symmetric cell at –30 °C, a record cycle stability and cumulative capacity among the reported electrolytes for low-temperature AZIBs, and high Coulombic efficiency of 99.91% in the Zn||Cu asymmetric cell are achieved.The Zn||PANI batteries with the designed electrolyte possess ultra-high stable reversible capacity (107 mAh g –1 at 1 A g –1 for 22000 cycles and 121 mAh g –1 at 5 A g –1 for 5500 cycles) and excellent rate capability (124.8 mAh g –1 at 10 A g –1 ) at –30 °C. Even at –40 °C, Zn||PANI cells can cycle 6000 times with a capacity of 80 mAh g –1 at 5 A g –1 . This work provides a facile and feasible strategy to design inexpensive, stable and high-performance aqueous zinc ion batteries for applications at low temperatures.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Tuning the Electrolyte and Interphasial Chemistry for All‐Climate Sodium‐ion Batteries

Mengxue He,Lujun Zhu,Guo Ye,Yun An,Xufeng Hong,Yue Ma,Zhitong Xiao,Yongfeng Jia,Quanquan Pang

DOI: https://doi.org/10.1002/anie.202401051

2024-03-14

Angewandte Chemie International Edition

Abstract:Sodium-ion batteries (SIBs) present a promising avenue for next-generation grid-scale energy storage. However, realizing all-climate SIBs operating across a wide temperature range remains a challenge due to the poor electrolyte conductivity and instable electrode interphases at extreme temperatures. Here, we propose a comprehensively balanced electrolyte by pairing carbonates with a low-freezing-point and low-polarity ethyl propionate solvent which enhances ion diffusion and Na+-desolvation kinetics at sub-zero temperatures. Furthermore, the electrolyte leverages a combinatorial borate- and nitrile-based additive strategy to facilitate uniform and inorganic-rich electrode interphases, ensuring excellent rate performance and cycle stability over a wide temperature range from −45 °C to 60 °C. Notably, the Na||sodium vanadyl phosphate cell delivers a remarkable capacity of 105 mA h g−1 with a high rate of 2 C at −25 °C. In addition, the cells exhibit excellent cycling stability over a wide temperature range, maintaining a high capacity retention of 84.7% over 3,000 cycles at 60 °C and of 95.1% at −25 °C over 500 cycles. This study highlights the critical role of electrolyte and interphase engineering for enabling SIBs that function optimally under diverse and extreme climatic environments.

chemistry, multidisciplinary
Fast Ion Conduction Nanofiber Matrix Composite Electrolyte for Dendrite‐Free Solid‐State Sodium‐Ion Batteries with Wide Temperature Operation

Shuanglin Wu,Zhifeng Yu,Xiaolin Nie,Zhihui Wang,Fenglin Huang,Qufu Wei

DOI: https://doi.org/10.1002/aenm.202202930

IF: 27.8

2022-10-30

Advanced Energy Materials

Abstract:A rigid‐soft coupled nanofiber matrix composite electrolyte with salt dissociation and selective cation transport boosting is constructed by an in situ UV curing method. The flexible electrolyte exhibits low‐temperature adaptability and high‐temperature safety properties. What is more, the ultrathin binder‐free AlF3 layer on the electrolyte surface constructed by magnetron sputtering ensures a dendrite‐free anode. Sodium‐ion batteries (SIBs) based on solid‐state electrolytes (SSEs), although safe for high temperatures, are less capable of transferring ions at ambient temperatures, let alone at low temperatures. This work offers a simple and scalable technique to construct a nanofiber matrix composite electrolyte with boosting Na+ transport and interfacial compatibility for SIBs. Benefitting from the salt dissociation and selective cation conduction synergistic effect of the acylamino, carbonyl, and ester groups in the low‐cost copolymer synthesized from 2‐(methacryloyloxy)ethyl acetoacetate and N,N′‐methylenebisacrylamide, a facilitating of Na+ transport at extreme temperatures is realized. Besides, flexible flame retardance ceramic SiO2 nanofibers greatly enhance high‐temperature safety. The ultrathin functional AlF3 layer generated by binder‐free magnetron sputtering suppresses the dendrites, eliminating the interfacial issues between the electrolyte and anode, which is proved by 5500 h of ultrasteady plating/stripping. Superior ionic conductivity of 0.153 mS cm−1 at −30 °C implies fast Na+ transport, which is further evidenced by molecular dynamics simulations. Rate performance at 0.05–10 C from −30 to 130 °C further demonstrates the excellent electrochemical performance of the electrolyte. This work provides encouraging guidance for high‐safety SSEs with rapid Na+ conduction for SIBs operating at extra‐wide temperatures.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
High-voltage aqueous planar symmetric sodium ion micro-batteries with superior performance at low-temperature of −40 oC

Xiao Wang,Huijuan Huang,Feng Zhou,Pratteek Das,Pengchao Wen,Shuanghao Zheng,Pengfei Lu,Yan Yu,Zhong-Shuai Wu

DOI: https://doi.org/10.1016/j.nanoen.2020.105688

IF: 17.6

2021-04-01

Nano Energy

Abstract:Aqueous sodium ion micro-batteries (ANIMBs) hold great promise in smart wearable microelectronics due to the abundant reserves, low cost and high safety of sodium. However, their applications are substantially hindered by the narrow electrochemical stability window of aqueous electrolytes within a limited temperature range. Herein, we report a prototype of high-voltage planar ANIMBs based on symmetric interdigital microelectrodes working in water-in-salt (WiS) electrolyte (17 M NaClO4) and displaying exceptional performance at low temperature. This work features nanoflower Na3V2(PO4)3 (NVP)-based electrodes with perfectly matched voltage range as both anode and cathode in the WiS electrolyte operating in a widened electrochemical stability window (2.7 V vs. Na+/Na) under ultralow freezing point of −50 ºC. The resulting ANIMBs with interdigital in-plane geometry deliver remarkable volumetric capacity of 45 mAh/cm3 and energy density of 77 mWh/cm3, which are superior to most reported sodium-based micropower sources. Notably, the NVP||NaClO4||NVP micro-batteries exhibit a high coulombic efficiency of > 99% at room temperature down to −40 ºC. Furthermore, the NVP||NaClO4||NVP ANIMBs present admirable flexibility and modular integration. We believe that our ANIMBs can potentially enjoy wide market adoption ranging from domestic appliances to safe intelligent wearable microelectronics, especially those applications that need to be operated below freezing temperature.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Antifreezing Zwitterionic-Based Hydrogel Electrolyte for Aqueous Zn Ion Batteries

Chunmei Yuan,Xin Zhong,Peishu Tian,Zhe Wang,Guanghui Gao,Lianfeng Duan,Chunsheng Wang,Fengwei Shi

DOI: https://doi.org/10.1021/acsaem.2c01008

IF: 6.4

2022-06-10

ACS Applied Energy Materials

Abstract:Hydrogel electrolytes have attracted great attention because the properties of integrated conductivity and mechanical flexibility endow them with potential applications in flexible solid-state batteries. However, hydrogels are easy to freeze when the temperature drops below zero, resulting in the reduction of ionic conductivity and mechanical strength of hydrogels. Herein, an antifreezing polymer hydrogel electrolyte was developed by introducing a zwitterionic group and salt into the double-network polymer. The polymer hydrogel electrolyte possessed a perfect ionic conductivity of 10.38 mS cm–1 at −20 °C and could remain unfrozen until −50 °C. A flexible solid-state Zn//LiFePO4 battery assembled with the prepared hydrogel electrolyte exhibited a discharge capacity of 126.1 and 75.1 mAh g–1 at 20 and −20 °C at 1 C, respectively. In addition, it showed quite perfect cycling performance and maintained a capacity retention of 72.6% after 1000 cycles with a favorable Coulombic efficiency (∼100%) at −20 °C at 1 C. The hydrogel electrolyte with perfect antifreezing performance is supposed to broaden the range of working temperature and practical applications of the zinc ion battery.

materials science, multidisciplinary,chemistry, physical,energy & fuels
A Quasi‐Solid‐State Polyether Electrolyte for Low‐Temperature Sodium Metal Batteries

Tong Zhao,Xueying Zheng,Donghai Wang,Liqiang Huang,Bin Li,Xuyang Liu,Hao Yang,Yiming Dai,Yunhui Huang,Wei Luo

DOI: https://doi.org/10.1002/adfm.202304928

IF: 19

2023-07-19

Advanced Functional Materials

Abstract:A quasi‐solid‐state polyether electrolyte is successfully prepared via in situ polymerization, which is suitable for sodium metal batteries at low temperatures. The weak solvation environment is tailored to form a higher local concentration of Na+. The solid electrolyte interphase including Na2O, NaF speeds up ions interfacial transport. Hence, the Na/Na3V2(PO4)3 cell exhibits great stability over 1000 cycles at −20 ◦C. Taken the unlimited Na reservoir worldwide, battery technology based on Na‐ion chemistry poses as an ideal candidate for large‐scale energy storage systems. Especially, with metallic Na replacing traditional carbon anodes, it's able to maximize the energy density inexpensively. Nevertheless, sodium metal batteries (SMBs) face intrinsically poor stability due to their highly‐reactive nature, where low Coulombic efficiency and short lifetime are often witnessed. The situation can be further aggravated at low temperatures due to insurmountable kinetic barriers. Herein, a 1,3‐dioxolane‐based quasi‐solid‐state electrolyte (PDGE) is proposed with a high ionic conductivity of 3.68 mS cm−1 even at −20 ◦C for SMBs. Moreover, a weak solvation environment is tailored by PDGE, which possesses a high Na+ transference number of 0.7. Concurrently, the solid electrolyte interphase induced from PDGE presents inorganic Na2O, NaF as the major components, which offers accelerated Na+ diffusion and superior stability upon long‐term cycling. With such a quasi‐solid‐state electrolyte, the Na/Na3V2(PO4)3 full cell exhibits great stability over 1000 cycles at −20 ◦C. This study has significant implications to the development for SMBs under low‐temperature conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Molecular cloning of rat uncoupling protein 2 cDNA and its expression in genetically obese Zucker fatty (fa/fa) rats.

Cost attractive hydrogel electrolyte for low temperature aqueous sodium ion batteries

Dilute Hybrid Electrolyte for Low Temperature Aqueous Sodium Ion Batteries

Regulating Ion‐Dipole Interactions in Weakly Solvating Electrolyte towards Ultra‐Low Temperature Sodium‐Ion Batteries

An Anti‐Freezing Hydrogel Electrolyte for Flexible Zinc‐Ion Batteries Operating at −70 °C

Monolithic Interphase Enables Fast Kinetics for High‐Performance Sodium‐Ion Batteries at Subzero Temperature

Aqueous Batteries Operated at -50 °C

Antifreezing Functionalized-Alginate-Based Electrolytes for Zinc-Ion Batteries

An aqueous magnesium-ion battery working at −50 °C enabled by modulating electrolyte structure

Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na3SbS4 at Extremely Low Temperatures

A “Two‐in‐One” Strategy for Flexible Aqueous Batteries Operated at −80 °C

An anti-freezing and anti-drying multifunctional gel electrolyte for flexible aqueous zinc-ion batteries

Aggregate-Dominated Dilute Electrolytes with Low-Temperature-Resistant Ion-Conducting Channels for Highly Reversible Na Plating/Stripping

An aqueous zinc‐ion battery working at −50°C enabled by low‐concentration perchlorate‐based chaotropic salt electrolyte

High-voltage Aqueous Planar Symmetric Sodium Ion Micro-Batteries with Superior Performance at Low-Temperature of −40 ºc

Inexpensive Electrolyte with Double-site Hydrogen Bonding and Regulated Zn2+ Solvation Structure for Aqueous Zn-Ion Batteries Capable of High-rate and Ultra-long Low-Temperature Operation

Tuning the Electrolyte and Interphasial Chemistry for All‐Climate Sodium‐ion Batteries

Fast Ion Conduction Nanofiber Matrix Composite Electrolyte for Dendrite‐Free Solid‐State Sodium‐Ion Batteries with Wide Temperature Operation

High-voltage aqueous planar symmetric sodium ion micro-batteries with superior performance at low-temperature of −40 oC

Antifreezing Zwitterionic-Based Hydrogel Electrolyte for Aqueous Zn Ion Batteries

A Quasi‐Solid‐State Polyether Electrolyte for Low‐Temperature Sodium Metal Batteries