Abstract:Corrosion is a major source of degradation in heritage metal objects, and any remedial measures are subject to a strong (Western) ethic that favors conservation as opposed to restoration. Accordingly, major scientific challenges exist for developing appropriate treatment methods to stabilize and protect artifacts after they are recovered from an archaeological site, both before and during their display or storage in a museum. Because inappropriate treatments can cause irreversible damage to irreplaceable objects, it is crucial that the chemical processes involved are fully understood and characterized before any preservation work is undertaken. In this regard, large infrastructural facilities such as synchrotrons, neutron sources, and particle accelerators provide a wealth of analytical possibilities, unavailable in smaller scale laboratories. In general, the intensity of the radiation available allows measurements on a short time scale or with high spatial resolution (or both), so heterogeneous changes induced by a chemical process can be recorded while they occur. The penetrative nature of the radiation (e.g., X-rays, protons, or neutrons) also allows a sample to be studied in air. If necessary, complete artifacts (such as paintings or statuettes) can be examined. In situ analysis in a controlled environment, such as a liquid or corrosive atmosphere, also becomes an exciting possibility. Finally, there are many complementary techniques (local atomic structure or crystal structure determination, macroscopic 3-D imaging (tomographies), imaging chemical analysis, and so on) so the many distinct details of a problem can be thoroughly explored. In this Account, we discuss the application of this general philosophy to studies of corrosion and its prevention in cultural heritage metals, focusing on our recent work on copper alloys. More specifically, we use synchrotron-based techniques to evaluate the use of corrosion potential measurements as a possible monitoring method for copper-based objects recovered from marine environments. The extraction of chlorides from such artifacts is a process that must take place before the artifacts are put on display or stored, because air exposure of untreated metal will result in severe damage or loss in as little as a few weeks. Chloride is removed by soaking the artifact for up to two years in tap water or dilute sodium sesquicarbonate, with regular solution changes. Our research supports the effectiveness of this treatment for thin nantokite (copper(I) chloride) layers, but it raises questions for copper hydroxychlorides (atacamite and paratacamite), especially when these minerals are trapped in fissures. Electrochemical parameters such as the corrosion potential are shown to be insensitive to the physical presence of large hydroxychloride coverages if they overlie a cuprite (Cu(2)O) layer. X-ray absorption spectroscopy proves to be a good monitor for the chloride in solution over the working electrode, whereas X-ray diffraction offers the potential for real-time measurement of the surface chloride composition. In principle, the two techniques together offer the possibility of monitoring surface and fluid levels simultaneously.

Microscale Corrosion Inhibition Behavior of Four Corrosion Inhibitors (BTA, MBI, MBT, and MBO) on Archeological Silver Artifacts Based on Scanning Electrochemical Cell Microscopy

Scanning Electrochemical Cell Microscopy: A Powerful Method to Study the Intergranular Corrosions of Archaeological Silver Artifacts

A Comparison Study of the Performance of Three Electro-Migrating Corrosion Inhibitors in Improving the Concrete Durability and Rehabilitating Decayed Reinforced Concrete

Optimizing the Thermal Treatment for Restoration of Brittle Archaeological Silver Artifacts

The coordinated use of synchrotron spectroelectrochemistry for corrosion studies on heritage metals

A Review on Green Corrosion Inhibitors for Protection of Archeological Metal Artifacts

Organic Green Corrosion Inhibitors Derived from Natural and/or Biological Sources for Conservation of Metals Cultural Heritage

Early Stages of Metal Corrosion in Coastal Archaeological Sites: Effects of Chemical Composition in Silver and Copper Alloys

The sulfidation process of sterling silver in different corrosive environments: impact of the process on the surface films formed and consequences for the conservation-restoration community

Comparative study of the efficiency of inhibitors and coatings for bronze artifacts

A Technical Examination of the Corrosion and Microstructural Features of Copper Alloy Artifacts from the Byzantine Period at Khirbet Yajuz, Jordan

Corrosion Inhibition and Rust Conversion of Catechin on Archaeological Iron of Nanhai I

Temporal Aspects of Corrosion Inhibition on Copper, Silver, and Copper-Silver Alloy: An Electrochemical Impedance Spectroscopy Study

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

Study of corrosion in archaeological gilded irons by Raman imaging and a coupled scanning electron microscope-Raman system

Understanding the Unique Corrosion Phenomenon of Sanxingdui Embrittled Gold Masks Using Scanning Electrochemical Cell Microscopy (SECCM): Intergranular Corrosion of Au-Ag-Pb Ternary Alloy

Analytical investigation and electrochemical conservation treatment for archaeological copper alloy artifacts from Jordan

A Sustainable Approach for Protection of Historical and Archeological Copper-Based Artifacts from Corrosion by Polymeric Coatings

Corrosion inhibition of copper alloy of archaeological artifacts in chloride salt solution using Aloe vera green inhibitor

Ionic Liquid as Water Soluble and Potential Inhibitor for Corrosion and Microbial Corrosion for Iron Artifacts

Evaluation of the inhibitive effect of benzotriazole on archeological bronze in acidic medium